[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240423-usb-dts-gs101-v1-2-3421b0371298@linaro.org>
Date: Tue, 23 Apr 2024 21:52:49 +0100
From: André Draszik <andre.draszik@...aro.org>
To: Peter Griffin <peter.griffin@...aro.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Alim Akhtar <alim.akhtar@...sung.com>
Cc: Tudor Ambarus <tudor.ambarus@...aro.org>,
Will McVicker <willmcvicker@...gle.com>, Roy Luo <royluo@...gle.com>,
kernel-team@...roid.com, linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
André Draszik <andre.draszik@...aro.org>
Subject: [PATCH 2/2] arm64: dts: exynos: gs101-oriole: enable USB on this
board
Pixel 6 (Oriole) has a USB-C connector that can act as host or device.
The USB role is detected dynamically using a MAX77759 TCPCI controller,
but since there is no driver for the MAX77759, the role is defaulted to
peripheral, without any endpoints / ports.
This allows Oriole to be configured as a gadget, e.g. using configfs.
As PMIC regulators are not implemented yet, we rely on USB LDOs being
enabled enabled by the bootloader. A placeholder regulator is used for
now.
Signed-off-by: André Draszik <andre.draszik@...aro.org>
---
arch/arm64/boot/dts/exynos/google/gs101-oriole.dts | 24 ++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
index 6be15e990b65..03b2a6fdfdc4 100644
--- a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
+++ b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
@@ -53,6 +53,12 @@ button-power {
wakeup-source;
};
};
+
+ /* TODO: Remove this once PMIC is implemented */
+ reg_placeholder: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "placeholder_reg";
+ };
};
&ext_24_5m {
@@ -106,6 +112,24 @@ &serial_0 {
status = "okay";
};
+&usbdrd31 {
+ status = "okay";
+ vdd10-supply = <®_placeholder>;
+ vdd33-supply = <®_placeholder>;
+};
+
+&usbdrd31_dwc3 {
+ dr_mode = "otg";
+ usb-role-switch;
+ role-switch-default-mode = "peripheral";
+ maximum-speed = "super-speed-plus";
+ status = "okay";
+};
+
+&usbdrd31_phy {
+ status = "okay";
+};
+
&usi_uart {
samsung,clkreq-on; /* needed for UART mode */
status = "okay";
--
2.44.0.769.g3c40516874-goog
Powered by blists - more mailing lists