[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAMuHMdVnKX23yi7ir1LVxfXAMeeWMFzM+cdgSSTNjpn1OnC2xw@mail.gmail.com>
Date: Tue, 23 Apr 2024 11:42:12 +0200
From: Geert Uytterhoeven <geert@...ux-m68k.org>
To: Thomas Richard <thomas.richard@...tlin.com>
Cc: Linus Walleij <linus.walleij@...aro.org>, Bartosz Golaszewski <brgl@...ev.pl>,
Tony Lindgren <tony@...mide.com>, Aaro Koskinen <aaro.koskinen@....fi>,
Janusz Krzysztofik <jmkrzyszt@...il.com>, Vignesh R <vigneshr@...com>,
Andi Shyti <andi.shyti@...nel.org>, Peter Rosin <peda@...ntia.se>,
Lorenzo Pieralisi <lpieralisi@...nel.org>, Krzysztof Wilczyński <kw@...ux.com>,
Rob Herring <robh@...nel.org>, Bjorn Helgaas <bhelgaas@...gle.com>,
Siddharth Vadapalli <s-vadapalli@...com>, linux-gpio@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-omap@...r.kernel.org,
linux-i2c@...r.kernel.org, linux-pci@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, gregory.clement@...tlin.com,
theo.lebrun@...tlin.com, thomas.petazzoni@...tlin.com, u-kumar1@...com,
Bartosz Golaszewski <bartosz.golaszewski@...aro.org>,
Andy Shevchenko <andy.shevchenko@...il.com>, Wolfram Sang <wsa+renesas@...g-engineering.com>,
Linux-Renesas <linux-renesas-soc@...r.kernel.org>
Subject: Re: [PATCH v5 01/11] gpio: pca953x: move suspend()/resume() to suspend_noirq()/resume_noirq()
Hi Thomas,
On Tue, Apr 16, 2024 at 3:31 PM Thomas Richard
<thomas.richard@...tlin.com> wrote:
> Some IOs can be needed during suspend_noirq()/resume_noirq().
> So move suspend()/resume() to noirq.
>
> Reviewed-by: Andi Shyti <andi.shyti@...nel.org>
> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@...il.com>
> Reviewed-by: Linus Walleij <linus.walleij@...aro.org>
> Signed-off-by: Thomas Richard <thomas.richard@...tlin.com>
Thanks for your patch, which is now commit 86eb98127332748f ("gpio:
pca953x: move suspend()/resume() to suspend_noirq()/resume_noirq()")
in i2c-host/i2c/i2c-host.
This patch causes regressions on e.g. Salvator-XS.
s2idle:
Freezing user space processes
Freezing user space processes completed (elapsed 0.006 seconds)
OOM killer disabled.
Freezing remaining freezable tasks
Freezing remaining freezable tasks completed (elapsed 0.003 seconds)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ata1.00: Entering standby power mode
+i2c-rcar e66d8000.i2c: error -16 : 10000005
+pca953x 4-0020: Failed to sync GPIO dir registers: -16
+pca953x 4-0020: Failed to restore register map: -16
+pca953x 4-0020: PM: dpm_run_callback(): pca953x_resume_noirq
returns -16
+pca953x 4-0020: PM: failed to resume async noirq: error -16
s2ram:
Detected VIPT I-cache on CPU7
CPU7: Booted secondary processor 0x0000000103 [0x410fd034]
CPU7 is up
+i2c-rcar e66d8000.i2c: error -110 : 10000001
+pca953x 4-0020: Failed to sync GPIO dir registers: -110
+pca953x 4-0020: Failed to restore register map: -110
+pca953x 4-0020: PM: dpm_run_callback(): pca953x_resume_noirq
returns -110
+pca953x 4-0020: PM: failed to resume async noirq: error -110
usb usb1: root hub lost power or was reset
...
PM: suspend exit
ata1: link resume succeeded after 1 retries
-ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
-sd 0:0:0:0: [sda] Starting disk
-ata1.00: configured for UDMA/133
-ata1.00: Entering active power mode
+ata1: SATA link down (SStatus 0 SControl 300)
+ata1: link resume succeeded after 1 retries
+ata1: SATA link down (SStatus 0 SControl 300)
+ata1: limiting SATA link speed to <unknown>
+ata1: link resume succeeded after 1 retries
+ata1: SATA link down (SStatus 0 SControl 3F0)
+ata1.00: disable device
+ata1.00: detaching (SCSI 0:0:0:0)
+sd 0:0:0:0: [sda] Synchronizing SCSI cache
+sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result:
hostbyte=0x04 driverbyte=DRIVER_OK
When trying to read from /dev/sda afterwards:
ata1: link resume succeeded after 1 retries
ata1: SATA link down (SStatus 0 SControl 3F0)
ata1.00: disable device
ata1.00: detaching (SCSI 0:0:0:0)
device offline error, dev sda, sector 0 op 0x0:(READ) flags
0x80700 phys_seg 4 prio class 0
device offline error, dev sda, sector 0 op 0x0:(READ) flags
0x0 phys_seg 1 prio class 0
Buffer I/O error on dev sda, logical block 0, async page read
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result:
hostbyte=0x04 driverbyte=DRIVER_OK
All issues above are fixed by reverting this commit.
> --- a/drivers/gpio/gpio-pca953x.c
> +++ b/drivers/gpio/gpio-pca953x.c
> @@ -1234,7 +1234,7 @@ static void pca953x_save_context(struct pca953x_chip *chip)
> regcache_cache_only(chip->regmap, true);
> }
>
> -static int pca953x_suspend(struct device *dev)
> +static int pca953x_suspend_noirq(struct device *dev)
> {
> struct pca953x_chip *chip = dev_get_drvdata(dev);
>
> @@ -1248,7 +1248,7 @@ static int pca953x_suspend(struct device *dev)
> return 0;
> }
>
> -static int pca953x_resume(struct device *dev)
> +static int pca953x_resume_noirq(struct device *dev)
> {
> struct pca953x_chip *chip = dev_get_drvdata(dev);
> int ret;
> @@ -1268,7 +1268,8 @@ static int pca953x_resume(struct device *dev)
> return ret;
> }
>
> -static DEFINE_SIMPLE_DEV_PM_OPS(pca953x_pm_ops, pca953x_suspend, pca953x_resume);
> +static DEFINE_NOIRQ_DEV_PM_OPS(pca953x_pm_ops,
> + pca953x_suspend_noirq, pca953x_resume_noirq);
>
> /* convenience to stop overlong match-table lines */
> #define OF_653X(__nrgpio, __int) ((void *)(__nrgpio | PCAL653X_TYPE | __int))
>
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@...ux-m68korg
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Powered by blists - more mailing lists