| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240423-for-soc-asus-rt-ac3200-ac5300-v3-3-23d33cfafe7a@arinc9.com>
Date: Tue, 23 Apr 2024 12:50:47 +0300
From: Arınç ÜNAL via B4 Relay <devnull+arinc.unal.arinc9.com@...nel.org>
To: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Florian Fainelli <f.fainelli@...il.com>,
Hauke Mehrtens <hauke@...ke-m.de>, Rafal Milecki <zajec5@...il.com>,
Florian Fainelli <florian.fainelli@...adcom.com>,
Broadcom internal kernel review list <bcm-kernel-feedback-list@...adcom.com>
Cc: Tom Brautaset <tbrautaset@...il.com>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
Arınç ÜNAL <arinc.unal@...nc9.com>
Subject: [PATCH v3 3/5] ARM: dts: BCM5301X: Add DT for ASUS RT-AC3200
From: Arınç ÜNAL <arinc.unal@...nc9.com>
Add the device tree for ASUS RT-AC3200 which is an AC3200 router featuring
5 Ethernet ports over the integrated Broadcom switch.
Hardware info:
* Processor: Broadcom BCM4709A0 dual-core @ 1.0 GHz
* Switch: BCM53012 in BCM4709A0
* DDR3 RAM: 256 MB
* Flash: 128 MB
* 2.4GHz: BCM43602 3x3 single chip 802.11b/g/n SoC
* 5GHz: BCM43602 3x3 two chips 802.11a/n/ac SoC
* Ports: 4 LAN Ports, 1 WAN Port
Co-developed-by: Tom Brautaset <tbrautaset@...il.com>
Signed-off-by: Tom Brautaset <tbrautaset@...il.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@...nc9.com>
---
arch/arm/boot/dts/broadcom/Makefile | 1 +
.../boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts | 150 +++++++++++++++++++++
2 files changed, 151 insertions(+)
diff --git a/arch/arm/boot/dts/broadcom/Makefile b/arch/arm/boot/dts/broadcom/Makefile
index 7099d9560033..c61fca514775 100644
--- a/arch/arm/boot/dts/broadcom/Makefile
+++ b/arch/arm/boot/dts/broadcom/Makefile
@@ -64,6 +64,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm47081-luxul-xap-1410.dtb \
bcm47081-luxul-xwr-1200.dtb \
bcm47081-tplink-archer-c5-v2.dtb \
+ bcm4709-asus-rt-ac3200.dtb \
bcm4709-asus-rt-ac87u.dtb \
bcm4709-buffalo-wxr-1900dhp.dtb \
bcm4709-linksys-ea9200.dtb \
diff --git a/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts
new file mode 100644
index 000000000000..53cb0c58f6d0
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Author: Tom Brautaset <tbrautaset@...il.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+ compatible = "asus,rt-ac3200", "brcm,bcm4709", "brcm,bcm4708";
+ model = "ASUS RT-AC3200";
+
+ memory@0 {
+ reg = <0x00000000 0x08000000>,
+ <0x88000000 0x08000000>;
+ device_type = "memory";
+ };
+
+ nvram@...80000 {
+ compatible = "brcm,nvram";
+ reg = <0x1c080000 0x00180000>;
+
+ et0macaddr: et0macaddr {
+ #nvmem-cell-cells = <1>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ button-reset {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ };
+
+ button-wifi {
+ label = "Wi-Fi";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+ };
+
+ button-wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-power {
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_POWER;
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ led-wan-red {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_WAN;
+ gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-wps {
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_WPS;
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gmac0 {
+ nvmem-cells = <&et0macaddr 0>;
+ nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+ nvmem-cells = <&et0macaddr 1>;
+ nvmem-cell-names = "mac-address";
+};
+
+&gmac2 {
+ nvmem-cells = <&et0macaddr 2>;
+ nvmem-cell-names = "mac-address";
+};
+
+&nandcs {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x00000000 0x00080000>;
+ label = "boot";
+ read-only;
+ };
+
+ partition@...00 {
+ reg = <0x00080000 0x00180000>;
+ label = "nvram";
+ };
+
+ partition@...000 {
+ compatible = "brcm,trx";
+ reg = <0x00200000 0x07e00000>;
+ label = "firmware";
+ };
+ };
+};
+
+&srab {
+ status = "okay";
+
+ ports {
+ port@0 {
+ label = "wan";
+ };
+
+ port@1 {
+ label = "lan1";
+ };
+
+ port@2 {
+ label = "lan2";
+ };
+
+ port@3 {
+ label = "lan3";
+ };
+
+ port@4 {
+ label = "lan4";
+ };
+ };
+};
+
+&usb2 {
+ vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+ status = "okay";
+};
--
2.40.1
Powered by blists - more mailing lists