| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240424-pxa1908-lkml-v10-7-36cdfb5841f9@skole.hr>
Date: Wed, 24 Apr 2024 20:42:34 +0200
From: Duje Mihanović via B4 Relay <devnull+duje.mihanovic.skole.hr@...nel.org>
To: Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>, Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, Tony Lindgren <tony@...mide.com>,
Haojian Zhuang <haojian.zhuang@...aro.org>,
Duje Mihanović <duje.mihanovic@...le.hr>,
Lubomir Rintel <lkundrak@...sk>, Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will@...nel.org>, Kees Cook <keescook@...omium.org>,
Tony Luck <tony.luck@...el.com>,
"Guilherme G. Piccoli" <gpiccoli@...lia.com>, Rob Herring <robh@...nel.org>
Cc: phone-devel@...r.kernel.org, ~postmarketos/upstreaming@...ts.sr.ht,
Karel Balej <balejk@...fyz.cz>, David Wronek <david@...nlining.org>,
linux-clk@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Subject: [PATCH v10 07/12] clk: mmp: Add Marvell PXA1908 APMU driver
From: Duje Mihanović <duje.mihanovic@...le.hr>
Add driver for the APMU controller block found on Marvell's PXA1908 SoC.
This driver is incomplete, lacking support for (at least) GPU, VPU, DSI
and CCIC (camera related) clocks.
Signed-off-by: Duje Mihanović <duje.mihanovic@...le.hr>
---
drivers/clk/mmp/Makefile | 2 +-
drivers/clk/mmp/clk-pxa1908-apmu.c | 123 +++++++++++++++++++++++++++++++++++++
2 files changed, 124 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/mmp/Makefile b/drivers/clk/mmp/Makefile
index 038bcd4d035e..a8b1a4b08824 100644
--- a/drivers/clk/mmp/Makefile
+++ b/drivers/clk/mmp/Makefile
@@ -11,4 +11,4 @@ obj-$(CONFIG_MACH_MMP_DT) += clk-of-pxa168.o clk-of-pxa910.o
obj-$(CONFIG_COMMON_CLK_MMP2) += clk-of-mmp2.o clk-pll.o pwr-island.o
obj-$(CONFIG_COMMON_CLK_MMP2_AUDIO) += clk-audio.o
-obj-$(CONFIG_ARCH_MMP) += clk-of-pxa1928.o clk-pxa1908-apbc.o clk-pxa1908-apbcp.o
+obj-$(CONFIG_ARCH_MMP) += clk-of-pxa1928.o clk-pxa1908-apbc.o clk-pxa1908-apbcp.o clk-pxa1908-apmu.o
diff --git a/drivers/clk/mmp/clk-pxa1908-apmu.c b/drivers/clk/mmp/clk-pxa1908-apmu.c
new file mode 100644
index 000000000000..693254539063
--- /dev/null
+++ b/drivers/clk/mmp/clk-pxa1908-apmu.c
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/bits.h>
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/units.h>
+
+#include <dt-bindings/clock/marvell,pxa1908.h>
+
+#include "clk.h"
+
+#define APMU_CLK_GATE_CTRL 0x40
+#define APMU_CCIC1 0x24
+#define APMU_ISP 0x38
+#define APMU_DSI1 0x44
+#define APMU_DISP1 0x4c
+#define APMU_CCIC0 0x50
+#define APMU_SDH0 0x54
+#define APMU_SDH1 0x58
+#define APMU_USB 0x5c
+#define APMU_NF 0x60
+#define APMU_VPU 0xa4
+#define APMU_GC 0xcc
+#define APMU_SDH2 0xe0
+#define APMU_GC2D 0xf4
+#define APMU_TRACE 0x108
+#define APMU_DVC_DFC_DEBUG 0x140
+
+#define APMU_NR_CLKS 17
+
+struct pxa1908_clk_unit {
+ struct mmp_clk_unit unit;
+ void __iomem *base;
+};
+
+static DEFINE_SPINLOCK(pll1_lock);
+static struct mmp_param_general_gate_clk pll1_gate_clks[] = {
+ {PXA1908_CLK_PLL1_D2_GATE, "pll1_d2_gate", "pll1_d2", 0, APMU_CLK_GATE_CTRL, 29, 0, &pll1_lock},
+ {PXA1908_CLK_PLL1_416_GATE, "pll1_416_gate", "pll1_416", 0, APMU_CLK_GATE_CTRL, 27, 0, &pll1_lock},
+ {PXA1908_CLK_PLL1_624_GATE, "pll1_624_gate", "pll1_624", 0, APMU_CLK_GATE_CTRL, 26, 0, &pll1_lock},
+ {PXA1908_CLK_PLL1_832_GATE, "pll1_832_gate", "pll1_832", 0, APMU_CLK_GATE_CTRL, 30, 0, &pll1_lock},
+ {PXA1908_CLK_PLL1_1248_GATE, "pll1_1248_gate", "pll1_1248", 0, APMU_CLK_GATE_CTRL, 28, 0, &pll1_lock},
+};
+
+static DEFINE_SPINLOCK(sdh0_lock);
+static DEFINE_SPINLOCK(sdh1_lock);
+static DEFINE_SPINLOCK(sdh2_lock);
+
+static const char * const sdh_parent_names[] = {"pll1_416", "pll1_624"};
+
+static struct mmp_clk_mix_config sdh_mix_config = {
+ .reg_info = DEFINE_MIX_REG_INFO(3, 8, 2, 6, 11),
+};
+
+static struct mmp_param_gate_clk apmu_gate_clks[] = {
+ {PXA1908_CLK_USB, "usb_clk", NULL, 0, APMU_USB, 0x9, 0x9, 0x1, 0, NULL},
+ {PXA1908_CLK_SDH0, "sdh0_clk", "sdh0_mix_clk", CLK_SET_RATE_PARENT | CLK_SET_RATE_UNGATE, APMU_SDH0, 0x12, 0x12, 0x0, 0, &sdh0_lock},
+ {PXA1908_CLK_SDH1, "sdh1_clk", "sdh1_mix_clk", CLK_SET_RATE_PARENT | CLK_SET_RATE_UNGATE, APMU_SDH1, 0x12, 0x12, 0x0, 0, &sdh1_lock},
+ {PXA1908_CLK_SDH2, "sdh2_clk", "sdh2_mix_clk", CLK_SET_RATE_PARENT | CLK_SET_RATE_UNGATE, APMU_SDH2, 0x12, 0x12, 0x0, 0, &sdh2_lock}
+};
+
+static void pxa1908_axi_periph_clk_init(struct pxa1908_clk_unit *pxa_unit)
+{
+ struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+ mmp_register_general_gate_clks(unit, pll1_gate_clks,
+ pxa_unit->base, ARRAY_SIZE(pll1_gate_clks));
+
+ sdh_mix_config.reg_info.reg_clk_ctrl = pxa_unit->base + APMU_SDH0;
+ mmp_clk_register_mix(NULL, "sdh0_mix_clk", sdh_parent_names,
+ ARRAY_SIZE(sdh_parent_names), CLK_SET_RATE_PARENT,
+ &sdh_mix_config, &sdh0_lock);
+ sdh_mix_config.reg_info.reg_clk_ctrl = pxa_unit->base + APMU_SDH1;
+ mmp_clk_register_mix(NULL, "sdh1_mix_clk", sdh_parent_names,
+ ARRAY_SIZE(sdh_parent_names), CLK_SET_RATE_PARENT,
+ &sdh_mix_config, &sdh1_lock);
+ sdh_mix_config.reg_info.reg_clk_ctrl = pxa_unit->base + APMU_SDH2;
+ mmp_clk_register_mix(NULL, "sdh2_mix_clk", sdh_parent_names,
+ ARRAY_SIZE(sdh_parent_names), CLK_SET_RATE_PARENT,
+ &sdh_mix_config, &sdh2_lock);
+
+ mmp_register_gate_clks(unit, apmu_gate_clks, pxa_unit->base,
+ ARRAY_SIZE(apmu_gate_clks));
+}
+
+static int pxa1908_apmu_probe(struct platform_device *pdev)
+{
+ struct pxa1908_clk_unit *pxa_unit;
+
+ pxa_unit = devm_kzalloc(&pdev->dev, sizeof(*pxa_unit), GFP_KERNEL);
+ if (IS_ERR(pxa_unit))
+ return PTR_ERR(pxa_unit);
+
+ pxa_unit->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(pxa_unit->base))
+ return PTR_ERR(pxa_unit->base);
+
+ mmp_clk_init(pdev->dev.of_node, &pxa_unit->unit, APMU_NR_CLKS);
+
+ pxa1908_axi_periph_clk_init(pxa_unit);
+
+ return 0;
+}
+
+static const struct of_device_id pxa1908_apmu_match_table[] = {
+ { .compatible = "marvell,pxa1908-apmu" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, pxa1908_apmu_match_table);
+
+static struct platform_driver pxa1908_apmu_driver = {
+ .probe = pxa1908_apmu_probe,
+ .driver = {
+ .name = "pxa1908-apmu",
+ .of_match_table = pxa1908_apmu_match_table
+ }
+};
+module_platform_driver(pxa1908_apmu_driver);
+
+MODULE_AUTHOR("Duje Mihanović <duje.mihanovic@...le.hr>");
+MODULE_DESCRIPTION("Marvell PXA1908 APMU Clock Driver");
+MODULE_LICENSE("GPL");
--
2.44.0
Powered by blists - more mailing lists