| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <DU0PR04MB94170E1603EFE333B042798288102@DU0PR04MB9417.eurprd04.prod.outlook.com> Date: Wed, 24 Apr 2024 03:11:42 +0000 From: Peng Fan <peng.fan@....com> To: "Peng Fan (OSS)" <peng.fan@....nxp.com>, Jonathan Corbet <corbet@....net>, Shawn Guo <shawnguo@...nel.org>, Sascha Hauer <s.hauer@...gutronix.de>, Pengutronix Kernel Team <kernel@...gutronix.de>, Fabio Estevam <festevam@...il.com>, Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>, Sudeep Holla <sudeep.holla@....com>, Cristian Marussi <cristian.marussi@....com> CC: "linux-doc@...r.kernel.org" <linux-doc@...r.kernel.org>, "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>, "imx@...ts.linux.dev" <imx@...ts.linux.dev>, "linux-arm-kernel@...ts.infradead.org" <linux-arm-kernel@...ts.infradead.org>, "devicetree@...r.kernel.org" <devicetree@...r.kernel.org> Subject: RE: [PATCH v3 1/6] Documentation: firmware-guide: add NXP i.MX95 SCMI documentation Hi Sudeep, > Subject: [PATCH v3 1/6] Documentation: firmware-guide: add NXP i.MX95 > SCMI documentation Does this documentation looks good to you? Thanks, Peng. > > From: Peng Fan <peng.fan@....com> > > Add NXP i.MX95 System Control Management Interface(SCMI) vendor > extensions protocol documentation. > > Signed-off-by: Peng Fan <peng.fan@....com> > --- > Documentation/firmware-guide/index.rst | 10 + > Documentation/firmware-guide/nxp/imx95-scmi.rst | 877 > ++++++++++++++++++++++++ > Documentation/firmware-guide/nxp/index.rst | 10 + > 3 files changed, 897 insertions(+) > > diff --git a/Documentation/firmware-guide/index.rst > b/Documentation/firmware-guide/index.rst > index 5355784ca0a2..8f66ae31337e 100644 > --- a/Documentation/firmware-guide/index.rst > +++ b/Documentation/firmware-guide/index.rst > @@ -4,6 +4,9 @@ > The Linux kernel firmware guide > =============================== > > +ACPI subsystem > +============== > + > This section describes the ACPI subsystem in Linux from firmware perspective. > > .. toctree:: > @@ -11,3 +14,10 @@ This section describes the ACPI subsystem in Linux > from firmware perspective. > > acpi/index > > +NXP firmware > +============ > + > +.. toctree:: > + :maxdepth: 1 > + > + nxp/index > diff --git a/Documentation/firmware-guide/nxp/imx95-scmi.rst > b/Documentation/firmware-guide/nxp/imx95-scmi.rst > new file mode 100644 > index 000000000000..bd87a961e4a5 > --- /dev/null > +++ b/Documentation/firmware-guide/nxp/imx95-scmi.rst > @@ -0,0 +1,877 @@ > +.. SPDX-License-Identifier: GPL-2.0 > +.. include:: <isonum.txt> > + > +================================================================= > ============== > +i.MX95 System Control and Management Interface(SCMI) Vendor Protocols > Extension > +================================================================= > ============== > + > +:Copyright: |copy| 2024 NXP > + > +:Author: Peng Fan <peng.fan@....com> > + > +The System Manager (SM) is a low-level system function which runs on a > System > +Control Processor (SCP) to support isolation and management of power > domains, > +clocks, resets, sensors, pins, etc. on complex application processors. It often > +runs on a Cortex-M processor and provides an abstraction to many of the > +underlying features of the hardware. The primary purpose of the SM is to > allow > +isolation between software running on different cores in the SoC. It does this > +by having exclusive access to critical resources such as those controlling > +power, clocks, reset, PMIC, etc. and then providing an RPC interface to those > +clients. This allows the SM to provide access control, arbitration, and > +aggregation policies for those shared critical resources. > + > +This document covers all the information necessary to understand, maintain, > +port, and deploy the SM on supported processors. > + > +The SM implements an interface compliant with the Arm SCMI 3.2 > Specification > +with vendor specific extensions. > + > +SCMI_BBM: System Control and Management Interface Driver (BBM) > +============================================================== > + > +This protocol is intended provide access to the battery-backed module. This > +contains persistent storage (GPR), an RTC, and the ON/OFF button. The > protocol > +can also provide access to similar functions implemented via external board > +components. The BBM protocol provides functions to: > + > +- Describe the protocol version. > +- Discover implementation attributes. > +- Read/write GPR > +- Discover the RTCs available in the system. > +- Read/write the RTC time in seconds and ticks > +- Set an alarm (per LM) in seconds > +- Get notifications on RTC update, alarm, or rollover. > +- Get notification on ON/OFF button activity. > + > +For most SoC, there is one on-chip RTC (e.g. in BBNSM) and this is RTC ID 0. > +Board code can add additional GPR and RTC. > + > +GPR are not aggregated. The RTC time is also not aggregated. Setting these > +sets for all so normally exclusive access would be granted to one agent for > +each. However, RTC alarms are maintained for each LM and the hardware is > +programmed with the next nearest alarm time. So only one agent in an LM > should > +be given access rights to set an RTC alarm. > + > +Commands: > +_________ > + > +PROTOCOL_VERSION > +~~~~~~~~~~~~~~~~ > + > +message_id: 0x0 > +protocol_id: 0x81 > + > ++---------------+--------------------------------------------------------------+ > +|Return values | > ++---------------+--------------------------------------------------------------+ > +|Name |Description | > ++---------------+--------------------------------------------------------------+ > +|int32 status | See ARM SCMI Specification v3.2 section 4.1.4 for status > | > +| | code definitions. | > ++---------------+--------------------------------------------------------------+ > +|uint32 version | For this revision of the specification, this value must be | > +| | 0x10000. | > ++---------------+--------------------------------------------------------------+ > + > +PROTOCOL_ATTRIBUTES > +~~~~~~~~~~~~~~~~~~~ > + > +message_id: 0x1 > +protocol_id: 0x81 > + > ++---------------+--------------------------------------------------------------+ > +|Return values | > ++------------------+-----------------------------------------------------------+ > +|Name |Description | > ++------------------+-----------------------------------------------------------+ > +|int32 status | See ARM SCMI Specification v3.2 section 4.1.4 for status > | > +| | code definitions. | > ++------------------+-----------------------------------------------------------+ > +|uint32 attributes | Bits[31:8] Number of RTCs. | > +| | Bits[15:0] Number of persistent storage (GPR) words. | > ++------------------+-----------------------------------------------------------+ > + > +PROTOCOL_MESSAGE_ATTRIBUTES > +~~~~~~~~~~~~~~~~~~~~~~~~~~~ > + > +message_id: 0x2 > +protocol_id: 0x81 > + > ++---------------+--------------------------------------------------------------+ > +|Return values | > ++------------------+-----------------------------------------------------------+ > +|Name |Description | > ++------------------+-----------------------------------------------------------+ > +|int32 status |SUCCESS: in case the message is implemented and > available | > +| |to use. | > +| |NOT_FOUND: if the message identified by message_id is | > +| |invalid or not implemented | > ++------------------+-----------------------------------------------------------+ > +|uint32 attributes |Flags that are associated with a specific function in the | > +| |protocol. For all functions in this protocol, this | > +| |parameter has a value of 0 | > ++------------------+-----------------------------------------------------------+ > + > +BBM_GPR_SET > +~~~~~~~~~~~ > + > +message_id: 0x3 > +protocol_id: 0x81 > + > ++------------------+-----------------------------------------------------------+ > +|Parameters | > ++------------------+-----------------------------------------------------------+ > +|Name |Description | > ++------------------+-----------------------------------------------------------+ > +|uint32 index |Index of GPR to write | > ++------------------+-----------------------------------------------------------+ > +|uint32 value |32-bit value to write to the GPR | > ++------------------+-----------------------------------------------------------+ > +|Return values | > ++------------------+-----------------------------------------------------------+ > +|Name |Description | > ++------------------+-----------------------------------------------------------+ > +|int32 status |SUCCESS: if the GPR was successfully written. | > +| |NOT_FOUND: if the index is not valid. | > +| |DENIED: if the agent does not have permission to write | > +| |the specified GPR | > ++------------------+-----------------------------------------------------------+ > + > +BBM_GPR_GET > +~~~~~~~~~~~ > + > +message_id: 0x4 > +protocol_id: 0x81 > + > ++------------------+-----------------------------------------------------------+ > +|Parameters | > ++------------------+-----------------------------------------------------------+ > +|Name |Description | > ++------------------+-----------------------------------------------------------+ > +|uint32 index |Index of GPR to read | > ++------------------+-----------------------------------------------------------+ > +|Return values | > ++------------------+-----------------------------------------------------------+ > +|Name |Description | > ++------------------+-----------------------------------------------------------+ > +|int32 status |SUCCESS: if the GPR was successfully written. | > +| |NOT_FOUND: if the index is not valid. | > +| |DENIED: if the agent does not have permission to write | > +| |the specified GPR. | > ++------------------+-----------------------------------------------------------+ > +|uint32 value |32-bit value read from the GPR | > ++------------------+-----------------------------------------------------------+ > + > +BBM_RTC_ATTRIBUTES > +~~~~~~~~~~~~~~~~~~ > + > +message_id: 0x5 > +protocol_id: 0x81 > + > ++------------------+-----------------------------------------------------------+ > +|Parameters | > ++------------------+-----------------------------------------------------------+ > +|Name |Description | > ++------------------+-----------------------------------------------------------+ > +|uint32 index |Index of RTC | > ++------------------+-----------------------------------------------------------+ > +|Return values | > ++------------------+-----------------------------------------------------------+ > +|Name |Description | > ++------------------+-----------------------------------------------------------+ > +|int32 status |SUCCESS: returned the attributes. | > +| |NOT_FOUND: Index is invalid. | > ++------------------+-----------------------------------------------------------+ > +|uint32 attributes |Bit[31:24] Bit width of RTC seconds. | > +| |Bit[23:16] Bit width of RTC ticks. | > +| |Bits[15:0] RTC ticks per second | > ++------------------+-----------------------------------------------------------+ > +|uint8 name[16] |Null-terminated ASCII string of up to 16 bytes in length > | > +| |describing the RTC name | > ++------------------+-----------------------------------------------------------+ > + > +BBM_RTC_TIME_SET > +~~~~~~~~~~~~~~~~ > + > +message_id: 0x6 > +protocol_id: 0x81 > + > ++------------------+-----------------------------------------------------------+ > +|Parameters | > ++------------------+-----------------------------------------------------------+ > +|Name |Description | > ++------------------+-----------------------------------------------------------+ > +|uint32 index |Index of RTC | > ++------------------+-----------------------------------------------------------+ > +|uint32 flags |Bits[31:1] Reserved, must be zero. | > +| |Bit[0] RTC time format: | > +| |Set to 1 if the time is in ticks. | > +| |Set to 0 if the time is in seconds | > ++------------------+-----------------------------------------------------------+ > +|uint32 time[2] |Lower word: Lower 32 bits of the time in seconds/ticks. > | > +| |Upper word: Upper 32 bits of the time in seconds/ticks. | > ++------------------+-----------------------------------------------------------+ > +|Return values | > ++------------------+-----------------------------------------------------------+ > +|Name |Description | > ++------------------+-----------------------------------------------------------+ > +|int32 status |SUCCESS: RTC time was successfully set. | > +| |NOT_FOUND: rtcId pertains to a non-existent RTC. | > +| |INVALID_PARAMETERS: time is not valid | > +| |(beyond the range of the RTC). | > +| |DENIED: the agent does not have permission to set the RTC. | > ++------------------+-----------------------------------------------------------+ > + > +BBM_RTC_TIME_GET > +~~~~~~~~~~~~~~~~ > + > +message_id: 0x7 > +protocol_id: 0x81 > + > ++------------------+-----------------------------------------------------------+ > +|Parameters | > ++------------------+-----------------------------------------------------------+ > +|Name |Description | > ++------------------+-----------------------------------------------------------+ > +|uint32 index |Index of RTC | > ++------------------+-----------------------------------------------------------+ > +|uint32 flags |Bits[31:1] Reserved, must be zero. | > +| |Bit[0] RTC time format: | > +| |Set to 1 if the time is in ticks. | > +| |Set to 0 if the time is in seconds | > ++------------------+-----------------------------------------------------------+ > +|Return values | > ++------------------+-----------------------------------------------------------+ > +|Name |Description | > ++------------------+-----------------------------------------------------------+ > +|int32 status |SUCCESS: RTC time was successfully set. | > +| |NOT_FOUND: rtcId pertains to a non-existent RTC. | > ++------------------+-----------------------------------------------------------+ > +|uint32 time[2] |Lower word: Lower 32 bits of the time in seconds/ticks. > | > +| |Upper word: Upper 32 bits of the time in seconds/ticks. | > ++------------------+-----------------------------------------------------------+ > + > +BBM_RTC_ALARM_SET > +~~~~~~~~~~~~~~~~~ > + > +message_id: 0x8 > +protocol_id: 0x81 > + > ++------------------+-----------------------------------------------------------+ > +|Parameters | > ++------------------+-----------------------------------------------------------+ > +|Name |Description | > ++------------------+-----------------------------------------------------------+ > +|uint32 index |Index of RTC | > ++------------------+-----------------------------------------------------------+ > +|uint32 flags |Bits[31:1] Reserved, must be zero. | > +| |Bit[0] RTC enable flag: | > +| |Set to 1 if the RTC alarm should be enabled. | > +| |Set to 0 if the RTC alarm should be disabled | > ++------------------+-----------------------------------------------------------+ > +|uint32 time[2] |Lower word: Lower 32 bits of the time in seconds. | > +| |Upper word: Upper 32 bits of the time in seconds. | > ++------------------+-----------------------------------------------------------+ > +|Return values | > ++------------------+-----------------------------------------------------------+ > +|Name |Description | > ++------------------+-----------------------------------------------------------+ > +|int32 status |SUCCESS: RTC time was successfully set. | > +| |NOT_FOUND: rtcId pertains to a non-existent RTC. | > +| |INVALID_PARAMETERS: time is not valid | > +| |(beyond the range of the RTC). | > +| |DENIED: the agent does not have permission to set the RTC | > +| |alarm | > ++------------------+-----------------------------------------------------------+ > + > +BBM_BUTTON_GET > +~~~~~~~~~~~~~~ > + > +message_id: 0x9 > +protocol_id: 0x81 > + > ++------------------+-----------------------------------------------------------+ > +|Return values | > ++------------------+-----------------------------------------------------------+ > +|Name |Description | > ++------------------+-----------------------------------------------------------+ > +|int32 status |SUCCESS: if the button status was read. | > +| |Other value: ARM SCMI Specification v3.2 section 4.1.4. | > ++------------------+-----------------------------------------------------------+ > +|uint32 state |State of the ON/OFF button | > ++------------------+-----------------------------------------------------------+ > + > +BBM_RTC_NOTIFY > +~~~~~~~~~~~~~~ > + > +message_id: 0xA > +protocol_id: 0x81 > + > ++------------------+-----------------------------------------------------------+ > +|Parameters | > ++------------------+-----------------------------------------------------------+ > +|Name |Description | > ++------------------+-----------------------------------------------------------+ > +|uint32 index |Index of RTC | > ++------------------+-----------------------------------------------------------+ > +|uint32 flags |Notification flags | > +| |Bits[31:3] Reserved, must be zero. | > +| |Bit[2] Update enable: | > +| |Set to 1 to send notification. | > +| |Set to 0 if no notification. | > +| |Bit[1] Rollover enable: | > +| |Set to 1 to send notification. | > +| |Set to 0 if no notification. | > +| |Bit[0] Alarm enable: | > +| |Set to 1 to send notification. | > +| |Set to 0 if no notification | > ++------------------+-----------------------------------------------------------+ > +|Return values | > ++------------------+-----------------------------------------------------------+ > +|Name |Description | > ++------------------+-----------------------------------------------------------+ > +|int32 status |SUCCESS: notification configuration was successfully | > +| |updated. | > +| |NOT_FOUND: rtcId pertains to a non-existent RTC. | > +| |DENIED: the agent does not have permission to request RTC | > +| |notifications. | > ++------------------+-----------------------------------------------------------+ > + > +BBM_BUTTON_NOTIFY > +~~~~~~~~~~~~~~~~~ > + > +message_id: 0xB > +protocol_id: 0x81 > + > ++------------------+-----------------------------------------------------------+ > +|Parameters | > ++------------------+-----------------------------------------------------------+ > +|Name |Description | > ++------------------+-----------------------------------------------------------+ > +|uint32 flags |Notification flags | > +| |Bits[31:1] Reserved, must be zero. | > +| |Bit[0] Enable button: | > +| |Set to 1 to send notification. | > +| |Set to 0 if no notification | > ++------------------+-----------------------------------------------------------+ > +|Return values | > ++------------------+-----------------------------------------------------------+ > +|Name |Description | > ++------------------+-----------------------------------------------------------+ > +|int32 status |SUCCESS: notification configuration was successfully | > +| |updated. | > +| |DENIED: the agent does not have permission to request | > +| |button notifications. | > ++------------------+-----------------------------------------------------------+ > + > +NEGOTIATE_PROTOCOL_VERSION > +~~~~~~~~~~~~~~~~~~~~~~~~~~ > + > +message_id: 0x10 > +protocol_id: 0x81 > + > ++--------------------+---------------------------------------------------------+ > +|Parameters | > ++--------------------+---------------------------------------------------------+ > +|Name |Description | > ++--------------------+---------------------------------------------------------+ > +|uint32 version |The negotiated protocol version the agent intends to > use | > ++--------------------+---------------------------------------------------------+ > +|Return values | > ++--------------------+---------------------------------------------------------+ > +|Name |Description | > ++--------------------+---------------------------------------------------------+ > +|int32 status |SUCCESS: if the negotiated protocol version is supported > | > +| |by the platform. All commands, responses, and | > +| |notifications post successful return of this command must| > +| |comply with the negotiated version. | > +| |NOT_SUPPORTED: if the protocol version is not supported. | > ++--------------------+---------------------------------------------------------+ > + > +Notifications > +_____________ > + > +BBM_RTC_EVENT > +~~~~~~~~~~~~~ > + > +message_id: 0x0 > +protocol_id: 0x81 > + > ++------------------+-----------------------------------------------------------+ > +|Parameters | > ++------------------+-----------------------------------------------------------+ > +|Name |Description | > ++------------------+-----------------------------------------------------------+ > +|uint32 flags |RTC events: | > +| |Bits[31:2] Reserved, must be zero. | > +| |Bit[1] RTC rollover notification: | > +| |1 RTC rollover detected. | > +| |0 no RTC rollover detected. | > +| |Bit[0] RTC alarm notification: | > +| |1 RTC alarm generated. | > +| |0 no RTC alarm generated. | > ++------------------+-----------------------------------------------------------+ > + > +BBM_BUTTON_EVENT > +~~~~~~~~~~~~~~~~ > + > +message_id: 0x1 > +protocol_id: 0x81 > + > ++------------------+-----------------------------------------------------------+ > +|Parameters | > ++------------------+-----------------------------------------------------------+ > +|Name |Description | > ++------------------+-----------------------------------------------------------+ > +|uint32 flags |RTC events: | > ++------------------+-----------------------------------------------------------+ > +| |Button events: | > +| |Bits[31:1] Reserved, must be zero. | > +| |Bit[0] Button notification: | > +| |1 button change detected. | > +| |0 no button change detected. | > ++------------------+-----------------------------------------------------------+ > + > +SCMI_MISC: System Control and Management Interface Driver (MISC) > +================================================================ > + > +Provides misc. functions. This includes controls that are misc. > settings/actions > +that must be exposed from the SM to agents. They are device specific and > are > +usually define to access bit fields in various mix block control modules, > +IOMUX_GPR, and other GPR/CSR owned by the SM. This protocol supports > the > +following functions: > + > +- Describe the protocol version. > +- Discover implementation attributes. > +- Set/Get a control. > +- Initiate an action on a control. > +- Obtain platform (i.e. SM) build information. > +- Obtain ROM passover data. > +- Read boot/shutdown/reset information for the LM or the system. > + > +Commands: > +_________ > + > +PROTOCOL_VERSION > +~~~~~~~~~~~~~~~~ > + > +message_id: 0x0 > +protocol_id: 0x84 > + > ++---------------+--------------------------------------------------------------+ > +|Return values | > ++---------------+--------------------------------------------------------------+ > +|Name |Description | > ++---------------+--------------------------------------------------------------+ > +|int32 status | See ARM SCMI Specification v3.2 section 4.1.4 for status > | > +| | code definitions. | > ++---------------+--------------------------------------------------------------+ > +|uint32 version | For this revision of the specification, this value must be | > +| | 0x10000. | > ++---------------+--------------------------------------------------------------+ > + > +PROTOCOL_ATTRIBUTES > +~~~~~~~~~~~~~~~~~~~ > + > +message_id: 0x1 > +protocol_id: 0x84 > + > ++------------------+-----------------------------------------------------------+ > +|Return values | > ++------------------+-----------------------------------------------------------+ > +|Name |Description | > ++------------------+-----------------------------------------------------------+ > +|int32 status |See ARM SCMI Specification v3.2 section 4.1.4 for status > | > +| |code definitions. | > ++------------------+-----------------------------------------------------------+ > +|uint32 attributes |Protocol attributes: | > +| |Bits[31:24] Reserved, must be zero. | > +| |Bits[23:16] Number of reasons. | > +| |Bits[15:0] Number of controls | > ++------------------+-----------------------------------------------------------+ > + > +PROTOCOL_MESSAGE_ATTRIBUTES > +~~~~~~~~~~~~~~~~~~~~~~~~~~~ > + > +message_id: 0x2 > +protocol_id: 0x84 > + > ++------------------+-----------------------------------------------------------+ > +|Return values | > ++------------------+-----------------------------------------------------------+ > +|Name |Description | > ++------------------+-----------------------------------------------------------+ > +|int32 status |SUCCESS: in case the message is implemented and > available | > +| |to use. | > +| |NOT_FOUND: if the message identified by message_id is | > +| |invalid or not implemented | > ++------------------+-----------------------------------------------------------+ > +|uint32 attributes |Flags that are associated with a specific function in the | > +| |protocol. For all functions in this protocol, this | > +| |parameter has a value of 0 | > ++------------------+-----------------------------------------------------------+ > + > +MISC_CONTROL_SET > +~~~~~~~~~~~~~~~~ > + > +message_id: 0x3 > +protocol_id: 0x84 > + > ++------------------+-----------------------------------------------------------+ > +|Parameters | > ++------------------+-----------------------------------------------------------+ > +|Name |Description | > ++------------------+-----------------------------------------------------------+ > +|uint32 index |Index of the control | > ++------------------+-----------------------------------------------------------+ > +|uint32 num |Size of the value data in words | > ++------------------+-----------------------------------------------------------+ > +|uint32 val[8] |value data array | > ++------------------+-----------------------------------------------------------+ > +|Return values | > ++------------------+-----------------------------------------------------------+ > +|Name |Description | > ++------------------+-----------------------------------------------------------+ > +|int32 status |SUCCESS: if the control was set successfully. | > +| |NOT_FOUND: if the index is not valid. | > +| |DENIED: if the agent does not have permission to set the | > +| |control | > ++------------------+-----------------------------------------------------------+ > + > +MISC_CONTROL_GET > +~~~~~~~~~~~~~~~~ > + > +message_id: 0x4 > +protocol_id: 0x84 > + > ++------------------+-----------------------------------------------------------+ > +|Parameters | > ++------------------+-----------------------------------------------------------+ > +|Name |Description | > ++------------------+-----------------------------------------------------------+ > +|uint32 index |Index of the control | > ++------------------+-----------------------------------------------------------+ > +|Return values | > ++------------------+-----------------------------------------------------------+ > +|Name |Description | > ++------------------+-----------------------------------------------------------+ > +|int32 status |SUCCESS: if the control was set successfully. | > +| |NOT_FOUND: if the index is not valid. | > +| |DENIED: if the agent does not have permission to get the | > +| |control | > ++------------------+-----------------------------------------------------------+ > +|uint32 num |Size of the return data in words | > ++------------------+-----------------------------------------------------------+ > +|uint32 val[8] |value data array | > ++------------------+-----------------------------------------------------------+ > + > +MISC_CONTROL_ACTION > +~~~~~~~~~~~~~~~~~~~ > + > +message_id: 0x5 > +protocol_id: 0x84 > + > ++------------------+-----------------------------------------------------------+ > +|Parameters | > ++------------------+-----------------------------------------------------------+ > +|Name |Description | > ++------------------+-----------------------------------------------------------+ > +|uint32 index |Index of the control | > ++------------------+-----------------------------------------------------------+ > +|uint32 action |Action for the control | > ++------------------+-----------------------------------------------------------+ > +|uint32 numarg |Size of the argument data | > ++------------------+-----------------------------------------------------------+ > +|uint32 arg[8] |Argument data array | > ++------------------+-----------------------------------------------------------+ > +|Return values | > ++------------------+-----------------------------------------------------------+ > +|Name |Description | > ++------------------+-----------------------------------------------------------+ > +|int32 status |SUCCESS: if the action was set successfully. | > +| |NOT_FOUND: if the index is not valid. | > +| |DENIED: if the agent does not have permission to get the | > +| |control | > ++------------------+-----------------------------------------------------------+ > +|uint32 num |Size of the return data in words | > ++------------------+-----------------------------------------------------------+ > +|uint32 val[8] |value data array | > ++------------------+-----------------------------------------------------------+ > + > +MISC_DISCOVER_BUILD_INFO > +~~~~~~~~~~~~~~~~~~~~~~~~ > + > +message_id: 0x6 > +protocol_id: 0x84 > + > ++------------------+-----------------------------------------------------------+ > +|Return values | > ++------------------+-----------------------------------------------------------+ > +|Name |Description | > ++------------------+-----------------------------------------------------------+ > +|int32 status |SUCCESS: if the build info was got successfully. | > +| |NOT_SUPPORTED: if the data is not available. | > ++------------------+-----------------------------------------------------------+ > +|uint32 buildnum |Build number | > ++------------------+-----------------------------------------------------------+ > +|uint32 buildcommit|Most significant 32 bits of the git commit hash > | > ++------------------+-----------------------------------------------------------+ > +|uint8 date[16] |Date of build. Null terminated ASCII string of up to 16 | > +| |bytes in length | > ++------------------+-----------------------------------------------------------+ > +|uint8 time[16] |Time of build. Null terminated ASCII string of up to 16 | > +| |bytes in length | > ++------------------+-----------------------------------------------------------+ > + > +MISC_ROM_PASSOVER_GET > +~~~~~~~~~~~~~~~~~~~~~ > + > +This function is used to obtain the ROM passover data. The returned block of > +words is structured as defined in the ROM passover section in the SoC RM. > + > +message_id: 0x7 > +protocol_id: 0x84 > + > ++------------------+-----------------------------------------------------------+ > +|Return values | > ++------------------+-----------------------------------------------------------+ > +|Name |Description | > ++------------------+-----------------------------------------------------------+ > +|int32 status |SUCCESS: if the data was got successfully. | > +| |NOT_SUPPORTED: if the data is not available. | > ++------------------+-----------------------------------------------------------+ > +|uint32 num |Size of the passover data in words | > ++------------------+-----------------------------------------------------------+ > +|uint32_t data[8] |Passover data array | > ++------------------+-----------------------------------------------------------+ > + > +MISC_CONTROL_NOTIFY > +~~~~~~~~~~~~~~~~~~~ > + > +message_id: 0x8 > +protocol_id: 0x84 > + > ++------------------+-----------------------------------------------------------+ > +|Parameters | > ++------------------+-----------------------------------------------------------+ > +|Name |Description | > ++------------------+-----------------------------------------------------------+ > +|uint32 index |Index of control | > ++------------------+-----------------------------------------------------------+ > +|uint32 flags |Notification flags, varies by control | > ++------------------+-----------------------------------------------------------+ > +|Return values | > ++------------------+-----------------------------------------------------------+ > +|Name |Description | > ++------------------+-----------------------------------------------------------+ > +|int32 status |SUCCESS: notification configuration was successfully | > +| |updated. | > +| |NOT_FOUND: control id not exists. | > +| |INVALID_PARAMETERS: if the input attributes flag specifies | > +| |unsupported or invalid configurations.. | > +| |DENIED: if the calling agent is not permitted to request | > +| |the notification. | > ++------------------+-----------------------------------------------------------+ > + > +MISC_REASON_ATTRIBUTES > +~~~~~~~~~~~~~~~~~~~~~~ > + > +message_id: 0x9 > +protocol_id: 0x84 > + > ++------------------+-----------------------------------------------------------+ > +|Parameters | > ++------------------+-----------------------------------------------------------+ > +|Name |Description | > ++------------------+-----------------------------------------------------------+ > +|uint32 reasonid |Identifier for the reason | > ++------------------+-----------------------------------------------------------+ > +|Return values | > ++------------------+-----------------------------------------------------------+ > +|Name |Description | > ++------------------+-----------------------------------------------------------+ > +|int32 status |SUCCESS: if valid reason attributes are returned | > +| |NOT_FOUND: if reasonId pertains to a non-existent reason. | > ++------------------+-----------------------------------------------------------+ > +|uint32 attributes |Reason attributes. This parameter has the following > | > +| |format: Bits[31:0] Reserved, must be zero | > +| |Bits[15:0] Number of persistent storage (GPR) words. | > ++------------------+-----------------------------------------------------------+ > +|uint8 name[16] |Null-terminated ASCII string of up to 16 bytes in length > | > +| |describing the reason | > ++------------------+-----------------------------------------------------------+ > + > +MISC_RESET_REASON > +~~~~~~~~~~~~~~~~~ > + > +message_id: 0xA > +protocol_id: 0x84 > + > ++--------------------+---------------------------------------------------------+ > +|Parameters | > ++--------------------+---------------------------------------------------------+ > +|Name |Description | > ++--------------------+---------------------------------------------------------+ > +|uint32 flags |Reason flags. This parameter has the following format: | > +| |Bits[31:1] Reserved, must be zero. | > +| |Bit[0] System: | > +| |Set to 1 to return the system reason. | > +| |Set to 0 to return the LM reason | > ++--------------------+---------------------------------------------------------+ > +|Return values | > ++--------------------+---------------------------------------------------------+ > +|Name |Description | > ++--------------------+---------------------------------------------------------+ > +|int32 status |SUCCESS: reset reason return | > ++--------------------+---------------------------------------------------------+ > +|uint32 bootflags |Boot reason flags. This parameter has the format: | > +| |Bits[31] Valid. | > +| |Set to 1 if the entire reason is valid. | > +| |Set to 0 if the entire reason is not valid. | > +| |Bits[30:29] Reserved, must be zero. | > +| |Bit[28] Valid origin: | > +| |Set to 1 if the origin field is valid. | > +| |Set to 0 if the origin field is not valid. | > +| |Bits[27:24] Origin. | > +| |Bit[23] Valid err ID: | > +| |Set to 1 if the error ID field is valid. | > +| |Set to 0 if the error ID field is not valid. | > +| |Bits[22:8] Error ID. | > +| |Bit[7:0] Reason | > ++--------------------+---------------------------------------------------------+ > +|uint32 shutdownflags|Shutdown reason flags. This parameter has the > format: | > +| |Bits[31] Valid. | > +| |Set to 1 if the entire reason is valid. | > +| |Set to 0 if the entire reason is not valid. | > +| |Bits[30:29] Number of valid extended info words. | > +| |Bit[28] Valid origin: | > +| |Set to 1 if the origin field is valid. | > +| |Set to 0 if the origin field is not valid. | > +| |Bits[27:24] Origin. | > +| |Bit[23] Valid err ID: | > +| |Set to 1 if the error ID field is valid. | > +| |Set to 0 if the error ID field is not valid. | > +| |Bits[22:8] Error ID. | > +| |Bit[7:0] Reason | > ++--------------------+---------------------------------------------------------+ > +|uint32 extinfo[8] |Array of extended info words | > ++--------------------+---------------------------------------------------------+ > + > +MISC_SI_INFO > +~~~~~~~~~~~~ > + > +message_id: 0xB > +protocol_id: 0x84 > + > ++--------------------+---------------------------------------------------------+ > +|Return values | > ++--------------------+---------------------------------------------------------+ > +|Name |Description | > ++--------------------+---------------------------------------------------------+ > +|int32 status |SUCCESS: silicon info return | > ++--------------------+---------------------------------------------------------+ > +|uint32 deviceid |Silicon specific device ID | > ++--------------------+---------------------------------------------------------+ > +|uint32 sirev |Silicon specific revision | > ++--------------------+---------------------------------------------------------+ > +|uint32 partnum |Silicon specific part number | > ++--------------------+---------------------------------------------------------+ > +|uint8 siname[16] |Silicon name/revision. Null terminated ASCII string of > up| > +| |to 16 bytes in length | > ++--------------------+---------------------------------------------------------+ > + > +MISC_CFG_INFO > +~~~~~~~~~~~~~ > + > +message_id: 0xC > +protocol_id: 0x84 > + > ++--------------------+---------------------------------------------------------+ > +|Return values | > ++--------------------+---------------------------------------------------------+ > +|Name |Description | > ++--------------------+---------------------------------------------------------+ > +|int32 status |SUCCESS: config name return | > +| |NOT_SUPPORTED: name not available | > ++--------------------+---------------------------------------------------------+ > +|uint32 msel |Mode selector value | > ++--------------------+---------------------------------------------------------+ > +|uint8 cfgname[16] |config file basename. Null terminated ASCII string of > up | > +| |to 16 bytes in length | > ++--------------------+---------------------------------------------------------+ > + > +MISC_SYSLOG > +~~~~~~~~~~~ > + > +message_id: 0xD > +protocol_id: 0x84 > + > ++--------------------+---------------------------------------------------------+ > +|Parameters | > ++--------------------+---------------------------------------------------------+ > +|Name |Description | > ++--------------------+---------------------------------------------------------+ > +|uint32 flags |Device specific flags that might impact the data returned| > +| |or clearing of the data | > ++--------------------+---------------------------------------------------------+ > +|uint32 logindex |Index to the first log word. Will be the first element in| > +| |the return array | > ++--------------------+---------------------------------------------------------+ > +|Return values | > ++--------------------+---------------------------------------------------------+ > +|Name |Description | > ++--------------------+---------------------------------------------------------+ > +|int32 status |SUCCESS: reset reason return | > ++--------------------+---------------------------------------------------------+ > +|uint32 numLogflags |Descriptor for the log data returned by this call. | > +| |Bits[31:20] Number of remaining log words. | > +| |Bits[15:12] Reserved, must be zero. | > +| |Bits[11:0] Number of log words that are returned by this | > +| |call | > ++--------------------+---------------------------------------------------------+ > +|uint32 syslog[16] |Log data array | > ++--------------------+---------------------------------------------------------+ > + > +NEGOTIATE_PROTOCOL_VERSION > +~~~~~~~~~~~~~~~~~~~~~~~~~~ > + > +message_id: 0x10 > +protocol_id: 0x84 > + > ++--------------------+---------------------------------------------------------+ > +|Parameters | > ++--------------------+---------------------------------------------------------+ > +|Name |Description | > ++--------------------+---------------------------------------------------------+ > +|uint32 version |The negotiated protocol version the agent intends to > use | > ++--------------------+---------------------------------------------------------+ > +|Return values | > ++--------------------+---------------------------------------------------------+ > +|Name |Description | > ++--------------------+---------------------------------------------------------+ > +|int32 status |SUCCESS: if the negotiated protocol version is supported > | > +| |by the platform. All commands, responses, and | > +| |notifications post successful return of this command must| > +| |comply with the negotiated version. | > +| |NOT_SUPPORTED: if the protocol version is not supported. | > ++--------------------+---------------------------------------------------------+ > + > +Notifications > +_____________ > + > +MISC_CONTROL_EVENT > +~~~~~~~~~~~~~~~~~~ > + > +message_id: 0x0 > +protocol_id: 0x81 > + > ++------------------+-----------------------------------------------------------+ > +|Parameters | > ++------------------+-----------------------------------------------------------+ > +|Name |Description | > ++------------------+-----------------------------------------------------------+ > +|uint32 ctrlid |Identifier for the control that caused the event. | > ++------------------+-----------------------------------------------------------+ > +|uint32 flags |Event flags, varies by control. | > ++------------------+-----------------------------------------------------------+ > + > diff --git a/Documentation/firmware-guide/nxp/index.rst > b/Documentation/firmware-guide/nxp/index.rst > new file mode 100644 > index 000000000000..b38c980a50c6 > --- /dev/null > +++ b/Documentation/firmware-guide/nxp/index.rst > @@ -0,0 +1,10 @@ > +.. SPDX-License-Identifier: GPL-2.0 > + > +==================== > +NXP Firmware Support > +==================== > + > +.. toctree:: > + :maxdepth: 1 > + > + imx95-scmi > > -- > 2.37.1
Powered by blists - more mailing lists