| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <691cfcb7-eced-b675-8353-7a53dc3c3698@easystack.cn>
Date: Wed, 24 Apr 2024 16:36:36 +0800
From: Dongsheng Yang <dongsheng.yang@...ystack.cn>
To: Chaitanya Kulkarni <chaitanyak@...dia.com>,
"dan.j.williams@...el.com" <dan.j.williams@...el.com>,
"axboe@...nel.dk" <axboe@...nel.dk>
Cc: "linux-block@...r.kernel.org" <linux-block@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-cxl@...r.kernel.org" <linux-cxl@...r.kernel.org>,
Dongsheng Yang <dongsheng.yang.linux@...il.com>
Subject: Re: [PATCH 1/7] block: Init for CBD(CXL Block Device)
在 2024/4/24 星期三 上午 11:58, Chaitanya Kulkarni 写道:
>> +/*
>> + * As shared memory is supported in CXL3.0 spec, we can transfer data via CXL shared memory.
>> + * CBD means CXL block device, it use CXL shared memory to transport command and data to
>> + * access block device in different host, as shown below:
>> + *
>> + * ┌───────────────────────────────┐ ┌────────────────────────────────────┐
>> + * │ node-1 │ │ node-2 │
>> + * ├───────────────────────────────┤ ├────────────────────────────────────┤
>> + * │ │ │ │
>> + * │ ┌───────┤ ├─────────┐ │
>> + * │ │ cbd0 │ │ backend0├──────────────────┐ │
>> + * │ ├───────┤ ├─────────┤ │ │
>> + * │ │ pmem0 │ │ pmem0 │ ▼ │
>> + * │ ┌───────┴───────┤ ├─────────┴────┐ ┌───────────────┤
>> + * │ │ cxl driver │ │ cxl driver │ │ /dev/sda │
>> + * └───────────────┴────────┬──────┘ └─────┬────────┴─────┴───────────────┘
>> + * │ │
>> + * │ │
>> + * │ CXL CXL │
>> + * └────────────────┐ ┌───────────┘
>> + * │ │
>> + * │ │
>> + * │ │
>> + * ┌───┴───────────────┴─────┐
>> + * │ shared memory device │
>> + * └─────────────────────────┘
>> + *
>> + * any read/write to cbd0 on node-1 will be transferred to node-2 /dev/sda. It works similar with
>> + * nbd (network block device), but it transfer data via CXL shared memory rather than network.
>> + */
>> +
>> +/* printk */
>
> I don't think you need above comment ..
Agreed
>
>> +#define cbd_err(fmt, ...) \
>> + pr_err("cbd: %s:%u " fmt, __func__, __LINE__, ##__VA_ARGS__)
>
> you can use #define pr_fmt and remove cmd: prefixes in each pr_xxx above ?
pr_fmt was one of my choice, however, it cannot fulfill all my
requirements, such as adding other prefixes like "transport%u," etc. So,
in the end, I didn't use pr_fmt, also to maintain consistency with other
macros.
>
>> +#define cbd_info(fmt, ...) \
>> + pr_info("cbd: %s:%u " fmt, __func__, __LINE__, ##__VA_ARGS__)
>> +#define cbd_debug(fmt, ...) \
>> + pr_debug("cbd: %s:%u " fmt, __func__, __LINE__, ##__VA_ARGS__)
>> +
>> +#define cbdt_err(transport, fmt, ...) \
>> + cbd_err("cbd_transport%u: " fmt, \
>> + transport->id, ##__VA_ARGS__)
>> +#define cbdt_info(transport, fmt, ...) \
>> + cbd_info("cbd_transport%u: " fmt, \
>> + transport->id, ##__VA_ARGS__)
>> +#define cbdt_debug(transport, fmt, ...) \
>> + cbd_debug("cbd_transport%u: " fmt, \
>> + transport->id, ##__VA_ARGS__)
>> +
>> +#define cbd_backend_err(backend, fmt, ...) \
>> + cbdt_err(backend->cbdt, "backend%d: " fmt, \
>> + backend->backend_id, ##__VA_ARGS__)
>> +#define cbd_backend_info(backend, fmt, ...) \
>> + cbdt_info(backend->cbdt, "backend%d: " fmt, \
>> + backend->backend_id, ##__VA_ARGS__)
>> +#define cbd_backend_debug(backend, fmt, ...) \
>> + cbdt_debug(backend->cbdt, "backend%d: " fmt, \
>> + backend->backend_id, ##__VA_ARGS__)
>> +
>> +#define cbd_handler_err(handler, fmt, ...) \
>> + cbd_backend_err(handler->cbdb, "handler%d: " fmt, \
>> + handler->channel.channel_id, ##__VA_ARGS__)
>> +#define cbd_handler_info(handler, fmt, ...) \
>> + cbd_backend_info(handler->cbdb, "handler%d: " fmt, \
>> + handler->channel.channel_id, ##__VA_ARGS__)
>> +#define cbd_handler_debug(handler, fmt, ...) \
>> + cbd_backend_debug(handler->cbdb, "handler%d: " fmt, \
>> + handler->channel.channel_id, ##__VA_ARGS__)
>> +
>> +#define cbd_blk_err(dev, fmt, ...) \
>> + cbdt_err(dev->cbdt, "cbd%d: " fmt, \
>> + dev->mapped_id, ##__VA_ARGS__)
>> +#define cbd_blk_info(dev, fmt, ...) \
>> + cbdt_info(dev->cbdt, "cbd%d: " fmt, \
>> + dev->mapped_id, ##__VA_ARGS__)
>> +#define cbd_blk_debug(dev, fmt, ...) \
>> + cbdt_debug(dev->cbdt, "cbd%d: " fmt, \
>> + dev->mapped_id, ##__VA_ARGS__)
>> +
>> +#define cbd_queue_err(queue, fmt, ...) \
>> + cbd_blk_err(queue->cbd_blkdev, "queue-%d: " fmt, \
>> + queue->index, ##__VA_ARGS__)
>> +#define cbd_queue_info(queue, fmt, ...) \
>> + cbd_blk_info(queue->cbd_blkdev, "queue-%d: " fmt, \
>> + queue->index, ##__VA_ARGS__)
>> +#define cbd_queue_debug(queue, fmt, ...) \
>> + cbd_blk_debug(queue->cbd_blkdev, "queue-%d: " fmt, \
>> + queue->index, ##__VA_ARGS__)
>> +
>> +#define cbd_channel_err(channel, fmt, ...) \
>> + cbdt_err(channel->cbdt, "channel%d: " fmt, \
>> + channel->channel_id, ##__VA_ARGS__)
>> +#define cbd_channel_info(channel, fmt, ...) \
>> + cbdt_info(channel->cbdt, "channel%d: " fmt, \
>> + channel->channel_id, ##__VA_ARGS__)
>> +#define cbd_channel_debug(channel, fmt, ...) \
>> + cbdt_debug(channel->cbdt, "channel%d: " fmt, \
>> + channel->channel_id, ##__VA_ARGS__)
>> +
>
> [...]
>
>> +
>> +struct cbd_se {
>> + struct cbd_se_hdr header;
>> + u64 priv_data; // pointer to cbd_request
>
> use /**/ instead //
agreed
Thanx
>
>
> -ck
>
>
Powered by blists - more mailing lists