lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240424083607.11162-4-fabio.aiuto@engicam.com>
Date: Wed, 24 Apr 2024 10:36:07 +0200
From: Fabio Aiuto <fabio.aiuto@...icam.com>
To: Shawn Guo <shawnguo@...nel.org>,
	Sascha Hauer <s.hauer@...gutronix.de>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
	Rob Herring <robh@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>
Cc: devicetree@...r.kernel.org,
	imx@...ts.linux.dev,
	linux-arm-kernel@...ts.infradead.org,
	linux-kernel@...r.kernel.org,
	Fabio Aiuto <fabio.aiuto@...icam.com>,
	Michael Nazzareno Trimarchi <michael@...rulasolutions.com>,
	Matteo Lisi <matteo.lisi@...icam.com>,
	Mirko Ardinghi <mirko.ardinghi@...icam.com>
Subject: [PATCH v4 3/3] arm64: dts: imx93: Add Engicam i.Core MX93 EDIMM 2.0 Starter Kit

i.Core MX93 is a NXP i.MX93 based SoM by Enigcam which
needs to be mounted on top of Engicam baseboards.

Add support for EDIMM 2.0 Starter Kit hosting
i.Core MX93.

Starter Kit main features:

2x LVDS interfaces
HDMI output
Audio out
Mic in
Micro SD card slot
USB 3.0 A port
3x USB 2.0 A port
Gb Ethernet
2x CAN bus, 3x UART interfaces
SIM card slot
M.2 KEY_B slot

Cc: Michael Nazzareno Trimarchi <michael@...rulasolutions.com>
Cc: Matteo Lisi <matteo.lisi@...icam.com>
Cc: Mirko Ardinghi <mirko.ardinghi@...icam.com>
Signed-off-by: Fabio Aiuto <fabio.aiuto@...icam.com>
---
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../dts/freescale/imx93-icore-mx93-edimm2.dts | 344 ++++++++++++++++++
 2 files changed, 345 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-icore-mx93-edimm2.dts

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 045250d0a040..d26c0a458a44 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -226,6 +226,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-tqma8xqp-mba8xx.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-icore-mx93-edimm2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx93-icore-mx93-edimm2.dts b/arch/arm64/boot/dts/freescale/imx93-icore-mx93-edimm2.dts
new file mode 100644
index 000000000000..8b4f465e9cd1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-icore-mx93-edimm2.dts
@@ -0,0 +1,344 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 NXP
+ * Copyright 2024 Engicam s.r.l.
+ */
+
+/dts-v1/;
+
+#include "imx93-icore-mx93.dtsi"
+
+/ {
+	model = "Engicam i.Core MX93 - EDIMM 2 Starterkit";
+	compatible = "engicam,icore-mx93-edimm2", "engicam,icore-mx93",
+		     "fsl,imx93";
+
+	aliases {
+		rtc1 = &bbnsm_rtc;
+	};
+
+	bt_reg_on: regulator-btregon {
+		compatible = "regulator-gpio";
+		regulator-name = "BT_REG_ON";
+		regulator-min-microvolt = <100000>;
+		regulator-max-microvolt = <3300000>;
+		states = <3300000 0x1>, <100000 0x0>;
+		gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+	};
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	reg_1v8_sgtl: regulator-1v8-sgtl {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8_sgtl";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3v3_avdd_sgtl: regulator-3v3-avdd-sgtl {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3_avdd_sgtl";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_3v3_sgtl: regulator-3v3-sgtl {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3_sgtl";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			alloc-ranges = <0 0x80000000 0 0x40000000>;
+			size = <0 0x10000000>;
+			linux,cma-default;
+		};
+
+		rsc_table: rsc-table@...1f000 {
+			reg = <0 0x2021f000 0 0x1000>;
+			no-map;
+		};
+
+		vdevbuffer: vdevbuffer@...20000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa4020000 0 0x100000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@...00000 {
+			reg = <0 0xa4000000 0 0x8000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@...08000 {
+			reg = <0 0xa4008000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring0: vdev1vring0@...00000 {
+			reg = <0 0xa4010000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring1: vdev1vring1@...18000 {
+			reg = <0 0xa4018000 0 0x8000>;
+			no-map;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx93-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		/*simple-audio-card,mclk-fs = <1>;*/
+		simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			clocks = <&clk IMX93_CLK_SAI3_IPG>;
+		};
+	};
+
+	usdhc3_pwrseq: usdhc3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc3_pwrseq>;
+		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&cm33 {
+	mbox-names = "tx", "rx", "rxdb";
+	mboxes = <&mu1 0 1>,
+		 <&mu1 1 1>,
+		 <&mu1 3 1>;
+	memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
+			<&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
+	status = "okay";
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	fsl,stop-mode = <&aonmix_ns_gpr 0x10 4>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	fsl,stop-mode = <&aonmix_ns_gpr 0x10 4>;
+	status = "okay";
+};
+
+&lpi2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	pinctrl-1 = <&pinctrl_lpi2c1>;
+	status = "okay";
+
+	pcf8523: rtc@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		status = "okay";
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		clocks = <&clk IMX93_CLK_SAI3_GATE>;
+		VDDA-supply = <&reg_3v3_avdd_sgtl>;
+		VDDIO-supply = <&reg_3v3_sgtl>;
+		VDDD-supply = <&reg_1v8_sgtl>;
+	};
+};
+
+&lpuart1 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&lpuart5 { /* RS485 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&lpuart8 { /* RS232 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart8>;
+	status = "okay";
+};
+
+&micfil {
+	#sound-dai-cells = <0>;
+	assigned-clocks = <&clk IMX93_CLK_PDM>;
+	assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
+	assigned-clock-rates = <196608000>;
+	status = "okay";
+};
+
+&mu1 {
+	status = "okay";
+};
+
+&mu2 {
+	status = "okay";
+};
+
+&sai1 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	assigned-clocks = <&clk IMX93_CLK_SAI1>;
+	assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
+	assigned-clock-rates = <12288000>;
+	status = "okay";
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	#sound-dai-cells = <0>;
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX93_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
+	assigned-clock-rates = <24576000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&usdhc3 { /* WiFi */
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3>;
+	pinctrl-2 = <&pinctrl_usdhc3>;
+	mmc-pwrseq = <&usdhc3_pwrseq>;
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+	max-frequency = <25000000>;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&wdog3 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_bluetooth: bluetoothgrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO19__GPIO2_IO19		0x31e // BT_REG_ON
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX93_PAD_PDM_CLK__CAN1_TX		0x139e
+			MX93_PAD_PDM_BIT_STREAM0__CAN1_RX	0x139e
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO25__CAN2_TX	0x139e
+			MX93_PAD_GPIO_IO27__CAN2_RX	0x139e
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			MX93_PAD_I2C1_SCL__LPI2C1_SCL		0x40000b9e
+			MX93_PAD_I2C1_SDA__LPI2C1_SDA		0x40000b9e
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX93_PAD_SAI1_TXC__SAI1_TX_BCLK		0x31e
+			MX93_PAD_SAI1_TXFS__SAI1_TX_SYNC	0x31e
+			MX93_PAD_SAI1_TXD0__SAI1_TX_DATA00	0x31e
+			MX93_PAD_SAI1_RXD0__SAI1_RX_DATA00	0x31e
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO26__SAI3_TX_SYNC	0x31e
+			MX93_PAD_GPIO_IO16__SAI3_TX_BCLK	0x31e
+			MX93_PAD_GPIO_IO17__SAI3_MCLK		0x31e
+			MX93_PAD_GPIO_IO21__SAI3_TX_DATA00	0x31e
+			MX93_PAD_GPIO_IO20__SAI3_RX_DATA00	0x31e
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX		0x31e
+			MX93_PAD_UART1_TXD__LPUART1_TX		0x31e
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO01__LPUART5_RX		0x31e
+			MX93_PAD_GPIO_IO00__LPUART5_TX		0x31e
+			MX93_PAD_GPIO_IO02__LPUART5_CTS_B	0x31e
+			MX93_PAD_GPIO_IO03__LPUART5_RTS_B	0x31e
+		>;
+	};
+
+	pinctrl_uart8: uart8grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO13__LPUART8_RX		0x31e
+			MX93_PAD_GPIO_IO12__LPUART8_TX		0x31e
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__USDHC3_CLK		0x17fe
+			MX93_PAD_SD3_CMD__USDHC3_CMD		0x13fe
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0	0x13fe
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1        0x13fe
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2        0x13fe
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3        0x13fe
+		>;
+	};
+
+	pinctrl_usdhc3_pwrseq: usdhc3pwrseqgrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO22__GPIO2_IO22		0x31e // WL_REG_ON
+		>;
+	};
+
+};
-- 
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ