linux-kernel - Re: [PATCH V5 RESEND 3/5] clk: qcom: gdsc: Add set and get hwmode callbacks to switch GDSC mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <e419c6aa-6bb2-48ff-bacb-17a2e85856ea@quicinc.com>
Date: Wed, 24 Apr 2024 15:17:24 +0530
From: Jagadeesh Kona <quic_jkona@...cinc.com>
To: Bryan O'Donoghue <bryan.odonoghue@...aro.org>,
        Bjorn Andersson
	<andersson@...nel.org>,
        Michael Turquette <mturquette@...libre.com>,
        "Stephen
 Boyd" <sboyd@...nel.org>,
        Stanimir Varbanov <stanimir.k.varbanov@...il.com>,
        Vikash Garodia <quic_vgarodia@...cinc.com>,
        Mauro Carvalho Chehab
	<mchehab@...nel.org>,
        Ulf Hansson <ulf.hansson@...aro.org>,
        "Rafael J .
 Wysocki" <rafael@...nel.org>,
        Kevin Hilman <khilman@...nel.org>, Pavel Machek
	<pavel@....cz>,
        Len Brown <len.brown@...el.com>,
        Greg Kroah-Hartman
	<gregkh@...uxfoundation.org>,
        Konrad Dybcio <konrad.dybcio@...aro.org>,
        "Andy
 Gross" <agross@...nel.org>,
        Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
        Abel Vesa <abel.vesa@...aro.org>
CC: <linux-arm-msm@...r.kernel.org>, <linux-clk@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <linux-media@...r.kernel.org>,
        <linux-pm@...r.kernel.org>, Taniya Das <quic_tdas@...cinc.com>,
        "Satya Priya
 Kakitapalli" <quic_skakitap@...cinc.com>,
        Imran Shaik
	<quic_imrashai@...cinc.com>,
        Ajit Pandey <quic_ajipan@...cinc.com>
Subject: Re: [PATCH V5 RESEND 3/5] clk: qcom: gdsc: Add set and get hwmode
 callbacks to switch GDSC mode



On 4/24/2024 5:18 AM, Bryan O'Donoghue wrote:
> On 13/04/2024 16:20, Jagadeesh Kona wrote:
>> Some GDSC client drivers require the GDSC mode to be switched dynamically
>> to HW mode at runtime to gain the power benefits. Typically such client
>> drivers require the GDSC to be brought up in SW mode initially to enable
>> the required dependent clocks and configure the hardware to proper state.
>> Once initial hardware set up is done, they switch the GDSC to HW mode to
>> save power. At the end of usecase, they switch the GDSC back to SW mode
>> and disable the GDSC.
>>
>> Introduce HW_CTRL_TRIGGER flag to register the set_hwmode_dev and
>> get_hwmode_dev callbacks for GDSC's whose respective client drivers
>> require the GDSC mode to be switched dynamically at runtime using
>> dev_pm_genpd_set_hwmode() API.
>>
>> Signed-off-by: Jagadeesh Kona <quic_jkona@...cinc.com>
>> Signed-off-by: Abel Vesa <abel.vesa@...aro.org>
>> ---
>>   drivers/clk/qcom/gdsc.c | 37 +++++++++++++++++++++++++++++++++++++
>>   drivers/clk/qcom/gdsc.h |  1 +
>>   2 files changed, 38 insertions(+)
>>
>> diff --git a/drivers/clk/qcom/gdsc.c b/drivers/clk/qcom/gdsc.c
>> index df9618ab7eea..c5f6be8181d8 100644
>> --- a/drivers/clk/qcom/gdsc.c
>> +++ b/drivers/clk/qcom/gdsc.c
>> @@ -363,6 +363,39 @@ static int gdsc_disable(struct generic_pm_domain 
>> *domain)
>>       return 0;
>>   }
>> +static int gdsc_set_hwmode(struct generic_pm_domain *domain, struct 
>> device *dev, bool mode)
>> +{
>> +    struct gdsc *sc = domain_to_gdsc(domain);
>> +    int ret;
>> +
>> +    ret = gdsc_hwctrl(sc, mode);
>> +    if (ret)
>> +        return ret;
>> +
>> +    /* Wait for 1usec for mode transition to properly complete */
>> +    udelay(1);
> 
> A delay I suspect you don't need - if the HW spec says "takes 1 usec for 
> this to take effect" that's 1 usec from io write completion from APSS to 
> another system agent.
> 
> You poll for the state transition down below anyway.
> 
> I'd be pretty certain that's a redundant delay.
> 

Thanks Bryan for your review!

This 1usec delay is needed every time GDSC is moved in and out of HW 
control mode and the reason for same is explained in one of the older 
gdsc driver change at below link

https://lore.kernel.org/all/1484027679-18397-1-git-send-email-rnayak@codeaurora.org/ 


Thanks,
Jagadeesh

>> +
>> +    /*
>> +     * When GDSC is switched to HW mode, HW can disable the GDSC.
>> +     * When GDSC is switched back to SW mode, the GDSC will be enabled
>> +     * again, hence need to poll for GDSC to complete the power up.
>> +     */
>> +    if (!mode)
>> +        return gdsc_poll_status(sc, GDSC_ON);
>> +
>> +    return 0;
>> +}
> 
> Other than that, seems fine.
> 
> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@...aro.org>
>