| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240424133023.4150624-4-danieller@nvidia.com>
Date: Wed, 24 Apr 2024 16:30:16 +0300
From: Danielle Ratson <danieller@...dia.com>
To: <netdev@...r.kernel.org>
CC: <davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
<pabeni@...hat.com>, <corbet@....net>, <linux@...linux.org.uk>,
<sdf@...gle.com>, <kory.maincent@...tlin.com>,
<maxime.chevallier@...tlin.com>, <vladimir.oltean@....com>,
<przemyslaw.kitszel@...el.com>, <ahmed.zaki@...el.com>,
<richardcochran@...il.com>, <shayagr@...zon.com>, <paul.greenwalt@...el.com>,
<jiri@...nulli.us>, <linux-doc@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <mlxsw@...dia.com>, <petrm@...dia.com>,
<idosch@...dia.com>, <danieller@...dia.com>
Subject: [PATCH net-next v5 03/10] ethtool: Add an interface for flashing transceiver modules' firmware
CMIS compliant modules such as QSFP-DD might be running a firmware that
can be updated in a vendor-neutral way by exchanging messages between
the host and the module as described in section 7.3.1 of revision 5.2 of
the CMIS standard.
Add a pair of new ethtool messages that allow:
* User space to trigger firmware update of transceiver modules
* The kernel to notify user space about the progress of the process
The user interface is designed to be asynchronous in order to avoid
RTNL being held for too long and to allow several modules to be
updated simultaneously. The interface is designed with CMIS compliant
modules in mind, but kept generic enough to accommodate future use
cases, if these arise.
Signed-off-by: Danielle Ratson <danieller@...dia.com>
---
Notes:
v5:
* Modify tools/net/ynl/Makefile.deps so the ynl file will
include the ethtool.h changes.
* u64>uint for 'total' and 'done' attrs.
* Translate the enum from ethtool_netlink.h to YAML.
v4:
* s/is composed from/consists of/.
Documentation/netlink/specs/ethtool.yaml | 55 +++++++++++++++++
Documentation/networking/ethtool-netlink.rst | 62 ++++++++++++++++++++
include/uapi/linux/ethtool.h | 18 ++++++
include/uapi/linux/ethtool_netlink.h | 20 +++++++
tools/net/ynl/Makefile.deps | 3 +-
5 files changed, 157 insertions(+), 1 deletion(-)
diff --git a/Documentation/netlink/specs/ethtool.yaml b/Documentation/netlink/specs/ethtool.yaml
index 00dc61358be8..43c5f21e6096 100644
--- a/Documentation/netlink/specs/ethtool.yaml
+++ b/Documentation/netlink/specs/ethtool.yaml
@@ -20,6 +20,10 @@ definitions:
name: header-flags
type: flags
entries: [ compact-bitsets, omit-reply, stats ]
+ -
+ name: module-fw-flash-status
+ type: enum
+ entries: [ started, in_progress, completed, error ]
attribute-sets:
-
@@ -975,6 +979,32 @@ attribute-sets:
-
name: burst-tmr
type: u32
+ -
+ name: module-fw-flash
+ attributes:
+ -
+ name: header
+ type: nest
+ nested-attributes: header
+ -
+ name: file-name
+ type: string
+ -
+ name: password
+ type: u32
+ -
+ name: status
+ type: u32
+ enum: module-fw-flash-status
+ -
+ name: status-msg
+ type: string
+ -
+ name: done
+ type: uint
+ -
+ name: total
+ type: uint
operations:
enum-model: directional
@@ -1730,3 +1760,28 @@ operations:
name: mm-ntf
doc: Notification for change in MAC Merge configuration.
notify: mm-get
+ -
+ name: module-fw-flash-act
+ doc: Flash transceiver module firmware.
+
+ attribute-set: module-fw-flash
+
+ do:
+ request:
+ attributes:
+ - header
+ - file-name
+ - password
+ -
+ name: module-fw-flash-ntf
+ doc: Notification for firmware flashing progress and status.
+
+ attribute-set: module-fw-flash
+
+ event:
+ attributes:
+ - header
+ - status
+ - status-msg
+ - done
+ - total
diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst
index 8bc71f249448..14082b6a8f41 100644
--- a/Documentation/networking/ethtool-netlink.rst
+++ b/Documentation/networking/ethtool-netlink.rst
@@ -235,6 +235,7 @@ Userspace to kernel:
``ETHTOOL_MSG_PLCA_GET_STATUS`` get PLCA RS status
``ETHTOOL_MSG_MM_GET`` get MAC merge layer state
``ETHTOOL_MSG_MM_SET`` set MAC merge layer parameters
+ ``ETHTOOL_MSG_MODULE_FW_FLASH_ACT`` flash transceiver module firmware
===================================== =================================
Kernel to userspace:
@@ -281,6 +282,7 @@ Kernel to userspace:
``ETHTOOL_MSG_PLCA_GET_STATUS_REPLY`` PLCA RS status
``ETHTOOL_MSG_PLCA_NTF`` PLCA RS parameters
``ETHTOOL_MSG_MM_GET_REPLY`` MAC merge layer status
+ ``ETHTOOL_MSG_MODULE_FW_FLASH_NTF`` transceiver module flash updates
======================================== =================================
``GET`` requests are sent by userspace applications to retrieve device
@@ -2040,6 +2042,65 @@ The attributes are propagated to the driver through the following structure:
.. kernel-doc:: include/linux/ethtool.h
:identifiers: ethtool_mm_cfg
+MODULE_FW_FLASH_ACT
+===================
+
+Flashes transceiver module firmware.
+
+Request contents:
+
+ ======================================= ====== ===========================
+ ``ETHTOOL_A_MODULE_FW_FLASH_HEADER`` nested request header
+ ``ETHTOOL_A_MODULE_FW_FLASH_FILE_NAME`` string firmware image file name
+ ``ETHTOOL_A_MODULE_FW_FLASH_PASSWORD`` u32 transceiver module password
+ ======================================= ====== ===========================
+
+The firmware update process consists of three logical steps:
+
+1. Downloading a firmware image to the transceiver module and validating it.
+2. Running the firmware image.
+3. Committing the firmware image so that it is run upon reset.
+
+When flash command is given, those three steps are taken in that order.
+
+The ``ETHTOOL_A_MODULE_FW_FLASH_FILE_NAME`` attribute encodes the firmware
+image file name. The firmware image is downloaded to the transceiver module,
+validated, run and committed.
+
+The optional ``ETHTOOL_A_MODULE_FW_FLASH_PASSWORD`` attribute encodes a password
+that might be required as part of the transceiver module firmware update
+process.
+
+The firmware update process can take several minutes to complete. Therefore,
+during the update process notifications are emitted from the kernel to user
+space updating it about the status and progress.
+
+Notification contents:
+
+ +---------------------------------------------------+--------+----------------+
+ | ``ETHTOOL_A_MODULE_FW_FLASH_HEADER`` | nested | reply header |
+ +---------------------------------------------------+--------+----------------+
+ | ``ETHTOOL_A_MODULE_FW_FLASH_STATUS`` | u32 | status |
+ +---------------------------------------------------+--------+----------------+
+ | ``ETHTOOL_A_MODULE_FW_FLASH_STATUS_MSG`` | string | status message |
+ +---------------------------------------------------+--------+----------------+
+ | ``ETHTOOL_A_MODULE_FW_FLASH_DONE`` | uint | progress |
+ +---------------------------------------------------+--------+----------------+
+ | ``ETHTOOL_A_MODULE_FW_FLASH_TOTAL`` | uint | total |
+ +---------------------------------------------------+--------+----------------+
+
+The ``ETHTOOL_A_MODULE_FW_FLASH_STATUS`` attribute encodes the current status
+of the firmware update process. Possible values are:
+
+.. kernel-doc:: include/uapi/linux/ethtool.h
+ :identifiers: ethtool_module_fw_flash_status
+
+The ``ETHTOOL_A_MODULE_FW_FLASH_STATUS_MSG`` attribute encodes a status message
+string.
+
+The ``ETHTOOL_A_MODULE_FW_FLASH_DONE`` and ``ETHTOOL_A_MODULE_FW_FLASH_TOTAL``
+attributes encode the completed and total amount of work, respectively.
+
Request translation
===================
@@ -2146,4 +2207,5 @@ are netlink only.
n/a ``ETHTOOL_MSG_PLCA_GET_STATUS``
n/a ``ETHTOOL_MSG_MM_GET``
n/a ``ETHTOOL_MSG_MM_SET``
+ n/a ``ETHTOOL_MSG_MODULE_FW_FLASH_ACT``
=================================== =====================================
diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h
index 041e09c3515d..ac98328f527d 100644
--- a/include/uapi/linux/ethtool.h
+++ b/include/uapi/linux/ethtool.h
@@ -877,6 +877,24 @@ enum ethtool_mm_verify_status {
ETHTOOL_MM_VERIFY_STATUS_DISABLED,
};
+/**
+ * enum ethtool_module_fw_flash_status - plug-in module firmware flashing status
+ * @ETHTOOL_MODULE_FW_FLASH_STATUS_STARTED: The firmware flashing process has
+ * started.
+ * @ETHTOOL_MODULE_FW_FLASH_STATUS_IN_PROGRESS: The firmware flashing process
+ * is in progress.
+ * @ETHTOOL_MODULE_FW_FLASH_STATUS_COMPLETED: The firmware flashing process was
+ * completed successfully.
+ * @ETHTOOL_MODULE_FW_FLASH_STATUS_ERROR: The firmware flashing process was
+ * stopped due to an error.
+ */
+enum ethtool_module_fw_flash_status {
+ ETHTOOL_MODULE_FW_FLASH_STATUS_STARTED = 1,
+ ETHTOOL_MODULE_FW_FLASH_STATUS_IN_PROGRESS,
+ ETHTOOL_MODULE_FW_FLASH_STATUS_COMPLETED,
+ ETHTOOL_MODULE_FW_FLASH_STATUS_ERROR,
+};
+
/**
* struct ethtool_gstrings - string set for data tagging
* @cmd: Command number = %ETHTOOL_GSTRINGS
diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h
index f17dbe54bf5e..6fbd43d5a4ea 100644
--- a/include/uapi/linux/ethtool_netlink.h
+++ b/include/uapi/linux/ethtool_netlink.h
@@ -57,6 +57,7 @@ enum {
ETHTOOL_MSG_PLCA_GET_STATUS,
ETHTOOL_MSG_MM_GET,
ETHTOOL_MSG_MM_SET,
+ ETHTOOL_MSG_MODULE_FW_FLASH_ACT,
/* add new constants above here */
__ETHTOOL_MSG_USER_CNT,
@@ -109,6 +110,7 @@ enum {
ETHTOOL_MSG_PLCA_NTF,
ETHTOOL_MSG_MM_GET_REPLY,
ETHTOOL_MSG_MM_NTF,
+ ETHTOOL_MSG_MODULE_FW_FLASH_NTF,
/* add new constants above here */
__ETHTOOL_MSG_KERNEL_CNT,
@@ -997,6 +999,24 @@ enum {
ETHTOOL_A_MM_MAX = (__ETHTOOL_A_MM_CNT - 1)
};
+/* MODULE_FW_FLASH */
+
+enum {
+ ETHTOOL_A_MODULE_FW_FLASH_UNSPEC,
+ ETHTOOL_A_MODULE_FW_FLASH_HEADER, /* nest - _A_HEADER_* */
+ ETHTOOL_A_MODULE_FW_FLASH_FILE_NAME, /* string */
+ ETHTOOL_A_MODULE_FW_FLASH_PASSWORD, /* u32 */
+ ETHTOOL_A_MODULE_FW_FLASH_PAD,
+ ETHTOOL_A_MODULE_FW_FLASH_STATUS, /* u32 */
+ ETHTOOL_A_MODULE_FW_FLASH_STATUS_MSG, /* string */
+ ETHTOOL_A_MODULE_FW_FLASH_DONE, /* uint */
+ ETHTOOL_A_MODULE_FW_FLASH_TOTAL, /* uint */
+
+ /* add new constants above here */
+ __ETHTOOL_A_MODULE_FW_FLASH_CNT,
+ ETHTOOL_A_MODULE_FW_FLASH_MAX = (__ETHTOOL_A_MODULE_FW_FLASH_CNT - 1)
+};
+
/* generic netlink info */
#define ETHTOOL_GENL_NAME "ethtool"
#define ETHTOOL_GENL_VERSION 1
diff --git a/tools/net/ynl/Makefile.deps b/tools/net/ynl/Makefile.deps
index f4e8eb79c1b8..dbdca32a1c61 100644
--- a/tools/net/ynl/Makefile.deps
+++ b/tools/net/ynl/Makefile.deps
@@ -16,7 +16,8 @@ get_hdr_inc=-D$(1) -include $(UAPI_PATH)/linux/$(2)
CFLAGS_devlink:=$(call get_hdr_inc,_LINUX_DEVLINK_H_,devlink.h)
CFLAGS_dpll:=$(call get_hdr_inc,_LINUX_DPLL_H,dpll.h)
-CFLAGS_ethtool:=$(call get_hdr_inc,_LINUX_ETHTOOL_NETLINK_H_,ethtool_netlink.h)
+CFLAGS_ethtool:=$(call get_hdr_inc,_LINUX_ETHTOOL_H,ethtool.h) \
+ $(call get_hdr_inc,_LINUX_ETHTOOL_NETLINK_H_,ethtool_netlink.h)
CFLAGS_handshake:=$(call get_hdr_inc,_LINUX_HANDSHAKE_H,handshake.h)
CFLAGS_mptcp_pm:=$(call get_hdr_inc,_LINUX_MPTCP_PM_H,mptcp_pm.h)
CFLAGS_netdev:=$(call get_hdr_inc,_LINUX_NETDEV_H,netdev.h)
--
2.43.0
Powered by blists - more mailing lists