lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240426182011.2156856-1-vattunuru@marvell.com>
Date: Fri, 26 Apr 2024 11:20:11 -0700
From: Vamsi Attunuru <vattunuru@...vell.com>
To: <arnd@...db.de>, <gregkh@...uxfoundation.org>
CC: <vattunuru@...vell.com>, <jerinj@...vell.com>,
        <linux-kernel@...r.kernel.org>
Subject: [PATCH v6 1/1] misc: mrvl-cn10k-dpi: add Octeon CN10K DPI administrative driver

Adds a misc driver for Marvell CN10K DPI(DMA Engine) device's physical
function which initializes DPI DMA hardware's global configuration and
enables hardware mailbox channels between physical function (PF) and
it's virtual functions (VF). VF device drivers (User space drivers) use
this hw mailbox to communicate any required device configuration on it's
respective VF device. Accordingly, this DPI PF driver provisions the
VF device resources.

At the hardware level, the DPI physical function (PF) acts as a management
interface to setup the VF device resources, VF devices are only provisioned
to handle or control the actual DMA Engine's data transfer capabilities.

Signed-off-by: Vamsi Attunuru <vattunuru@...vell.com>
---
Changes V5 -> V6:
- Updated documentation
- Fixed data types in uapi file

Changes V4 -> V5:
- Fixed license and data types in uapi file

Changes V3 -> V4:
- Moved ioctl definations to .h file
- Fixed structure alignements which are passed in ioctl

Changes V2 -> V3:
- Added ioctl operation to the fops
- Used managed version of kzalloc & request_irq
- Addressed miscellaneous comments

Changes V1 -> V2:
- Fixed return values and busy-wait loops
- Merged .h file into .c file
- Fixed directory structure
- Removed module params
- Registered the device as misc device

Below are the userspace code details that interacts with this kernel driver.

driver/roc_dpi.c provides the mailbox interface to communicate with this kernel driver.[1]
application/main.c is the DPI DMA application which uses this misc driver to configure.
the device with required mps, mrrs, fifo_mask parameters. [2]

[1]. https://github.com/VamsiKrishnaA99/dpi-dma/blob/main/driver/roc_dpi.c
[2]. https://github.com/VamsiKrishnaA99/dpi-dma/blob/main/application/main.c

 Documentation/misc-devices/index.rst          |   1 +
 Documentation/misc-devices/mrvl_cn10k_dpi.rst |  43 ++
 .../userspace-api/ioctl/ioctl-number.rst      |   1 +
 MAINTAINERS                                   |   5 +
 drivers/misc/Kconfig                          |  13 +
 drivers/misc/Makefile                         |   2 +
 drivers/misc/mrvl_cn10k_dpi.c                 | 685 ++++++++++++++++++
 include/uapi/misc/mrvl_cn10k_dpi.h            |  37 +
 8 files changed, 787 insertions(+)

diff --git a/Documentation/misc-devices/index.rst b/Documentation/misc-devices/index.rst
index 2d0ce9138588..10f2e0f74e45 100644
--- a/Documentation/misc-devices/index.rst
+++ b/Documentation/misc-devices/index.rst
@@ -20,6 +20,7 @@ fit into other categories.
    ics932s401
    isl29003
    lis3lv02d
+   mrvl_cn10k_dpi
    max6875
    oxsemi-tornado
    pci-endpoint-test
diff --git a/Documentation/misc-devices/mrvl_cn10k_dpi.rst b/Documentation/misc-devices/mrvl_cn10k_dpi.rst
new file mode 100644
index 000000000000..a1a914fb2d27
--- /dev/null
+++ b/Documentation/misc-devices/mrvl_cn10k_dpi.rst
@@ -0,0 +1,43 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============================================
+Marvell CN10K DMA packet interface (DPI) driver
+===============================================
+
+Overview
+========
+
+DPI is a DMA packet interface hardware block in Marvell's CN10K silicon.
+DPI hardware comprises a physical function (PF), its virtual functions,
+mailbox logic, and a set of DMA engines & DMA command queues.
+
+DPI PF function is an administrative function which services the mailbox
+requests from its VF functions and provisions DMA engine resources to
+it's VF functions.
+
+mrvl_cn10k_dpi.ko misc driver loads on DPI PF device and services the
+mailbox commands submitted by the VF devices and accordingly initializes
+the DMA engines and VF device's DMA command queues. Also, driver creates
+/dev/mrvl-cn10k-dpi node to set DMA engine and pem port attributes like
+fifo length, molr, mps & mrrs.
+
+DPI PF driver is just an administrative driver to setup its VF device's
+queues and provisions the hardware resources, it can not initiate any
+DMA operations. Only VF devices are provisioned with DMA capabilities.
+
+Driver location
+===============
+
+drivers/misc/mrvl_cn10k_dpi.c
+
+Driver IOCTLs
+=============
+
+:c:macro::`DPI_MPS_MRRS_CFG`
+ioctl that sets max payload size & max read request size parameters of
+a pem port to which DMA engines are wired.
+
+
+:c:macro::`DPI_ENGINE_CFG`
+ioctl that sets DMA engine's fifo sizes & max outstanding load request
+thresholds.
diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst
index 457e16f06e04..e6fd0c386b59 100644
--- a/Documentation/userspace-api/ioctl/ioctl-number.rst
+++ b/Documentation/userspace-api/ioctl/ioctl-number.rst
@@ -358,6 +358,7 @@ Code  Seq#    Include File                                           Comments
 0xB6  all    linux/fpga-dfl.h
 0xB7  all    uapi/linux/remoteproc_cdev.h                            <mailto:linux-remoteproc@...r.kernel.org>
 0xB7  all    uapi/linux/nsfs.h                                       <mailto:Andrei Vagin <avagin@...nvz.org>>
+0xB8  01-02  uapi/misc/mrvl_cn10k_dpi.h                              Marvell CN10K DPI driver
 0xC0  00-0F  linux/usb/iowarrior.h
 0xCA  00-0F  uapi/misc/cxl.h
 0xCA  10-2F  uapi/misc/ocxl.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 960512bec428..ab77232d583e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13104,6 +13104,11 @@ S:	Supported
 F:	Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml
 F:	drivers/mmc/host/sdhci-xenon*
 
+MARVELL OCTEON CN10K DPI DRIVER
+M:	Vamsi Attunuru <vattunuru@...vell.com>
+S:	Maintained
+F:	drivers/misc/mrvl_cn10k_dpi.c
+
 MATROX FRAMEBUFFER DRIVER
 L:	linux-fbdev@...r.kernel.org
 S:	Orphan
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 4fb291f0bf7c..78470ef2538f 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -574,6 +574,19 @@ config NSM
 	  To compile this driver as a module, choose M here.
 	  The module will be called nsm.
 
+config MARVELL_CN10K_DPI
+	tristate "Octeon CN10K DPI driver"
+	depends on ARM64 && PCI
+	help
+	  Enables Octeon CN10K DMA packet interface (DPI) driver which intializes
+	  DPI hardware's physical function (PF) device's global configuration and
+	  its virtual function's (VFs) resource configuration to enable DMA transfers.
+	  DPI PF device does not have any data movement functionality, it only serves
+	  VF's resource configuration requests.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called mrvl_cn10k_dpi.
+
 source "drivers/misc/c2port/Kconfig"
 source "drivers/misc/eeprom/Kconfig"
 source "drivers/misc/cb710/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index ea6ea5bbbc9c..5106bf96ea5c 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -68,3 +68,5 @@ obj-$(CONFIG_TMR_INJECT)	+= xilinx_tmr_inject.o
 obj-$(CONFIG_TPS6594_ESM)	+= tps6594-esm.o
 obj-$(CONFIG_TPS6594_PFSM)	+= tps6594-pfsm.o
 obj-$(CONFIG_NSM)		+= nsm.o
+obj-$(CONFIG_MARVELL_CN10K_DPI)	+= mrvl_cn10k_dpi.o
+obj-y	+= mrvl_cn10k_dpi.o
diff --git a/drivers/misc/mrvl_cn10k_dpi.c b/drivers/misc/mrvl_cn10k_dpi.c
new file mode 100644
index 000000000000..bd99583994f9
--- /dev/null
+++ b/drivers/misc/mrvl_cn10k_dpi.c
@@ -0,0 +1,685 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Marvell Octeon CN10K DPI driver
+ *
+ * Copyright (C) 2024 Marvell.
+ *
+ */
+
+#include <linux/compat.h>
+#include <linux/delay.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include <uapi/misc/mrvl_cn10k_dpi.h>
+
+#define DPI_DRV_NAME	"mrvl-cn10k-dpi"
+
+/* PCI device IDs */
+#define PCI_DEVID_MRVL_CN10K_DPI_PF	0xA080
+#define PCI_SUBDEVID_MRVL_CN10K_DPI_PF	0xB900
+
+/* PCI BAR nos */
+#define PCI_DPI_CFG_BAR	0
+
+/* MSI-X interrupts */
+#define DPI_MAX_REQQ_INT 32
+#define DPI_MAX_CC_INT   64
+
+/* MBOX MSI-X interrupt vector index */
+#define DPI_MBOX_PF_VF_INT_IDX 0x75
+
+#define DPI_MAX_IRQS (DPI_MBOX_PF_VF_INT_IDX + 1)
+
+#define DPI_MAX_VFS	32
+
+#define DPI_ENGINE_MASK GENMASK(2, 0)
+
+#define DPI_DMA_IDS_DMA_NPA_PF_FUNC(x)		(((x) & GENMASK_ULL(15, 0)) << 16)
+#define DPI_DMA_IDS_INST_STRM(x)		(((x) & GENMASK_ULL(7, 0)) << 40)
+#define DPI_DMA_IDS_DMA_STRM(x)			(((x) & GENMASK_ULL(7, 0)) << 32)
+#define DPI_DMA_ENG_EN_MOLR(x)			(((x) & GENMASK_ULL(9, 0)) << 32)
+#define DPI_EBUS_PORTX_CFG_MPS(x)		(((x) & GENMASK(2, 0)) << 4)
+#define DPI_DMA_IDS_DMA_SSO_PF_FUNC(x)		((x) & GENMASK(15, 0))
+#define DPI_DMA_IDS2_INST_AURA(x)		((x) & GENMASK(19, 0))
+#define DPI_DMA_IBUFF_CSIZE_CSIZE(x)		((x) & GENMASK(13, 0))
+#define DPI_EBUS_PORTX_CFG_MRRS(x)		((x) & GENMASK(2, 0))
+#define DPI_ENG_BUF_BLKS(x)			((x) & GENMASK(5, 0))
+#define DPI_DMA_CONTROL_DMA_ENB			GENMASK_ULL(53, 48)
+
+#define DPI_DMA_CONTROL_O_MODE			BIT_ULL(14)
+#define DPI_DMA_CONTROL_LDWB			BIT_ULL(32)
+#define DPI_DMA_CONTROL_WQECSMODE1		BIT_ULL(37)
+#define DPI_DMA_CONTROL_ZBWCSEN			BIT_ULL(39)
+#define DPI_DMA_CONTROL_WQECSOFF(offset)	(((u64)offset) << 40)
+#define DPI_DMA_CONTROL_WQECSDIS		BIT_ULL(47)
+#define DPI_DMA_CONTROL_PKT_EN			BIT_ULL(56)
+#define DPI_DMA_IBUFF_CSIZE_NPA_FREE		BIT(16)
+
+#define DPI_CTL_EN				BIT_ULL(0)
+#define DPI_DMA_CC_INT				BIT_ULL(0)
+#define DPI_DMA_QRST				BIT_ULL(0)
+
+#define DPI_REQQ_INT_INSTRFLT			BIT_ULL(0)
+#define DPI_REQQ_INT_RDFLT			BIT_ULL(1)
+#define DPI_REQQ_INT_WRFLT			BIT_ULL(2)
+#define DPI_REQQ_INT_CSFLT			BIT_ULL(3)
+#define DPI_REQQ_INT_INST_DBO			BIT_ULL(4)
+#define DPI_REQQ_INT_INST_ADDR_NULL		BIT_ULL(5)
+#define DPI_REQQ_INT_INST_FILL_INVAL		BIT_ULL(6)
+#define DPI_REQQ_INT_INSTR_PSN			BIT_ULL(7)
+
+#define DPI_REQQ_INT \
+	(DPI_REQQ_INT_INSTRFLT		| \
+	DPI_REQQ_INT_RDFLT		| \
+	DPI_REQQ_INT_WRFLT		| \
+	DPI_REQQ_INT_CSFLT		| \
+	DPI_REQQ_INT_INST_DBO		| \
+	DPI_REQQ_INT_INST_ADDR_NULL	| \
+	DPI_REQQ_INT_INST_FILL_INVAL	| \
+	DPI_REQQ_INT_INSTR_PSN)
+
+#define DPI_PF_RAS_EBI_DAT_PSN	BIT_ULL(0)
+#define DPI_PF_RAS_NCB_DAT_PSN	BIT_ULL(1)
+#define DPI_PF_RAS_NCB_CMD_PSN	BIT_ULL(2)
+
+#define DPI_PF_RAS_INT \
+	(DPI_PF_RAS_EBI_DAT_PSN  | \
+	 DPI_PF_RAS_NCB_DAT_PSN  | \
+	 DPI_PF_RAS_NCB_CMD_PSN)
+
+#define DPI_DMAX_IBUFF_CSIZE(x)	(0x0ULL | ((x) << 11))
+#define DPI_DMAX_IDS(x)		(0x18ULL | ((x) << 11))
+#define DPI_DMAX_IDS2(x)	(0x20ULL | ((x) << 11))
+#define DPI_DMAX_QRST(x)	(0x30ULL | ((x) << 11))
+
+#define DPI_CTL		0x10010ULL
+#define DPI_DMA_CONTROL 0x10018ULL
+#define DPI_DMA_ENGX_EN(x) (0x10040ULL | ((x) << 3))
+#define DPI_ENGX_BUF(x)	(0x100C0ULL | ((x) << 3))
+
+#define DPI_EBUS_PORTX_CFG(x) (0x10100ULL | ((x) << 3))
+
+#define DPI_PF_RAS 0x10308ULL
+#define DPI_PF_RAS_ENA_W1C 0x10318ULL
+
+#define DPI_DMA_CCX_INT(x) (0x11000ULL | ((x) << 3))
+#define DPI_DMA_CCX_INT_ENA_W1C(x) (0x11800ULL | ((x) << 3))
+
+#define DPI_REQQX_INT(x) (0x12C00ULL | ((x) << 5))
+#define DPI_REQQX_INT_ENA_W1C(x) (0x13800ULL | ((x) << 5))
+
+#define DPI_MBOX_PF_VF_DATA0(x) (0x16000ULL | ((x) << 4))
+#define DPI_MBOX_PF_VF_DATA1(x) (0x16008ULL | ((x) << 4))
+
+#define DPI_MBOX_VF_PF_INT 0x16300ULL
+#define DPI_MBOX_VF_PF_INT_W1S 0x16308ULL
+#define DPI_MBOX_VF_PF_INT_ENA_W1C 0x16310ULL
+#define DPI_MBOX_VF_PF_INT_ENA_W1S 0x16318ULL
+
+#define DPI_WCTL_FIF_THR 0x17008ULL
+
+#define DPI_EBUS_MAX_PORTS 2
+
+#define DPI_EBUS_MRRS_MIN 128
+#define DPI_EBUS_MRRS_MAX 1024
+#define DPI_EBUS_MPS_MIN  128
+#define DPI_EBUS_MPS_MAX  1024
+#define DPI_WCTL_FIFO_THRESHOLD 0x30
+
+#define DPI_QUEUE_OPEN  0x1
+#define DPI_QUEUE_CLOSE 0x2
+#define DPI_REG_DUMP    0x3
+#define DPI_GET_REG_CFG 0x4
+#define DPI_QUEUE_OPEN_V2 0x5
+
+enum dpi_mbox_rsp_type {
+	DPI_MBOX_TYPE_CMD,
+	DPI_MBOX_TYPE_RSP_ACK,
+	DPI_MBOX_TYPE_RSP_NACK,
+};
+
+struct dpivf_config {
+	u16 csize;
+	u32 aura;
+	u16 sso_pf_func;
+	u16 npa_pf_func;
+};
+
+struct dpipf_vf {
+	u8 this_vfid;
+	bool setup_done;
+	struct dpivf_config vf_config;
+};
+
+/* DPI device mailbox */
+struct dpi_mbox {
+	struct work_struct work;
+	/* lock to serialize mbox requests */
+	struct mutex lock;
+	struct dpipf *pf;
+	u8 __iomem *pf_vf_data_reg;
+	u8 __iomem *vf_pf_data_reg;
+};
+
+struct dpipf {
+	struct miscdevice miscdev;
+	void __iomem *reg_base;
+	struct pci_dev *pdev;
+	struct dpipf_vf vf[DPI_MAX_VFS];
+	/* Mailbox to talk to VFs */
+	struct dpi_mbox *mbox[DPI_MAX_VFS];
+};
+
+union dpi_mbox_message_t {
+	u64 u[2];
+	struct dpi_mbox_message_s {
+		/* VF ID to configure */
+		u64 vfid           :8;
+		/* Command code */
+		u64 cmd            :4;
+		/* Command buffer size in 8-byte words */
+		u64 csize          :14;
+		/* Aura of the command buffer */
+		u64 aura           :20;
+		/* SSO PF function */
+		u64 sso_pf_func    :16;
+		/* NPA PF function */
+		u64 npa_pf_func    :16;
+		/* Work queue completion status enable */
+		u64 wqecs	:1;
+		/* Work queue completion status byte offset */
+		u64 wqecsoff	:7;
+		/* Reserved */
+		u64 rsvd	:42;
+	} s __packed;
+};
+
+static inline void dpi_reg_write(struct dpipf *dpi, u64 offset, u64 val)
+{
+	writeq(val, dpi->reg_base + offset);
+}
+
+static inline u64 dpi_reg_read(struct dpipf *dpi, u64 offset)
+{
+	return readq(dpi->reg_base + offset);
+}
+
+static void dpi_wqe_cs_offset(struct dpipf *dpi, u8 offset)
+{
+	u64 reg;
+
+	reg = dpi_reg_read(dpi, DPI_DMA_CONTROL);
+	reg &= ~DPI_DMA_CONTROL_WQECSDIS;
+	reg |= DPI_DMA_CONTROL_ZBWCSEN | DPI_DMA_CONTROL_WQECSMODE1;
+	reg |= DPI_DMA_CONTROL_WQECSOFF(offset);
+	dpi_reg_write(dpi, DPI_DMA_CONTROL, reg);
+}
+
+static int dpi_queue_init(struct dpipf *dpi, struct dpipf_vf *dpivf, u8 vf)
+{
+	u16 sso_pf_func = dpivf->vf_config.sso_pf_func;
+	u16 npa_pf_func = dpivf->vf_config.npa_pf_func;
+	u16 csize = dpivf->vf_config.csize;
+	u32 aura = dpivf->vf_config.aura;
+	unsigned long timeout;
+	u64 reg;
+
+	dpi_reg_write(dpi, DPI_DMAX_QRST(vf), DPI_DMA_QRST);
+
+	/* Wait for a maximum of 3 sec */
+	timeout = jiffies + msecs_to_jiffies(3000);
+	while (!time_after(jiffies, timeout)) {
+		reg = dpi_reg_read(dpi, DPI_DMAX_QRST(vf));
+		if (!(reg & DPI_DMA_QRST))
+			break;
+
+		usleep_range(500, 1000);
+	}
+
+	if (reg & DPI_DMA_QRST) {
+		dev_err(&dpi->pdev->dev, "Queue reset failed\n");
+		return -EBUSY;
+	}
+
+	dpi_reg_write(dpi, DPI_DMAX_IDS2(vf), 0);
+	dpi_reg_write(dpi, DPI_DMAX_IDS(vf), 0);
+
+	reg = DPI_DMA_IBUFF_CSIZE_CSIZE(csize) | DPI_DMA_IBUFF_CSIZE_NPA_FREE;
+	dpi_reg_write(dpi, DPI_DMAX_IBUFF_CSIZE(vf), reg);
+
+	reg = dpi_reg_read(dpi, DPI_DMAX_IDS2(vf));
+	reg |= DPI_DMA_IDS2_INST_AURA(aura);
+	dpi_reg_write(dpi, DPI_DMAX_IDS2(vf), reg);
+
+	reg = dpi_reg_read(dpi, DPI_DMAX_IDS(vf));
+	reg |= DPI_DMA_IDS_DMA_NPA_PF_FUNC(npa_pf_func);
+	reg |= DPI_DMA_IDS_DMA_SSO_PF_FUNC(sso_pf_func);
+	reg |= DPI_DMA_IDS_DMA_STRM(vf + 1);
+	reg |= DPI_DMA_IDS_INST_STRM(vf + 1);
+	dpi_reg_write(dpi, DPI_DMAX_IDS(vf), reg);
+
+	return 0;
+}
+
+static void dpi_queue_fini(struct dpipf *dpi, struct dpipf_vf *dpivf, u8 vf)
+{
+	dpi_reg_write(dpi, DPI_DMAX_QRST(vf), DPI_DMA_QRST);
+
+	/* Reset IDS and IDS2 registers */
+	dpi_reg_write(dpi, DPI_DMAX_IDS2(vf), 0);
+	dpi_reg_write(dpi, DPI_DMAX_IDS(vf), 0);
+}
+
+static void dpi_poll_pfvf_mbox(struct dpipf *dpi)
+{
+	u64 reg;
+	u32 vf;
+
+	reg = dpi_reg_read(dpi, DPI_MBOX_VF_PF_INT);
+	if (reg) {
+		for (vf = 0; vf < pci_num_vf(dpi->pdev); vf++) {
+			if (reg & BIT_ULL(vf))
+				schedule_work(&dpi->mbox[vf]->work);
+		}
+		dpi_reg_write(dpi, DPI_MBOX_VF_PF_INT, reg);
+	}
+}
+
+static irqreturn_t dpi_mbox_intr_handler(int irq, void *data)
+{
+	struct dpipf *dpi = data;
+
+	dpi_poll_pfvf_mbox(dpi);
+
+	return IRQ_HANDLED;
+}
+
+static int queue_config(struct dpipf *dpi, struct dpipf_vf *dpivf, union dpi_mbox_message_t *msg)
+{
+	int ret = 0;
+
+	switch (msg->s.cmd) {
+	case DPI_QUEUE_OPEN:
+	case DPI_QUEUE_OPEN_V2:
+		dpivf->vf_config.aura = msg->s.aura;
+		dpivf->vf_config.csize = msg->s.cmd == DPI_QUEUE_OPEN ? msg->s.csize / 8 :
+					 msg->s.csize;
+		dpivf->vf_config.sso_pf_func = msg->s.sso_pf_func;
+		dpivf->vf_config.npa_pf_func = msg->s.npa_pf_func;
+		ret = dpi_queue_init(dpi, dpivf, msg->s.vfid);
+		if (!ret) {
+			if (msg->s.wqecs)
+				dpi_wqe_cs_offset(dpi, msg->s.wqecsoff);
+			dpivf->setup_done = true;
+		}
+		break;
+	case DPI_QUEUE_CLOSE:
+		dpivf->vf_config.aura = 0;
+		dpivf->vf_config.csize = 0;
+		dpivf->vf_config.sso_pf_func = 0;
+		dpivf->vf_config.npa_pf_func = 0;
+		dpi_queue_fini(dpi, dpivf, msg->s.vfid);
+		dpivf->setup_done = false;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static void dpi_pfvf_mbox_work(struct work_struct *work)
+{
+	struct dpi_mbox *mbox = container_of(work, struct dpi_mbox, work);
+	union dpi_mbox_message_t msg = { 0 };
+	struct dpipf_vf *dpivf;
+	struct dpipf *dpi;
+	int ret;
+
+	dpi = mbox->pf;
+
+	mutex_lock(&mbox->lock);
+	msg.u[0] = readq(mbox->vf_pf_data_reg);
+	if (unlikely(msg.u[0] == (u64)-1))
+		goto exit;
+
+	if (unlikely(msg.s.vfid >= pci_num_vf(dpi->pdev))) {
+		dev_err(&dpi->pdev->dev, "Invalid vfid:%d\n", msg.s.vfid);
+		goto exit;
+	}
+
+	dpivf = &dpi->vf[msg.s.vfid];
+	msg.u[1] = readq(mbox->pf_vf_data_reg);
+
+	ret = queue_config(dpi, dpivf, &msg);
+	if (ret < 0)
+		writeq(DPI_MBOX_TYPE_RSP_NACK, mbox->pf_vf_data_reg);
+	else
+		writeq(DPI_MBOX_TYPE_RSP_ACK, mbox->pf_vf_data_reg);
+exit:
+	mutex_unlock(&mbox->lock);
+}
+
+/* Setup registers for a PF mailbox */
+static void dpi_setup_mbox_regs(struct dpipf *dpi, int vf)
+{
+	struct dpi_mbox *mbox = dpi->mbox[vf];
+
+	mbox->pf_vf_data_reg = dpi->reg_base + DPI_MBOX_PF_VF_DATA0(vf);
+	mbox->vf_pf_data_reg = dpi->reg_base + DPI_MBOX_PF_VF_DATA1(vf);
+}
+
+static int dpi_pfvf_mbox_setup(struct dpipf *dpi)
+{
+	int vf;
+
+	for (vf = 0; vf < DPI_MAX_VFS; vf++) {
+		dpi->mbox[vf] = devm_kzalloc(&dpi->pdev->dev, sizeof(*dpi->mbox[vf]), GFP_KERNEL);
+
+		if (!dpi->mbox[vf])
+			return -ENOMEM;
+
+		mutex_init(&dpi->mbox[vf]->lock);
+		INIT_WORK(&dpi->mbox[vf]->work, dpi_pfvf_mbox_work);
+		dpi->mbox[vf]->pf = dpi;
+		dpi_setup_mbox_regs(dpi, vf);
+	}
+
+	return 0;
+}
+
+static void dpi_pfvf_mbox_destroy(struct dpipf *dpi)
+{
+	unsigned int vf;
+
+	for (vf = 0; vf < DPI_MAX_VFS; vf++) {
+		if (work_pending(&dpi->mbox[vf]->work))
+			cancel_work_sync(&dpi->mbox[vf]->work);
+
+		dpi->mbox[vf] = NULL;
+	}
+}
+
+static void dpi_init(struct dpipf *dpi)
+{
+	unsigned int engine, port;
+	u8 mrrs_val, mps_val;
+	u64 reg;
+
+	for (engine = 0; engine < DPI_MAX_ENGINES; engine++) {
+		if (engine == 4 || engine == 5)
+			reg = DPI_ENG_BUF_BLKS(16);
+		else
+			reg = DPI_ENG_BUF_BLKS(8);
+
+		dpi_reg_write(dpi, DPI_ENGX_BUF(engine), reg);
+	}
+
+	reg = DPI_DMA_CONTROL_ZBWCSEN | DPI_DMA_CONTROL_PKT_EN | DPI_DMA_CONTROL_LDWB |
+	      DPI_DMA_CONTROL_O_MODE | DPI_DMA_CONTROL_DMA_ENB;
+
+	dpi_reg_write(dpi, DPI_DMA_CONTROL, reg);
+	dpi_reg_write(dpi, DPI_CTL, DPI_CTL_EN);
+
+	mrrs_val = 2; /* 512B */
+	mps_val = 1; /* 256B */
+
+	for (port = 0; port < DPI_EBUS_MAX_PORTS; port++) {
+		reg = dpi_reg_read(dpi, DPI_EBUS_PORTX_CFG(port));
+		reg &= ~(DPI_EBUS_PORTX_CFG_MRRS(7) | DPI_EBUS_PORTX_CFG_MPS(7));
+		reg |= DPI_EBUS_PORTX_CFG_MPS(mps_val) | DPI_EBUS_PORTX_CFG_MRRS(mrrs_val);
+		dpi_reg_write(dpi, DPI_EBUS_PORTX_CFG(port), reg);
+	}
+
+	dpi_reg_write(dpi, DPI_WCTL_FIF_THR, DPI_WCTL_FIFO_THRESHOLD);
+}
+
+static void dpi_fini(struct dpipf *dpi)
+{
+	unsigned int engine;
+
+	for (engine = 0; engine < DPI_MAX_ENGINES; engine++)
+		dpi_reg_write(dpi, DPI_ENGX_BUF(engine), 0);
+
+	dpi_reg_write(dpi, DPI_DMA_CONTROL, 0);
+	dpi_reg_write(dpi, DPI_CTL, 0);
+}
+
+static void dpi_free_irq_vectors(void *pdev)
+{
+	pci_free_irq_vectors((struct pci_dev *)pdev);
+}
+
+static int dpi_irq_init(struct dpipf *dpi)
+{
+	struct pci_dev *pdev = dpi->pdev;
+	struct device *dev = &pdev->dev;
+	int i, ret;
+
+	/* Clear all RAS interrupts */
+	dpi_reg_write(dpi, DPI_PF_RAS, DPI_PF_RAS_INT);
+
+	/* Clear all RAS interrupt enable bits */
+	dpi_reg_write(dpi, DPI_PF_RAS_ENA_W1C, DPI_PF_RAS_INT);
+
+	for (i = 0; i < DPI_MAX_REQQ_INT; i++) {
+		dpi_reg_write(dpi, DPI_REQQX_INT(i), DPI_REQQ_INT);
+		dpi_reg_write(dpi, DPI_REQQX_INT_ENA_W1C(i), DPI_REQQ_INT);
+	}
+
+	for (i = 0; i < DPI_MAX_CC_INT; i++) {
+		dpi_reg_write(dpi, DPI_DMA_CCX_INT(i), DPI_DMA_CC_INT);
+		dpi_reg_write(dpi, DPI_DMA_CCX_INT_ENA_W1C(i), DPI_DMA_CC_INT);
+	}
+
+	ret = pci_alloc_irq_vectors(pdev, DPI_MAX_IRQS, DPI_MAX_IRQS, PCI_IRQ_MSIX);
+	if (ret != DPI_MAX_IRQS) {
+		dev_err(dev, "DPI: Failed to alloc %d msix irqs\n", DPI_MAX_IRQS);
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(dev, dpi_free_irq_vectors, pdev);
+	if (ret) {
+		dev_err(dev, "DPI: Failed to add irq free action\n");
+		return ret;
+	}
+
+	ret = devm_request_irq(dev, pci_irq_vector(pdev, DPI_MBOX_PF_VF_INT_IDX),
+			       dpi_mbox_intr_handler, 0, "dpi-mbox", dpi);
+	if (ret) {
+		dev_err(dev, "DPI: request_irq failed for mbox; err=%d\n", ret);
+		return ret;
+	}
+
+	dpi_reg_write(dpi, DPI_MBOX_VF_PF_INT_ENA_W1S, GENMASK_ULL(31, 0));
+
+	return 0;
+}
+
+static int dpi_mps_mrrs_config(struct dpipf *dpi, void __user *arg)
+{
+	struct dpi_mps_mrrs_cfg cfg;
+	u8 mrrs_val, mps_val;
+	u64 reg;
+
+	if (copy_from_user(&cfg, arg, sizeof(struct dpi_mps_mrrs_cfg)))
+		return -EFAULT;
+
+	if (cfg.max_read_req_sz < DPI_EBUS_MRRS_MIN || cfg.max_read_req_sz > DPI_EBUS_MRRS_MAX ||
+	    !is_power_of_2(cfg.max_read_req_sz)) {
+		dev_err(&dpi->pdev->dev, "Invalid MRRS size:%u\n", cfg.max_read_req_sz);
+		return -EINVAL;
+	}
+
+	if (cfg.max_payload_sz < DPI_EBUS_MPS_MIN || cfg.max_payload_sz > DPI_EBUS_MPS_MAX ||
+	    !is_power_of_2(cfg.max_payload_sz)) {
+		dev_err(&dpi->pdev->dev, "Invalid MPS size:%u\n", cfg.max_payload_sz);
+		return -EINVAL;
+	}
+
+	if (cfg.port >= DPI_EBUS_MAX_PORTS) {
+		dev_err(&dpi->pdev->dev, "Invalid EBUS port:%u\n", cfg.port);
+		return -EINVAL;
+	}
+
+	mrrs_val = fls(cfg.max_read_req_sz >> 8);
+	mps_val = fls(cfg.max_payload_sz >> 8);
+
+	reg = dpi_reg_read(dpi, DPI_EBUS_PORTX_CFG(cfg.port));
+	reg &= ~(DPI_EBUS_PORTX_CFG_MRRS(0x7) | DPI_EBUS_PORTX_CFG_MPS(0x7));
+	reg |= DPI_EBUS_PORTX_CFG_MPS(mps_val) | DPI_EBUS_PORTX_CFG_MRRS(mrrs_val);
+	dpi_reg_write(dpi, DPI_EBUS_PORTX_CFG(cfg.port), reg);
+
+	return 0;
+}
+
+static int dpi_engine_config(struct dpipf *dpi, void __user *arg)
+{
+	struct dpi_engine_cfg cfg;
+	unsigned int engine;
+	u8 *eng_buf;
+	u64 reg;
+
+	if (copy_from_user(&cfg, arg, sizeof(struct dpi_engine_cfg)))
+		return -EFAULT;
+
+	eng_buf = (u8 *)&cfg.fifo_mask;
+
+	for (engine = 0; engine < DPI_MAX_ENGINES; engine++) {
+		reg = DPI_ENG_BUF_BLKS(eng_buf[engine & DPI_ENGINE_MASK]);
+		dpi_reg_write(dpi, DPI_ENGX_BUF(engine), reg);
+
+		if (cfg.update_molr) {
+			reg = DPI_DMA_ENG_EN_MOLR(cfg.molr[engine & DPI_ENGINE_MASK]);
+			dpi_reg_write(dpi, DPI_DMA_ENGX_EN(engine), reg);
+		}
+	}
+
+	return 0;
+}
+
+static long dpi_dev_ioctl(struct file *fptr, unsigned int cmd, unsigned long data)
+{
+	void __user *arg = (void __user *)data;
+	struct dpipf *dpi;
+	int ret = -EINVAL;
+
+	dpi = container_of(fptr->private_data, struct dpipf, miscdev);
+
+	switch (cmd) {
+	case DPI_MPS_MRRS_CFG:
+		ret = dpi_mps_mrrs_config(dpi, arg);
+		break;
+	case DPI_ENGINE_CFG:
+		ret = dpi_engine_config(dpi, arg);
+		break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+static const struct file_operations dpi_device_fops = {
+	.owner = THIS_MODULE,
+	.unlocked_ioctl = dpi_dev_ioctl,
+	.compat_ioctl = compat_ptr_ioctl,
+};
+
+static int dpi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	struct device *dev = &pdev->dev;
+	struct dpipf *dpi;
+	int ret;
+
+	dpi = devm_kzalloc(dev, sizeof(*dpi), GFP_KERNEL);
+	if (!dpi)
+		return -ENOMEM;
+
+	dpi->pdev = pdev;
+
+	ret = pcim_enable_device(pdev);
+	if (ret) {
+		dev_err(dev, "DPI: Failed to enable PCI device\n");
+		return ret;
+	}
+
+	ret = pcim_iomap_regions(pdev, BIT(0) | BIT(4), DPI_DRV_NAME);
+	if (ret) {
+		dev_err(dev, "DPI: Failed to request MMIO region\n");
+		return ret;
+	}
+
+	dpi->reg_base = pcim_iomap_table(pdev)[PCI_DPI_CFG_BAR];
+
+	/* Initialize global PF registers */
+	dpi_init(dpi);
+
+	/* Setup PF-VF mailbox */
+	ret = dpi_pfvf_mbox_setup(dpi);
+	if (ret) {
+		dev_err(dev, "DPI: Failed to setup pf-vf mbox\n");
+		goto err_dpi_fini;
+	}
+
+	/* Register interrupts */
+	ret = dpi_irq_init(dpi);
+	if (ret) {
+		dev_err(dev, "DPI: Failed to initialize irq vectors\n");
+		goto err_dpi_mbox_free;
+	}
+
+	pci_set_drvdata(pdev, dpi);
+	dpi->miscdev.minor = MISC_DYNAMIC_MINOR;
+	dpi->miscdev.name = DPI_DRV_NAME;
+	dpi->miscdev.fops = &dpi_device_fops;
+	dpi->miscdev.parent = dev;
+
+	ret = misc_register(&dpi->miscdev);
+	if (ret) {
+		dev_err(dev, "DPI: Failed to register misc device\n");
+		goto err_dpi_mbox_free;
+	}
+
+	return 0;
+
+err_dpi_mbox_free:
+	dpi_pfvf_mbox_destroy(dpi);
+err_dpi_fini:
+	dpi_fini(dpi);
+	return ret;
+}
+
+static void dpi_remove(struct pci_dev *pdev)
+{
+	struct dpipf *dpi = pci_get_drvdata(pdev);
+
+	misc_deregister(&dpi->miscdev);
+	pci_sriov_configure_simple(pdev, 0);
+	dpi_pfvf_mbox_destroy(dpi);
+	dpi_fini(dpi);
+	pci_set_drvdata(pdev, NULL);
+}
+
+static const struct pci_device_id dpi_id_table[] = {
+	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_CAVIUM, PCI_DEVID_MRVL_CN10K_DPI_PF,
+			 PCI_VENDOR_ID_CAVIUM, PCI_SUBDEVID_MRVL_CN10K_DPI_PF) },
+	{ 0, }  /* end of table */
+};
+
+static struct pci_driver dpi_driver = {
+	.name = DPI_DRV_NAME,
+	.id_table = dpi_id_table,
+	.probe = dpi_probe,
+	.remove = dpi_remove,
+	.sriov_configure = pci_sriov_configure_simple,
+};
+
+module_pci_driver(dpi_driver);
+MODULE_DEVICE_TABLE(pci, dpi_id_table);
+MODULE_AUTHOR("Marvell.");
+MODULE_DESCRIPTION("Marvell Octeon CN10K DPI Driver");
+MODULE_LICENSE("GPL");
diff --git a/include/uapi/misc/mrvl_cn10k_dpi.h b/include/uapi/misc/mrvl_cn10k_dpi.h
new file mode 100644
index 000000000000..a1951644448a
--- /dev/null
+++ b/include/uapi/misc/mrvl_cn10k_dpi.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ * Marvell Octeon CN10K DPI driver
+ *
+ * Copyright (C) 2024 Marvell.
+ *
+ */
+
+#ifndef __MRVL_CN10K_DPI_H__
+#define __MRVL_CN10K_DPI_H__
+
+#include <linux/types.h>
+
+#define DPI_MAX_ENGINES 6
+
+struct dpi_mps_mrrs_cfg {
+	__u16 max_read_req_sz; /* Max read request size */
+	__u16 max_payload_sz;  /* Max payload size */
+	__u8 port; /* Ebus port */
+};
+
+struct dpi_engine_cfg {
+	__u64 fifo_mask; /* FIFO size mask in KBytes */
+	__u16 molr[DPI_MAX_ENGINES]; /* Max outstanding load requests */
+	__u8 update_molr; /* '1' to update engine MOLR */
+};
+
+/* DPI ioctl numbers */
+#define DPI_MAGIC_NUM	0xB8
+
+/* Set MPS & MRRS parameters */
+#define DPI_MPS_MRRS_CFG _IOW(DPI_MAGIC_NUM, 1, struct dpi_mps_mrrs_cfg)
+
+/* Set Engine FIFO configuration */
+#define DPI_ENGINE_CFG   _IOW(DPI_MAGIC_NUM, 2, struct dpi_engine_cfg)
+
+#endif /* __MRVL_CN10K_DPI_H__ */
-- 
2.25.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ