[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAA8EJporZFsjagW5CU5AwtqDsEXTtGJmRmLRedyBTZa7249p6w@mail.gmail.com>
Date: Fri, 26 Apr 2024 12:35:48 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Ajit Pandey <quic_ajipan@...cinc.com>
Cc: Michael Turquette <mturquette@...libre.com>, Stephen Boyd <sboyd@...nel.org>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>, Vinod Koul <vkoul@...nel.org>,
Vladimir Zapolskiy <vladimir.zapolskiy@...aro.org>, linux-arm-msm@...r.kernel.org,
linux-clk@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Taniya Das <quic_tdas@...cinc.com>,
Jagadeesh Kona <quic_jkona@...cinc.com>, Imran Shaik <quic_imrashai@...cinc.com>,
Satya Priya Kakitapalli <quic_skakitap@...cinc.com>
Subject: Re: [PATCH V2 7/8] clk: qcom: Add GPUCC driver support for SM4450
On Fri, 26 Apr 2024 at 12:20, Ajit Pandey <quic_ajipan@...cinc.com> wrote:
>
>
>
> On 4/17/2024 11:35 AM, Dmitry Baryshkov wrote:
> > On Tue, 16 Apr 2024 at 21:23, Ajit Pandey <quic_ajipan@...cinc.com> wrote:
> >>
> >> Add Graphics Clock Controller (GPUCC) support for SM4450 platform.
> >>
> >> Signed-off-by: Ajit Pandey <quic_ajipan@...cinc.com>
> >> ---
> >> drivers/clk/qcom/Kconfig | 9 +
> >> drivers/clk/qcom/Makefile | 1 +
> >> drivers/clk/qcom/gpucc-sm4450.c | 805 ++++++++++++++++++++++++++++++++
> >> 3 files changed, 815 insertions(+)
> >> create mode 100644 drivers/clk/qcom/gpucc-sm4450.c
> >
> > [skipped]
> >
> >> +
> >> +static int gpu_cc_sm4450_probe(struct platform_device *pdev)
> >> +{
> >> + struct regmap *regmap;
> >> +
> >> + regmap = qcom_cc_map(pdev, &gpu_cc_sm4450_desc);
> >> + if (IS_ERR(regmap))
> >> + return PTR_ERR(regmap);
> >> +
> >> + clk_lucid_evo_pll_configure(&gpu_cc_pll0, regmap, &gpu_cc_pll0_config);
> >> + clk_lucid_evo_pll_configure(&gpu_cc_pll1, regmap, &gpu_cc_pll1_config);
> >> +
> >> + /* Keep some clocks always enabled */
> >> + qcom_branch_set_clk_en(regmap, 0x93a4); /* GPU_CC_CB_CLK */
> >> + qcom_branch_set_clk_en(regmap, 0x9004); /* GPU_CC_CXO_AON_CLK */
> >> + qcom_branch_set_clk_en(regmap, 0x900c); /* GPU_CC_DEMET_CLK */
> >
> > My main concern here is the AON clocks. If we don't model
> > gpu_cc_demet_clk as a leaf clock, then gpu_cc_demet_div_clk_src
> > becomes a clock without children and can be disabled by Linux.
> > Likewise not modelling gpu_cc_cxo_aon_clk removes one of the voters on
> > gpu_cc_xo_clk_src, which can now be turned off by Linux.
> > Our usual recommendation is to model such clocks properly and to use
> > CLK_IS_CRITICAL or CLK_IGNORE_UNUSED to mark then as aon.
> >
> Thanks for review, actually if leaf (branch) clock is ON, hardware will
> take care of enabling and keeping the parent ON. So parent clocks won't
> get turned OFF in HW as long as branch clock is enabled.
>
> For clocks which are fixed rate (19.2MHz) and recommended to be kept ON
> forever from HW design, modelling and exposing clock structure in kernel
> will be a redundant code in kernel memory, hence as per earlier
> suggestion in previous thread such clocks are recommended to be kept
> enabled from probe.
Recommended by whom?
Kernel developers clearly recommend describing all the clocks so that
CCF has knowledge about all the clocks in the system.
> >> +
> >> + return qcom_cc_really_probe(pdev, &gpu_cc_sm4450_desc, regmap);
> >> +}
> >> +
> >> +static struct platform_driver gpu_cc_sm4450_driver = {
> >> + .probe = gpu_cc_sm4450_probe,
> >> + .driver = {
> >> + .name = "gpucc-sm4450",
> >> + .of_match_table = gpu_cc_sm4450_match_table,
> >> + },
> >> +};
> >> +
> >> +module_platform_driver(gpu_cc_sm4450_driver);
> >> +
> >> +MODULE_DESCRIPTION("QTI GPUCC SM4450 Driver");
> >> +MODULE_LICENSE("GPL");
> >> --
> >> 2.25.1
> >>
> >>
> >
> >
>
> --
> Thanks, and Regards
> Ajit
--
With best wishes
Dmitry
Powered by blists - more mailing lists