| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <f9d8ee034528720f24f5ef130f2e0bdb3cdcaf0a.1714101547.git.unicorn_wang@outlook.com>
Date: Fri, 26 Apr 2024 11:35:25 +0800
From: Chen Wang <unicornxw@...il.com>
To: aou@...s.berkeley.edu,
chao.wei@...hgo.com,
conor@...nel.org,
krzysztof.kozlowski+dt@...aro.org,
mturquette@...libre.com,
palmer@...belt.com,
paul.walmsley@...ive.com,
richardcochran@...il.com,
robh+dt@...nel.org,
sboyd@...nel.org,
devicetree@...r.kernel.org,
linux-clk@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-riscv@...ts.infradead.org,
haijiao.liu@...hgo.com,
xiaoguang.xing@...hgo.com,
guoren@...nel.org,
jszhang@...nel.org,
inochiama@...look.com,
samuel.holland@...ive.com
Cc: Chen Wang <unicorn_wang@...look.com>
Subject: [PATCH v15 4/5] clk: sophgo: Add SG2042 clock driver
From: Chen Wang <unicorn_wang@...look.com>
Add a driver for the SOPHGO SG2042 clocks.
Signed-off-by: Chen Wang <unicorn_wang@...look.com>
---
drivers/clk/Kconfig | 1 +
drivers/clk/Makefile | 1 +
drivers/clk/sophgo/Kconfig | 8 +
drivers/clk/sophgo/Makefile | 2 +
drivers/clk/sophgo/clk-sophgo-sg2042.c | 1870 ++++++++++++++++++++++++
5 files changed, 1882 insertions(+)
create mode 100644 drivers/clk/sophgo/Kconfig
create mode 100644 drivers/clk/sophgo/Makefile
create mode 100644 drivers/clk/sophgo/clk-sophgo-sg2042.c
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 50af5fc7f570..bc28502ec3c9 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -489,6 +489,7 @@ source "drivers/clk/rockchip/Kconfig"
source "drivers/clk/samsung/Kconfig"
source "drivers/clk/sifive/Kconfig"
source "drivers/clk/socfpga/Kconfig"
+source "drivers/clk/sophgo/Kconfig"
source "drivers/clk/sprd/Kconfig"
source "drivers/clk/starfive/Kconfig"
source "drivers/clk/sunxi/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 14fa8d4ecc1f..4abe16c8ccdf 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -118,6 +118,7 @@ obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/
obj-$(CONFIG_COMMON_CLK_SAMSUNG) += samsung/
obj-$(CONFIG_CLK_SIFIVE) += sifive/
obj-y += socfpga/
+obj-y += sophgo/
obj-$(CONFIG_PLAT_SPEAR) += spear/
obj-y += sprd/
obj-$(CONFIG_ARCH_STI) += st/
diff --git a/drivers/clk/sophgo/Kconfig b/drivers/clk/sophgo/Kconfig
new file mode 100644
index 000000000000..82516adb0f97
--- /dev/null
+++ b/drivers/clk/sophgo/Kconfig
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+# common clock support for SOPHGO SoC family.
+
+config CLK_SOPHGO_SG2042
+ bool "Sophgo SG2042 clock support"
+ depends on ARCH_SOPHGO || COMPILE_TEST
+ help
+ Say yes here to support the clock controller on the Sophgo SG2042 SoC.
diff --git a/drivers/clk/sophgo/Makefile b/drivers/clk/sophgo/Makefile
new file mode 100644
index 000000000000..13834cce260c
--- /dev/null
+++ b/drivers/clk/sophgo/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_CLK_SOPHGO_SG2042) += clk-sophgo-sg2042.o
diff --git a/drivers/clk/sophgo/clk-sophgo-sg2042.c b/drivers/clk/sophgo/clk-sophgo-sg2042.c
new file mode 100644
index 000000000000..e64e1cb4872b
--- /dev/null
+++ b/drivers/clk/sophgo/clk-sophgo-sg2042.c
@@ -0,0 +1,1870 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Sophgo SG2042 Clock Generator Driver
+ *
+ * Copyright (C) 2024 Sophgo Technology Inc. All rights reserved.
+ */
+
+#include <linux/array_size.h>
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/platform_device.h>
+#include <asm/div64.h>
+
+/*
+ * The clock of SG2042 is composed of three parts.
+ * The registers of these three parts of the clock are scattered in three
+ * different memory address spaces:
+ * - pll clocks
+ * - gate clocks for RP subsystem
+ * - div/mux, and gate clocks working for other subsystem than RP subsystem
+ */
+#include <dt-bindings/clock/sophgo,sg2042-pll.h>
+#include <dt-bindings/clock/sophgo,sg2042-rpgate.h>
+#include <dt-bindings/clock/sophgo,sg2042-clkgen.h>
+
+/* Registers defined in SYS_CTRL */
+#define R_PLL_BEGIN 0xC0
+#define R_PLL_STAT (0xC0 - R_PLL_BEGIN)
+#define R_PLL_CLKEN_CONTROL (0xC4 - R_PLL_BEGIN)
+#define R_MPLL_CONTROL (0xE8 - R_PLL_BEGIN)
+#define R_FPLL_CONTROL (0xF4 - R_PLL_BEGIN)
+#define R_DPLL0_CONTROL (0xF8 - R_PLL_BEGIN)
+#define R_DPLL1_CONTROL (0xFC - R_PLL_BEGIN)
+
+#define R_SYSGATE_BEGIN 0x0368
+#define R_RP_RXU_CLK_ENABLE (0x0368 - R_SYSGATE_BEGIN)
+#define R_MP0_STATUS_REG (0x0380 - R_SYSGATE_BEGIN)
+#define R_MP0_CONTROL_REG (0x0384 - R_SYSGATE_BEGIN)
+#define R_MP1_STATUS_REG (0x0388 - R_SYSGATE_BEGIN)
+#define R_MP1_CONTROL_REG (0x038C - R_SYSGATE_BEGIN)
+#define R_MP2_STATUS_REG (0x0390 - R_SYSGATE_BEGIN)
+#define R_MP2_CONTROL_REG (0x0394 - R_SYSGATE_BEGIN)
+#define R_MP3_STATUS_REG (0x0398 - R_SYSGATE_BEGIN)
+#define R_MP3_CONTROL_REG (0x039C - R_SYSGATE_BEGIN)
+#define R_MP4_STATUS_REG (0x03A0 - R_SYSGATE_BEGIN)
+#define R_MP4_CONTROL_REG (0x03A4 - R_SYSGATE_BEGIN)
+#define R_MP5_STATUS_REG (0x03A8 - R_SYSGATE_BEGIN)
+#define R_MP5_CONTROL_REG (0x03AC - R_SYSGATE_BEGIN)
+#define R_MP6_STATUS_REG (0x03B0 - R_SYSGATE_BEGIN)
+#define R_MP6_CONTROL_REG (0x03B4 - R_SYSGATE_BEGIN)
+#define R_MP7_STATUS_REG (0x03B8 - R_SYSGATE_BEGIN)
+#define R_MP7_CONTROL_REG (0x03BC - R_SYSGATE_BEGIN)
+#define R_MP8_STATUS_REG (0x03C0 - R_SYSGATE_BEGIN)
+#define R_MP8_CONTROL_REG (0x03C4 - R_SYSGATE_BEGIN)
+#define R_MP9_STATUS_REG (0x03C8 - R_SYSGATE_BEGIN)
+#define R_MP9_CONTROL_REG (0x03CC - R_SYSGATE_BEGIN)
+#define R_MP10_STATUS_REG (0x03D0 - R_SYSGATE_BEGIN)
+#define R_MP10_CONTROL_REG (0x03D4 - R_SYSGATE_BEGIN)
+#define R_MP11_STATUS_REG (0x03D8 - R_SYSGATE_BEGIN)
+#define R_MP11_CONTROL_REG (0x03DC - R_SYSGATE_BEGIN)
+#define R_MP12_STATUS_REG (0x03E0 - R_SYSGATE_BEGIN)
+#define R_MP12_CONTROL_REG (0x03E4 - R_SYSGATE_BEGIN)
+#define R_MP13_STATUS_REG (0x03E8 - R_SYSGATE_BEGIN)
+#define R_MP13_CONTROL_REG (0x03EC - R_SYSGATE_BEGIN)
+#define R_MP14_STATUS_REG (0x03F0 - R_SYSGATE_BEGIN)
+#define R_MP14_CONTROL_REG (0x03F4 - R_SYSGATE_BEGIN)
+#define R_MP15_STATUS_REG (0x03F8 - R_SYSGATE_BEGIN)
+#define R_MP15_CONTROL_REG (0x03FC - R_SYSGATE_BEGIN)
+
+/* Registers defined in CLOCK */
+#define R_CLKENREG0 0x00
+#define R_CLKENREG1 0x04
+#define R_CLKSELREG0 0x20
+#define R_CLKDIVREG0 0x40
+#define R_CLKDIVREG1 0x44
+#define R_CLKDIVREG2 0x48
+#define R_CLKDIVREG3 0x4C
+#define R_CLKDIVREG4 0x50
+#define R_CLKDIVREG5 0x54
+#define R_CLKDIVREG6 0x58
+#define R_CLKDIVREG7 0x5C
+#define R_CLKDIVREG8 0x60
+#define R_CLKDIVREG9 0x64
+#define R_CLKDIVREG10 0x68
+#define R_CLKDIVREG11 0x6C
+#define R_CLKDIVREG12 0x70
+#define R_CLKDIVREG13 0x74
+#define R_CLKDIVREG14 0x78
+#define R_CLKDIVREG15 0x7C
+#define R_CLKDIVREG16 0x80
+#define R_CLKDIVREG17 0x84
+#define R_CLKDIVREG18 0x88
+#define R_CLKDIVREG19 0x8C
+#define R_CLKDIVREG20 0x90
+#define R_CLKDIVREG21 0x94
+#define R_CLKDIVREG22 0x98
+#define R_CLKDIVREG23 0x9C
+#define R_CLKDIVREG24 0xA0
+#define R_CLKDIVREG25 0xA4
+#define R_CLKDIVREG26 0xA8
+#define R_CLKDIVREG27 0xAC
+#define R_CLKDIVREG28 0xB0
+#define R_CLKDIVREG29 0xB4
+#define R_CLKDIVREG30 0xB8
+
+/* All following shift value are the same for all DIV registers */
+#define SHIFT_DIV_RESET_CTRL 0
+#define SHIFT_DIV_FACTOR_SEL 3
+#define SHIFT_DIV_FACTOR 16
+
+/**
+ * struct sg2042_clk_data - Common data of clock-controller
+ * @iobase: base address of clock-controller
+ * @onecell_data: used for adding providers.
+ *
+ * Note: this structure will be used both by clkgen & sysclk.
+ */
+struct sg2042_clk_data {
+ void __iomem *iobase;
+ struct clk_hw_onecell_data onecell_data;
+};
+
+/**
+ * struct sg2042_pll_clock - PLL clock
+ * @hw: clk_hw for initialization
+ * @id: used to map clk_onecell_data
+ * @base: used for readl/writel.
+ * **NOTE**: PLL registers are all in SYS_CTRL!
+ * @lock: spinlock to protect register access, modification
+ * of frequency can only be served one at the time.
+ * @offset_status: offset of pll status registers
+ * @offset_enable: offset of pll enable registers
+ * @offset_ctrl: offset of pll control registers
+ * @shift_status_lock: shift of XXX_LOCK in pll status register
+ * @shift_status_updating: shift of UPDATING_XXX in pll status register
+ * @shift_enable: shift of XXX_CLK_EN in pll enable register
+ */
+struct sg2042_pll_clock {
+ struct clk_hw hw;
+
+ unsigned int id;
+ void __iomem *base;
+ /* protect register access */
+ spinlock_t *lock;
+
+ u32 offset_status;
+ u32 offset_enable;
+ u32 offset_ctrl;
+ u8 shift_status_lock;
+ u8 shift_status_updating;
+ u8 shift_enable;
+};
+
+#define to_sg2042_pll_clk(_hw) container_of(_hw, struct sg2042_pll_clock, hw)
+
+/**
+ * struct sg2042_divider_clock - Divider clock
+ * @hw: clk_hw for initialization
+ * @id: used to map clk_onecell_data
+ * @reg: used for readl/writel.
+ * **NOTE**: DIV registers are ALL in CLOCK!
+ * @lock: spinlock to protect register access, modification of
+ * frequency can only be served one at the time
+ * @offset_ctrl: offset of divider control registers
+ * @shift: shift of "Clock Divider Factor" in divider control register
+ * @width: width of "Clock Divider Factor" in divider control register
+ * @div_flags: private flags for this clock, not for framework-specific
+ * @initval: In the divider control register, we can configure whether
+ * to use the value of "Clock Divider Factor" or just use
+ * the initial value pre-configured by IC. BIT[3] controls
+ * this and by default (value is 0), means initial value
+ * is used.
+ * **NOTE** that we cannot read the initial value (default
+ * value when poweron) and default value of "Clock Divider
+ * Factor" is zero, which I think is a hardware design flaw
+ * and should be sync-ed with the initial value. So in
+ * software we have to add a configuration item (initval)
+ * to manually configure this value and use it when BIT[3]
+ * is zero.
+ */
+struct sg2042_divider_clock {
+ struct clk_hw hw;
+
+ unsigned int id;
+
+ void __iomem *reg;
+ /* protect register access */
+ spinlock_t *lock;
+
+ u32 offset_ctrl;
+ u8 shift;
+ u8 width;
+ u8 div_flags;
+ u32 initval;
+};
+
+#define to_sg2042_clk_divider(_hw) \
+ container_of(_hw, struct sg2042_divider_clock, hw)
+
+/**
+ * struct sg2042_gate_clock - Gate clock
+ * @hw: clk_hw for initialization
+ * @id: used to map clk_onecell_data
+ * @offset_enable: offset of gate enable registers
+ * @bit_idx: which bit in the register controls gating of this clock
+ */
+struct sg2042_gate_clock {
+ struct clk_hw hw;
+
+ unsigned int id;
+
+ u32 offset_enable;
+ u8 bit_idx;
+};
+
+/**
+ * struct sg2042_mux_clock - Mux clock
+ * @hw: clk_hw for initialization
+ * @id: used to map clk_onecell_data
+ * @offset_select: offset of mux selection registers
+ * **NOTE**: MUX registers are ALL in CLOCK!
+ * @shift: shift of "Clock Select" in mux selection register
+ * @width: width of "Clock Select" in mux selection register
+ * @clk_nb: used for notification
+ * @original_index: set by notifier callback
+ */
+struct sg2042_mux_clock {
+ struct clk_hw hw;
+
+ unsigned int id;
+
+ u32 offset_select;
+ u8 shift;
+ u8 width;
+
+ struct notifier_block clk_nb;
+ u8 original_index;
+};
+
+#define to_sg2042_mux_nb(_nb) container_of(_nb, struct sg2042_mux_clock, clk_nb)
+
+#define KHZ 1000UL
+#define MHZ (KHZ * KHZ)
+
+#define REFDIV_MIN 1
+#define REFDIV_MAX 63
+#define FBDIV_MIN 16
+#define FBDIV_MAX 320
+
+#define PLL_FREF_SG2042 (25 * MHZ)
+
+#define PLL_FOUTPOSTDIV_MIN (16 * MHZ)
+#define PLL_FOUTPOSTDIV_MAX (3200 * MHZ)
+
+#define PLL_FOUTVCO_MIN (800 * MHZ)
+#define PLL_FOUTVCO_MAX (3200 * MHZ)
+
+struct sg2042_pll_ctrl {
+ unsigned long freq;
+ unsigned int fbdiv;
+ unsigned int postdiv1;
+ unsigned int postdiv2;
+ unsigned int refdiv;
+};
+
+#define PLLCTRL_FBDIV_SHIFT 16
+#define PLLCTRL_FBDIV_MASK (GENMASK(27, 16) >> PLLCTRL_FBDIV_SHIFT)
+#define PLLCTRL_POSTDIV2_SHIFT 12
+#define PLLCTRL_POSTDIV2_MASK (GENMASK(14, 12) >> PLLCTRL_POSTDIV2_SHIFT)
+#define PLLCTRL_POSTDIV1_SHIFT 8
+#define PLLCTRL_POSTDIV1_MASK (GENMASK(10, 8) >> PLLCTRL_POSTDIV1_SHIFT)
+#define PLLCTRL_REFDIV_SHIFT 0
+#define PLLCTRL_REFDIV_MASK (GENMASK(5, 0) >> PLLCTRL_REFDIV_SHIFT)
+
+static inline u32 sg2042_pll_ctrl_encode(struct sg2042_pll_ctrl *ctrl)
+{
+ return ((ctrl->fbdiv & PLLCTRL_FBDIV_MASK) << PLLCTRL_FBDIV_SHIFT) |
+ ((ctrl->postdiv2 & PLLCTRL_POSTDIV2_MASK) << PLLCTRL_POSTDIV2_SHIFT) |
+ ((ctrl->postdiv1 & PLLCTRL_POSTDIV1_MASK) << PLLCTRL_POSTDIV1_SHIFT) |
+ ((ctrl->refdiv & PLLCTRL_REFDIV_MASK) << PLLCTRL_REFDIV_SHIFT);
+}
+
+static inline void sg2042_pll_ctrl_decode(unsigned int reg_value,
+ struct sg2042_pll_ctrl *ctrl)
+{
+ ctrl->fbdiv = (reg_value >> PLLCTRL_FBDIV_SHIFT) & PLLCTRL_FBDIV_MASK;
+ ctrl->refdiv = (reg_value >> PLLCTRL_REFDIV_SHIFT) & PLLCTRL_REFDIV_MASK;
+ ctrl->postdiv1 = (reg_value >> PLLCTRL_POSTDIV1_SHIFT) & PLLCTRL_POSTDIV1_MASK;
+ ctrl->postdiv2 = (reg_value >> PLLCTRL_POSTDIV2_SHIFT) & PLLCTRL_POSTDIV2_MASK;
+}
+
+static inline int sg2042_pll_enable(struct sg2042_pll_clock *pll, bool en)
+{
+ u32 value;
+
+ if (en) {
+ /* wait pll lock */
+ if (readl_poll_timeout_atomic(pll->base + pll->offset_status,
+ value,
+ ((value >> pll->shift_status_lock) & 0x1),
+ 0,
+ 100000))
+ pr_warn("%s not locked\n", pll->hw.init->name);
+
+ /* wait pll updating */
+ if (readl_poll_timeout_atomic(pll->base + pll->offset_status,
+ value,
+ !((value >> pll->shift_status_updating) & 0x1),
+ 0,
+ 100000))
+ pr_warn("%s still updating\n", pll->hw.init->name);
+
+ /* enable pll */
+ value = readl(pll->base + pll->offset_enable);
+ writel(value | (1 << pll->shift_enable), pll->base + pll->offset_enable);
+ } else {
+ /* disable pll */
+ value = readl(pll->base + pll->offset_enable);
+ writel(value & (~(1 << pll->shift_enable)), pll->base + pll->offset_enable);
+ }
+
+ return 0;
+}
+
+/**
+ * sg2042_pll_recalc_rate() - Calculate rate for plls
+ * @reg_value: current register value
+ * @parent_rate: parent frequency
+ *
+ * This function is used to calculate below "rate" in equation
+ * rate = (parent_rate/REFDIV) x FBDIV/POSTDIV1/POSTDIV2
+ * = (parent_rate x FBDIV) / (REFDIV x POSTDIV1 x POSTDIV2)
+ *
+ * Return: The rate calculated.
+ */
+static unsigned long sg2042_pll_recalc_rate(unsigned int reg_value,
+ unsigned long parent_rate)
+{
+ struct sg2042_pll_ctrl ctrl_table;
+ u64 numerator, denominator;
+
+ sg2042_pll_ctrl_decode(reg_value, &ctrl_table);
+
+ numerator = parent_rate * ctrl_table.fbdiv;
+ denominator = ctrl_table.refdiv * ctrl_table.postdiv1 * ctrl_table.postdiv2;
+ do_div(numerator, denominator);
+ return numerator;
+}
+
+/**
+ * sg2042_pll_get_postdiv_1_2() - Based on input rate/prate/fbdiv/refdiv,
+ * look up the postdiv1_2 table to get the closest postdiiv combination.
+ * @rate: FOUTPOSTDIV
+ * @prate: parent rate, i.e. FREF
+ * @fbdiv: FBDIV
+ * @refdiv: REFDIV
+ * @postdiv1: POSTDIV1, output
+ * @postdiv2: POSTDIV2, output
+ *
+ * postdiv1_2 contains all the possible combination lists of POSTDIV1 and POSTDIV2
+ * for example:
+ * postdiv1_2[0] = {2, 4, 8}, where div1 = 2, div2 = 4 , div1 * div2 = 8
+ *
+ * See TRM:
+ * FOUTPOSTDIV = FREF * FBDIV / REFDIV / (POSTDIV1 * POSTDIV2)
+ * So we get following formula to get POSTDIV1 and POSTDIV2:
+ * POSTDIV = (prate/REFDIV) x FBDIV/rate
+ * above POSTDIV = POSTDIV1*POSTDIV2
+ *
+ * Return:
+ * %0 - OK
+ * %-EINVAL - invalid argument, which means Failed to get the postdivs.
+ */
+static int sg2042_pll_get_postdiv_1_2(unsigned long rate,
+ unsigned long prate,
+ unsigned int fbdiv,
+ unsigned int refdiv,
+ unsigned int *postdiv1,
+ unsigned int *postdiv2)
+{
+ int index;
+ u64 tmp0;
+
+ /* POSTDIV_RESULT_INDEX point to 3rd element in the array postdiv1_2 */
+ #define POSTDIV_RESULT_INDEX 2
+
+ static const int postdiv1_2[][3] = {
+ {2, 4, 8}, {3, 3, 9}, {2, 5, 10}, {2, 6, 12},
+ {2, 7, 14}, {3, 5, 15}, {4, 4, 16}, {3, 6, 18},
+ {4, 5, 20}, {3, 7, 21}, {4, 6, 24}, {5, 5, 25},
+ {4, 7, 28}, {5, 6, 30}, {5, 7, 35}, {6, 6, 36},
+ {6, 7, 42}, {7, 7, 49}
+ };
+
+ /* prate/REFDIV and result save to tmp0 */
+ tmp0 = prate;
+ do_div(tmp0, refdiv);
+
+ /* ((prate/REFDIV) x FBDIV) and result save to tmp0 */
+ tmp0 *= fbdiv;
+
+ /* ((prate/REFDIV) x FBDIV)/rate and result save to tmp0 */
+ do_div(tmp0, rate);
+
+ /* tmp0 is POSTDIV1*POSTDIV2, now we calculate div1 and div2 value */
+ if (tmp0 <= 7) {
+ /* (div1 * div2) <= 7, no need to use array search */
+ *postdiv1 = tmp0;
+ *postdiv2 = 1;
+ return 0;
+ }
+
+ /* (div1 * div2) > 7, use array search */
+ for (index = 0; index < ARRAY_SIZE(postdiv1_2); index++) {
+ if (tmp0 > postdiv1_2[index][POSTDIV_RESULT_INDEX]) {
+ continue;
+ } else {
+ /* found it */
+ *postdiv1 = postdiv1_2[index][1];
+ *postdiv2 = postdiv1_2[index][0];
+ return 0;
+ }
+ }
+ pr_warn("%s can not find in postdiv array!\n", __func__);
+ return -EINVAL;
+}
+
+/**
+ * sg2042_get_pll_ctl_setting() - Based on the given FOUTPISTDIV and the input
+ * FREF to calculate the REFDIV/FBDIV/PSTDIV1/POSTDIV2 combination for pllctrl
+ * register.
+ * @req_rate: expected output clock rate, i.e. FOUTPISTDIV
+ * @parent_rate: input parent clock rate, i.e. FREF
+ * @best: output to hold calculated combination of REFDIV/FBDIV/PSTDIV1/POSTDIV2
+ *
+ * Return:
+ * %0 - OK
+ * %-EINVAL - invalid argument
+ */
+static int sg2042_get_pll_ctl_setting(struct sg2042_pll_ctrl *best,
+ unsigned long req_rate,
+ unsigned long parent_rate)
+{
+ int ret;
+ unsigned int fbdiv, refdiv, postdiv1, postdiv2;
+ unsigned long foutpostdiv;
+ u64 tmp;
+ u64 foutvco;
+
+ if (parent_rate != PLL_FREF_SG2042) {
+ pr_err("INVALID FREF: %ld\n", parent_rate);
+ return -EINVAL;
+ }
+
+ if (req_rate < PLL_FOUTPOSTDIV_MIN || req_rate > PLL_FOUTPOSTDIV_MAX) {
+ pr_alert("INVALID FOUTPOSTDIV: %ld\n", req_rate);
+ return -EINVAL;
+ }
+
+ memset(best, 0, sizeof(struct sg2042_pll_ctrl));
+
+ for (refdiv = REFDIV_MIN; refdiv < REFDIV_MAX + 1; refdiv++) {
+ /* required by hardware: FREF/REFDIV must > 10 */
+ tmp = parent_rate;
+ do_div(tmp, refdiv);
+ if (tmp <= 10)
+ continue;
+
+ for (fbdiv = FBDIV_MIN; fbdiv < FBDIV_MAX + 1; fbdiv++) {
+ /*
+ * FOUTVCO = FREF*FBDIV/REFDIV validation
+ * required by hardware, FOUTVCO must [800MHz, 3200MHz]
+ */
+ foutvco = parent_rate * fbdiv;
+ do_div(foutvco, refdiv);
+ if (foutvco < PLL_FOUTVCO_MIN || foutvco > PLL_FOUTVCO_MAX)
+ continue;
+
+ ret = sg2042_pll_get_postdiv_1_2(req_rate, parent_rate,
+ fbdiv, refdiv,
+ &postdiv1, &postdiv2);
+ if (ret)
+ continue;
+
+ /*
+ * FOUTPOSTDIV = FREF*FBDIV/REFDIV/(POSTDIV1*POSTDIV2)
+ * = FOUTVCO/(POSTDIV1*POSTDIV2)
+ */
+ tmp = foutvco;
+ do_div(tmp, (postdiv1 * postdiv2));
+ foutpostdiv = (unsigned long)tmp;
+ /* Iterative to approach the expected value */
+ if (abs_diff(foutpostdiv, req_rate) < abs_diff(best->freq, req_rate)) {
+ best->freq = foutpostdiv;
+ best->refdiv = refdiv;
+ best->fbdiv = fbdiv;
+ best->postdiv1 = postdiv1;
+ best->postdiv2 = postdiv2;
+ if (foutpostdiv == req_rate)
+ return 0;
+ }
+ continue;
+ }
+ }
+
+ if (best->freq == 0)
+ return -EINVAL;
+ else
+ return 0;
+}
+
+/**
+ * sg2042_clk_pll_recalc_rate() - recalc_rate callback for pll clks
+ * @hw: ccf use to hook get sg2042_pll_clock
+ * @parent_rate: parent rate
+ *
+ * The is function will be called through clk_get_rate
+ * and return current rate after decoding reg value
+ *
+ * Return: Current rate recalculated.
+ */
+static unsigned long sg2042_clk_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ u32 value;
+ unsigned long rate;
+ struct sg2042_pll_clock *pll = to_sg2042_pll_clk(hw);
+
+ value = readl(pll->base + pll->offset_ctrl);
+ rate = sg2042_pll_recalc_rate(value, parent_rate);
+
+ pr_debug("--> %s: pll_recalc_rate: val = %ld\n",
+ clk_hw_get_name(hw), rate);
+ return rate;
+}
+
+static long sg2042_clk_pll_round_rate(struct clk_hw *hw,
+ unsigned long req_rate,
+ unsigned long *prate)
+{
+ unsigned int value;
+ struct sg2042_pll_ctrl pctrl_table;
+ long proper_rate;
+ int ret;
+
+ ret = sg2042_get_pll_ctl_setting(&pctrl_table, req_rate, *prate);
+ if (ret) {
+ proper_rate = 0;
+ goto out;
+ }
+
+ value = sg2042_pll_ctrl_encode(&pctrl_table);
+ proper_rate = (long)sg2042_pll_recalc_rate(value, *prate);
+
+out:
+ pr_debug("--> %s: pll_round_rate: val = %ld\n",
+ clk_hw_get_name(hw), proper_rate);
+ return proper_rate;
+}
+
+static int sg2042_clk_pll_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ req->rate = sg2042_clk_pll_round_rate(hw, min(req->rate, req->max_rate),
+ &req->best_parent_rate);
+ pr_debug("--> %s: pll_determine_rate: val = %ld\n",
+ clk_hw_get_name(hw), req->rate);
+ return 0;
+}
+
+static int sg2042_clk_pll_set_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate)
+{
+ unsigned long flags;
+ u32 value;
+ int ret = 0;
+ struct sg2042_pll_ctrl pctrl_table;
+ struct sg2042_pll_clock *pll = to_sg2042_pll_clk(hw);
+
+ spin_lock_irqsave(pll->lock, flags);
+ if (sg2042_pll_enable(pll, 0)) {
+ pr_warn("Can't disable pll(%s), status error\n", pll->hw.init->name);
+ goto out;
+ }
+ ret = sg2042_get_pll_ctl_setting(&pctrl_table, rate, parent_rate);
+ if (ret) {
+ pr_warn("%s: Can't find a proper pll setting\n", pll->hw.init->name);
+ goto out2;
+ }
+
+ value = sg2042_pll_ctrl_encode(&pctrl_table);
+
+ /* write the value to top register */
+ writel(value, pll->base + pll->offset_ctrl);
+
+out2:
+ sg2042_pll_enable(pll, 1);
+out:
+ spin_unlock_irqrestore(pll->lock, flags);
+
+ pr_debug("--> %s: pll_set_rate: val = 0x%x\n",
+ clk_hw_get_name(hw), value);
+ return ret;
+}
+
+static const struct clk_ops sg2042_clk_pll_ops = {
+ .recalc_rate = sg2042_clk_pll_recalc_rate,
+ .round_rate = sg2042_clk_pll_round_rate,
+ .determine_rate = sg2042_clk_pll_determine_rate,
+ .set_rate = sg2042_clk_pll_set_rate,
+};
+
+static const struct clk_ops sg2042_clk_pll_ro_ops = {
+ .recalc_rate = sg2042_clk_pll_recalc_rate,
+ .round_rate = sg2042_clk_pll_round_rate,
+};
+
+static unsigned long sg2042_clk_divider_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct sg2042_divider_clock *divider = to_sg2042_clk_divider(hw);
+ u32 val;
+ unsigned long ret_rate;
+
+ if (!(readl(divider->reg) & BIT(SHIFT_DIV_FACTOR_SEL))) {
+ val = divider->initval;
+ } else {
+ val = readl(divider->reg) >> divider->shift;
+ val &= clk_div_mask(divider->width);
+ }
+
+ ret_rate = divider_recalc_rate(hw, parent_rate, val, NULL,
+ divider->div_flags, divider->width);
+
+ pr_debug("--> %s: divider_recalc_rate: ret_rate = %ld\n",
+ clk_hw_get_name(hw), ret_rate);
+ return ret_rate;
+}
+
+static long sg2042_clk_divider_round_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long *prate)
+{
+ u32 bestdiv;
+ unsigned long ret_rate;
+ struct sg2042_divider_clock *divider = to_sg2042_clk_divider(hw);
+
+ /* if read only, just return current value */
+ if (divider->div_flags & CLK_DIVIDER_READ_ONLY) {
+ if (!(readl(divider->reg) & BIT(SHIFT_DIV_FACTOR_SEL))) {
+ bestdiv = divider->initval;
+ } else {
+ bestdiv = readl(divider->reg) >> divider->shift;
+ bestdiv &= clk_div_mask(divider->width);
+ }
+ ret_rate = DIV_ROUND_UP_ULL((u64)*prate, bestdiv);
+ } else {
+ ret_rate = divider_round_rate(hw, rate, prate, NULL,
+ divider->width, divider->div_flags);
+ }
+
+ pr_debug("--> %s: divider_round_rate: val = %ld\n",
+ clk_hw_get_name(hw), ret_rate);
+ return ret_rate;
+}
+
+static int sg2042_clk_divider_set_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate)
+{
+ u32 value;
+ u32 val, val2;
+ unsigned long flags = 0;
+ struct sg2042_divider_clock *divider = to_sg2042_clk_divider(hw);
+
+ value = divider_get_val(rate, parent_rate, NULL,
+ divider->width, divider->div_flags);
+
+ if (divider->lock)
+ spin_lock_irqsave(divider->lock, flags);
+ else
+ __acquire(divider->lock);
+
+ /*
+ * The sequence of clock frequency modification is:
+ * Assert to reset divider.
+ * Modify the value of Clock Divide Factor (and High Wide if needed).
+ * De-assert to restore divided clock with new frequency.
+ */
+ val = readl(divider->reg);
+
+ /* assert */
+ val &= ~BIT(SHIFT_DIV_RESET_CTRL);
+ writel(val, divider->reg);
+
+ if (divider->div_flags & CLK_DIVIDER_HIWORD_MASK) {
+ val = clk_div_mask(divider->width) << (divider->shift + 16);
+ } else {
+ val = readl(divider->reg);
+ val &= ~(clk_div_mask(divider->width) << divider->shift);
+ }
+ val |= value << divider->shift;
+ val |= BIT(SHIFT_DIV_FACTOR_SEL);
+ writel(val, divider->reg);
+ val2 = val;
+
+ /* de-assert */
+ val |= BIT(SHIFT_DIV_RESET_CTRL);
+ writel(val, divider->reg);
+
+ if (divider->lock)
+ spin_unlock_irqrestore(divider->lock, flags);
+ else
+ __release(divider->lock);
+
+ pr_debug("--> %s: divider_set_rate: register val = 0x%x\n",
+ clk_hw_get_name(hw), val2);
+ return 0;
+}
+
+static const struct clk_ops sg2042_clk_divider_ops = {
+ .recalc_rate = sg2042_clk_divider_recalc_rate,
+ .round_rate = sg2042_clk_divider_round_rate,
+ .set_rate = sg2042_clk_divider_set_rate,
+};
+
+static const struct clk_ops sg2042_clk_divider_ro_ops = {
+ .recalc_rate = sg2042_clk_divider_recalc_rate,
+ .round_rate = sg2042_clk_divider_round_rate,
+};
+
+/*
+ * Clock initialization macro naming rules:
+ * FW: use CLK_HW_INIT_FW_NAME
+ * HW: use CLK_HW_INIT_HW
+ * HWS: use CLK_HW_INIT_HWS
+ * RO: means Read-Only
+ */
+#define SG2042_PLL_FW(_id, _name, _parent, _r_stat, _r_enable, _r_ctrl, _shift) \
+ { \
+ .hw.init = CLK_HW_INIT_FW_NAME( \
+ _name, \
+ _parent, \
+ &sg2042_clk_pll_ops, \
+ CLK_GET_RATE_NOCACHE | CLK_GET_ACCURACY_NOCACHE),\
+ .id = _id, \
+ .offset_ctrl = _r_ctrl, \
+ .offset_status = _r_stat, \
+ .offset_enable = _r_enable, \
+ .shift_status_lock = 8 + (_shift), \
+ .shift_status_updating = _shift, \
+ .shift_enable = _shift, \
+ }
+
+#define SG2042_PLL_FW_RO(_id, _name, _parent, _r_stat, _r_enable, _r_ctrl, _shift) \
+ { \
+ .hw.init = CLK_HW_INIT_FW_NAME( \
+ _name, \
+ _parent, \
+ &sg2042_clk_pll_ro_ops, \
+ CLK_GET_RATE_NOCACHE | CLK_GET_ACCURACY_NOCACHE),\
+ .id = _id, \
+ .offset_ctrl = _r_ctrl, \
+ .offset_status = _r_stat, \
+ .offset_enable = _r_enable, \
+ .shift_status_lock = 8 + (_shift), \
+ .shift_status_updating = _shift, \
+ .shift_enable = _shift, \
+ }
+
+static struct sg2042_pll_clock sg2042_pll_clks[] = {
+ SG2042_PLL_FW(MPLL_CLK, "mpll_clock", "cgi_main",
+ R_PLL_STAT, R_PLL_CLKEN_CONTROL, R_MPLL_CONTROL, 0),
+ SG2042_PLL_FW_RO(FPLL_CLK, "fpll_clock", "cgi_main",
+ R_PLL_STAT, R_PLL_CLKEN_CONTROL, R_FPLL_CONTROL, 3),
+ SG2042_PLL_FW_RO(DPLL0_CLK, "dpll0_clock", "cgi_dpll0",
+ R_PLL_STAT, R_PLL_CLKEN_CONTROL, R_DPLL0_CONTROL, 4),
+ SG2042_PLL_FW_RO(DPLL1_CLK, "dpll1_clock", "cgi_dpll1",
+ R_PLL_STAT, R_PLL_CLKEN_CONTROL, R_DPLL1_CONTROL, 5),
+};
+
+#define SG2042_DIV_FW(_id, _name, _parent, \
+ _r_ctrl, _shift, _width, \
+ _div_flag, _initval) { \
+ .hw.init = CLK_HW_INIT_FW_NAME( \
+ _name, \
+ _parent, \
+ &sg2042_clk_divider_ops, \
+ 0), \
+ .id = _id, \
+ .offset_ctrl = _r_ctrl, \
+ .shift = _shift, \
+ .width = _width, \
+ .div_flags = _div_flag, \
+ .initval = _initval, \
+ }
+
+#define SG2042_DIV_FW_RO(_id, _name, _parent, \
+ _r_ctrl, _shift, _width, \
+ _div_flag, _initval) { \
+ .hw.init = CLK_HW_INIT_FW_NAME( \
+ _name, \
+ _parent, \
+ &sg2042_clk_divider_ro_ops, \
+ 0), \
+ .id = _id, \
+ .offset_ctrl = _r_ctrl, \
+ .shift = _shift, \
+ .width = _width, \
+ .div_flags = (_div_flag) | CLK_DIVIDER_READ_ONLY, \
+ .initval = _initval, \
+ }
+
+#define SG2042_DIV_HW(_id, _name, _parent, \
+ _r_ctrl, _shift, _width, \
+ _div_flag, _initval) { \
+ .hw.init = CLK_HW_INIT_HW( \
+ _name, \
+ _parent, \
+ &sg2042_clk_divider_ops, \
+ 0), \
+ .id = _id, \
+ .offset_ctrl = _r_ctrl, \
+ .shift = _shift, \
+ .width = _width, \
+ .div_flags = _div_flag, \
+ .initval = _initval, \
+ }
+
+#define SG2042_DIV_HW_RO(_id, _name, _parent, \
+ _r_ctrl, _shift, _width, \
+ _div_flag, _initval) { \
+ .hw.init = CLK_HW_INIT_HW( \
+ _name, \
+ _parent, \
+ &sg2042_clk_divider_ro_ops, \
+ 0), \
+ .id = _id, \
+ .offset_ctrl = _r_ctrl, \
+ .shift = _shift, \
+ .width = _width, \
+ .div_flags = (_div_flag) | CLK_DIVIDER_READ_ONLY, \
+ .initval = _initval, \
+ }
+
+#define SG2042_DIV_HWS(_id, _name, _parent, \
+ _r_ctrl, _shift, _width, \
+ _div_flag, _initval) { \
+ .hw.init = CLK_HW_INIT_HWS( \
+ _name, \
+ _parent, \
+ &sg2042_clk_divider_ops, \
+ 0), \
+ .id = _id, \
+ .offset_ctrl = _r_ctrl, \
+ .shift = _shift, \
+ .width = _width, \
+ .div_flags = _div_flag, \
+ .initval = _initval, \
+ }
+
+#define SG2042_DIV_HWS_RO(_id, _name, _parent, \
+ _r_ctrl, _shift, _width, \
+ _div_flag, _initval) { \
+ .hw.init = CLK_HW_INIT_HWS( \
+ _name, \
+ _parent, \
+ &sg2042_clk_divider_ro_ops, \
+ 0), \
+ .id = _id, \
+ .offset_ctrl = _r_ctrl, \
+ .shift = _shift, \
+ .width = _width, \
+ .div_flags = (_div_flag) | CLK_DIVIDER_READ_ONLY, \
+ .initval = _initval, \
+ }
+
+#define SG2042_GATE_HWS(_id, _name, _parent, _flags, \
+ _r_enable, _bit_idx) { \
+ .hw.init = CLK_HW_INIT_HWS( \
+ _name, \
+ _parent, \
+ NULL, \
+ _flags), \
+ .id = _id, \
+ .offset_enable = _r_enable, \
+ .bit_idx = _bit_idx, \
+ }
+
+#define SG2042_GATE_HW(_id, _name, _parent, _flags, \
+ _r_enable, _bit_idx) { \
+ .hw.init = CLK_HW_INIT_HW( \
+ _name, \
+ _parent, \
+ NULL, \
+ _flags), \
+ .id = _id, \
+ .offset_enable = _r_enable, \
+ .bit_idx = _bit_idx, \
+ }
+
+#define SG2042_GATE_FW(_id, _name, _parent, _flags, \
+ _r_enable, _bit_idx) { \
+ .hw.init = CLK_HW_INIT_FW_NAME( \
+ _name, \
+ _parent, \
+ NULL, \
+ _flags), \
+ .id = _id, \
+ .offset_enable = _r_enable, \
+ .bit_idx = _bit_idx, \
+ }
+
+#define SG2042_MUX(_id, _name, _parents, _flags, _r_select, _shift, _width) { \
+ .hw.init = CLK_HW_INIT_PARENTS_HW( \
+ _name, \
+ _parents, \
+ NULL, \
+ _flags), \
+ .id = _id, \
+ .offset_select = _r_select, \
+ .shift = _shift, \
+ .width = _width, \
+ }
+
+/*
+ * Clock items in the array are sorted according to the clock-tree diagram,
+ * from top to bottom, from upstream to downstream. Read TRM for details.
+ */
+
+/* updated during probe/registration */
+static const struct clk_hw *clk_gate_ddr01_div0[] = { NULL };
+static const struct clk_hw *clk_gate_ddr01_div1[] = { NULL };
+static const struct clk_hw *clk_gate_ddr23_div0[] = { NULL };
+static const struct clk_hw *clk_gate_ddr23_div1[] = { NULL };
+static const struct clk_hw *clk_gate_rp_cpu_normal_div0[] = { NULL };
+static const struct clk_hw *clk_gate_rp_cpu_normal_div1[] = { NULL };
+static const struct clk_hw *clk_gate_axi_ddr_div0[] = { NULL };
+static const struct clk_hw *clk_gate_axi_ddr_div1[] = { NULL };
+
+static const struct sg2042_gate_clock sg2042_gate_clks_level_1[] = {
+ SG2042_GATE_FW(GATE_CLK_DDR01_DIV0, "clk_gate_ddr01_div0", "dpll0",
+ CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+ R_CLKDIVREG27, 4),
+ SG2042_GATE_FW(GATE_CLK_DDR01_DIV1, "clk_gate_ddr01_div1", "fpll",
+ CLK_IS_CRITICAL,
+ R_CLKDIVREG28, 4),
+
+ SG2042_GATE_FW(GATE_CLK_DDR23_DIV0, "clk_gate_ddr23_div0", "dpll1",
+ CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+ R_CLKDIVREG29, 4),
+ SG2042_GATE_FW(GATE_CLK_DDR23_DIV1, "clk_gate_ddr23_div1", "fpll",
+ CLK_IS_CRITICAL,
+ R_CLKDIVREG30, 4),
+
+ SG2042_GATE_FW(GATE_CLK_RP_CPU_NORMAL_DIV0,
+ "clk_gate_rp_cpu_normal_div0", "mpll",
+ CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
+ R_CLKDIVREG0, 4),
+ SG2042_GATE_FW(GATE_CLK_RP_CPU_NORMAL_DIV1,
+ "clk_gate_rp_cpu_normal_div1", "fpll",
+ CLK_IS_CRITICAL,
+ R_CLKDIVREG1, 4),
+
+ SG2042_GATE_FW(GATE_CLK_AXI_DDR_DIV0, "clk_gate_axi_ddr_div0", "mpll",
+ CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
+ R_CLKDIVREG25, 4),
+ SG2042_GATE_FW(GATE_CLK_AXI_DDR_DIV1, "clk_gate_axi_ddr_div1", "fpll",
+ CLK_IS_CRITICAL,
+ R_CLKDIVREG26, 4),
+};
+
+#define DEF_DIVFLAG (CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO)
+
+static struct sg2042_divider_clock sg2042_div_clks_level_1[] = {
+ SG2042_DIV_HWS_RO(DIV_CLK_DPLL0_DDR01_0,
+ "clk_div_ddr01_0", clk_gate_ddr01_div0,
+ R_CLKDIVREG27, 16, 5, DEF_DIVFLAG, 1),
+ SG2042_DIV_HWS_RO(DIV_CLK_FPLL_DDR01_1,
+ "clk_div_ddr01_1", clk_gate_ddr01_div1,
+ R_CLKDIVREG28, 16, 5, DEF_DIVFLAG, 1),
+
+ SG2042_DIV_HWS_RO(DIV_CLK_DPLL1_DDR23_0,
+ "clk_div_ddr23_0", clk_gate_ddr23_div0,
+ R_CLKDIVREG29, 16, 5, DEF_DIVFLAG, 1),
+ SG2042_DIV_HWS_RO(DIV_CLK_FPLL_DDR23_1,
+ "clk_div_ddr23_1", clk_gate_ddr23_div1,
+ R_CLKDIVREG30, 16, 5, DEF_DIVFLAG, 1),
+
+ SG2042_DIV_HWS(DIV_CLK_MPLL_RP_CPU_NORMAL_0,
+ "clk_div_rp_cpu_normal_0", clk_gate_rp_cpu_normal_div0,
+ R_CLKDIVREG0, 16, 5, DEF_DIVFLAG, 1),
+ SG2042_DIV_HWS(DIV_CLK_FPLL_RP_CPU_NORMAL_1,
+ "clk_div_rp_cpu_normal_1", clk_gate_rp_cpu_normal_div1,
+ R_CLKDIVREG1, 16, 5, DEF_DIVFLAG, 1),
+
+ SG2042_DIV_HWS(DIV_CLK_MPLL_AXI_DDR_0,
+ "clk_div_axi_ddr_0", clk_gate_axi_ddr_div0,
+ R_CLKDIVREG25, 16, 5, DEF_DIVFLAG, 2),
+ SG2042_DIV_HWS(DIV_CLK_FPLL_AXI_DDR_1,
+ "clk_div_axi_ddr_1", clk_gate_axi_ddr_div1,
+ R_CLKDIVREG26, 16, 5, DEF_DIVFLAG, 1),
+};
+
+/*
+ * Note: regarding names for mux clock, "0/1" or "div0/div1" means the
+ * first/second parent input source, not the register value.
+ * For example:
+ * "clk_div_ddr01_0" is the name of Clock divider 0 control of DDR01, and
+ * "clk_gate_ddr01_div0" is the gate clock in front of the "clk_div_ddr01_0",
+ * they are both controlled by register CLKDIVREG27;
+ * "clk_div_ddr01_1" is the name of Clock divider 1 control of DDR01, and
+ * "clk_gate_ddr01_div1" is the gate clock in front of the "clk_div_ddr01_1",
+ * they are both controlled by register CLKDIVREG28;
+ * While for register value of mux selection, use Clock Select for DDR01’s clock
+ * as example, see CLKSELREG0, bit[2].
+ * 1: Select in_dpll0_clk as clock source, correspondng to the parent input
+ * source from "clk_div_ddr01_0".
+ * 0: Select in_fpll_clk as clock source, corresponding to the parent input
+ * source from "clk_div_ddr01_1".
+ * So we need a table to define the array of register values corresponding to
+ * the parent index and tell CCF about this when registering mux clock.
+ */
+static const u32 sg2042_mux_table[] = {1, 0};
+
+/* Aliases just for easy reading */
+#define clk_div_ddr01_0 (&sg2042_div_clks_level_1[0].hw)
+#define clk_div_ddr01_1 (&sg2042_div_clks_level_1[1].hw)
+#define clk_div_ddr23_0 (&sg2042_div_clks_level_1[2].hw)
+#define clk_div_ddr23_1 (&sg2042_div_clks_level_1[3].hw)
+#define clk_div_rp_cpu_normal_0 (&sg2042_div_clks_level_1[4].hw)
+#define clk_div_rp_cpu_normal_1 (&sg2042_div_clks_level_1[5].hw)
+#define clk_div_axi_ddr_0 (&sg2042_div_clks_level_1[6].hw)
+#define clk_div_axi_ddr_1 (&sg2042_div_clks_level_1[7].hw)
+
+static const struct clk_hw *clk_mux_ddr01_p[] = {
+ clk_div_ddr01_0,
+ clk_div_ddr01_1,
+};
+
+static const struct clk_hw *clk_mux_ddr23_p[] = {
+ clk_div_ddr23_0,
+ clk_div_ddr23_1,
+};
+
+static const struct clk_hw *clk_mux_rp_cpu_normal_p[] = {
+ clk_div_rp_cpu_normal_0,
+ clk_div_rp_cpu_normal_1,
+};
+
+static const struct clk_hw *clk_mux_axi_ddr_p[] = {
+ clk_div_axi_ddr_0,
+ clk_div_axi_ddr_1,
+};
+
+/* Mux clocks to be updated during probe/registration */
+static const struct clk_hw *clk_mux_ddr01[] = { NULL };
+static const struct clk_hw *clk_mux_ddr23[] = { NULL };
+static const struct clk_hw *clk_mux_rp_cpu_normal[] = { NULL };
+static const struct clk_hw *clk_mux_axi_ddr[] = { NULL };
+
+static struct sg2042_mux_clock sg2042_mux_clks[] = {
+ SG2042_MUX(MUX_CLK_DDR01, "clk_mux_ddr01", clk_mux_ddr01_p,
+ CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT | CLK_MUX_READ_ONLY,
+ R_CLKSELREG0, 2, 1),
+ SG2042_MUX(MUX_CLK_DDR23, "clk_mux_ddr23", clk_mux_ddr23_p,
+ CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT | CLK_MUX_READ_ONLY,
+ R_CLKSELREG0, 3, 1),
+ SG2042_MUX(MUX_CLK_RP_CPU_NORMAL, "clk_mux_rp_cpu_normal", clk_mux_rp_cpu_normal_p,
+ CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
+ R_CLKSELREG0, 0, 1),
+ SG2042_MUX(MUX_CLK_AXI_DDR, "clk_mux_axi_ddr", clk_mux_axi_ddr_p,
+ CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
+ R_CLKSELREG0, 1, 1),
+};
+
+/* Aliases just for easy reading */
+#define clk_div_top_rp_cmn_div2 (&sg2042_div_clks_level_2[0].hw)
+#define clk_div_50m_a53 (&sg2042_div_clks_level_2[1].hw)
+#define clk_div_timer1 (&sg2042_div_clks_level_2[2].hw)
+#define clk_div_timer2 (&sg2042_div_clks_level_2[3].hw)
+#define clk_div_timer3 (&sg2042_div_clks_level_2[4].hw)
+#define clk_div_timer4 (&sg2042_div_clks_level_2[5].hw)
+#define clk_div_timer5 (&sg2042_div_clks_level_2[6].hw)
+#define clk_div_timer6 (&sg2042_div_clks_level_2[7].hw)
+#define clk_div_timer7 (&sg2042_div_clks_level_2[8].hw)
+#define clk_div_timer8 (&sg2042_div_clks_level_2[9].hw)
+#define clk_div_uart_500m (&sg2042_div_clks_level_2[10].hw)
+#define clk_div_ahb_lpc (&sg2042_div_clks_level_2[11].hw)
+#define clk_div_efuse (&sg2042_div_clks_level_2[12].hw)
+#define clk_div_tx_eth0 (&sg2042_div_clks_level_2[13].hw)
+#define clk_div_ptp_ref_i_eth0 (&sg2042_div_clks_level_2[14].hw)
+#define clk_div_ref_eth0 (&sg2042_div_clks_level_2[15].hw)
+#define clk_div_emmc (&sg2042_div_clks_level_2[16].hw)
+#define clk_div_sd (&sg2042_div_clks_level_2[17].hw)
+#define clk_div_top_axi0 (&sg2042_div_clks_level_2[18].hw)
+#define clk_div_100k_emmc (&sg2042_div_clks_level_2[19].hw)
+#define clk_div_100k_sd (&sg2042_div_clks_level_2[20].hw)
+#define clk_div_gpio_db (&sg2042_div_clks_level_2[21].hw)
+#define clk_div_top_axi_hsperi (&sg2042_div_clks_level_2[22].hw)
+
+static struct sg2042_divider_clock sg2042_div_clks_level_2[] = {
+ SG2042_DIV_HWS(DIV_CLK_FPLL_TOP_RP_CMN_DIV2,
+ "clk_div_top_rp_cmn_div2", clk_mux_rp_cpu_normal,
+ R_CLKDIVREG3, 16, 16, DEF_DIVFLAG, 2),
+
+ SG2042_DIV_FW(DIV_CLK_FPLL_50M_A53, "clk_div_50m_a53", "fpll",
+ R_CLKDIVREG2, 16, 8, DEF_DIVFLAG, 20),
+ /* downstream of div_50m_a53 */
+ SG2042_DIV_HW(DIV_CLK_FPLL_DIV_TIMER1, "clk_div_timer1", clk_div_50m_a53,
+ R_CLKDIVREG6, 16, 16, DEF_DIVFLAG, 1),
+ SG2042_DIV_HW(DIV_CLK_FPLL_DIV_TIMER2, "clk_div_timer2", clk_div_50m_a53,
+ R_CLKDIVREG7, 16, 16, DEF_DIVFLAG, 1),
+ SG2042_DIV_HW(DIV_CLK_FPLL_DIV_TIMER3, "clk_div_timer3", clk_div_50m_a53,
+ R_CLKDIVREG8, 16, 16, DEF_DIVFLAG, 1),
+ SG2042_DIV_HW(DIV_CLK_FPLL_DIV_TIMER4, "clk_div_timer4", clk_div_50m_a53,
+ R_CLKDIVREG9, 16, 16, DEF_DIVFLAG, 1),
+ SG2042_DIV_HW(DIV_CLK_FPLL_DIV_TIMER5, "clk_div_timer5", clk_div_50m_a53,
+ R_CLKDIVREG10, 16, 16, DEF_DIVFLAG, 1),
+ SG2042_DIV_HW(DIV_CLK_FPLL_DIV_TIMER6, "clk_div_timer6", clk_div_50m_a53,
+ R_CLKDIVREG11, 16, 16, DEF_DIVFLAG, 1),
+ SG2042_DIV_HW(DIV_CLK_FPLL_DIV_TIMER7, "clk_div_timer7", clk_div_50m_a53,
+ R_CLKDIVREG12, 16, 16, DEF_DIVFLAG, 1),
+ SG2042_DIV_HW(DIV_CLK_FPLL_DIV_TIMER8, "clk_div_timer8", clk_div_50m_a53,
+ R_CLKDIVREG13, 16, 16, DEF_DIVFLAG, 1),
+
+ /*
+ * Set clk_div_uart_500m as RO, because the width of CLKDIVREG4 is too
+ * narrow for us to produce 115200. Use UART internal divider directly.
+ */
+ SG2042_DIV_FW_RO(DIV_CLK_FPLL_UART_500M, "clk_div_uart_500m", "fpll",
+ R_CLKDIVREG4, 16, 7, DEF_DIVFLAG, 2),
+ SG2042_DIV_FW(DIV_CLK_FPLL_AHB_LPC, "clk_div_ahb_lpc", "fpll",
+ R_CLKDIVREG5, 16, 16, DEF_DIVFLAG, 5),
+ SG2042_DIV_FW(DIV_CLK_FPLL_EFUSE, "clk_div_efuse", "fpll",
+ R_CLKDIVREG14, 16, 7, DEF_DIVFLAG, 40),
+ SG2042_DIV_FW(DIV_CLK_FPLL_TX_ETH0, "clk_div_tx_eth0", "fpll",
+ R_CLKDIVREG16, 16, 11, DEF_DIVFLAG, 8),
+ SG2042_DIV_FW(DIV_CLK_FPLL_PTP_REF_I_ETH0,
+ "clk_div_ptp_ref_i_eth0", "fpll",
+ R_CLKDIVREG17, 16, 8, DEF_DIVFLAG, 20),
+ SG2042_DIV_FW(DIV_CLK_FPLL_REF_ETH0, "clk_div_ref_eth0", "fpll",
+ R_CLKDIVREG18, 16, 8, DEF_DIVFLAG, 40),
+ SG2042_DIV_FW(DIV_CLK_FPLL_EMMC, "clk_div_emmc", "fpll",
+ R_CLKDIVREG19, 16, 5, DEF_DIVFLAG, 10),
+ SG2042_DIV_FW(DIV_CLK_FPLL_SD, "clk_div_sd", "fpll",
+ R_CLKDIVREG21, 16, 5, DEF_DIVFLAG, 10),
+
+ SG2042_DIV_FW(DIV_CLK_FPLL_TOP_AXI0, "clk_div_top_axi0", "fpll",
+ R_CLKDIVREG23, 16, 5, DEF_DIVFLAG, 10),
+ /* downstream of div_top_axi0 */
+ SG2042_DIV_HW(DIV_CLK_FPLL_100K_EMMC, "clk_div_100k_emmc", clk_div_top_axi0,
+ R_CLKDIVREG20, 16, 16, DEF_DIVFLAG, 1000),
+ SG2042_DIV_HW(DIV_CLK_FPLL_100K_SD, "clk_div_100k_sd", clk_div_top_axi0,
+ R_CLKDIVREG22, 16, 16, DEF_DIVFLAG, 1000),
+ SG2042_DIV_HW(DIV_CLK_FPLL_GPIO_DB, "clk_div_gpio_db", clk_div_top_axi0,
+ R_CLKDIVREG15, 16, 16, DEF_DIVFLAG, 1000),
+
+ SG2042_DIV_FW(DIV_CLK_FPLL_TOP_AXI_HSPERI,
+ "clk_div_top_axi_hsperi", "fpll",
+ R_CLKDIVREG24, 16, 5, DEF_DIVFLAG, 4),
+};
+
+/* Gate clocks to be updated during probe/registration */
+static const struct clk_hw *clk_gate_rp_cpu_normal[] = { NULL };
+static const struct clk_hw *clk_gate_top_rp_cmn_div2[] = { NULL };
+
+static const struct sg2042_gate_clock sg2042_gate_clks_level_2[] = {
+ SG2042_GATE_HWS(GATE_CLK_DDR01, "clk_gate_ddr01", clk_mux_ddr01,
+ CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
+ R_CLKENREG1, 14),
+
+ SG2042_GATE_HWS(GATE_CLK_DDR23, "clk_gate_ddr23", clk_mux_ddr23,
+ CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
+ R_CLKENREG1, 15),
+
+ SG2042_GATE_HWS(GATE_CLK_RP_CPU_NORMAL,
+ "clk_gate_rp_cpu_normal", clk_mux_rp_cpu_normal,
+ CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
+ R_CLKENREG0, 0),
+
+ SG2042_GATE_HWS(GATE_CLK_AXI_DDR, "clk_gate_axi_ddr", clk_mux_axi_ddr,
+ CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
+ R_CLKENREG1, 13),
+
+ /* upon are gate clocks directly downstream of muxes */
+
+ /* downstream of clk_div_top_rp_cmn_div2 */
+ SG2042_GATE_HW(GATE_CLK_TOP_RP_CMN_DIV2,
+ "clk_gate_top_rp_cmn_div2", clk_div_top_rp_cmn_div2,
+ CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, R_CLKENREG0, 2),
+ SG2042_GATE_HWS(GATE_CLK_HSDMA, "clk_gate_hsdma", clk_gate_top_rp_cmn_div2,
+ CLK_SET_RATE_PARENT, R_CLKENREG1, 10),
+
+ /*
+ * downstream of clk_gate_rp_cpu_normal
+ *
+ * FIXME: there should be one 1/2 DIV between clk_gate_rp_cpu_normal
+ * and clk_gate_axi_pcie0/clk_gate_axi_pcie1.
+ * But the 1/2 DIV is fixed and no configurable register exported, so
+ * when reading from these two clocks, the rate value are still the
+ * same as that of clk_gate_rp_cpu_normal, it's not correct.
+ * This just affects the value read.
+ */
+ SG2042_GATE_HWS(GATE_CLK_AXI_PCIE0,
+ "clk_gate_axi_pcie0", clk_gate_rp_cpu_normal,
+ CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, R_CLKENREG1, 8),
+ SG2042_GATE_HWS(GATE_CLK_AXI_PCIE1,
+ "clk_gate_axi_pcie1", clk_gate_rp_cpu_normal,
+ CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, R_CLKENREG1, 9),
+
+ /* downstream of div_50m_a53 */
+ SG2042_GATE_HW(GATE_CLK_A53_50M, "clk_gate_a53_50m", clk_div_50m_a53,
+ CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, R_CLKENREG0, 1),
+ SG2042_GATE_HW(GATE_CLK_TIMER1, "clk_gate_timer1", clk_div_timer1,
+ CLK_SET_RATE_PARENT, R_CLKENREG0, 12),
+ SG2042_GATE_HW(GATE_CLK_TIMER2, "clk_gate_timer2", clk_div_timer2,
+ CLK_SET_RATE_PARENT, R_CLKENREG0, 13),
+ SG2042_GATE_HW(GATE_CLK_TIMER3, "clk_gate_timer3", clk_div_timer3,
+ CLK_SET_RATE_PARENT, R_CLKENREG0, 14),
+ SG2042_GATE_HW(GATE_CLK_TIMER4, "clk_gate_timer4", clk_div_timer4,
+ CLK_SET_RATE_PARENT, R_CLKENREG0, 15),
+ SG2042_GATE_HW(GATE_CLK_TIMER5, "clk_gate_timer5", clk_div_timer5,
+ CLK_SET_RATE_PARENT, R_CLKENREG0, 16),
+ SG2042_GATE_HW(GATE_CLK_TIMER6, "clk_gate_timer6", clk_div_timer6,
+ CLK_SET_RATE_PARENT, R_CLKENREG0, 17),
+ SG2042_GATE_HW(GATE_CLK_TIMER7, "clk_gate_timer7", clk_div_timer7,
+ CLK_SET_RATE_PARENT, R_CLKENREG0, 18),
+ SG2042_GATE_HW(GATE_CLK_TIMER8, "clk_gate_timer8", clk_div_timer8,
+ CLK_SET_RATE_PARENT, R_CLKENREG0, 19),
+
+ /* gate clocks downstream from div clocks one-to-one */
+ SG2042_GATE_HW(GATE_CLK_UART_500M, "clk_gate_uart_500m", clk_div_uart_500m,
+ CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, R_CLKENREG0, 4),
+ SG2042_GATE_HW(GATE_CLK_AHB_LPC, "clk_gate_ahb_lpc", clk_div_ahb_lpc,
+ CLK_SET_RATE_PARENT, R_CLKENREG0, 7),
+ SG2042_GATE_HW(GATE_CLK_EFUSE, "clk_gate_efuse", clk_div_efuse,
+ CLK_SET_RATE_PARENT, R_CLKENREG0, 20),
+ SG2042_GATE_HW(GATE_CLK_TX_ETH0, "clk_gate_tx_eth0", clk_div_tx_eth0,
+ CLK_SET_RATE_PARENT, R_CLKENREG0, 30),
+ SG2042_GATE_HW(GATE_CLK_PTP_REF_I_ETH0,
+ "clk_gate_ptp_ref_i_eth0", clk_div_ptp_ref_i_eth0,
+ CLK_SET_RATE_PARENT, R_CLKENREG1, 0),
+ SG2042_GATE_HW(GATE_CLK_REF_ETH0, "clk_gate_ref_eth0", clk_div_ref_eth0,
+ CLK_SET_RATE_PARENT, R_CLKENREG1, 1),
+ SG2042_GATE_HW(GATE_CLK_EMMC_100M, "clk_gate_emmc", clk_div_emmc,
+ CLK_SET_RATE_PARENT, R_CLKENREG1, 3),
+ SG2042_GATE_HW(GATE_CLK_SD_100M, "clk_gate_sd", clk_div_sd,
+ CLK_SET_RATE_PARENT, R_CLKENREG1, 6),
+
+ /* downstream of clk_div_top_axi0 */
+ SG2042_GATE_HW(GATE_CLK_AHB_ROM, "clk_gate_ahb_rom", clk_div_top_axi0,
+ 0, R_CLKENREG0, 8),
+ SG2042_GATE_HW(GATE_CLK_AHB_SF, "clk_gate_ahb_sf", clk_div_top_axi0,
+ 0, R_CLKENREG0, 9),
+ SG2042_GATE_HW(GATE_CLK_AXI_SRAM, "clk_gate_axi_sram", clk_div_top_axi0,
+ CLK_IGNORE_UNUSED, R_CLKENREG0, 10),
+ SG2042_GATE_HW(GATE_CLK_APB_TIMER, "clk_gate_apb_timer", clk_div_top_axi0,
+ CLK_IGNORE_UNUSED, R_CLKENREG0, 11),
+ SG2042_GATE_HW(GATE_CLK_APB_EFUSE, "clk_gate_apb_efuse", clk_div_top_axi0,
+ 0, R_CLKENREG0, 21),
+ SG2042_GATE_HW(GATE_CLK_APB_GPIO, "clk_gate_apb_gpio", clk_div_top_axi0,
+ 0, R_CLKENREG0, 22),
+ SG2042_GATE_HW(GATE_CLK_APB_GPIO_INTR,
+ "clk_gate_apb_gpio_intr", clk_div_top_axi0,
+ CLK_IS_CRITICAL, R_CLKENREG0, 23),
+ SG2042_GATE_HW(GATE_CLK_APB_I2C, "clk_gate_apb_i2c", clk_div_top_axi0,
+ 0, R_CLKENREG0, 26),
+ SG2042_GATE_HW(GATE_CLK_APB_WDT, "clk_gate_apb_wdt", clk_div_top_axi0,
+ 0, R_CLKENREG0, 27),
+ SG2042_GATE_HW(GATE_CLK_APB_PWM, "clk_gate_apb_pwm", clk_div_top_axi0,
+ 0, R_CLKENREG0, 28),
+ SG2042_GATE_HW(GATE_CLK_APB_RTC, "clk_gate_apb_rtc", clk_div_top_axi0,
+ 0, R_CLKENREG0, 29),
+ SG2042_GATE_HW(GATE_CLK_TOP_AXI0, "clk_gate_top_axi0", clk_div_top_axi0,
+ CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
+ R_CLKENREG1, 11),
+ /* downstream of DIV clocks which are sourced from clk_div_top_axi0 */
+ SG2042_GATE_HW(GATE_CLK_GPIO_DB, "clk_gate_gpio_db", clk_div_gpio_db,
+ CLK_SET_RATE_PARENT, R_CLKENREG0, 24),
+ SG2042_GATE_HW(GATE_CLK_100K_EMMC, "clk_gate_100k_emmc", clk_div_100k_emmc,
+ CLK_SET_RATE_PARENT, R_CLKENREG1, 4),
+ SG2042_GATE_HW(GATE_CLK_100K_SD, "clk_gate_100k_sd", clk_div_100k_sd,
+ CLK_SET_RATE_PARENT, R_CLKENREG1, 7),
+
+ /* downstream of clk_div_top_axi_hsperi */
+ SG2042_GATE_HW(GATE_CLK_SYSDMA_AXI,
+ "clk_gate_sysdma_axi", clk_div_top_axi_hsperi,
+ CLK_SET_RATE_PARENT, R_CLKENREG0, 3),
+ SG2042_GATE_HW(GATE_CLK_APB_UART,
+ "clk_gate_apb_uart", clk_div_top_axi_hsperi,
+ CLK_SET_RATE_PARENT, R_CLKENREG0, 5),
+ SG2042_GATE_HW(GATE_CLK_AXI_DBG_I2C,
+ "clk_gate_axi_dbg_i2c", clk_div_top_axi_hsperi,
+ CLK_SET_RATE_PARENT, R_CLKENREG0, 6),
+ SG2042_GATE_HW(GATE_CLK_APB_SPI,
+ "clk_gate_apb_spi", clk_div_top_axi_hsperi,
+ CLK_SET_RATE_PARENT, R_CLKENREG0, 25),
+ SG2042_GATE_HW(GATE_CLK_AXI_ETH0,
+ "clk_gate_axi_eth0", clk_div_top_axi_hsperi,
+ CLK_SET_RATE_PARENT, R_CLKENREG0, 31),
+ SG2042_GATE_HW(GATE_CLK_AXI_EMMC,
+ "clk_gate_axi_emmc", clk_div_top_axi_hsperi,
+ CLK_SET_RATE_PARENT, R_CLKENREG1, 2),
+ SG2042_GATE_HW(GATE_CLK_AXI_SD,
+ "clk_gate_axi_sd", clk_div_top_axi_hsperi,
+ CLK_SET_RATE_PARENT, R_CLKENREG1, 5),
+ SG2042_GATE_HW(GATE_CLK_TOP_AXI_HSPERI,
+ "clk_gate_top_axi_hsperi", clk_div_top_axi_hsperi,
+ CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
+ R_CLKENREG1, 12),
+};
+
+/*
+ * Gate clocks for RP subsystem (including the MP subsystem), which control
+ * registers are defined in SYS_CTRL.
+ */
+static const struct sg2042_gate_clock sg2042_gate_rp[] = {
+ /* downstream of clk_gate_rp_cpu_normal about rxu */
+ SG2042_GATE_FW(GATE_CLK_RXU0, "clk_gate_rxu0", "rpgate",
+ 0, R_RP_RXU_CLK_ENABLE, 0),
+ SG2042_GATE_FW(GATE_CLK_RXU1, "clk_gate_rxu1", "rpgate",
+ 0, R_RP_RXU_CLK_ENABLE, 1),
+ SG2042_GATE_FW(GATE_CLK_RXU2, "clk_gate_rxu2", "rpgate",
+ 0, R_RP_RXU_CLK_ENABLE, 2),
+ SG2042_GATE_FW(GATE_CLK_RXU3, "clk_gate_rxu3", "rpgate",
+ 0, R_RP_RXU_CLK_ENABLE, 3),
+ SG2042_GATE_FW(GATE_CLK_RXU4, "clk_gate_rxu4", "rpgate",
+ 0, R_RP_RXU_CLK_ENABLE, 4),
+ SG2042_GATE_FW(GATE_CLK_RXU5, "clk_gate_rxu5", "rpgate",
+ 0, R_RP_RXU_CLK_ENABLE, 5),
+ SG2042_GATE_FW(GATE_CLK_RXU6, "clk_gate_rxu6", "rpgate",
+ 0, R_RP_RXU_CLK_ENABLE, 6),
+ SG2042_GATE_FW(GATE_CLK_RXU7, "clk_gate_rxu7", "rpgate",
+ 0, R_RP_RXU_CLK_ENABLE, 7),
+ SG2042_GATE_FW(GATE_CLK_RXU8, "clk_gate_rxu8", "rpgate",
+ 0, R_RP_RXU_CLK_ENABLE, 8),
+ SG2042_GATE_FW(GATE_CLK_RXU9, "clk_gate_rxu9", "rpgate",
+ 0, R_RP_RXU_CLK_ENABLE, 9),
+ SG2042_GATE_FW(GATE_CLK_RXU10, "clk_gate_rxu10", "rpgate",
+ 0, R_RP_RXU_CLK_ENABLE, 10),
+ SG2042_GATE_FW(GATE_CLK_RXU11, "clk_gate_rxu11", "rpgate",
+ 0, R_RP_RXU_CLK_ENABLE, 11),
+ SG2042_GATE_FW(GATE_CLK_RXU12, "clk_gate_rxu12", "rpgate",
+ 0, R_RP_RXU_CLK_ENABLE, 12),
+ SG2042_GATE_FW(GATE_CLK_RXU13, "clk_gate_rxu13", "rpgate",
+ 0, R_RP_RXU_CLK_ENABLE, 13),
+ SG2042_GATE_FW(GATE_CLK_RXU14, "clk_gate_rxu14", "rpgate",
+ 0, R_RP_RXU_CLK_ENABLE, 14),
+ SG2042_GATE_FW(GATE_CLK_RXU15, "clk_gate_rxu15", "rpgate",
+ 0, R_RP_RXU_CLK_ENABLE, 15),
+ SG2042_GATE_FW(GATE_CLK_RXU16, "clk_gate_rxu16", "rpgate",
+ 0, R_RP_RXU_CLK_ENABLE, 16),
+ SG2042_GATE_FW(GATE_CLK_RXU17, "clk_gate_rxu17", "rpgate",
+ 0, R_RP_RXU_CLK_ENABLE, 17),
+ SG2042_GATE_FW(GATE_CLK_RXU18, "clk_gate_rxu18", "rpgate",
+ 0, R_RP_RXU_CLK_ENABLE, 18),
+ SG2042_GATE_FW(GATE_CLK_RXU19, "clk_gate_rxu19", "rpgate",
+ 0, R_RP_RXU_CLK_ENABLE, 19),
+ SG2042_GATE_FW(GATE_CLK_RXU20, "clk_gate_rxu20", "rpgate",
+ 0, R_RP_RXU_CLK_ENABLE, 20),
+ SG2042_GATE_FW(GATE_CLK_RXU21, "clk_gate_rxu21", "rpgate",
+ 0, R_RP_RXU_CLK_ENABLE, 21),
+ SG2042_GATE_FW(GATE_CLK_RXU22, "clk_gate_rxu22", "rpgate",
+ 0, R_RP_RXU_CLK_ENABLE, 22),
+ SG2042_GATE_FW(GATE_CLK_RXU23, "clk_gate_rxu23", "rpgate",
+ 0, R_RP_RXU_CLK_ENABLE, 23),
+ SG2042_GATE_FW(GATE_CLK_RXU24, "clk_gate_rxu24", "rpgate",
+ 0, R_RP_RXU_CLK_ENABLE, 24),
+ SG2042_GATE_FW(GATE_CLK_RXU25, "clk_gate_rxu25", "rpgate",
+ 0, R_RP_RXU_CLK_ENABLE, 25),
+ SG2042_GATE_FW(GATE_CLK_RXU26, "clk_gate_rxu26", "rpgate",
+ 0, R_RP_RXU_CLK_ENABLE, 26),
+ SG2042_GATE_FW(GATE_CLK_RXU27, "clk_gate_rxu27", "rpgate",
+ 0, R_RP_RXU_CLK_ENABLE, 27),
+ SG2042_GATE_FW(GATE_CLK_RXU28, "clk_gate_rxu28", "rpgate",
+ 0, R_RP_RXU_CLK_ENABLE, 28),
+ SG2042_GATE_FW(GATE_CLK_RXU29, "clk_gate_rxu29", "rpgate",
+ 0, R_RP_RXU_CLK_ENABLE, 29),
+ SG2042_GATE_FW(GATE_CLK_RXU30, "clk_gate_rxu30", "rpgate",
+ 0, R_RP_RXU_CLK_ENABLE, 30),
+ SG2042_GATE_FW(GATE_CLK_RXU31, "clk_gate_rxu31", "rpgate",
+ 0, R_RP_RXU_CLK_ENABLE, 31),
+
+ /* downstream of clk_gate_rp_cpu_normal about mp */
+ SG2042_GATE_FW(GATE_CLK_MP0, "clk_gate_mp0", "rpgate",
+ CLK_IS_CRITICAL, R_MP0_CONTROL_REG, 0),
+ SG2042_GATE_FW(GATE_CLK_MP1, "clk_gate_mp1", "rpgate",
+ CLK_IS_CRITICAL, R_MP1_CONTROL_REG, 0),
+ SG2042_GATE_FW(GATE_CLK_MP2, "clk_gate_mp2", "rpgate",
+ CLK_IS_CRITICAL, R_MP2_CONTROL_REG, 0),
+ SG2042_GATE_FW(GATE_CLK_MP3, "clk_gate_mp3", "rpgate",
+ CLK_IS_CRITICAL, R_MP3_CONTROL_REG, 0),
+ SG2042_GATE_FW(GATE_CLK_MP4, "clk_gate_mp4", "rpgate",
+ CLK_IS_CRITICAL, R_MP4_CONTROL_REG, 0),
+ SG2042_GATE_FW(GATE_CLK_MP5, "clk_gate_mp5", "rpgate",
+ CLK_IS_CRITICAL, R_MP5_CONTROL_REG, 0),
+ SG2042_GATE_FW(GATE_CLK_MP6, "clk_gate_mp6", "rpgate",
+ CLK_IS_CRITICAL, R_MP6_CONTROL_REG, 0),
+ SG2042_GATE_FW(GATE_CLK_MP7, "clk_gate_mp7", "rpgate",
+ CLK_IS_CRITICAL, R_MP7_CONTROL_REG, 0),
+ SG2042_GATE_FW(GATE_CLK_MP8, "clk_gate_mp8", "rpgate",
+ CLK_IS_CRITICAL, R_MP8_CONTROL_REG, 0),
+ SG2042_GATE_FW(GATE_CLK_MP9, "clk_gate_mp9", "rpgate",
+ CLK_IS_CRITICAL, R_MP9_CONTROL_REG, 0),
+ SG2042_GATE_FW(GATE_CLK_MP10, "clk_gate_mp10", "rpgate",
+ CLK_IS_CRITICAL, R_MP10_CONTROL_REG, 0),
+ SG2042_GATE_FW(GATE_CLK_MP11, "clk_gate_mp11", "rpgate",
+ CLK_IS_CRITICAL, R_MP11_CONTROL_REG, 0),
+ SG2042_GATE_FW(GATE_CLK_MP12, "clk_gate_mp12", "rpgate",
+ CLK_IS_CRITICAL, R_MP12_CONTROL_REG, 0),
+ SG2042_GATE_FW(GATE_CLK_MP13, "clk_gate_mp13", "rpgate",
+ CLK_IS_CRITICAL, R_MP13_CONTROL_REG, 0),
+ SG2042_GATE_FW(GATE_CLK_MP14, "clk_gate_mp14", "rpgate",
+ CLK_IS_CRITICAL, R_MP14_CONTROL_REG, 0),
+ SG2042_GATE_FW(GATE_CLK_MP15, "clk_gate_mp15", "rpgate",
+ CLK_IS_CRITICAL, R_MP15_CONTROL_REG, 0),
+};
+
+static DEFINE_SPINLOCK(sg2042_clk_lock);
+
+static int sg2042_clk_register_plls(struct device *dev,
+ struct sg2042_clk_data *clk_data,
+ struct sg2042_pll_clock pll_clks[],
+ int num_pll_clks)
+{
+ struct clk_hw *hw;
+ struct sg2042_pll_clock *pll;
+ int i, ret = 0;
+
+ for (i = 0; i < num_pll_clks; i++) {
+ pll = &pll_clks[i];
+ /* assign these for ops usage during registration */
+ pll->base = clk_data->iobase;
+ pll->lock = &sg2042_clk_lock;
+
+ hw = &pll->hw;
+ ret = devm_clk_hw_register(dev, hw);
+ if (ret) {
+ pr_err("failed to register clock %s\n", pll->hw.init->name);
+ break;
+ }
+
+ clk_data->onecell_data.hws[pll->id] = hw;
+ }
+
+ return ret;
+}
+
+static int sg2042_clk_register_divs(struct device *dev,
+ struct sg2042_clk_data *clk_data,
+ struct sg2042_divider_clock div_clks[],
+ int num_div_clks)
+{
+ struct clk_hw *hw;
+ struct sg2042_divider_clock *div;
+ int i, ret = 0;
+
+ for (i = 0; i < num_div_clks; i++) {
+ div = &div_clks[i];
+
+ if (div->div_flags & CLK_DIVIDER_HIWORD_MASK) {
+ if (div->width + div->shift > 16) {
+ pr_warn("divider value exceeds LOWORD field\n");
+ ret = -EINVAL;
+ break;
+ }
+ }
+
+ div->reg = clk_data->iobase + div->offset_ctrl;
+ div->lock = &sg2042_clk_lock;
+
+ hw = &div->hw;
+ ret = devm_clk_hw_register(dev, hw);
+ if (ret) {
+ pr_err("failed to register clock %s\n", div->hw.init->name);
+ break;
+ }
+
+ clk_data->onecell_data.hws[div->id] = hw;
+ }
+
+ return ret;
+}
+
+static int sg2042_clk_register_gates(struct device *dev,
+ struct sg2042_clk_data *clk_data,
+ const struct sg2042_gate_clock gate_clks[],
+ int num_gate_clks)
+{
+ struct clk_hw *hw;
+ const struct sg2042_gate_clock *gate;
+ int i, ret = 0;
+
+ for (i = 0; i < num_gate_clks; i++) {
+ gate = &gate_clks[i];
+ hw = __devm_clk_hw_register_gate
+ (dev,
+ NULL,
+ gate->hw.init->name,
+ NULL,
+ gate->hw.init->parent_hws[0],
+ NULL,
+ gate->hw.init->flags,
+ clk_data->iobase + gate->offset_enable,
+ gate->bit_idx,
+ 0,
+ &sg2042_clk_lock);
+ if (IS_ERR(hw)) {
+ pr_err("failed to register clock %s\n", gate->hw.init->name);
+ ret = PTR_ERR(hw);
+ break;
+ }
+
+ clk_data->onecell_data.hws[gate->id] = hw;
+
+ /* Updated some clocks which take the role of parent */
+ switch (gate->id) {
+ case GATE_CLK_RP_CPU_NORMAL:
+ *clk_gate_rp_cpu_normal = hw;
+ break;
+ case GATE_CLK_TOP_RP_CMN_DIV2:
+ *clk_gate_top_rp_cmn_div2 = hw;
+ break;
+ }
+ }
+
+ return ret;
+}
+
+static int sg2042_clk_register_gates_fw(struct device *dev,
+ struct sg2042_clk_data *clk_data,
+ const struct sg2042_gate_clock gate_clks[],
+ int num_gate_clks)
+{
+ struct clk_hw *hw;
+ const struct sg2042_gate_clock *gate;
+ int i, ret = 0;
+
+ for (i = 0; i < num_gate_clks; i++) {
+ gate = &gate_clks[i];
+ hw = devm_clk_hw_register_gate_parent_data
+ (dev,
+ gate->hw.init->name,
+ gate->hw.init->parent_data,
+ gate->hw.init->flags,
+ clk_data->iobase + gate->offset_enable,
+ gate->bit_idx,
+ 0,
+ &sg2042_clk_lock);
+ if (IS_ERR(hw)) {
+ pr_err("failed to register clock %s\n", gate->hw.init->name);
+ ret = PTR_ERR(hw);
+ break;
+ }
+
+ clk_data->onecell_data.hws[gate->id] = hw;
+
+ /* Updated some clocks which take the role of parent */
+ switch (gate->id) {
+ case GATE_CLK_DDR01_DIV0:
+ *clk_gate_ddr01_div0 = hw;
+ break;
+ case GATE_CLK_DDR01_DIV1:
+ *clk_gate_ddr01_div1 = hw;
+ break;
+ case GATE_CLK_DDR23_DIV0:
+ *clk_gate_ddr23_div0 = hw;
+ break;
+ case GATE_CLK_DDR23_DIV1:
+ *clk_gate_ddr23_div1 = hw;
+ break;
+ case GATE_CLK_RP_CPU_NORMAL_DIV0:
+ *clk_gate_rp_cpu_normal_div0 = hw;
+ break;
+ case GATE_CLK_RP_CPU_NORMAL_DIV1:
+ *clk_gate_rp_cpu_normal_div1 = hw;
+ break;
+ case GATE_CLK_AXI_DDR_DIV0:
+ *clk_gate_axi_ddr_div0 = hw;
+ break;
+ case GATE_CLK_AXI_DDR_DIV1:
+ *clk_gate_axi_ddr_div1 = hw;
+ break;
+ }
+ }
+
+ return ret;
+}
+
+static int sg2042_mux_notifier_cb(struct notifier_block *nb,
+ unsigned long event,
+ void *data)
+{
+ int ret = 0;
+ struct clk_notifier_data *ndata = data;
+ struct clk_hw *hw = __clk_get_hw(ndata->clk);
+ const struct clk_ops *ops = &clk_mux_ops;
+ struct sg2042_mux_clock *mux = to_sg2042_mux_nb(nb);
+
+ /* To switch to fpll before changing rate and restore after that */
+ if (event == PRE_RATE_CHANGE) {
+ mux->original_index = ops->get_parent(hw);
+
+ /*
+ * "1" is the array index of the second parent input source of
+ * mux. For SG2042, it's fpll for all mux clocks.
+ * "0" is the array index of the frist parent input source of
+ * mux, For SG2042, it's mpll.
+ * FIXME, any good idea to avoid magic number?
+ */
+ if (mux->original_index == 0)
+ ret = ops->set_parent(hw, 1);
+ } else if (event == POST_RATE_CHANGE) {
+ ret = ops->set_parent(hw, mux->original_index);
+ }
+
+ return notifier_from_errno(ret);
+}
+
+static int sg2042_clk_register_muxs(struct device *dev,
+ struct sg2042_clk_data *clk_data,
+ struct sg2042_mux_clock mux_clks[],
+ int num_mux_clks)
+{
+ struct clk_hw *hw;
+ struct sg2042_mux_clock *mux;
+ int i, ret = 0;
+
+ for (i = 0; i < num_mux_clks; i++) {
+ mux = &mux_clks[i];
+
+ hw = __devm_clk_hw_register_mux
+ (dev,
+ NULL,
+ mux->hw.init->name,
+ mux->hw.init->num_parents,
+ NULL,
+ mux->hw.init->parent_hws,
+ NULL,
+ mux->hw.init->flags,
+ clk_data->iobase + mux->offset_select,
+ mux->shift,
+ BIT(mux->width) - 1,
+ 0,
+ sg2042_mux_table,
+ &sg2042_clk_lock);
+ if (IS_ERR(hw)) {
+ pr_err("failed to register clock %s\n", mux->hw.init->name);
+ ret = PTR_ERR(hw);
+ break;
+ }
+
+ clk_data->onecell_data.hws[mux->id] = hw;
+
+ /* Updated some clocks which takes the role of parent */
+ switch (mux->id) {
+ case MUX_CLK_DDR01:
+ *clk_mux_ddr01 = hw;
+ break;
+ case MUX_CLK_DDR23:
+ *clk_mux_ddr23 = hw;
+ break;
+ case MUX_CLK_RP_CPU_NORMAL:
+ *clk_mux_rp_cpu_normal = hw;
+ break;
+ case MUX_CLK_AXI_DDR:
+ *clk_mux_axi_ddr = hw;
+ break;
+ }
+
+ /*
+ * FIXME: Theoretically, we should set parent for the
+ * mux, but seems hardware has done this for us with
+ * default value, so we don't set parent again here.
+ */
+
+ if (!(mux->hw.init->flags & CLK_MUX_READ_ONLY)) {
+ mux->clk_nb.notifier_call = sg2042_mux_notifier_cb;
+ ret = devm_clk_notifier_register(dev, hw->clk, &mux->clk_nb);
+ if (ret) {
+ pr_err("failed to register clock notifier for %s\n",
+ mux->hw.init->name);
+ break;
+ }
+ }
+ }
+
+ return ret;
+}
+
+static int sg2042_init_clkdata(struct platform_device *pdev,
+ int num_clks,
+ struct sg2042_clk_data **pp_clk_data)
+{
+ struct sg2042_clk_data *clk_data = NULL;
+
+ clk_data = devm_kzalloc(&pdev->dev,
+ struct_size(clk_data, onecell_data.hws, num_clks),
+ GFP_KERNEL);
+ if (!clk_data)
+ return -ENOMEM;
+
+ clk_data->iobase = devm_platform_ioremap_resource(pdev, 0);
+ if (WARN_ON(IS_ERR(clk_data->iobase)))
+ return PTR_ERR(clk_data->iobase);
+
+ clk_data->onecell_data.num = num_clks;
+
+ *pp_clk_data = clk_data;
+
+ return 0;
+}
+
+static int sg2042_clkgen_probe(struct platform_device *pdev)
+{
+ struct sg2042_clk_data *clk_data = NULL;
+ int ret = 0;
+ int num_clks = 0;
+
+ num_clks = ARRAY_SIZE(sg2042_div_clks_level_1) +
+ ARRAY_SIZE(sg2042_div_clks_level_2) +
+ ARRAY_SIZE(sg2042_gate_clks_level_1) +
+ ARRAY_SIZE(sg2042_gate_clks_level_2) +
+ ARRAY_SIZE(sg2042_mux_clks);
+
+ ret = sg2042_init_clkdata(pdev, num_clks, &clk_data);
+ if (ret)
+ goto error_out;
+
+ /* level-1 gates */
+ ret = sg2042_clk_register_gates_fw(&pdev->dev, clk_data,
+ sg2042_gate_clks_level_1,
+ ARRAY_SIZE(sg2042_gate_clks_level_1));
+ if (ret)
+ goto error_out;
+
+ /* level-1 div */
+ ret = sg2042_clk_register_divs(&pdev->dev, clk_data, sg2042_div_clks_level_1,
+ ARRAY_SIZE(sg2042_div_clks_level_1));
+ if (ret)
+ goto error_out;
+
+ /* mux */
+ ret = sg2042_clk_register_muxs(&pdev->dev, clk_data, sg2042_mux_clks,
+ ARRAY_SIZE(sg2042_mux_clks));
+ if (ret)
+ goto error_out;
+
+ /* level 2 div */
+ ret = sg2042_clk_register_divs(&pdev->dev, clk_data, sg2042_div_clks_level_2,
+ ARRAY_SIZE(sg2042_div_clks_level_2));
+ if (ret)
+ goto error_out;
+
+ /* level 2 gate */
+ ret = sg2042_clk_register_gates(&pdev->dev, clk_data, sg2042_gate_clks_level_2,
+ ARRAY_SIZE(sg2042_gate_clks_level_2));
+ if (ret)
+ goto error_out;
+
+ return devm_of_clk_add_hw_provider(&pdev->dev,
+ of_clk_hw_onecell_get,
+ &clk_data->onecell_data);
+
+error_out:
+ pr_err("%s failed error number %d\n", __func__, ret);
+ return ret;
+}
+
+static int sg2042_rpgate_probe(struct platform_device *pdev)
+{
+ struct sg2042_clk_data *clk_data = NULL;
+ int ret = 0;
+ int num_clks = 0;
+
+ num_clks = ARRAY_SIZE(sg2042_gate_rp);
+
+ ret = sg2042_init_clkdata(pdev, num_clks, &clk_data);
+ if (ret)
+ goto error_out;
+
+ ret = sg2042_clk_register_gates_fw(&pdev->dev, clk_data, sg2042_gate_rp,
+ num_clks);
+ if (ret)
+ goto error_out;
+
+ return devm_of_clk_add_hw_provider(&pdev->dev,
+ of_clk_hw_onecell_get,
+ &clk_data->onecell_data);
+
+error_out:
+ pr_err("%s failed error number %d\n", __func__, ret);
+ return ret;
+}
+
+static int sg2042_pll_probe(struct platform_device *pdev)
+{
+ struct sg2042_clk_data *clk_data = NULL;
+ int ret = 0;
+ int num_clks = 0;
+
+ num_clks = ARRAY_SIZE(sg2042_pll_clks);
+
+ ret = sg2042_init_clkdata(pdev, num_clks, &clk_data);
+ if (ret)
+ goto error_out;
+
+ ret = sg2042_clk_register_plls(&pdev->dev, clk_data, sg2042_pll_clks,
+ num_clks);
+ if (ret)
+ goto error_out;
+
+ return devm_of_clk_add_hw_provider(&pdev->dev,
+ of_clk_hw_onecell_get,
+ &clk_data->onecell_data);
+
+error_out:
+ pr_err("%s failed error number %d\n", __func__, ret);
+ return ret;
+}
+
+static const struct of_device_id sg2042_clkgen_match[] = {
+ { .compatible = "sophgo,sg2042-clkgen" },
+ { /* sentinel */ }
+};
+
+static struct platform_driver sg2042_clkgen_driver = {
+ .probe = sg2042_clkgen_probe,
+ .driver = {
+ .name = "clk-sophgo-sg2042-clkgen",
+ .of_match_table = sg2042_clkgen_match,
+ .suppress_bind_attrs = true,
+ },
+};
+builtin_platform_driver(sg2042_clkgen_driver);
+
+static const struct of_device_id sg2042_rpgate_match[] = {
+ { .compatible = "sophgo,sg2042-rpgate" },
+ { /* sentinel */ }
+};
+
+static struct platform_driver sg2042_rpgate_driver = {
+ .probe = sg2042_rpgate_probe,
+ .driver = {
+ .name = "clk-sophgo-sg2042-rpgate",
+ .of_match_table = sg2042_rpgate_match,
+ .suppress_bind_attrs = true,
+ },
+};
+builtin_platform_driver(sg2042_rpgate_driver);
+
+static const struct of_device_id sg2042_pll_match[] = {
+ { .compatible = "sophgo,sg2042-pll" },
+ { /* sentinel */ }
+};
+
+static struct platform_driver sg2042_pll_driver = {
+ .probe = sg2042_pll_probe,
+ .driver = {
+ .name = "clk-sophgo-sg2042-pll",
+ .of_match_table = sg2042_pll_match,
+ .suppress_bind_attrs = true,
+ },
+};
+builtin_platform_driver(sg2042_pll_driver);
--
2.25.1
Powered by blists - more mailing lists