| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240429190046.24252-6-vassilisamir@gmail.com>
Date: Mon, 29 Apr 2024 21:00:41 +0200
From: Vasileios Amoiridis <vassilisamir@...il.com>
To: jic23@...nel.org
Cc: lars@...afoo.de,
andriy.shevchenko@...ux.intel.com,
ang.iglesiasg@...il.com,
mazziesaccount@...il.com,
ak@...klinger.de,
petre.rodan@...dimension.ro,
phil@...pberrypi.com,
579lpy@...il.com,
linus.walleij@...aro.org,
semen.protsenko@...aro.org,
linux-iio@...r.kernel.org,
linux-kernel@...r.kernel.org,
Vasileios Amoiridis <vassilisamir@...il.com>
Subject: [PATCH v5 05/10] iio: pressure: bmp280: Make return values consistent
Throughout the driver there are quite a few places were return
values are treated as errors if they are negative or not-zero.
This commit tries to make the return values of those functions
consistent and treat them as errors in case there is a negative
value since the vast majority of the functions are returning
erorrs coming from regmap_*() functions.
While at it, add error messages that were not implemented before.
Finally, remove any extra error checks that are dead code.
Signed-off-by: Vasileios Amoiridis <vassilisamir@...il.com>
---
drivers/iio/pressure/bmp280-core.c | 175 ++++++++++++++++-------------
1 file changed, 96 insertions(+), 79 deletions(-)
diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
index ed49e0779d41..8290028824e9 100644
--- a/drivers/iio/pressure/bmp280-core.c
+++ b/drivers/iio/pressure/bmp280-core.c
@@ -222,10 +222,8 @@ static int bme280_read_calib(struct bmp280_data *data)
/* Load shared calibration params with bmp280 first */
ret = bmp280_read_calib(data);
- if (ret < 0) {
- dev_err(dev, "failed to read calibration parameters\n");
+ if (ret < 0)
return ret;
- }
/*
* Read humidity calibration values.
@@ -552,7 +550,7 @@ static int bme280_write_oversampling_ratio_humid(struct bmp280_data *data,
data->oversampling_humid = ilog2(val);
ret = data->chip_info->chip_config(data);
- if (ret) {
+ if (ret < 0) {
data->oversampling_humid = prev;
data->chip_info->chip_config(data);
return ret;
@@ -577,7 +575,7 @@ static int bmp280_write_oversampling_ratio_temp(struct bmp280_data *data,
data->oversampling_temp = ilog2(val);
ret = data->chip_info->chip_config(data);
- if (ret) {
+ if (ret < 0) {
data->oversampling_temp = prev;
data->chip_info->chip_config(data);
return ret;
@@ -602,7 +600,7 @@ static int bmp280_write_oversampling_ratio_press(struct bmp280_data *data,
data->oversampling_press = ilog2(val);
ret = data->chip_info->chip_config(data);
- if (ret) {
+ if (ret < 0) {
data->oversampling_press = prev;
data->chip_info->chip_config(data);
return ret;
@@ -627,7 +625,7 @@ static int bmp280_write_sampling_frequency(struct bmp280_data *data,
data->sampling_freq = i;
ret = data->chip_info->chip_config(data);
- if (ret) {
+ if (ret < 0) {
data->sampling_freq = prev;
data->chip_info->chip_config(data);
return ret;
@@ -651,7 +649,7 @@ static int bmp280_write_iir_filter_coeffs(struct bmp280_data *data, int val)
data->iir_filter_coeff = i;
ret = data->chip_info->chip_config(data);
- if (ret) {
+ if (ret < 0) {
data->iir_filter_coeff = prev;
data->chip_info->chip_config(data);
return ret;
@@ -841,8 +839,10 @@ static int bme280_chip_config(struct bmp280_data *data)
*/
ret = regmap_update_bits(data->regmap, BME280_REG_CTRL_HUMIDITY,
BME280_OSRS_HUMIDITY_MASK, osrs);
- if (ret < 0)
+ if (ret < 0) {
+ dev_err(data->dev, "failed to set humidity oversampling");
return ret;
+ }
return bmp280_chip_config(data);
}
@@ -892,7 +892,7 @@ static int bmp380_cmd(struct bmp280_data *data, u8 cmd)
/* Check if device is ready to process a command */
ret = regmap_read(data->regmap, BMP380_REG_STATUS, ®);
- if (ret) {
+ if (ret < 0) {
dev_err(data->dev, "failed to read error register\n");
return ret;
}
@@ -903,7 +903,7 @@ static int bmp380_cmd(struct bmp280_data *data, u8 cmd)
/* Send command to process */
ret = regmap_write(data->regmap, BMP380_REG_CMD, cmd);
- if (ret) {
+ if (ret < 0) {
dev_err(data->dev, "failed to send command to device\n");
return ret;
}
@@ -911,7 +911,7 @@ static int bmp380_cmd(struct bmp280_data *data, u8 cmd)
usleep_range(data->start_up_time, data->start_up_time + 100);
/* Check for command processing error */
ret = regmap_read(data->regmap, BMP380_REG_ERROR, ®);
- if (ret) {
+ if (ret < 0) {
dev_err(data->dev, "error reading ERROR reg\n");
return ret;
}
@@ -1003,7 +1003,7 @@ static int bmp380_read_temp(struct bmp280_data *data, int *val, int *val2)
ret = regmap_bulk_read(data->regmap, BMP380_REG_TEMP_XLSB,
data->buf, sizeof(data->buf));
- if (ret) {
+ if (ret < 0) {
dev_err(data->dev, "failed to read temperature\n");
return ret;
}
@@ -1036,12 +1036,12 @@ static int bmp380_read_press(struct bmp280_data *data, int *val, int *val2)
/* Read and compensate for temperature so we get a reading of t_fine */
ret = bmp380_read_temp(data, NULL, NULL);
- if (ret)
+ if (ret < 0)
return ret;
ret = regmap_bulk_read(data->regmap, BMP380_REG_PRESS_XLSB,
data->buf, sizeof(data->buf));
- if (ret) {
+ if (ret < 0) {
dev_err(data->dev, "failed to read pressure\n");
return ret;
}
@@ -1069,9 +1069,9 @@ static int bmp380_read_calib(struct bmp280_data *data)
ret = regmap_bulk_read(data->regmap, BMP380_REG_CALIB_TEMP_START,
data->bmp380_cal_buf,
sizeof(data->bmp380_cal_buf));
- if (ret) {
+ if (ret < 0) {
dev_err(data->dev,
- "failed to read temperature calibration parameters\n");
+ "failed to read calibration parameters\n");
return ret;
}
@@ -1137,7 +1137,7 @@ static int bmp380_chip_config(struct bmp280_data *data)
BMP380_CTRL_SENSORS_MASK,
BMP380_CTRL_SENSORS_PRESS_EN |
BMP380_CTRL_SENSORS_TEMP_EN);
- if (ret) {
+ if (ret < 0) {
dev_err(data->dev,
"failed to write operation control register\n");
return ret;
@@ -1151,7 +1151,7 @@ static int bmp380_chip_config(struct bmp280_data *data)
BMP380_OSRS_TEMP_MASK |
BMP380_OSRS_PRESS_MASK,
osrs, &aux);
- if (ret) {
+ if (ret < 0) {
dev_err(data->dev, "failed to write oversampling register\n");
return ret;
}
@@ -1161,7 +1161,7 @@ static int bmp380_chip_config(struct bmp280_data *data)
ret = regmap_update_bits_check(data->regmap, BMP380_REG_ODR,
BMP380_ODRS_MASK, data->sampling_freq,
&aux);
- if (ret) {
+ if (ret < 0) {
dev_err(data->dev, "failed to write ODR selection register\n");
return ret;
}
@@ -1171,7 +1171,7 @@ static int bmp380_chip_config(struct bmp280_data *data)
ret = regmap_update_bits_check(data->regmap, BMP380_REG_CONFIG, BMP380_FILTER_MASK,
FIELD_PREP(BMP380_FILTER_MASK, data->iir_filter_coeff),
&aux);
- if (ret) {
+ if (ret < 0) {
dev_err(data->dev, "failed to write config register\n");
return ret;
}
@@ -1190,7 +1190,7 @@ static int bmp380_chip_config(struct bmp280_data *data)
ret = regmap_write_bits(data->regmap, BMP380_REG_POWER_CONTROL,
BMP380_MODE_MASK,
FIELD_PREP(BMP380_MODE_MASK, BMP380_MODE_SLEEP));
- if (ret) {
+ if (ret < 0) {
dev_err(data->dev, "failed to set sleep mode\n");
return ret;
}
@@ -1198,7 +1198,7 @@ static int bmp380_chip_config(struct bmp280_data *data)
ret = regmap_write_bits(data->regmap, BMP380_REG_POWER_CONTROL,
BMP380_MODE_MASK,
FIELD_PREP(BMP380_MODE_MASK, BMP380_MODE_NORMAL));
- if (ret) {
+ if (ret < 0) {
dev_err(data->dev, "failed to set normal mode\n");
return ret;
}
@@ -1211,7 +1211,7 @@ static int bmp380_chip_config(struct bmp280_data *data)
/* Check config error flag */
ret = regmap_read(data->regmap, BMP380_REG_ERROR, &tmp);
- if (ret) {
+ if (ret < 0) {
dev_err(data->dev, "failed to read error register\n");
return ret;
}
@@ -1269,7 +1269,7 @@ static int bmp580_soft_reset(struct bmp280_data *data)
int ret;
ret = regmap_write(data->regmap, BMP580_REG_CMD, BMP580_CMD_SOFT_RESET);
- if (ret) {
+ if (ret < 0) {
dev_err(data->dev, "failed to send reset command to device\n");
return ret;
}
@@ -1277,13 +1277,13 @@ static int bmp580_soft_reset(struct bmp280_data *data)
/* Dummy read of chip_id */
ret = regmap_read(data->regmap, BMP580_REG_CHIP_ID, ®);
- if (ret) {
+ if (ret < 0) {
dev_err(data->dev, "failed to reestablish comms after reset\n");
return ret;
}
ret = regmap_read(data->regmap, BMP580_REG_INT_STATUS, ®);
- if (ret) {
+ if (ret < 0) {
dev_err(data->dev, "error reading interrupt status register\n");
return ret;
}
@@ -1308,7 +1308,7 @@ static int bmp580_nvm_operation(struct bmp280_data *data, bool is_write)
/* Check NVM ready flag */
ret = regmap_read(data->regmap, BMP580_REG_STATUS, ®);
- if (ret) {
+ if (ret < 0) {
dev_err(data->dev, "failed to check nvm status\n");
return ret;
}
@@ -1320,7 +1320,7 @@ static int bmp580_nvm_operation(struct bmp280_data *data, bool is_write)
/* Start NVM operation sequence */
ret = regmap_write(data->regmap, BMP580_REG_CMD,
BMP580_CMD_NVM_OP_SEQ_0);
- if (ret) {
+ if (ret < 0) {
dev_err(data->dev,
"failed to send nvm operation's first sequence\n");
return ret;
@@ -1329,7 +1329,7 @@ static int bmp580_nvm_operation(struct bmp280_data *data, bool is_write)
/* Send NVM write sequence */
ret = regmap_write(data->regmap, BMP580_REG_CMD,
BMP580_CMD_NVM_WRITE_SEQ_1);
- if (ret) {
+ if (ret < 0) {
dev_err(data->dev,
"failed to send nvm write sequence\n");
return ret;
@@ -1341,7 +1341,7 @@ static int bmp580_nvm_operation(struct bmp280_data *data, bool is_write)
/* Send NVM read sequence */
ret = regmap_write(data->regmap, BMP580_REG_CMD,
BMP580_CMD_NVM_READ_SEQ_1);
- if (ret) {
+ if (ret < 0) {
dev_err(data->dev,
"failed to send nvm read sequence\n");
return ret;
@@ -1350,16 +1350,12 @@ static int bmp580_nvm_operation(struct bmp280_data *data, bool is_write)
poll = 50;
timeout = 400;
}
- if (ret) {
- dev_err(data->dev, "failed to write command sequence\n");
- return -EIO;
- }
/* Wait until NVM is ready again */
ret = regmap_read_poll_timeout(data->regmap, BMP580_REG_STATUS, reg,
(reg & BMP580_STATUS_NVM_RDY_MASK),
poll, timeout);
- if (ret) {
+ if (ret < 0) {
dev_err(data->dev, "error checking nvm operation status\n");
return ret;
}
@@ -1386,7 +1382,7 @@ static int bmp580_read_temp(struct bmp280_data *data, int *val, int *val2)
ret = regmap_bulk_read(data->regmap, BMP580_REG_TEMP_XLSB, data->buf,
sizeof(data->buf));
- if (ret) {
+ if (ret < 0) {
dev_err(data->dev, "failed to read temperature\n");
return ret;
}
@@ -1414,7 +1410,7 @@ static int bmp580_read_press(struct bmp280_data *data, int *val, int *val2)
ret = regmap_bulk_read(data->regmap, BMP580_REG_PRESS_XLSB, data->buf,
sizeof(data->buf));
- if (ret) {
+ if (ret < 0) {
dev_err(data->dev, "failed to read pressure\n");
return ret;
}
@@ -1485,7 +1481,7 @@ static int bmp580_nvmem_read(void *priv, unsigned int offset, void *val,
BMP580_MODE_MASK | BMP580_ODR_DEEPSLEEP_DIS,
BMP580_ODR_DEEPSLEEP_DIS |
FIELD_PREP(BMP580_MODE_MASK, BMP580_MODE_SLEEP));
- if (ret) {
+ if (ret < 0) {
dev_err(data->dev, "failed to change sensor to standby mode\n");
goto exit;
}
@@ -1497,18 +1493,18 @@ static int bmp580_nvmem_read(void *priv, unsigned int offset, void *val,
ret = regmap_write(data->regmap, BMP580_REG_NVM_ADDR,
FIELD_PREP(BMP580_NVM_ROW_ADDR_MASK, addr));
- if (ret) {
+ if (ret < 0) {
dev_err(data->dev, "error writing nvm address\n");
goto exit;
}
ret = bmp580_nvm_operation(data, false);
- if (ret)
+ if (ret < 0)
goto exit;
ret = regmap_bulk_read(data->regmap, BMP580_REG_NVM_DATA_LSB,
&data->le16, sizeof(data->le16));
- if (ret) {
+ if (ret < 0) {
dev_err(data->dev, "error reading nvm data regs\n");
goto exit;
}
@@ -1541,7 +1537,7 @@ static int bmp580_nvmem_write(void *priv, unsigned int offset, void *val,
BMP580_MODE_MASK | BMP580_ODR_DEEPSLEEP_DIS,
BMP580_ODR_DEEPSLEEP_DIS |
FIELD_PREP(BMP580_MODE_MASK, BMP580_MODE_SLEEP));
- if (ret) {
+ if (ret < 0) {
dev_err(data->dev, "failed to change sensor to standby mode\n");
goto exit;
}
@@ -1554,7 +1550,7 @@ static int bmp580_nvmem_write(void *priv, unsigned int offset, void *val,
ret = regmap_write(data->regmap, BMP580_REG_NVM_ADDR,
BMP580_NVM_PROG_EN |
FIELD_PREP(BMP580_NVM_ROW_ADDR_MASK, addr));
- if (ret) {
+ if (ret < 0) {
dev_err(data->dev, "error writing nvm address\n");
goto exit;
}
@@ -1562,19 +1558,19 @@ static int bmp580_nvmem_write(void *priv, unsigned int offset, void *val,
ret = regmap_bulk_write(data->regmap, BMP580_REG_NVM_DATA_LSB,
&data->le16, sizeof(data->le16));
- if (ret) {
+ if (ret < 0) {
dev_err(data->dev, "error writing LSB NVM data regs\n");
goto exit;
}
ret = bmp580_nvm_operation(data, true);
- if (ret)
+ if (ret < 0)
goto exit;
/* Disable programming mode bit */
ret = regmap_update_bits(data->regmap, BMP580_REG_NVM_ADDR,
BMP580_NVM_PROG_EN, 0);
- if (ret) {
+ if (ret < 0) {
dev_err(data->dev, "error resetting nvm write\n");
goto exit;
}
@@ -1608,25 +1604,29 @@ static int bmp580_preinit(struct bmp280_data *data)
/* Issue soft-reset command */
ret = bmp580_soft_reset(data);
- if (ret)
+ if (ret < 0)
return ret;
/* Post powerup sequence */
ret = regmap_read(data->regmap, BMP580_REG_CHIP_ID, ®);
- if (ret)
+ if (ret < 0) {
+ dev_err(data->dev, "failed to establish comms with the chip\n");
return ret;
+ }
/* Print warn message if we don't know the chip id */
if (reg != BMP580_CHIP_ID && reg != BMP580_CHIP_ID_ALT)
- dev_warn(data->dev, "preinit: unexpected chip_id\n");
+ dev_warn(data->dev, "unexpected chip_id\n");
ret = regmap_read(data->regmap, BMP580_REG_STATUS, ®);
- if (ret)
+ if (ret < 0) {
+ dev_err(data->dev, "failed to read nvm status\n");
return ret;
+ }
/* Check nvm status */
if (!(reg & BMP580_STATUS_NVM_RDY_MASK) || (reg & BMP580_STATUS_NVM_ERR_MASK)) {
- dev_err(data->dev, "preinit: nvm error on powerup sequence\n");
+ dev_err(data->dev, "nvm error on powerup sequence\n");
return -EIO;
}
@@ -1646,7 +1646,7 @@ static int bmp580_chip_config(struct bmp280_data *data)
BMP580_MODE_MASK | BMP580_ODR_DEEPSLEEP_DIS,
BMP580_ODR_DEEPSLEEP_DIS |
FIELD_PREP(BMP580_MODE_MASK, BMP580_MODE_SLEEP));
- if (ret) {
+ if (ret < 0) {
dev_err(data->dev, "failed to change sensor to standby mode\n");
return ret;
}
@@ -1661,6 +1661,10 @@ static int bmp580_chip_config(struct bmp280_data *data)
BMP580_DSP_COMP_MASK |
BMP580_DSP_SHDW_IIR_TEMP_EN |
BMP580_DSP_SHDW_IIR_PRESS_EN, reg_val);
+ if (ret < 0) {
+ dev_err(data->dev, "failed to change DSP mode settings\n");
+ return ret;
+ }
/* Configure oversampling */
reg_val = FIELD_PREP(BMP580_OSR_TEMP_MASK, data->oversampling_temp) |
@@ -1672,7 +1676,7 @@ static int bmp580_chip_config(struct bmp280_data *data)
BMP580_OSR_PRESS_MASK |
BMP580_OSR_PRESS_EN,
reg_val, &aux);
- if (ret) {
+ if (ret < 0) {
dev_err(data->dev, "failed to write oversampling register\n");
return ret;
}
@@ -1682,7 +1686,7 @@ static int bmp580_chip_config(struct bmp280_data *data)
ret = regmap_update_bits_check(data->regmap, BMP580_REG_ODR_CONFIG, BMP580_ODR_MASK,
FIELD_PREP(BMP580_ODR_MASK, data->sampling_freq),
&aux);
- if (ret) {
+ if (ret < 0) {
dev_err(data->dev, "failed to write ODR configuration register\n");
return ret;
}
@@ -1696,7 +1700,7 @@ static int bmp580_chip_config(struct bmp280_data *data)
BMP580_DSP_IIR_PRESS_MASK |
BMP580_DSP_IIR_TEMP_MASK,
reg_val, &aux);
- if (ret) {
+ if (ret < 0) {
dev_err(data->dev, "failed to write config register\n");
return ret;
}
@@ -1706,7 +1710,7 @@ static int bmp580_chip_config(struct bmp280_data *data)
ret = regmap_write_bits(data->regmap, BMP580_REG_ODR_CONFIG,
BMP580_MODE_MASK,
FIELD_PREP(BMP580_MODE_MASK, BMP580_MODE_NORMAL));
- if (ret) {
+ if (ret < 0) {
dev_err(data->dev, "failed to set normal mode\n");
return ret;
}
@@ -1719,7 +1723,7 @@ static int bmp580_chip_config(struct bmp280_data *data)
* operating in a degraded mode.
*/
ret = regmap_read(data->regmap, BMP580_REG_EFF_OSR, &tmp);
- if (ret) {
+ if (ret < 0) {
dev_err(data->dev,
"error reading effective OSR register\n");
return ret;
@@ -1782,8 +1786,10 @@ static int bmp180_wait_for_eoc(struct bmp280_data *data, u8 ctrl_meas)
reinit_completion(&data->done);
ret = regmap_write(data->regmap, BMP280_REG_CTRL_MEAS, ctrl_meas);
- if (ret)
+ if (ret < 0) {
+ dev_err(data->dev, "failed to write crtl_meas register\n");
return ret;
+ }
if (data->use_eoc) {
/*
@@ -1806,12 +1812,16 @@ static int bmp180_wait_for_eoc(struct bmp280_data *data, u8 ctrl_meas)
}
ret = regmap_read(data->regmap, BMP280_REG_CTRL_MEAS, &ctrl);
- if (ret)
+ if (ret < 0) {
+ dev_err(data->dev, "failed to read ctrl_meas register\n");
return ret;
+ }
/* The value of this bit reset to "0" after conversion is complete */
- if (ctrl & BMP180_MEAS_SCO)
+ if (ctrl & BMP180_MEAS_SCO) {
+ dev_err(data->dev, "conversion didn't complete\n");
return -EIO;
+ }
return 0;
}
@@ -1823,13 +1833,15 @@ static int bmp180_read_adc_temp(struct bmp280_data *data, int *val)
ret = bmp180_wait_for_eoc(data,
FIELD_PREP(BMP180_MEAS_CTRL_MASK, BMP180_MEAS_TEMP) |
BMP180_MEAS_SCO);
- if (ret)
+ if (ret < 0)
return ret;
ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB,
&data->be16, sizeof(data->be16));
- if (ret)
+ if (ret < 0) {
+ dev_err(data->dev, "failed to read temperature\n");
return ret;
+ }
*val = be16_to_cpu(data->be16);
@@ -1844,9 +1856,10 @@ static int bmp180_read_calib(struct bmp280_data *data)
ret = regmap_bulk_read(data->regmap, BMP180_REG_CALIB_START,
data->bmp180_cal_buf, sizeof(data->bmp180_cal_buf));
-
- if (ret < 0)
+ if (ret < 0) {
+ dev_err(data->dev, "failed to read calibration parameters\n");
return ret;
+ }
/* None of the words has the value 0 or 0xFFFF */
for (i = 0; i < ARRAY_SIZE(data->bmp180_cal_buf); i++) {
@@ -1898,7 +1911,7 @@ static int bmp180_read_temp(struct bmp280_data *data, int *val, int *val2)
int ret;
ret = bmp180_read_adc_temp(data, &adc_temp);
- if (ret)
+ if (ret < 0)
return ret;
comp_temp = bmp180_compensate_temp(data, adc_temp);
@@ -1924,13 +1937,15 @@ static int bmp180_read_adc_press(struct bmp280_data *data, int *val)
FIELD_PREP(BMP180_MEAS_CTRL_MASK, BMP180_MEAS_PRESS) |
FIELD_PREP(BMP180_OSRS_PRESS_MASK, oss) |
BMP180_MEAS_SCO);
- if (ret)
+ if (ret < 0)
return ret;
ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB,
data->buf, sizeof(data->buf));
- if (ret)
+ if (ret < 0) {
+ dev_err(data->dev, "failed to read pressure\n");
return ret;
+ }
*val = get_unaligned_be24(data->buf) >> (8 - oss);
@@ -1980,11 +1995,11 @@ static int bmp180_read_press(struct bmp280_data *data, int *val, int *val2)
/* Read and compensate temperature so we get a reading of t_fine. */
ret = bmp180_read_temp(data, NULL, NULL);
- if (ret)
+ if (ret < 0)
return ret;
ret = bmp180_read_adc_press(data, &adc_press);
- if (ret)
+ if (ret < 0)
return ret;
comp_press = bmp180_compensate_press(data, adc_press);
@@ -2062,7 +2077,7 @@ static int bmp085_fetch_eoc_irq(struct device *dev,
irq_trig,
name,
data);
- if (ret) {
+ if (ret < 0) {
/* Bail out without IRQ but keep the driver in place */
dev_err(dev, "unable to request DRDY IRQ\n");
return 0;
@@ -2132,20 +2147,20 @@ int bmp280_common_probe(struct device *dev,
ret = devm_regulator_bulk_get(dev,
BMP280_NUM_SUPPLIES, data->supplies);
- if (ret) {
+ if (ret < 0) {
dev_err(dev, "failed to get regulators\n");
return ret;
}
ret = regulator_bulk_enable(BMP280_NUM_SUPPLIES, data->supplies);
- if (ret) {
+ if (ret < 0) {
dev_err(dev, "failed to enable regulators\n");
return ret;
}
ret = devm_add_action_or_reset(dev, bmp280_regulators_disable,
data->supplies);
- if (ret)
+ if (ret < 0)
return ret;
/* Wait to make sure we started up properly */
@@ -2162,8 +2177,10 @@ int bmp280_common_probe(struct device *dev,
data->regmap = regmap;
ret = regmap_read(regmap, data->chip_info->id_reg, &chip_id);
- if (ret < 0)
+ if (ret < 0) {
+ dev_err(data->dev, "failed to read chip id\n");
return ret;
+ }
for (i = 0; i < data->chip_info->num_chip_id; i++) {
if (chip_id == data->chip_info->chip_id[i]) {
@@ -2177,7 +2194,7 @@ int bmp280_common_probe(struct device *dev,
if (data->chip_info->preinit) {
ret = data->chip_info->preinit(data);
- if (ret)
+ if (ret < 0)
return dev_err_probe(data->dev, ret,
"error running preinit tasks\n");
}
@@ -2208,7 +2225,7 @@ int bmp280_common_probe(struct device *dev,
*/
if (irq > 0 && (chip_id == BMP180_CHIP_ID)) {
ret = bmp085_fetch_eoc_irq(dev, name, irq, data);
- if (ret)
+ if (ret < 0)
return ret;
}
@@ -2225,7 +2242,7 @@ int bmp280_common_probe(struct device *dev,
pm_runtime_put(dev);
ret = devm_add_action_or_reset(dev, bmp280_pm_disable, dev);
- if (ret)
+ if (ret < 0)
return ret;
return devm_iio_device_register(dev, indio_dev);
@@ -2247,7 +2264,7 @@ static int bmp280_runtime_resume(struct device *dev)
int ret;
ret = regulator_bulk_enable(BMP280_NUM_SUPPLIES, data->supplies);
- if (ret)
+ if (ret < 0)
return ret;
usleep_range(data->start_up_time, data->start_up_time + 100);
--
2.25.1
Powered by blists - more mailing lists