[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1613d7e3-a5cc-4b8e-a905-3699779476fe@linaro.org>
Date: Mon, 29 Apr 2024 08:27:44 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Farouk Bouabid <farouk.bouabid@...obroma-systems.com>,
Wolfram Sang <wsa+renesas@...g-engineering.com>,
Peter Rosin <peda@...ntia.se>, Andi Shyti <andi.shyti@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Quentin Schulz <quentin.schulz@...obroma-systems.com>,
Heiko Stuebner <heiko@...ech.de>
Cc: linux-i2c@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org
Subject: Re: [PATCH 2/7] dt-bindings: i2c: mux: mule: add dt-bindings for mule
i2c multiplexer
Except that this was not fully tested few comments.
A nit, subject: drop second/last, redundant "dt-bindings for". The
"dt-bindings" prefix is already stating that these are bindings.
See also:
https://elixir.bootlin.com/linux/v6.7-rc8/source/Documentation/devicetree/bindings/submitting-patches.rst#L18
On 26/04/2024 18:49, Farouk Bouabid wrote:
> This patch adds support for the Mule I2C multiplexer.
Please do not use "This commit/patch/change", but imperative mood. See
longer explanation here:
https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L95
>
> Mule is an mcu that emulates a set of i2c devices which are reacheable
> through an i2c-mux.
>
> The emulated devices share a single i2c address with the mux itself where
> the requested register is what determines which logic is executed (mux or
> device).
>
> Signed-off-by: Farouk Bouabid <farouk.bouabid@...obroma-systems.com>
> ---
> .../devicetree/bindings/i2c/i2c-mux-mule.yaml | 80 ++++++++++++++++++++++
> 1 file changed, 80 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-mule.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-mule.yaml
> new file mode 100644
> index 000000000000..458e4661cbc8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-mule.yaml
Use compatible as filename.
> @@ -0,0 +1,80 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/i2c/i2c-mux-mule.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mule I2C multiplexer
> +
> +maintainers:
> + - Farouk Bouabid <farouk.bouabid@...obroma-systems.com>
> + - Quentin Schulz <quentin.schulz@...obroma-systems.com>
> +
> +description: |
> + Mule is an mcu that emulates a set of i2c devices which are reacheable
typo, reachable
> + through an i2c-mux.
> +
> + The emulated devices share a single i2c address with the mux itself where
> + the requested register is what determines which logic is executed (mux or
> + device)
> +
> + +--------------------------------------------------+
> + | Mule |
> + | +---------------+ |
> + ------+->|Config register|----+ |
> + | | +---------------+ | |
> + | | V_ |
> + | | | \ +--------+ |
> + | | | \-------->| dev #0 | |
> + | | | | +--------+ |
> + | | | M |-------->| dev #1 | |
> + | +--------------------->| U | +--------+ |
> + | | X |-------->| dev #2 | |
> + | | | +--------+ |
> + | | /-------->| dev #3 | |
> + | |__/ +--------+ |
> + +--------------------------------------------------+
> +
> +
> +allOf:
> + - $ref: /schemas/i2c/i2c-mux.yaml#
> +
> +properties:
> + compatible:
> + const: tsd,mule-i2c-mux
> +
> + reg:
> + maxItems: 1
> +
Best regards,
Krzysztof
Powered by blists - more mailing lists