| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240429084422.8369-4-fabio.aiuto@engicam.com>
Date: Mon, 29 Apr 2024 10:44:22 +0200
From: Fabio Aiuto <fabio.aiuto@...icam.com>
To: Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Rob Herring <robh@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: devicetree@...r.kernel.org,
imx@...ts.linux.dev,
linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
Fabio Aiuto <fabio.aiuto@...icam.com>,
Matteo Lisi <matteo.lisi@...icam.com>,
Mirko Ardinghi <mirko.ardinghi@...icam.com>,
Peng Fan <peng.fan@....com>,
Michael Trimarchi <michael@...rulasolutions.com>
Subject: [PATCH v7 3/3] arm64: dts: imx93: Add Engicam i.Core MX93 EDIMM 2.0 Starter Kit
i.Core MX93 is a NXP i.MX93 based SoM by Enigcam which needs to be
mounted on top of Engicam baseboards.
Add support for EDIMM 2.0 Starter Kit hosting i.Core MX93.
Starter Kit main features:
2x LVDS interfaces
HDMI output
Audio out
Mic in
Micro SD card slot
USB 3.0 A port
3x USB 2.0 A port
Gb Ethernet
2x CAN bus, 3x UART interfaces
SIM card slot
M.2 KEY_B slot
Cc: Matteo Lisi <matteo.lisi@...icam.com>
Cc: Mirko Ardinghi <mirko.ardinghi@...icam.com>
Reviewed-by: Peng Fan <peng.fan@....com>
Reviewed-by: Michael Trimarchi <michael@...rulasolutions.com>
Signed-off-by: Fabio Aiuto <fabio.aiuto@...icam.com>
---
v6 ---> v7:
- removed max-frequency property in wifi node
- removed pinctrl-{1,2} in usdhc3 node
v5 ---> v6:
- added property in lpuart5 node
- removed unused sai1 node
- move Cc tag to Reviewed-by tag
v4 ---> v5:
- done some property reorder, indentation fixes, node rename,
drop/add new lines
- added Reviewed-by tag
v3 ---> v4:
- drop wl_reg_on regulator in favor of mmc-pwrseq-simple
- add Cc tag
v2 ---> v3:
- fixed dtschema warnings
- removed regulator-always-on on bt_reg_on
- fixed clock rate assignment on sgtl5000 node
- fixed indentation issue
v1 ---> v2:
- fixed indentation issue
- fixed missing space issue
- improved naming of regulator nodes
- removed unneeded include
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../dts/freescale/imx93-icore-mx93-edimm2.dts | 321 ++++++++++++++++++
2 files changed, 322 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx93-icore-mx93-edimm2.dts
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 045250d0a040..d26c0a458a44 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -226,6 +226,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-tqma8xqp-mba8xx.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-icore-mx93-edimm2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx93-icore-mx93-edimm2.dts b/arch/arm64/boot/dts/freescale/imx93-icore-mx93-edimm2.dts
new file mode 100644
index 000000000000..c22d71cdf7cb
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-icore-mx93-edimm2.dts
@@ -0,0 +1,321 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 NXP
+ * Copyright 2024 Engicam s.r.l.
+ */
+
+/dts-v1/;
+
+#include "imx93-icore-mx93.dtsi"
+
+/ {
+ model = "Engicam i.Core MX93 - EDIMM 2 Starterkit";
+ compatible = "engicam,icore-mx93-edimm2", "engicam,icore-mx93",
+ "fsl,imx93";
+
+ aliases {
+ rtc1 = &bbnsm_rtc;
+ };
+
+ chosen {
+ stdout-path = &lpuart1;
+ };
+
+ bt_reg_on: regulator-btregon {
+ compatible = "regulator-gpio";
+ regulator-name = "BT_REG_ON";
+ regulator-min-microvolt = <100000>;
+ regulator-max-microvolt = <3300000>;
+ states = <3300000 0x1>, <100000 0x0>;
+ gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_1v8_sgtl: regulator-1v8-sgtl {
+ compatible = "regulator-fixed";
+ regulator-name = "1v8_sgtl";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ reg_3v3_avdd_sgtl: regulator-3v3-avdd-sgtl {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3_avdd_sgtl";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_3v3_sgtl: regulator-3v3-sgtl {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3_sgtl";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ linux,cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ alloc-ranges = <0 0x80000000 0 0x40000000>;
+ size = <0 0x10000000>;
+ linux,cma-default;
+ };
+
+ rsc_table: rsc-table@...1f000 {
+ reg = <0 0x2021f000 0 0x1000>;
+ no-map;
+ };
+
+ vdevbuffer: vdevbuffer@...20000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0xa4020000 0 0x100000>;
+ no-map;
+ };
+
+ vdev0vring0: vdev0vring0@...00000 {
+ reg = <0 0xa4000000 0 0x8000>;
+ no-map;
+ };
+
+ vdev0vring1: vdev0vring1@...08000 {
+ reg = <0 0xa4008000 0 0x8000>;
+ no-map;
+ };
+
+ vdev1vring0: vdev1vring0@...00000 {
+ reg = <0 0xa4010000 0 0x8000>;
+ no-map;
+ };
+
+ vdev1vring1: vdev1vring1@...18000 {
+ reg = <0 0xa4018000 0 0x8000>;
+ no-map;
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "imx93-sgtl5000";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&dailink_master>;
+ simple-audio-card,frame-master = <&dailink_master>;
+ /*simple-audio-card,mclk-fs = <1>;*/
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai3>;
+ };
+
+ dailink_master: simple-audio-card,codec {
+ sound-dai = <&sgtl5000>;
+ clocks = <&clk IMX93_CLK_SAI3_IPG>;
+ };
+ };
+
+ usdhc3_pwrseq: usdhc3-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3_pwrseq>;
+ reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&cm33 {
+ mbox-names = "tx", "rx", "rxdb";
+ mboxes = <&mu1 0 1>,
+ <&mu1 1 1>,
+ <&mu1 3 1>;
+ memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
+ <&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
+ status = "okay";
+};
+
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ fsl,stop-mode = <&aonmix_ns_gpr 0x10 4>;
+ status = "okay";
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ fsl,stop-mode = <&aonmix_ns_gpr 0x10 4>;
+ status = "okay";
+};
+
+&lpi2c1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_lpi2c1>;
+ pinctrl-1 = <&pinctrl_lpi2c1>;
+ status = "okay";
+
+ sgtl5000: audio-codec@a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ #sound-dai-cells = <0>;
+ clocks = <&clk IMX93_CLK_SAI3_GATE>;
+ VDDA-supply = <®_3v3_avdd_sgtl>;
+ VDDIO-supply = <®_3v3_sgtl>;
+ VDDD-supply = <®_1v8_sgtl>;
+ status = "okay";
+ };
+
+ pcf8523: rtc@68 {
+ compatible = "nxp,pcf8523";
+ reg = <0x68>;
+ };
+};
+
+&lpuart1 { /* console */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&lpuart5 { /* RS485 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&lpuart8 { /* RS232 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart8>;
+ status = "okay";
+};
+
+&micfil {
+ #sound-dai-cells = <0>;
+ assigned-clocks = <&clk IMX93_CLK_PDM>;
+ assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
+ assigned-clock-rates = <196608000>;
+ status = "okay";
+};
+
+&mu1 {
+ status = "okay";
+};
+
+&mu2 {
+ status = "okay";
+};
+
+&sai3 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai3>;
+ assigned-clocks = <&clk IMX93_CLK_SAI3>;
+ assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
+ assigned-clock-rates = <24576000>;
+ fsl,sai-mclk-direction-output;
+ status = "okay";
+};
+
+&usdhc3 { /* WiFi */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ mmc-pwrseq = <&usdhc3_pwrseq>;
+ bus-width = <4>;
+ no-1-8-v;
+ non-removable;
+ status = "okay";
+
+ brcmf: bcrmf@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+ };
+};
+
+&wdog3 {
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_bluetooth: bluetoothgrp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO19__GPIO2_IO19 0x31e /* BT_REG_ON */
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX93_PAD_PDM_CLK__CAN1_TX 0x139e
+ MX93_PAD_PDM_BIT_STREAM0__CAN1_RX 0x139e
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO25__CAN2_TX 0x139e
+ MX93_PAD_GPIO_IO27__CAN2_RX 0x139e
+ >;
+ };
+
+ pinctrl_lpi2c1: lpi2c1grp {
+ fsl,pins = <
+ MX93_PAD_I2C1_SCL__LPI2C1_SCL 0x40000b9e
+ MX93_PAD_I2C1_SDA__LPI2C1_SDA 0x40000b9e
+ >;
+ };
+
+ pinctrl_sai3: sai3grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO26__SAI3_TX_SYNC 0x31e
+ MX93_PAD_GPIO_IO16__SAI3_TX_BCLK 0x31e
+ MX93_PAD_GPIO_IO17__SAI3_MCLK 0x31e
+ MX93_PAD_GPIO_IO21__SAI3_TX_DATA00 0x31e
+ MX93_PAD_GPIO_IO20__SAI3_RX_DATA00 0x31e
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX93_PAD_UART1_RXD__LPUART1_RX 0x31e
+ MX93_PAD_UART1_TXD__LPUART1_TX 0x31e
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO01__LPUART5_RX 0x31e
+ MX93_PAD_GPIO_IO00__LPUART5_TX 0x31e
+ MX93_PAD_GPIO_IO02__LPUART5_CTS_B 0x31e
+ >;
+ };
+
+ pinctrl_uart8: uart8grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO13__LPUART8_RX 0x31e
+ MX93_PAD_GPIO_IO12__LPUART8_TX 0x31e
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX93_PAD_SD3_CLK__USDHC3_CLK 0x17fe
+ MX93_PAD_SD3_CMD__USDHC3_CMD 0x13fe
+ MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x13fe
+ MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x13fe
+ MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x13fe
+ MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x13fe
+ >;
+ };
+
+ pinctrl_usdhc3_pwrseq: usdhc3pwrseqgrp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO22__GPIO2_IO22 0x31e /* WL_REG_ON */
+ >;
+ };
+};
--
2.34.1
Powered by blists - more mailing lists