[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1cf7f439-45cc-42cb-b707-4c87c00015ac@linaro.org>
Date: Mon, 29 Apr 2024 12:31:28 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Chintan Vankar <c-vankar@...com>, Conor Dooley <conor+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Rob Herring <robh@...nel.org>, Tero Kristo <kristo@...nel.org>,
Vignesh Raghavendra <vigneshr@...com>, Nishanth Menon <nm@...com>
Cc: linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, s-vadapalli@...com
Subject: Re: [PATCH v6 5/5] arm64: dts: ti: k3-j784s4: Add overlay for dual
port USXGMII mode
On 29/03/2024 06:31, Chintan Vankar wrote:
> From: Siddharth Vadapalli <s-vadapalli@...com>
>
> The CPSW9G instance of the CPSW Ethernet Switch supports USXGMII mode
> with MAC Ports 1 and 2 of the instance, which are connected to ENET
> Expansion 1 and ENET Expansion 2 slots on the EVM respectively, through
> the Serdes2 instance of the SERDES.
>
> Enable CPSW9G MAC Ports 1 and 2 in fixed-link configuration USXGMII mode
> at 5 Gbps each.
>
> Signed-off-by: Siddharth Vadapalli <s-vadapalli@...com>
> Signed-off-by: Chintan Vankar <c-vankar@...com>
> ---
>
> Link to v5:
> https://lore.kernel.org/r/20240314072129.1520475-6-c-vankar@ti.com/
>
> Changes from v5 to v6:
> - Updated order of properties in Device Nodes based on
> https://docs.kernel.org/devicetree/bindings/dts-coding-style.html#order-of-properties-in-device-node
>
> arch/arm64/boot/dts/ti/Makefile | 6 +-
> .../ti/k3-j784s4-evm-usxgmii-exp1-exp2.dtso | 81 +++++++++++++++++++
> 2 files changed, 86 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm64/boot/dts/ti/k3-j784s4-evm-usxgmii-exp1-exp2.dtso
>
> diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
> index f8e47278df43..2d798ef415e4 100644
> --- a/arch/arm64/boot/dts/ti/Makefile
> +++ b/arch/arm64/boot/dts/ti/Makefile
> @@ -101,6 +101,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j722s-evm.dtb
> dtb-$(CONFIG_ARCH_K3) += k3-am69-sk.dtb
> dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm.dtb
> dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm-quad-port-eth-exp1.dtbo
> +dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm-usxgmii-exp1-exp2.dtbo
>
> # Build time test only, enabled by CONFIG_OF_ALL_DTBS
> k3-am625-beagleplay-csi2-ov5640-dtbs := k3-am625-beagleplay.dtb \
> @@ -148,6 +149,8 @@ k3-j721s2-evm-pcie1-ep-dtbs := k3-j721s2-common-proc-board.dtb \
> k3-j721s2-evm-pcie1-ep.dtbo
> k3-j784s4-evm-quad-port-eth-exp1-dtbs := k3-j784s4-evm.dtb \
> k3-j784s4-evm-quad-port-eth-exp1.dtbo
> +k3-j784s4-evm-usxgmii-exp1-exp2.dtbs := k3-j784s4-evm.dtb \
> + k3-j784s4-evm-usxgmii-exp1-exp2.dtbo\
I have doubts this commit was ever built. It clearly fails, just like
now linux-next fails.
Best regards,
Krzysztof
Powered by blists - more mailing lists