lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Tue, 30 Apr 2024 19:29:43 +0300
From: Alisa-Dariana Roman <alisadariana@...il.com>
To: michael.hennerich@...log.com,
	linux-iio@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org
Cc: alexandru.tachici@...log.com,
	lars@...afoo.de,
	Michael.Hennerich@...log.com,
	jic23@...nel.org,
	robh@...nel.org,
	krzysztof.kozlowski+dt@...aro.org,
	conor+dt@...nel.org,
	lgirdwood@...il.com,
	broonie@...nel.org,
	andy@...nel.org,
	nuno.sa@...log.com,
	marcelo.schmitt@...log.com,
	bigunclemax@...il.com,
	dlechner@...libre.com,
	okan.sahin@...log.com,
	fr0st61te@...il.com,
	alisa.roman@...log.com,
	marcus.folkesson@...il.com,
	schnelle@...ux.ibm.com,
	liambeguin@...il.com
Subject: [PATCH v7 3/6] iio: adc: ad7192: Add aincom supply

AINCOM should actually be a supply. AINx inputs are referenced to AINCOM
in pseudo-differential operation mode. AINCOM voltage represents the
offset of corresponding channels.

Signed-off-by: Alisa-Dariana Roman <alisa.roman@...log.com>
---
 drivers/iio/adc/ad7192.c | 41 ++++++++++++++++++++++++++++++++++++++--
 1 file changed, 39 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c
index ace81e3817a1..3e797ff48086 100644
--- a/drivers/iio/adc/ad7192.c
+++ b/drivers/iio/adc/ad7192.c
@@ -20,6 +20,7 @@
 #include <linux/module.h>
 #include <linux/mod_devicetable.h>
 #include <linux/property.h>
+#include <linux/units.h>
 
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
@@ -186,6 +187,7 @@ struct ad7192_state {
 	struct regulator		*vref;
 	struct clk			*mclk;
 	u16				int_vref_mv;
+	u32				aincom_mv;
 	u32				fclk;
 	u32				mode;
 	u32				conf;
@@ -742,10 +744,19 @@ static int ad7192_read_raw(struct iio_dev *indio_dev,
 			*val = -(1 << (chan->scan_type.realbits - 1));
 		else
 			*val = 0;
+		switch (chan->type) {
+		case IIO_VOLTAGE:
+			if (st->aincom_mv && !chan->differential)
+				*val += DIV_ROUND_CLOSEST_ULL((u64)st->aincom_mv * NANO,
+							      st->scale_avail[gain][1]);
+			return IIO_VAL_INT;
 		/* Kelvin to Celsius */
-		if (chan->type == IIO_TEMP)
+		case IIO_TEMP:
 			*val -= 273 * ad7192_get_temp_scale(unipolar);
-		return IIO_VAL_INT;
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
 	case IIO_CHAN_INFO_SAMP_FREQ:
 		*val = DIV_ROUND_CLOSEST(ad7192_get_f_adc(st), 1024);
 		return IIO_VAL_INT;
@@ -1052,6 +1063,7 @@ static int ad7192_probe(struct spi_device *spi)
 {
 	struct ad7192_state *st;
 	struct iio_dev *indio_dev;
+	struct regulator *aincom;
 	int ret;
 
 	if (!spi->irq) {
@@ -1067,6 +1079,31 @@ static int ad7192_probe(struct spi_device *spi)
 
 	mutex_init(&st->lock);
 
+	/*
+	 * Regulator aincom is optional to maintain compatibility with older DT.
+	 * Newer firmware should provide a zero volt fixed supply if wired to
+	 * ground.
+	 */
+	aincom = devm_regulator_get_optional(&spi->dev, "aincom");
+	if (IS_ERR(aincom)) {
+		st->aincom_mv = 0;
+	} else {
+		ret = regulator_enable(aincom);
+		if (ret)
+			return dev_err_probe(&spi->dev, ret,
+					     "Failed to enable specified AINCOM supply\n");
+
+		ret = devm_add_action_or_reset(&spi->dev, ad7192_reg_disable, aincom);
+		if (ret)
+			return ret;
+
+		ret = regulator_get_voltage(aincom);
+		if (ret < 0)
+			return dev_err_probe(&spi->dev, ret,
+					     "Device tree error, AINCOM voltage undefined\n");
+		st->aincom_mv = ret / 1000;
+	}
+
 	st->avdd = devm_regulator_get(&spi->dev, "avdd");
 	if (IS_ERR(st->avdd))
 		return PTR_ERR(st->avdd);
-- 
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ