| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 30 Apr 2024 15:00:22 +0300
From: Matti Vaittinen <mazziesaccount@...il.com>
To: Matti Vaittinen <mazziesaccount@...il.com>,
Matti Vaittinen <matti.vaittinen@...rohmeurope.com>
Cc: Lee Jones <lee@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Matti Vaittinen <mazziesaccount@...il.com>,
Wim Van Sebroeck <wim@...ux-watchdog.org>,
Guenter Roeck <linux@...ck-us.net>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-watchdog@...r.kernel.org
Subject: [PATCH v1 2/6] dt-bindings: mfd: bd96801 PMIC core
ROHM BD96801 is a highly configurable automotive grade PMIC. Introduce
DT bindings for the BD96801 core.
Signed-off-by: Matti Vaittinen <mazziesaccount@...il.com>
---
Revision history:
RFCv2 => v1
- minor cleaning
- add timeout-sec
RFCv1 => RFCv2:
- Document rohm,hw-timeout-ms
- Document rohm,wdg-action
---
.../bindings/mfd/rohm,bd96801-pmic.yaml | 172 ++++++++++++++++++
1 file changed, 172 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml
new file mode 100644
index 000000000000..fce338681302
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml
@@ -0,0 +1,172 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rohm,bd96801-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD96801 Scalable Power Management Integrated Circuit
+
+maintainers:
+ - Matti Vaittinen <matti.vaittinen@...rohmeurope.com>
+
+description:
+ BD96801 is an automotive grade single-chip power management IC.
+ It integrates 4 buck converters and 3 LDOs with safety features like
+ over-/under voltage and over current detection and a watchdog.
+
+properties:
+ compatible:
+ const: rohm,bd96801
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description:
+ The PMIC provides intb and errb IRQ lines. The errb IRQ line is used
+ for fatal IRQs which will cause the PMIC to shut down power outputs.
+ In many systems this will shut down the SoC contolling the PMIC and
+ connecting/handling the errb can be omitted. However, there are cases
+ where the SoC is not powered by the PMIC. In that case it may be
+ useful to connect the errb and handle errb events.
+ minItems: 1
+ maxItems: 2
+
+ interrupt-names:
+ minItems: 1
+ items:
+ - enum: [intb, errb]
+ - const: errb
+
+ rohm,hw-timeout-ms:
+ description:
+ Watchdog timeout value(s). First walue is timeout limit. Second value is
+ optional value for 'too early' watchdog ping if window timeout mode is
+ to be used.
+ minItems: 1
+ maxItems: 2
+
+ rohm,wdg-action:
+ description:
+ Whether the watchdog failure must turn off the regulator power outputs or
+ just toggle the INTB line.
+ enum:
+ - prstb
+ - intb-only
+
+ timeout-sec:
+ maxItems: 2
+
+ regulators:
+ $ref: /schemas/regulator/rohm,bd96801-regulator.yaml
+ description:
+ List of child nodes that specify the regulators.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - regulators
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/leds/common.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pmic: pmic@60 {
+ reg = <0x60>;
+ compatible = "rohm,bd96801";
+ interrupt-parent = <&gpio1>;
+ interrupts = <29 IRQ_TYPE_LEVEL_LOW>, <6 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "intb", "errb";
+
+ regulators {
+ buck1: BUCK1 {
+ regulator-name = "buck1";
+ regulator-ramp-delay = <1250>;
+ /* 0.5V min INITIAL - 150 mV tune */
+ regulator-min-microvolt = <350000>;
+ /* 3.3V + 150mV tune */
+ regulator-max-microvolt = <3450000>;
+
+ /* These can be set only when PMIC is in STBY */
+ rohm,initial-voltage-microvolt = <500000>;
+ regulator-ov-error-microvolt = <230000>;
+ regulator-uv-error-microvolt = <230000>;
+ regulator-temp-protection-kelvin = <1>;
+ regulator-temp-warn-kelvin = <0>;
+ };
+ buck2: BUCK2 {
+ regulator-name = "buck2";
+ regulator-min-microvolt = <350000>;
+ regulator-max-microvolt = <3450000>;
+
+ rohm,initial-voltage-microvolt = <3000000>;
+ regulator-ov-error-microvolt = <18000>;
+ regulator-uv-error-microvolt = <18000>;
+ regulator-temp-protection-kelvin = <1>;
+ regulator-temp-warn-kelvin = <1>;
+ };
+ buck3: BUCK3 {
+ regulator-name = "buck3";
+ regulator-min-microvolt = <350000>;
+ regulator-max-microvolt = <3450000>;
+
+ rohm,initial-voltage-microvolt = <600000>;
+ regulator-ov-warn-microvolt = <18000>;
+ regulator-uv-warn-microvolt = <18000>;
+ regulator-temp-protection-kelvin = <1>;
+ regulator-temp-error-kelvin = <0>;
+ };
+ buck4: BUCK4 {
+ regulator-name = "buck4";
+ regulator-min-microvolt = <350000>;
+ regulator-max-microvolt = <3450000>;
+
+ rohm,initial-voltage-microvolt = <600000>;
+ regulator-ov-warn-microvolt = <18000>;
+ regulator-uv-warn-microvolt = <18000>;
+ regulator-temp-protection-kelvin = <1>;
+ regulator-temp-error-kelvin = <0>;
+ };
+ ldo5: LDO5 {
+ regulator-name = "ldo5";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <3300000>;
+
+ rohm,initial-voltage-microvolt = <500000>;
+ regulator-ov-error-microvolt = <36000>;
+ regulator-uv-error-microvolt = <34000>;
+ regulator-temp-protection-kelvin = <1>;
+ regulator-temp-warn-kelvin = <0>;
+ };
+ ldo6: LDO6 {
+ regulator-name = "ldo6";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <3300000>;
+
+ rohm,initial-voltage-microvolt = <300000>;
+ regulator-ov-error-microvolt = <36000>;
+ regulator-uv-error-microvolt = <34000>;
+ regulator-temp-protection-kelvin = <1>;
+ regulator-temp-warn-kelvin = <0>;
+ };
+ ldo7: LDO7 {
+ regulator-name = "ldo7";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <3300000>;
+
+ rohm,initial-voltage-microvolt = <500000>;
+ regulator-ov-error-microvolt = <36000>;
+ regulator-uv-error-microvolt = <34000>;
+ regulator-temp-protection-kelvin = <1>;
+ regulator-temp-warn-kelvin = <0>;
+ };
+ };
+ };
+ };
--
2.44.0
--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND
~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]
Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)
Powered by blists - more mailing lists