[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240501-usb-phy-gs101-v2-5-ed9f14a1bd6d@linaro.org>
Date: Wed, 01 May 2024 10:19:40 +0100
From: André Draszik <andre.draszik@...aro.org>
To: Vinod Koul <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Peter Griffin <peter.griffin@...aro.org>,
Marek Szyprowski <m.szyprowski@...sung.com>,
Sylwester Nawrocki <s.nawrocki@...sung.com>,
Alim Akhtar <alim.akhtar@...sung.com>,
Sam Protsenko <semen.protsenko@...aro.org>
Cc: Krzysztof Kozlowski <krzk@...nel.org>,
Tudor Ambarus <tudor.ambarus@...aro.org>,
Will McVicker <willmcvicker@...gle.com>, Roy Luo <royluo@...gle.com>,
kernel-team@...roid.com, linux-phy@...ts.infradead.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-samsung-soc@...r.kernel.org,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Arnd Bergmann <arnd@...db.de>, lee@...nel.org,
André Draszik <andre.draszik@...aro.org>
Subject: [PATCH v2 5/7] phy: exynos5-usbdrd: uniform order of register bit
macros
Most of the macros are ordered high -> low, but there are some
outliers.
Order them all uniformly from high to low. This will allow adding
additional register (field) definitions in a consistent way.
While at it, also remove some extra empty lines to group register bit
field definitions together with the relevant register. This makes the
registers easier to distinguish visually.
No functional change.
Signed-off-by: André Draszik <andre.draszik@...aro.org>
---
drivers/phy/samsung/phy-exynos5-usbdrd.c | 44 +++++++++++---------------------
1 file changed, 15 insertions(+), 29 deletions(-)
diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c
index 4f30ced439b9..200285fa823b 100644
--- a/drivers/phy/samsung/phy-exynos5-usbdrd.c
+++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c
@@ -36,13 +36,11 @@
/* Exynos5: USB 3.0 DRD PHY registers */
#define EXYNOS5_DRD_LINKSYSTEM 0x04
-
+#define LINKSYSTEM_XHCI_VERSION_CONTROL BIT(27)
#define LINKSYSTEM_FLADJ_MASK (0x3f << 1)
#define LINKSYSTEM_FLADJ(_x) ((_x) << 1)
-#define LINKSYSTEM_XHCI_VERSION_CONTROL BIT(27)
#define EXYNOS5_DRD_PHYUTMI 0x08
-
#define PHYUTMI_OTGDISABLE BIT(6)
#define PHYUTMI_FORCESUSPEND BIT(1)
#define PHYUTMI_FORCESLEEP BIT(0)
@@ -50,40 +48,31 @@
#define EXYNOS5_DRD_PHYPIPE 0x0c
#define EXYNOS5_DRD_PHYCLKRST 0x10
-
#define PHYCLKRST_EN_UTMISUSPEND BIT(31)
-
#define PHYCLKRST_SSC_REFCLKSEL_MASK (0xff << 23)
#define PHYCLKRST_SSC_REFCLKSEL(_x) ((_x) << 23)
-
#define PHYCLKRST_SSC_RANGE_MASK (0x03 << 21)
#define PHYCLKRST_SSC_RANGE(_x) ((_x) << 21)
-
#define PHYCLKRST_SSC_EN BIT(20)
#define PHYCLKRST_REF_SSP_EN BIT(19)
#define PHYCLKRST_REF_CLKDIV2 BIT(18)
-
#define PHYCLKRST_MPLL_MULTIPLIER_MASK (0x7f << 11)
#define PHYCLKRST_MPLL_MULTIPLIER_100MHZ_REF (0x19 << 11)
#define PHYCLKRST_MPLL_MULTIPLIER_50M_REF (0x32 << 11)
#define PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF (0x68 << 11)
#define PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF (0x7d << 11)
#define PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF (0x02 << 11)
-
-#define PHYCLKRST_FSEL_UTMI_MASK (0x7 << 5)
#define PHYCLKRST_FSEL_PIPE_MASK (0x7 << 8)
+#define PHYCLKRST_FSEL_UTMI_MASK (0x7 << 5)
#define PHYCLKRST_FSEL(_x) ((_x) << 5)
#define PHYCLKRST_FSEL_PAD_100MHZ (0x27 << 5)
#define PHYCLKRST_FSEL_PAD_24MHZ (0x2a << 5)
#define PHYCLKRST_FSEL_PAD_20MHZ (0x31 << 5)
#define PHYCLKRST_FSEL_PAD_19_2MHZ (0x38 << 5)
-
#define PHYCLKRST_RETENABLEN BIT(4)
-
#define PHYCLKRST_REFCLKSEL_MASK (0x03 << 2)
#define PHYCLKRST_REFCLKSEL_PAD_REFCLK (0x2 << 2)
#define PHYCLKRST_REFCLKSEL_EXT_REFCLK (0x3 << 2)
-
#define PHYCLKRST_PORTRESET BIT(1)
#define PHYCLKRST_COMMONONN BIT(0)
@@ -101,30 +90,27 @@
#define PHYREG1_CR_ACK BIT(0)
#define EXYNOS5_DRD_PHYPARAM0 0x1c
-
#define PHYPARAM0_REF_USE_PAD BIT(31)
#define PHYPARAM0_REF_LOSLEVEL_MASK (0x1f << 26)
#define PHYPARAM0_REF_LOSLEVEL (0x9 << 26)
#define EXYNOS5_DRD_PHYPARAM1 0x20
-
#define PHYPARAM1_PCS_TXDEEMPH_MASK (0x1f << 0)
#define PHYPARAM1_PCS_TXDEEMPH (0x1c)
#define EXYNOS5_DRD_PHYTERM 0x24
#define EXYNOS5_DRD_PHYTEST 0x28
-
#define PHYTEST_POWERDOWN_SSP BIT(3)
#define PHYTEST_POWERDOWN_HSP BIT(2)
#define EXYNOS5_DRD_PHYADP 0x2c
#define EXYNOS5_DRD_PHYUTMICLKSEL 0x30
-
#define PHYUTMICLKSEL_UTMI_CLKSEL BIT(2)
#define EXYNOS5_DRD_PHYRESUME 0x34
+
#define EXYNOS5_DRD_LINKPORT 0x44
/* USB 3.0 DRD PHY SS Function Control Reg; accessed by CR_PORT */
@@ -148,31 +134,31 @@
/* Exynos850: USB DRD PHY registers */
#define EXYNOS850_DRD_LINKCTRL 0x04
-#define LINKCTRL_BUS_FILTER_BYPASS(_x) ((_x) << 4)
#define LINKCTRL_FORCE_QACT BIT(8)
+#define LINKCTRL_BUS_FILTER_BYPASS(_x) ((_x) << 4)
#define EXYNOS850_DRD_CLKRST 0x20
-#define CLKRST_LINK_SW_RST BIT(0)
-#define CLKRST_PORT_RST BIT(1)
#define CLKRST_PHY_SW_RST BIT(3)
+#define CLKRST_PORT_RST BIT(1)
+#define CLKRST_LINK_SW_RST BIT(0)
#define EXYNOS850_DRD_SSPPLLCTL 0x30
#define SSPPLLCTL_FSEL GENMASK(2, 0)
#define EXYNOS850_DRD_UTMI 0x50
-#define UTMI_FORCE_SLEEP BIT(0)
-#define UTMI_FORCE_SUSPEND BIT(1)
-#define UTMI_DM_PULLDOWN BIT(2)
-#define UTMI_DP_PULLDOWN BIT(3)
-#define UTMI_FORCE_BVALID BIT(4)
#define UTMI_FORCE_VBUSVALID BIT(5)
+#define UTMI_FORCE_BVALID BIT(4)
+#define UTMI_DP_PULLDOWN BIT(3)
+#define UTMI_DM_PULLDOWN BIT(2)
+#define UTMI_FORCE_SUSPEND BIT(1)
+#define UTMI_FORCE_SLEEP BIT(0)
#define EXYNOS850_DRD_HSP 0x54
-#define HSP_COMMONONN BIT(8)
-#define HSP_EN_UTMISUSPEND BIT(9)
-#define HSP_VBUSVLDEXT BIT(12)
-#define HSP_VBUSVLDEXTSEL BIT(13)
#define HSP_FSV_OUT_EN BIT(24)
+#define HSP_VBUSVLDEXTSEL BIT(13)
+#define HSP_VBUSVLDEXT BIT(12)
+#define HSP_EN_UTMISUSPEND BIT(9)
+#define HSP_COMMONONN BIT(8)
#define EXYNOS850_DRD_HSP_TEST 0x5c
#define HSP_TEST_SIDDQ BIT(24)
--
2.45.0.rc0.197.gbae5840b3b-goog
Powered by blists - more mailing lists