[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <47665254-fe22-4369-8b10-087ca928e97f@gmail.com>
Date: Wed, 1 May 2024 10:37:20 -0500
From: mr.nuke.me@...il.com
To: Krzysztof Kozlowski <krzk@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof WilczyĆski <kw@...ux.com>,
Rob Herring <robh@...nel.org>, Bjorn Helgaas <bhelgaas@...gle.com>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
<conor+dt@...nel.org>, Vinod Koul <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Michael Turquette <mturquette@...libre.com>, Stephen Boyd
<sboyd@...nel.org>, Manivannan Sadhasivam
<manivannan.sadhasivam@...aro.org>, linux-arm-msm@...r.kernel.org,
linux-pci@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-phy@...ts.infradead.org,
linux-clk@...r.kernel.org
Subject: Re: [PATCH v4 RESEND 0/8] ipq9574: Enable PCI-Express support
On 5/1/24 5:22 AM, Krzysztof Kozlowski wrote:
> On 01/05/2024 06:28, Alexandru Gagniuc wrote:
>> There are four PCIe ports on IPQ9574, pcie0 thru pcie3. This series
>> addresses pcie2, which is a gen3x2 port. The board I have only uses
>> pcie2, and that's the only one enabled in this series. pcie3 is added
>> as a special request, but is untested.
>>
>> I believe this makes sense as a monolithic series, as the individual
>> pieces are not that useful by themselves.
>>
>> In v2, I've had some issues regarding the dt schema checks. For
>> transparency, I used the following test invocations to test:
>>
>> make dt_binding_check DT_SCHEMA_FILES=qcom,pcie.yaml:qcom,ipq8074-qmp-pcie-phy.yaml
>> make dtbs_check DT_SCHEMA_FILES=qcom,pcie.yaml:qcom,ipq8074-qmp-pcie-phy.yaml
>>
>> Changes since v3:
>> - "const"ify .hw.init fields for the PCIE pipe clocks
>> - Used pciephy_v5_regs_layout instead of v4 in phy-qcom-qmp-pcie.c
>> - Included Manivannan's patch for qcom-pcie.c clocks
>> - Dropped redundant comments in "ranges" and "interrupt-map" of pcie2.
>> - Added pcie3 and pcie3_phy dts nodes
>> - Moved snoc and anoc clocks to PCIe controller from PHY
>>
>
> Three postings within short time... Allow people to actually review your
> code. Please wait 24h before posting new version. Include entire
> feedback and all tags. Explain why you ignore/skip some tags.
>
I'm sorry for the confusion. It's the same patch version, v3 being two
weeks old.
Due to a tooling failure, the first attempt to send resulted in a
double-posting, and missing cover letter. It was so bad that I felt I
needed to re-post with the RESEND tag to clarify the intent and prevent
further confusion.
Alex
>
Powered by blists - more mailing lists