[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <003301da9c7e$e28cedb0$a7a6c910$@emc.com.tw>
Date: Thu, 2 May 2024 18:52:54 +0800
From: "Phoenix" <phoenix@....com.tw>
To: "'Dmitry Torokhov'" <dmitry.torokhov@...il.com>,
"'Jonathan Denose'" <jdenose@...gle.com>
Cc: "'LKML'" <linux-kernel@...r.kernel.org>,
<linux-input@...r.kernel.org>,
"'Greg Kroah-Hartman'" <gregkh@...uxfoundation.org>,
"'Jeffery Miller'" <jefferymiller@...gle.com>,
"'Hans de Goede'" <hdegoede@...hat.com>,
"'Josh.Chen'" <josh.chen@....com.tw>,
<jingle.wu@....com.tw>
Subject: RE: [PATCH] Input: elantech - fix touchpad state on resume for Lenovo N24
Loop Josh, Jingle
-----Original Message-----
From: Dmitry Torokhov <dmitry.torokhov@...il.com>
Sent: Thursday, May 2, 2024 3:20 AM
To: Jonathan Denose <jdenose@...gle.com>
Cc: LKML <linux-kernel@...r.kernel.org>; linux-input@...r.kernel.org; Greg
Kroah-Hartman <gregkh@...uxfoundation.org>; Jeffery Miller
<jefferymiller@...gle.com>; Phoenix Huang <phoenix@....com.tw>; Hans de
Goede <hdegoede@...hat.com>
Subject: Re: [PATCH] Input: elantech - fix touchpad state on resume for
Lenovo N24
On Wed, May 01, 2024 at 02:02:32PM +0000, Jonathan Denose wrote:
> The Lenovo N24 on resume becomes stuck in a state where it sends
> incorrect packets, causing elantech_packet_check_v4 to fail.
> The only way for the device to resume sending the correct packets is
> for it to be disabled and then re-enabled.
>
> This change adds a dmi check to trigger this behavior on resume.
> Signed-off-by: Jonathan Denose <jdenose@...gle.com>
Adding a couple more folks to take a look at this...
> ---
>
> drivers/input/mouse/elantech.c | 33 +++++++++++++++++++++++++++++++++
> 1 file changed, 33 insertions(+)
>
> diff --git a/drivers/input/mouse/elantech.c
> b/drivers/input/mouse/elantech.c index 4e38229404b4b..e0f3095b4227e
> 100644
> --- a/drivers/input/mouse/elantech.c
> +++ b/drivers/input/mouse/elantech.c
> @@ -1476,6 +1476,23 @@ static void elantech_disconnect(struct psmouse
*psmouse)
> psmouse->private = NULL;
> }
>
> +/*
> + * Some hw_version 4 models fail to properly activate absolute mode
> +on
> + * resume without going through disable/enable cycle.
> + */
> +static const struct dmi_system_id elantech_needs_reenable[] = { #if
> +defined(CONFIG_DMI) && defined(CONFIG_X86)
> + {
> + /* Lenovo N24 */
> + .matches = {
> + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
> + DMI_MATCH(DMI_PRODUCT_NAME, "81AF"),
> + },
> + },
> +#endif
> + { }
> +};
> +
> /*
> * Put the touchpad back into absolute mode when reconnecting
> */
> @@ -1486,6 +1503,22 @@ static int elantech_reconnect(struct psmouse
*psmouse)
> if (elantech_detect(psmouse, 0))
> return -1;
>
> + if (dmi_check_system(elantech_needs_reenable)) {
> + int err;
> +
> + err = ps2_sendbyte(&psmouse->ps2dev, PSMOUSE_CMD_DISABLE,
NULL);
> +
> + if (err)
> + psmouse_warn(psmouse, "Failed to deactivate mouse on
%s: %d\n",
> + psmouse->ps2dev.serio->phys, err);
> +
> + err = ps2_sendbyte(&psmouse->ps2dev, PSMOUSE_CMD_ENABLE,
NULL);
> +
> + if (err)
> + psmouse_warn(psmouse, "Failed to reactivate mouse on
%s: %d\n",
> + psmouse->ps2dev.serio->phys, err);
> + }
> +
> if (elantech_set_absolute_mode(psmouse)) {
> psmouse_err(psmouse,
> "failed to put touchpad back into absolute
mode.\n");
> --
> 2.45.0.rc0.197.gbae5840b3b-goog
>
--
Dmitry
Powered by blists - more mailing lists