| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CABqG17j2kMEK98T90eudb_ZWftaV2L4_MdA8ML+v_cm3MHFs1w@mail.gmail.com>
Date: Thu, 2 May 2024 22:55:17 +0530
From: Naresh Solanki <naresh.solanki@...ements.com>
To: Guenter Roeck <linux@...ck-us.net>
Cc: Jean Delvare <jdelvare@...e.com>, linux-hwmon@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2] hwmon (max6639): Use regmap
Hi Guenter,
On Wed, 1 May 2024 at 19:27, Guenter Roeck <linux@...ck-us.net> wrote:
>
> On Wed, May 01, 2024 at 02:35:38AM +0530, Naresh Solanki wrote:
> > Add regmap support & remove local caching.
> >
> > Signed-off-by: Naresh Solanki <naresh.solanki@...ements.com>
> > ---
> > drivers/hwmon/Kconfig | 1 +
> > drivers/hwmon/max6639.c | 310 ++++++++++++++++++++--------------------
> > 2 files changed, 154 insertions(+), 157 deletions(-)
> >
> >
> > base-commit: 8b3aa2c488653fa1e127cf6e11499a8cbbaccad0
> >
> > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> > index bafc0058c728..e14ae18a973b 100644
> > --- a/drivers/hwmon/Kconfig
> > +++ b/drivers/hwmon/Kconfig
> > @@ -1233,6 +1233,7 @@ config SENSORS_MAX6621
> > config SENSORS_MAX6639
> > tristate "Maxim MAX6639 sensor chip"
> > depends on I2C
> > + select REGMAP_I2C
> > help
> > If you say yes here you get support for the MAX6639
> > sensor chips.
> > diff --git a/drivers/hwmon/max6639.c b/drivers/hwmon/max6639.c
> > index 5dd0349e8bd0..b12d2098e259 100644
> > --- a/drivers/hwmon/max6639.c
> > +++ b/drivers/hwmon/max6639.c
> > @@ -20,6 +20,7 @@
> > #include <linux/err.h>
> > #include <linux/mutex.h>
> > #include <linux/platform_data/max6639.h>
> > +#include <linux/regmap.h>
> >
> > /* Addresses to scan */
> > static const unsigned short normal_i2c[] = { 0x2c, 0x2e, 0x2f, I2C_CLIENT_END };
> > @@ -57,6 +58,8 @@ static const unsigned short normal_i2c[] = { 0x2c, 0x2e, 0x2f, I2C_CLIENT_END };
> >
> > #define MAX6639_FAN_CONFIG3_THERM_FULL_SPEED 0x40
> >
> > +#define MAX6639_NDEV 2
> > +
> > static const int rpm_ranges[] = { 2000, 4000, 8000, 16000 };
> >
> > #define FAN_FROM_REG(val, rpm_range) ((val) == 0 || (val) == 255 ? \
> > @@ -67,22 +70,11 @@ static const int rpm_ranges[] = { 2000, 4000, 8000, 16000 };
> > * Client data (each client gets its own)
> > */
> > struct max6639_data {
> > - struct i2c_client *client;
> > + struct regmap *regmap;
> > struct mutex update_lock;
>
> I think that lock can be dropped entirely.
Sure.
>
> > - bool valid; /* true if following fields are valid */
> > - unsigned long last_updated; /* In jiffies */
> > -
> > - /* Register values sampled regularly */
> > - u16 temp[2]; /* Temperature, in 1/8 C, 0..255 C */
> > - bool temp_fault[2]; /* Detected temperature diode failure */
> > - u8 fan[2]; /* Register value: TACH count for fans >=30 */
> > - u8 status; /* Detected channel alarms and fan failures */
> >
> > /* Register values only written to */
> > - u8 pwm[2]; /* Register value: Duty cycle 0..120 */
> > - u8 temp_therm[2]; /* THERM Temperature, 0..255 C (->_max) */
> > - u8 temp_alert[2]; /* ALERT Temperature, 0..255 C (->_crit) */
> > - u8 temp_ot[2]; /* OT Temperature, 0..255 C (->_emergency) */
> > + u8 pwm[MAX6639_NDEV]; /* Register value: Duty cycle 0..120 */
>
> pwm caching needs to be dropped as well. It is no longer initialized in
> max6639_init_client(), but updated and later used in pwm_store() and
> pwm_show(). Looking at the datasheet, the pwm registers are volatile
> and should not be cached in the first place.
Yes. I did that but found that the register is write only. i.e.,
>
>
> >
> > /* Register values initialized only once */
> > u8 ppr; /* Pulses per rotation 0..3 for 1..4 ppr */
> > @@ -92,90 +84,58 @@ struct max6639_data {
> > struct regulator *reg;
> > };
> >
> > -static struct max6639_data *max6639_update_device(struct device *dev)
> > -{
> > - struct max6639_data *data = dev_get_drvdata(dev);
> > - struct i2c_client *client = data->client;
> > - struct max6639_data *ret = data;
> > - int i;
> > - int status_reg;
> > -
> > - mutex_lock(&data->update_lock);
> > -
> > - if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
> > - int res;
> > -
> > - dev_dbg(&client->dev, "Starting max6639 update\n");
> > -
> > - status_reg = i2c_smbus_read_byte_data(client,
> > - MAX6639_REG_STATUS);
> > - if (status_reg < 0) {
> > - ret = ERR_PTR(status_reg);
> > - goto abort;
> > - }
> > -
> > - data->status = status_reg;
> > -
> > - for (i = 0; i < 2; i++) {
> > - res = i2c_smbus_read_byte_data(client,
> > - MAX6639_REG_FAN_CNT(i));
> > - if (res < 0) {
> > - ret = ERR_PTR(res);
> > - goto abort;
> > - }
> > - data->fan[i] = res;
> > -
> > - res = i2c_smbus_read_byte_data(client,
> > - MAX6639_REG_TEMP_EXT(i));
> > - if (res < 0) {
> > - ret = ERR_PTR(res);
> > - goto abort;
> > - }
> > - data->temp[i] = res >> 5;
> > - data->temp_fault[i] = res & 0x01;
> > -
> > - res = i2c_smbus_read_byte_data(client,
> > - MAX6639_REG_TEMP(i));
> > - if (res < 0) {
> > - ret = ERR_PTR(res);
> > - goto abort;
> > - }
> > - data->temp[i] |= res << 3;
> > - }
> > -
> > - data->last_updated = jiffies;
> > - data->valid = true;
> > - }
> > -abort:
> > - mutex_unlock(&data->update_lock);
> > -
> > - return ret;
> > -}
> > -
> > static ssize_t temp_input_show(struct device *dev,
> > struct device_attribute *dev_attr, char *buf)
> > {
> > long temp;
> > - struct max6639_data *data = max6639_update_device(dev);
> > + struct max6639_data *data = dev_get_drvdata(dev);
> > struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
> > + unsigned int val;
> > + int res;
> >
> > if (IS_ERR(data))
> > return PTR_ERR(data);
>
> Drop
Sure
>
> >
> > - temp = data->temp[attr->index] * 125;
> > + mutex_lock(&data->update_lock);
> > + res = regmap_read(data->regmap, MAX6639_REG_TEMP_EXT(attr->index), &val);
> > + if (res < 0)
> > + goto exit;
> > +
> > + temp = val >> 5;
> > + res = regmap_read(data->regmap, MAX6639_REG_TEMP(attr->index), &val);
> > + if (res < 0)
> > + goto exit;
> > +
> > + temp |= val << 3;
> > + temp *= 125;
> > +
> > +exit:
> > + mutex_unlock(&data->update_lock);
Sure
>
> Given that updates to MAX6639_REG_TEMP are blocked for up to 250ms
> after reading MAX6639_REG_TEMP_EXT, I think this lock is unnecessary.
>
> > + if (res < 0)
> > + return res;
> > +
> > return sprintf(buf, "%ld\n", temp);
> > }
> >
> > static ssize_t temp_fault_show(struct device *dev,
> > struct device_attribute *dev_attr, char *buf)
> > {
> > - struct max6639_data *data = max6639_update_device(dev);
> > + struct max6639_data *data = dev_get_drvdata(dev);
> > struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
> > + unsigned int val;
> > + int res;
> >
> > if (IS_ERR(data))
> > return PTR_ERR(data);
>
> Drop
Ack
>
> >
> > - return sprintf(buf, "%d\n", data->temp_fault[attr->index]);
> > + mutex_lock(&data->update_lock);
> > + res = regmap_read(data->regmap, MAX6639_REG_TEMP_EXT(attr->index), &val);
> > + mutex_unlock(&data->update_lock);
>
> Updates are blocked for 250ms after the extended temperature is read.
> I don't think there is a good reason to hold the lock while reading
> the register; worst case the value will be read here and by another thread
> from temp_input_show() at the same time, but that should not make a
> practical difference.
Ack
>
> > +
> > + if (res < 0)
> > + return res;
> > +
> > + return sprintf(buf, "%d\n", val & 1);
> > }
> >
> > static ssize_t temp_max_show(struct device *dev,
> > @@ -183,8 +143,17 @@ static ssize_t temp_max_show(struct device *dev,
> > {
> > struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
> > struct max6639_data *data = dev_get_drvdata(dev);
> > + unsigned int val;
> > + int res;
> >
> > - return sprintf(buf, "%d\n", (data->temp_therm[attr->index] * 1000));
> > + mutex_lock(&data->update_lock);
> > + res = regmap_read(data->regmap, MAX6639_REG_THERM_LIMIT(attr->index), &val);
> > + mutex_unlock(&data->update_lock);
>
> Unnecessary lock. In general there is really hardly ever a good reason
> to hold a local lock during single register regmap accesses. Regmap
> serializes those accesses internally anyway.
Ack
>
> > +
> > + if (res < 0)
> > + return res;
> > +
> > + return sprintf(buf, "%d\n", (val * 1000));
> > }
> >
> > static ssize_t temp_max_store(struct device *dev,
> > @@ -193,7 +162,6 @@ static ssize_t temp_max_store(struct device *dev,
> > {
> > struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
> > struct max6639_data *data = dev_get_drvdata(dev);
> > - struct i2c_client *client = data->client;
> > unsigned long val;
> > int res;
> >
> > @@ -202,10 +170,8 @@ static ssize_t temp_max_store(struct device *dev,
> > return res;
> >
> > mutex_lock(&data->update_lock);
> > - data->temp_therm[attr->index] = TEMP_LIMIT_TO_REG(val);
> > - i2c_smbus_write_byte_data(client,
> > - MAX6639_REG_THERM_LIMIT(attr->index),
> > - data->temp_therm[attr->index]);
> > + regmap_write(data->regmap, MAX6639_REG_THERM_LIMIT(attr->index),
> > + TEMP_LIMIT_TO_REG(val));
> > mutex_unlock(&data->update_lock);
>
> Now unnecessary lock (it was necessary previously to ensure that
> data->temp_therm[] and the register value are in sync).
Ack
>
> > return count;
> > }
> > @@ -215,8 +181,17 @@ static ssize_t temp_crit_show(struct device *dev,
> > {
> > struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
> > struct max6639_data *data = dev_get_drvdata(dev);
> > + unsigned int val;
> > + int res;
> > +
> > + mutex_lock(&data->update_lock);
> > + res = regmap_read(data->regmap, MAX6639_REG_ALERT_LIMIT(attr->index), &val);
> > + mutex_unlock(&data->update_lock);
>
> Unnecessary lock
Ack
>
> >
> > - return sprintf(buf, "%d\n", (data->temp_alert[attr->index] * 1000));
> > + if (res < 0)
> > + return res;
> > +
> > + return sprintf(buf, "%d\n", (val * 1000));
> > }
> >
> > static ssize_t temp_crit_store(struct device *dev,
> > @@ -225,7 +200,6 @@ static ssize_t temp_crit_store(struct device *dev,
> > {
> > struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
> > struct max6639_data *data = dev_get_drvdata(dev);
> > - struct i2c_client *client = data->client;
> > unsigned long val;
> > int res;
> >
> > @@ -234,10 +208,8 @@ static ssize_t temp_crit_store(struct device *dev,
> > return res;
> >
> > mutex_lock(&data->update_lock);
> > - data->temp_alert[attr->index] = TEMP_LIMIT_TO_REG(val);
> > - i2c_smbus_write_byte_data(client,
> > - MAX6639_REG_ALERT_LIMIT(attr->index),
> > - data->temp_alert[attr->index]);
> > + regmap_write(data->regmap, MAX6639_REG_ALERT_LIMIT(attr->index),
> > + TEMP_LIMIT_TO_REG(val));
>
> Now unnecessary lock
Ack
>
> > mutex_unlock(&data->update_lock);
> > return count;
> > }
> > @@ -248,8 +220,17 @@ static ssize_t temp_emergency_show(struct device *dev,
> > {
> > struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
> > struct max6639_data *data = dev_get_drvdata(dev);
> > + unsigned int val;
> > + int res;
> >
> > - return sprintf(buf, "%d\n", (data->temp_ot[attr->index] * 1000));
> > + mutex_lock(&data->update_lock);
> > + res = regmap_read(data->regmap, MAX6639_REG_OT_LIMIT(attr->index), &val);
> > + mutex_unlock(&data->update_lock);
>
> Unnecessary lock
Ack
>
> > +
> > + if (res < 0)
> > + return res;
> > +
> > + return sprintf(buf, "%d\n", (val * 1000));
> > }
> >
> > static ssize_t temp_emergency_store(struct device *dev,
> > @@ -258,7 +239,6 @@ static ssize_t temp_emergency_store(struct device *dev,
> > {
> > struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
> > struct max6639_data *data = dev_get_drvdata(dev);
> > - struct i2c_client *client = data->client;
> > unsigned long val;
> > int res;
> >
> > @@ -267,10 +247,7 @@ static ssize_t temp_emergency_store(struct device *dev,
> > return res;
> >
> > mutex_lock(&data->update_lock);
> > - data->temp_ot[attr->index] = TEMP_LIMIT_TO_REG(val);
> > - i2c_smbus_write_byte_data(client,
> > - MAX6639_REG_OT_LIMIT(attr->index),
> > - data->temp_ot[attr->index]);
> > + regmap_write(data->regmap, MAX6639_REG_OT_LIMIT(attr->index), TEMP_LIMIT_TO_REG(val));
>
> Unnecessary lock
Ack
>
> > mutex_unlock(&data->update_lock);
> > return count;
> > }
> > @@ -290,7 +267,6 @@ static ssize_t pwm_store(struct device *dev,
> > {
> > struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
> > struct max6639_data *data = dev_get_drvdata(dev);
> > - struct i2c_client *client = data->client;
> > unsigned long val;
> > int res;
> >
> > @@ -299,12 +275,9 @@ static ssize_t pwm_store(struct device *dev,
> > return res;
> >
> > val = clamp_val(val, 0, 255);
> > -
> > - mutex_lock(&data->update_lock);
> > data->pwm[attr->index] = (u8)(val * 120 / 255);
> > - i2c_smbus_write_byte_data(client,
> > - MAX6639_REG_TARGTDUTY(attr->index),
> > - data->pwm[attr->index]);
> > + mutex_lock(&data->update_lock);
> > + regmap_write(data->regmap, MAX6639_REG_TARGTDUTY(attr->index), data->pwm[attr->index]);
> > mutex_unlock(&data->update_lock);
>
> Now unnecessary lock (after data->pwm is removed)
Ack
>
> > return count;
> > }
> > @@ -312,26 +285,35 @@ static ssize_t pwm_store(struct device *dev,
> > static ssize_t fan_input_show(struct device *dev,
> > struct device_attribute *dev_attr, char *buf)
> > {
> > - struct max6639_data *data = max6639_update_device(dev);
> > + struct max6639_data *data = dev_get_drvdata(dev);
> > struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
> > + unsigned int val;
> > + int res;
> >
> > if (IS_ERR(data))
> > return PTR_ERR(data);
> >
> > - return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[attr->index],
> > - data->rpm_range));
> > + res = regmap_read(data->regmap, MAX6639_REG_FAN_CNT(attr->index), &val);
> > + if (res < 0)
> > + return res;
> > +
> > + return sprintf(buf, "%d\n", FAN_FROM_REG(val, data->rpm_range));
> > }
> >
> > static ssize_t alarm_show(struct device *dev,
> > struct device_attribute *dev_attr, char *buf)
> > {
> > - struct max6639_data *data = max6639_update_device(dev);
> > + struct max6639_data *data = dev_get_drvdata(dev);
> > struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
> > + unsigned int val;
> > + int res;
> >
> > if (IS_ERR(data))
> > return PTR_ERR(data);
> >
> > - return sprintf(buf, "%d\n", !!(data->status & (1 << attr->index)));
> > + res = regmap_read(data->regmap, MAX6639_REG_STATUS, &val);
> > +
> > + return sprintf(buf, "%d\n", !!(val & (1 << attr->index)));
> > }
> >
> > static SENSOR_DEVICE_ATTR_RO(temp1_input, temp_input, 0);
> > @@ -401,6 +383,11 @@ static int rpm_range_to_reg(int range)
> > return 1; /* default: 4000 RPM */
> > }
> >
> > +static int max6639_set_ppr(struct max6639_data *data, u8 channel, u8 ppr)
> > +{
> > + return regmap_write(data->regmap, MAX6639_REG_FAN_PPR(channel), ppr << 6);
> > +}
> > +
> > static int max6639_init_client(struct i2c_client *client,
> > struct max6639_data *data)
> > {
> > @@ -408,49 +395,43 @@ static int max6639_init_client(struct i2c_client *client,
> > dev_get_platdata(&client->dev);
> > int i;
> > int rpm_range = 1; /* default: 4000 RPM */
> > - int err;
> > + int err, ppr;
> >
> > /* Reset chip to default values, see below for GCONFIG setup */
> > - err = i2c_smbus_write_byte_data(client, MAX6639_REG_GCONFIG,
> > - MAX6639_GCONFIG_POR);
> > + err = regmap_write(data->regmap, MAX6639_REG_GCONFIG, MAX6639_GCONFIG_POR);
> > if (err)
> > goto exit;
> >
> > /* Fans pulse per revolution is 2 by default */
> > if (max6639_info && max6639_info->ppr > 0 &&
> > max6639_info->ppr < 5)
> > - data->ppr = max6639_info->ppr;
> > + ppr = max6639_info->ppr;
> > else
> > - data->ppr = 2;
> > - data->ppr -= 1;
> > + ppr = 2;
> > + ppr -= 1;
> >
> > if (max6639_info)
> > rpm_range = rpm_range_to_reg(max6639_info->rpm_range);
> > data->rpm_range = rpm_range;
> >
> > - for (i = 0; i < 2; i++) {
> > + for (i = 0; i < MAX6639_NDEV; i++) {
> >
> > /* Set Fan pulse per revolution */
> > - err = i2c_smbus_write_byte_data(client,
> > - MAX6639_REG_FAN_PPR(i),
> > - data->ppr << 6);
> > + err = max6639_set_ppr(data, i, ppr);
> > if (err)
> > goto exit;
> >
> > /* Fans config PWM, RPM */
> > - err = i2c_smbus_write_byte_data(client,
> > - MAX6639_REG_FAN_CONFIG1(i),
> > - MAX6639_FAN_CONFIG1_PWM | rpm_range);
> > + err = regmap_write(data->regmap, MAX6639_REG_FAN_CONFIG1(i),
> > + MAX6639_FAN_CONFIG1_PWM | rpm_range);
> > if (err)
> > goto exit;
> >
> > /* Fans PWM polarity high by default */
> > if (max6639_info && max6639_info->pwm_polarity == 0)
> > - err = i2c_smbus_write_byte_data(client,
> > - MAX6639_REG_FAN_CONFIG2a(i), 0x00);
> > + err = regmap_write(data->regmap, MAX6639_REG_FAN_CONFIG2a(i), 0x00);
> > else
> > - err = i2c_smbus_write_byte_data(client,
> > - MAX6639_REG_FAN_CONFIG2a(i), 0x02);
> > + err = regmap_write(data->regmap, MAX6639_REG_FAN_CONFIG2a(i), 0x02);
> > if (err)
> > goto exit;
> >
> > @@ -458,42 +439,31 @@ static int max6639_init_client(struct i2c_client *client,
> > * /THERM full speed enable,
> > * PWM frequency 25kHz, see also GCONFIG below
> > */
> > - err = i2c_smbus_write_byte_data(client,
> > - MAX6639_REG_FAN_CONFIG3(i),
> > - MAX6639_FAN_CONFIG3_THERM_FULL_SPEED | 0x03);
> > + err = regmap_write(data->regmap, MAX6639_REG_FAN_CONFIG3(i),
> > + MAX6639_FAN_CONFIG3_THERM_FULL_SPEED | 0x03);
> > if (err)
> > goto exit;
> >
> > /* Max. temp. 80C/90C/100C */
> > - data->temp_therm[i] = 80;
> > - data->temp_alert[i] = 90;
> > - data->temp_ot[i] = 100;
> > - err = i2c_smbus_write_byte_data(client,
> > - MAX6639_REG_THERM_LIMIT(i),
> > - data->temp_therm[i]);
> > + err = regmap_write(data->regmap, MAX6639_REG_THERM_LIMIT(i), 80);
> > if (err)
> > goto exit;
> > - err = i2c_smbus_write_byte_data(client,
> > - MAX6639_REG_ALERT_LIMIT(i),
> > - data->temp_alert[i]);
> > + err = regmap_write(data->regmap, MAX6639_REG_ALERT_LIMIT(i), 90);
> > if (err)
> > goto exit;
> > - err = i2c_smbus_write_byte_data(client,
> > - MAX6639_REG_OT_LIMIT(i), data->temp_ot[i]);
> > + err = regmap_write(data->regmap, MAX6639_REG_OT_LIMIT(i), 100);
> > if (err)
> > goto exit;
> >
> > /* PWM 120/120 (i.e. 100%) */
> > - data->pwm[i] = 120;
> > - err = i2c_smbus_write_byte_data(client,
> > - MAX6639_REG_TARGTDUTY(i), data->pwm[i]);
> > + err = regmap_write(data->regmap, MAX6639_REG_TARGTDUTY(i), 120);
> > if (err)
> > goto exit;
> > }
> > /* Start monitoring */
> > - err = i2c_smbus_write_byte_data(client, MAX6639_REG_GCONFIG,
> > - MAX6639_GCONFIG_DISABLE_TIMEOUT | MAX6639_GCONFIG_CH2_LOCAL |
> > - MAX6639_GCONFIG_PWM_FREQ_HI);
> > + err = regmap_write(data->regmap, MAX6639_REG_GCONFIG,
> > + MAX6639_GCONFIG_DISABLE_TIMEOUT | MAX6639_GCONFIG_CH2_LOCAL |
> > + MAX6639_GCONFIG_PWM_FREQ_HI);
> > exit:
> > return err;
> > }
> > @@ -524,6 +494,30 @@ static void max6639_regulator_disable(void *data)
> > regulator_disable(data);
> > }
> >
> > +static bool max6639_regmap_is_volatile(struct device *dev, unsigned int reg)
> > +{
> > + switch (reg) {
> > + case MAX6639_REG_TEMP(0):
> > + case MAX6639_REG_TEMP_EXT(0):
> > + case MAX6639_REG_TEMP(1):
> > + case MAX6639_REG_TEMP_EXT(1):
> > + case MAX6639_REG_STATUS:
> > + case MAX6639_REG_FAN_CNT(0):
> > + case MAX6639_REG_FAN_CNT(1):
>
> pwm registers are also volatile.
>
> > + return true;
> > + default:
> > + return false;
> > + }
> > +}
> > +
> > +static const struct regmap_config max6639_regmap_config = {
> > + .reg_bits = 8,
> > + .val_bits = 8,
> > + .max_register = MAX6639_REG_DEVREV,
> > + .cache_type = REGCACHE_MAPLE,
> > + .volatile_reg = max6639_regmap_is_volatile,
> > +};
> > +
> > static int max6639_probe(struct i2c_client *client)
> > {
> > struct device *dev = &client->dev;
> > @@ -535,7 +529,11 @@ static int max6639_probe(struct i2c_client *client)
> > if (!data)
> > return -ENOMEM;
> >
> > - data->client = client;
> > + data->regmap = devm_regmap_init_i2c(client, &max6639_regmap_config);
> > + if (IS_ERR(data->regmap))
> > + return dev_err_probe(dev,
> > + PTR_ERR(data->regmap),
> > + "regmap initialization failed\n");
> >
> > data->reg = devm_regulator_get_optional(dev, "fan");
> > if (IS_ERR(data->reg)) {
> > @@ -573,25 +571,24 @@ static int max6639_probe(struct i2c_client *client)
> >
> > static int max6639_suspend(struct device *dev)
> > {
> > - struct i2c_client *client = to_i2c_client(dev);
> > struct max6639_data *data = dev_get_drvdata(dev);
> > - int ret = i2c_smbus_read_byte_data(client, MAX6639_REG_GCONFIG);
> > + int ret, err;
> >
> > - if (ret < 0)
> > - return ret;
> > + err = regmap_read(data->regmap, MAX6639_REG_GCONFIG, &ret);
> > +
>
> Unnecessary empty line.
Ack
>
> > + if (err < 0)
> > + return err;
> >
> > if (data->reg)
> > regulator_disable(data->reg);
> >
> > - return i2c_smbus_write_byte_data(client,
> > - MAX6639_REG_GCONFIG, ret | MAX6639_GCONFIG_STANDBY);
> > + return regmap_write(data->regmap, MAX6639_REG_GCONFIG, ret | MAX6639_GCONFIG_STANDBY);
> > }
> >
> > static int max6639_resume(struct device *dev)
> > {
> > - struct i2c_client *client = to_i2c_client(dev);
> > struct max6639_data *data = dev_get_drvdata(dev);
> > - int ret;
> > + int ret, err;
> >
> > if (data->reg) {
> > ret = regulator_enable(data->reg);
> > @@ -601,12 +598,11 @@ static int max6639_resume(struct device *dev)
> > }
> > }
> >
> > - ret = i2c_smbus_read_byte_data(client, MAX6639_REG_GCONFIG);
> > - if (ret < 0)
> > - return ret;
> > + err = regmap_read(data->regmap, MAX6639_REG_GCONFIG, &ret);
> > + if (err < 0)
> > + return err;
> >
> > - return i2c_smbus_write_byte_data(client,
> > - MAX6639_REG_GCONFIG, ret & ~MAX6639_GCONFIG_STANDBY);
> > + return regmap_write(data->regmap, MAX6639_REG_GCONFIG, ret & ~MAX6639_GCONFIG_STANDBY);
> > }
> >
> > static const struct i2c_device_id max6639_id[] = {
Regards,
Naresh
Powered by blists - more mailing lists