[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240503145633.1ad55378@SWDEV2.connecttech.local>
Date: Fri, 3 May 2024 14:56:33 -0400
From: Parker Newman <parker@...est.io>
To: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>, Parker
Newman <pnewman@...necttech.com>, LKML <linux-kernel@...r.kernel.org>,
linux-serial <linux-serial@...r.kernel.org>, Greg Kroah-Hartman
<gregkh@...uxfoundation.org>, Jiri Slaby <jirislaby@...nel.org>
Subject: Re: [PATCH v1 11/13] serial: 8250_exar: Use BIT() in exar_ee_read()
On Fri, 3 May 2024 18:35:45 +0300
Andy Shevchenko <andriy.shevchenko@...ux.intel.com> wrote:
> On Fri, May 03, 2024 at 10:26:32AM -0400, Parker Newman wrote:
> > On Thu, 2 May 2024 20:20:01 +0300
> > Andy Shevchenko <andriy.shevchenko@...ux.intel.com> wrote:
> > > On Thu, May 02, 2024 at 07:08:21PM +0300, Ilpo Järvinen wrote:
> > > > On Thu, 2 May 2024, Andy Shevchenko wrote:
>
> ...
>
> > > > > // Send address to read from
> > > > > - for (i = 1 << (UART_EXAR_REGB_EE_ADDR_SIZE - 1); i; i >>= 1)
> > > > > - exar_ee_write_bit(priv, (ee_addr & i));
> > > > > + for (i = UART_EXAR_REGB_EE_ADDR_SIZE - 1; i >= 0; i--)
> > > > > + exar_ee_write_bit(priv, ee_addr & BIT(i));
> > > > >
> > > > > // Read data 1 bit at a time
> > > > > for (i = 0; i <= UART_EXAR_REGB_EE_DATA_SIZE; i++) {
> > > > > - data <<= 1;
> > > > > - data |= exar_ee_read_bit(priv);
> > > > > + if (exar_ee_read_bit(priv))
> > > > > + data |= BIT(i);
> > > >
> > > > Does this end up reversing the order of bits? In the original, data was left
> > > > shifted which moved the existing bits and added the lsb but the replacement
> > > > adds highest bit on each iteration?
> > >
> > > Oh, seems a good catch!
> > >
> > > I was also wondering, but missed this somehow. Seems the EEPROM is in BE mode,
> > > so two loops has to be aligned.
> > >
> >
> > I just tested this and Ilpo is correct, the read loop portion is backwards as
> > expected. This is the corrected loop:
> >
> > // Read data 1 bit at a time
> > for (i = UART_EXAR_REGB_EE_DATA_SIZE; i >= 0; i--) {
> > if (exar_ee_read_bit(priv))
> > data |= BIT(i);
> > }
> >
> > I know this looks wrong because its looping from 16->0 rather than the
> > more intuitive 15->0 for a 16bit value. This is actually correct however
> > because according to the AT93C46D datasheet there is always dummy 0 bit
> > before the actual 16 bits of data.
> >
> > I hope that helps,
>
> Yes, it helps and means that we need that comment to be added to the code Is
> it the same applicable to the write part above (for address)? Because AFAIU
> mine is one bit longer than yours. Maybe in the original code is a bug? Have
> you tried to read high addresses?
The address portion is 6 bits, nothing extra, so what you have is correct.
The original code was legacy, I cleaned it up but didn't change those loops
Your method works out the the same number of bits as the legacy method
which sets bit 5 and has to shift right 6 times to get i = 0 which ends the loop.
Parker
Powered by blists - more mailing lists