lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Fri, 3 May 2024 21:33:35 +0200
From: Christian Marangi <ansuelsmth@...il.com>
To: Conor Dooley <conor@...nel.org>
Cc: Hauke Mehrtens <hauke@...ke-m.de>,
	Rafał Miłecki <zajec5@...il.com>,
	Thomas Bogendoerfer <tsbogend@...ha.franken.de>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Florian Fainelli <florian.fainelli@...adcom.com>,
	Broadcom internal kernel review list <bcm-kernel-feedback-list@...adcom.com>,
	Álvaro Fernández Rojas <noltari@...il.com>,
	linux-mips@...r.kernel.org, devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	Daniel González Cabanelas <dgcbueu@...il.com>
Subject: Re: [PATCH 3/6] dt-bindings: mips: brcm: Document mips-cbr-reg
 property

On Fri, May 03, 2024 at 05:21:41PM +0100, Conor Dooley wrote:
> On Fri, May 03, 2024 at 03:54:03PM +0200, Christian Marangi wrote:
> > Document mips-cbr-reg and mips-broken-cbr-reg property.
> > 
> > Some SoC suffer from a BUG where read_c0_brcm_cbr() might return 0
> > if called from TP1. The CBR address is always the same on the SoC
> > hence it can be provided in DT to handle broken case where bootloader
> > doesn't init it or SMP where read_c0_brcm_cbr() returns 0 from TP1.
> > 
> > Usage of this property is to give an address also in these broken
> > configuration/bootloader.
> > 
> > If the SoC/Bootloader ALWAYS provide a broken CBR address the property
> > "mips-broken-cbr-reg" can be used to ignore any value already set in the
> > registers for CBR address.
> > 
> > Signed-off-by: Christian Marangi <ansuelsmth@...il.com>
> > ---
> >  .../devicetree/bindings/mips/brcm/soc.yaml    | 32 +++++++++++++++++++
> >  1 file changed, 32 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/mips/brcm/soc.yaml b/Documentation/devicetree/bindings/mips/brcm/soc.yaml
> > index 975945ca2888..12d394b7e011 100644
> > --- a/Documentation/devicetree/bindings/mips/brcm/soc.yaml
> > +++ b/Documentation/devicetree/bindings/mips/brcm/soc.yaml
> > @@ -55,6 +55,21 @@ properties:
> >           under the "cpus" node.
> >          $ref: /schemas/types.yaml#/definitions/uint32
> >  
> > +      mips-broken-cbr-reg:
> > +        description: Declare that the Bootloader init a broken
> > +          CBR address in the registers and the one provided from
> > +          DT should always be used.
> 
> Why is this property even needed, is it not sufficient to just add the
> mips-cbr-reg property to the DT for SoCs that need it and use the
> property when present?
>

I described this in the cover letter. CBR might be set by the Bootloader
and might be not 0. In that case the value is ignored as an extra
precaution and the broken propetry is needed.

> > +        type: boolean
> > +
> > +      mips-cbr-reg:
> 
> Missing a vendor prefix.
> 

I will change this to bmips,cbr-reg hope it's O.K.

> > +        description: Reference address of the CBR.
> > +          Some SoC suffer from a BUG where read_c0_brcm_cbr() might
> > +          return 0 if called from TP1. The CBR address is always the
> > +          same on the SoC hence it can be provided in DT to handle
> > +          broken case where bootloader doesn't init it or SMP where
> 
> s/init/initialise/ please :)
> 

Sure!

> Thanks,
> Conor.
> 
> > +          read_c0_brcm_cbr() returns 0 from TP1.
> > +        $ref: /schemas/types.yaml#/definitions/uint32
> > +
> >      patternProperties:
> >        "^cpu@[0-9]$":
> >          type: object
> > @@ -64,6 +79,23 @@ properties:
> >      required:
> >        - mips-hpt-frequency
> >  
> > +dependencies:
> > +  mips-broken-cbr-reg: [ mips-cbr-reg ]
> > +
> > +if:
> > +  properties:
> > +    compatible:
> > +      contains:
> > +        anyOf:
> > +          - const: brcm,bcm6358
> > +          - const: brcm,bcm6368
> > +
> > +then:
> > +  properties:
> > +    cpus:
> > +      required:
> > +        - mips-cbr-reg
> > +
> >  additionalProperties: true
> >  
> >  examples:
> > -- 
> > 2.43.0
> > 



-- 
	Ansuel

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ