linux-kernel - Re: [PATCH 2/2] arm64: dts: ti: k3-j784s4-evm: Enable USB3 support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <d67a0ed2-d0a2-7c10-d247-74953590af5c@ti.com>
Date: Fri, 3 May 2024 13:06:07 +0530
From: Ravi Gunasekaran <r-gunasekaran@...com>
To: Roger Quadros <rogerq@...nel.org>, <nm@...com>, <vigneshr@...com>
CC: <kristo@...nel.org>, <robh@...nel.org>, <krzk+dt@...nel.org>,
        <conor+dt@...nel.org>, <srk@...com>,
        <linux-arm-kernel@...ts.infradead.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>,
        Ravi
 Gunasekaran <r-gunasekaran@...com>
Subject: Re: [PATCH 2/2] arm64: dts: ti: k3-j784s4-evm: Enable USB3 support

Roger, Rob

On 5/3/24 12:18 PM, Roger Quadros wrote:
> 
> 
> On 02/05/2024 08:36, Ravi Gunasekaran wrote:
>> From: Matt Ranostay <mranostay@...com>
>>
>> The board uses SERDES0 Lane 3 for USB3 IP. So update the
>> SerDes lane info for USB. Add the pin mux data and
>> enable USB3 support.
>>
>> Signed-off-by: Matt Ranostay <mranostay@...com>
>> Signed-off-by: Ravi Gunasekaran <r-gunasekaran@...com>
>> ---
>>  arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 41 ++++++++++++++++++++++++
>>  1 file changed, 41 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
>> index d511b25d62e3..bee73dab803d 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
>> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
>> @@ -336,6 +336,13 @@
>>  			J784S4_IOPAD(0x010, PIN_INPUT_PULLUP, 8) /* (AH33) MCAN13_RX.I2C4_SDA */
>>  		>;
>>  	};
>> +
>> +	main_usbss0_pins_default: main-usbss0-pins-default {
> 
> Should be main-usbss0-default-pins
> 
> This should fix the checkpatch warning.
> 

I will fix and send a v2

[...]

-- 
Regards,
Ravi