| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240503081125.67990-13-arnd@kernel.org>
Date: Fri, 3 May 2024 10:11:23 +0200
From: Arnd Bergmann <arnd@...nel.org>
To: linux-alpha@...r.kernel.org
Cc: Arnd Bergmann <arnd@...db.de>,
Richard Henderson <richard.henderson@...aro.org>,
Ivan Kokshaysky <ink@...assic.park.msu.ru>,
Matt Turner <mattst88@...il.com>,
Alexander Viro <viro@...iv.linux.org.uk>,
Marc Zyngier <maz@...nel.org>,
Linus Torvalds <torvalds@...ux-foundation.org>,
"Paul E. McKenney" <paulmck@...nel.org>,
linux-kernel@...r.kernel.org
Subject: [PATCH 12/14] alpha: remove LCA and APECS based machines
From: Arnd Bergmann <arnd@...db.de>
APECS is the DECchip 21071x chipset for the EV4 and EV45 generation, while
LCA is the integrated I/O support on the corresponding low-cost alpha
machines of that generation.
All of these CPUs lack the BWX extension for byte and word access, so
drop the chipset support and all associated machines.
Signed-off-by: Arnd Bergmann <arnd@...db.de>
---
arch/alpha/Kconfig | 114 +-----
arch/alpha/include/asm/core_apecs.h | 534 ----------------------------
arch/alpha/include/asm/core_lca.h | 378 --------------------
arch/alpha/include/asm/dma.h | 9 +-
arch/alpha/include/asm/io.h | 6 +-
arch/alpha/include/asm/irq.h | 8 +-
arch/alpha/kernel/Makefile | 19 +-
arch/alpha/kernel/core_apecs.c | 420 ----------------------
arch/alpha/kernel/core_lca.c | 473 ------------------------
arch/alpha/kernel/irq_i8259.c | 4 -
arch/alpha/kernel/pci_impl.h | 4 +-
arch/alpha/kernel/proto.h | 13 -
arch/alpha/kernel/setup.c | 79 +---
arch/alpha/kernel/sys_cabriolet.c | 59 ---
arch/alpha/kernel/sys_eb64p.c | 238 -------------
arch/alpha/kernel/sys_mikasa.c | 57 ---
arch/alpha/kernel/sys_noritake.c | 60 ----
arch/alpha/kernel/sys_sio.c | 486 -------------------------
18 files changed, 21 insertions(+), 2940 deletions(-)
delete mode 100644 arch/alpha/include/asm/core_apecs.h
delete mode 100644 arch/alpha/include/asm/core_lca.h
delete mode 100644 arch/alpha/kernel/core_apecs.c
delete mode 100644 arch/alpha/kernel/core_lca.c
delete mode 100644 arch/alpha/kernel/sys_eb64p.c
delete mode 100644 arch/alpha/kernel/sys_sio.c
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 951a9c712361..ee209e895505 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -90,20 +90,12 @@ choice
<http://www.alphalinux.org/>. In summary:
Alcor/Alpha-XLT AS 600, AS 500, XL-300, XL-366
- Alpha-XL XL-233, XL-266
- AlphaBook1 Alpha laptop
- Avanti AS 200, AS 205, AS 250, AS 255, AS 300, AS 400
- Cabriolet AlphaPC64, AlphaPCI64
DP264 DP264 / DS20 / ES40 / DS10 / DS10L
EB164 EB164 21164 evaluation board
- EB64+ EB64+ 21064 evaluation board
- EB66 EB66 21066 evaluation board
- EB66+ EB66+ 21066 evaluation board
LX164 AlphaPC164-LX
Miata Personal Workstation 433/500/600 a/au
Marvel AlphaServer ES47 / ES80 / GS1280
Mikasa AS 1000
- Noname AXPpci33, UDB (Multia)
Noritake AS 1000A, AS 600A, AS 800
PC164 AlphaPC164
Rawhide AS 1200, AS 4000, AS 4100
@@ -135,27 +127,6 @@ config ALPHA_ALCOR
all the work required to support an external Bcache and to maintain
memory coherence when a PCI device DMAs into (or out of) memory.
-config ALPHA_XL
- bool "Alpha-XL"
- help
- XL-233 and XL-266-based Alpha systems.
-
-config ALPHA_BOOK1
- bool "AlphaBook1"
- help
- Dec AlphaBook1/Burns Alpha-based laptops.
-
-config ALPHA_AVANTI_CH
- bool "Avanti"
-
-config ALPHA_CABRIOLET
- bool "Cabriolet"
- help
- Cabriolet AlphaPC64, AlphaPCI64 systems. Derived from EB64+ but now
- baby-AT with Flash boot ROM, no on-board SCSI or Ethernet. 3 ISA
- slots, 4 PCI slots (one pair are on a shared slot), uses plug-in
- Bcache SIMMs. Requires power supply with 3.3V output.
-
config ALPHA_DP264
bool "DP264"
help
@@ -173,23 +144,6 @@ config ALPHA_EB164
MOUSE (PS2 style), RTC/NVRAM. Boot ROM is Flash. PC-AT-sized
motherboard. Requires power supply with 3.3V output.
-config ALPHA_EB64P_CH
- bool "EB64+"
-
-config ALPHA_EB66
- bool "EB66"
- help
- A Digital DS group board. Uses 21066 or 21066A. I/O sub-system is
- identical to EB64+. Baby PC-AT size. Runs from standard PC power
- supply. The EB66 schematic was published as a marketing poster
- advertising the 21066 as "the first microprocessor in the world with
- embedded PCI".
-
-config ALPHA_EB66P
- bool "EB66+"
- help
- Later variant of the EB66 board.
-
config ALPHA_EIGER
bool "Eiger"
help
@@ -224,9 +178,6 @@ config ALPHA_NAUTILUS
help
Alpha systems based on the AMD 751 & ALI 1543C chipsets.
-config ALPHA_NONAME_CH
- bool "Noname"
-
config ALPHA_NORITAKE
bool "Noritake"
select HAVE_EISA
@@ -237,9 +188,6 @@ config ALPHA_NORITAKE
config ALPHA_PC164
bool "PC164"
-config ALPHA_P2K
- bool "Platform2000"
-
config ALPHA_RAWHIDE
bool "Rawhide"
select HAVE_EISA
@@ -303,53 +251,16 @@ config ISA_DMA_API
bool
default y
-config ALPHA_NONAME
- bool
- depends on ALPHA_BOOK1 || ALPHA_NONAME_CH
- default y
- help
- The AXPpci33 (aka NoName), is based on the EB66 (includes the Multia
- UDB). This design was produced by Digital's Technical OEM (TOEM)
- group. It uses the 21066 processor running at 166MHz or 233MHz. It
- is a baby-AT size, and runs from a standard PC power supply. It has
- 5 ISA slots and 3 PCI slots (one pair are a shared slot). There are
- 2 versions, with either PS/2 or large DIN connectors for the
- keyboard.
-
config ALPHA_EV4
bool
- depends on ALPHA_NORITAKE && !ALPHA_PRIMO || ALPHA_MIKASA && !ALPHA_PRIMO || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL || ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
- default y
-
-config ALPHA_LCA
- bool
- depends on ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
- default y
-
-config ALPHA_APECS
- bool
- depends on !ALPHA_PRIMO && (ALPHA_NORITAKE || ALPHA_MIKASA) || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL
- default y
-
-config ALPHA_EB64P
- bool
- depends on ALPHA_CABRIOLET || ALPHA_EB64P_CH
- default y
- help
- Uses 21064 or 21064A and APECs. Has ISA and PCI expansion (3 ISA,
- 2 PCI, one pair are on a shared slot). Supports 36-bit DRAM SIMs.
- ISA bus generated by Intel SaturnI/O PCI-ISA bridge. On-board SCSI
- (NCR 810 on PCI) Ethernet (Digital 21040), KBD, MOUSE (PS2 style),
- SuperI/O (2S, 1P, FD), RTC/NVRAM. Boot ROM is EPROM. PC-AT size.
- Runs from standard PC power supply.
config ALPHA_EV5
bool
- default y if ALPHA_RX164 || ALPHA_RAWHIDE || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_SABLE || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
+ default y if ALPHA_RX164 || ALPHA_RAWHIDE || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_SABLE || ALPHA_NORITAKE || ALPHA_MIKASA || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
config ALPHA_CIA
bool
- depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
+ depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_NORITAKE || ALPHA_MIKASA || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
default y
config ALPHA_EV56
@@ -358,18 +269,12 @@ config ALPHA_EV56
config ALPHA_EV56
prompt "EV56 CPU (speed >= 333MHz)?"
- depends on ALPHA_NORITAKE || ALPHA_PRIMO
+ depends on ALPHA_NORITAKE || ALPHA_MIKASA
config ALPHA_EV56
prompt "EV56 CPU (speed >= 400MHz)?"
depends on ALPHA_RAWHIDE
-config ALPHA_PRIMO
- bool "EV5 CPU daughtercard (model 5/xxx)?"
- depends on ALPHA_NORITAKE || ALPHA_MIKASA
- help
- Say Y if you have an AS 1000 5/xxx or an AS 1000A 5/xxx.
-
config ALPHA_T2
bool
depends on ALPHA_SABLE
@@ -416,15 +321,6 @@ config GENERIC_HWEIGHT
bool
default y if !ALPHA_EV67
-config ALPHA_AVANTI
- bool
- depends on ALPHA_XL || ALPHA_AVANTI_CH
- default y
- help
- Avanti AS 200, AS 205, AS 250, AS 255, AS 300, and AS 400-based
- Alphas. Info at
- <http://www.unix-ag.org/Linux-Alpha/Architectures/Avanti.html>.
-
config ALPHA_BROKEN_IRQ_MASK
bool
depends on ALPHA_GENERIC || ALPHA_PC164
@@ -454,7 +350,7 @@ config ALPHA_QEMU
config ALPHA_SRM
- bool "Use SRM as bootloader" if ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS || ALPHA_NONAME
+ bool "Use SRM as bootloader" if ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS
depends on TTY
default y if ALPHA_MIKASA || ALPHA_SABLE || ALPHA_NORITAKE || ALPHA_DP264 || ALPHA_RAWHIDE || ALPHA_EIGER || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
help
@@ -518,7 +414,7 @@ config ARCH_SPARSEMEM_ENABLE
config ALPHA_WTINT
bool "Use WTINT" if ALPHA_SRM || ALPHA_GENERIC
default y if ALPHA_QEMU
- default n if ALPHA_EV5 || ALPHA_EV56 || (ALPHA_EV4 && !ALPHA_LCA)
+ default n if ALPHA_EV5 || ALPHA_EV56
default n if !ALPHA_SRM && !ALPHA_GENERIC
default y if SMP
help
diff --git a/arch/alpha/include/asm/core_apecs.h b/arch/alpha/include/asm/core_apecs.h
deleted file mode 100644
index 69a2fc62c9c3..000000000000
--- a/arch/alpha/include/asm/core_apecs.h
+++ /dev/null
@@ -1,534 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ALPHA_APECS__H__
-#define __ALPHA_APECS__H__
-
-#include <linux/types.h>
-#include <asm/compiler.h>
-
-/*
- * APECS is the internal name for the 2107x chipset which provides
- * memory controller and PCI access for the 21064 chip based systems.
- *
- * This file is based on:
- *
- * DECchip 21071-AA and DECchip 21072-AA Core Logic Chipsets
- * Data Sheet
- *
- * EC-N0648-72
- *
- *
- * david.rusling@....mts.dec.com Initial Version.
- *
- */
-
-/*
- An AVANTI *might* be an XL, and an XL has only 27 bits of ISA address
- that get passed through the PCI<->ISA bridge chip. So we've gotta use
- both windows to max out the physical memory we can DMA to. Sigh...
-
- If we try a window at 0 for 1GB as a work-around, we run into conflicts
- with ISA/PCI bus memory which can't be relocated, like VGA aperture and
- BIOS ROMs. So we must put the windows high enough to avoid these areas.
-
- We put window 1 at BUS 64Mb for 64Mb, mapping physical 0 to 64Mb-1,
- and window 2 at BUS 1Gb for 1Gb, mapping physical 0 to 1Gb-1.
- Yes, this does map 0 to 64Mb-1 twice, but only window 1 will actually
- be used for that range (via virt_to_bus()).
-
- Note that we actually fudge the window 1 maximum as 48Mb instead of 64Mb,
- to keep virt_to_bus() from returning an address in the first window, for
- a data area that goes beyond the 64Mb first DMA window. Sigh...
- The fudge factor MUST match with <asm/dma.h> MAX_DMA_ADDRESS, but
- we can't just use that here, because of header file looping... :-(
-
- Window 1 will be used for all DMA from the ISA bus; yes, that does
- limit what memory an ISA floppy or sound card or Ethernet can touch, but
- it's also a known limitation on other platforms as well. We use the
- same technique that is used on INTEL platforms with similar limitation:
- set MAX_DMA_ADDRESS and clear some pages' DMAable flags during mem_init().
- We trust that any ISA bus device drivers will *always* ask for DMAable
- memory explicitly via kmalloc()/get_free_pages() flags arguments.
-
- Note that most PCI bus devices' drivers do *not* explicitly ask for
- DMAable memory; they count on being able to DMA to any memory they
- get from kmalloc()/get_free_pages(). They will also use window 1 for
- any physical memory accesses below 64Mb; the rest will be handled by
- window 2, maxing out at 1Gb of memory. I trust this is enough... :-)
-
- We hope that the area before the first window is large enough so that
- there will be no overlap at the top end (64Mb). We *must* locate the
- PCI cards' memory just below window 1, so that there's still the
- possibility of being able to access it via SPARSE space. This is
- important for cards such as the Matrox Millennium, whose Xserver
- wants to access memory-mapped registers in byte and short lengths.
-
- Note that the XL is treated differently from the AVANTI, even though
- for most other things they are identical. It didn't seem reasonable to
- make the AVANTI support pay for the limitations of the XL. It is true,
- however, that an XL kernel will run on an AVANTI without problems.
-
- %%% All of this should be obviated by the ability to route
- everything through the iommu.
-*/
-
-/*
- * 21071-DA Control and Status registers.
- * These are used for PCI memory access.
- */
-#define APECS_IOC_DCSR (IDENT_ADDR + 0x1A0000000UL)
-#define APECS_IOC_PEAR (IDENT_ADDR + 0x1A0000020UL)
-#define APECS_IOC_SEAR (IDENT_ADDR + 0x1A0000040UL)
-#define APECS_IOC_DR1 (IDENT_ADDR + 0x1A0000060UL)
-#define APECS_IOC_DR2 (IDENT_ADDR + 0x1A0000080UL)
-#define APECS_IOC_DR3 (IDENT_ADDR + 0x1A00000A0UL)
-
-#define APECS_IOC_TB1R (IDENT_ADDR + 0x1A00000C0UL)
-#define APECS_IOC_TB2R (IDENT_ADDR + 0x1A00000E0UL)
-
-#define APECS_IOC_PB1R (IDENT_ADDR + 0x1A0000100UL)
-#define APECS_IOC_PB2R (IDENT_ADDR + 0x1A0000120UL)
-
-#define APECS_IOC_PM1R (IDENT_ADDR + 0x1A0000140UL)
-#define APECS_IOC_PM2R (IDENT_ADDR + 0x1A0000160UL)
-
-#define APECS_IOC_HAXR0 (IDENT_ADDR + 0x1A0000180UL)
-#define APECS_IOC_HAXR1 (IDENT_ADDR + 0x1A00001A0UL)
-#define APECS_IOC_HAXR2 (IDENT_ADDR + 0x1A00001C0UL)
-
-#define APECS_IOC_PMLT (IDENT_ADDR + 0x1A00001E0UL)
-
-#define APECS_IOC_TLBTAG0 (IDENT_ADDR + 0x1A0000200UL)
-#define APECS_IOC_TLBTAG1 (IDENT_ADDR + 0x1A0000220UL)
-#define APECS_IOC_TLBTAG2 (IDENT_ADDR + 0x1A0000240UL)
-#define APECS_IOC_TLBTAG3 (IDENT_ADDR + 0x1A0000260UL)
-#define APECS_IOC_TLBTAG4 (IDENT_ADDR + 0x1A0000280UL)
-#define APECS_IOC_TLBTAG5 (IDENT_ADDR + 0x1A00002A0UL)
-#define APECS_IOC_TLBTAG6 (IDENT_ADDR + 0x1A00002C0UL)
-#define APECS_IOC_TLBTAG7 (IDENT_ADDR + 0x1A00002E0UL)
-
-#define APECS_IOC_TLBDATA0 (IDENT_ADDR + 0x1A0000300UL)
-#define APECS_IOC_TLBDATA1 (IDENT_ADDR + 0x1A0000320UL)
-#define APECS_IOC_TLBDATA2 (IDENT_ADDR + 0x1A0000340UL)
-#define APECS_IOC_TLBDATA3 (IDENT_ADDR + 0x1A0000360UL)
-#define APECS_IOC_TLBDATA4 (IDENT_ADDR + 0x1A0000380UL)
-#define APECS_IOC_TLBDATA5 (IDENT_ADDR + 0x1A00003A0UL)
-#define APECS_IOC_TLBDATA6 (IDENT_ADDR + 0x1A00003C0UL)
-#define APECS_IOC_TLBDATA7 (IDENT_ADDR + 0x1A00003E0UL)
-
-#define APECS_IOC_TBIA (IDENT_ADDR + 0x1A0000400UL)
-
-
-/*
- * 21071-CA Control and Status registers.
- * These are used to program memory timing,
- * configure memory and initialise the B-Cache.
- */
-#define APECS_MEM_GCR (IDENT_ADDR + 0x180000000UL)
-#define APECS_MEM_EDSR (IDENT_ADDR + 0x180000040UL)
-#define APECS_MEM_TAR (IDENT_ADDR + 0x180000060UL)
-#define APECS_MEM_ELAR (IDENT_ADDR + 0x180000080UL)
-#define APECS_MEM_EHAR (IDENT_ADDR + 0x1800000a0UL)
-#define APECS_MEM_SFT_RST (IDENT_ADDR + 0x1800000c0UL)
-#define APECS_MEM_LDxLAR (IDENT_ADDR + 0x1800000e0UL)
-#define APECS_MEM_LDxHAR (IDENT_ADDR + 0x180000100UL)
-#define APECS_MEM_GTR (IDENT_ADDR + 0x180000200UL)
-#define APECS_MEM_RTR (IDENT_ADDR + 0x180000220UL)
-#define APECS_MEM_VFPR (IDENT_ADDR + 0x180000240UL)
-#define APECS_MEM_PDLDR (IDENT_ADDR + 0x180000260UL)
-#define APECS_MEM_PDhDR (IDENT_ADDR + 0x180000280UL)
-
-/* Bank x Base Address Register */
-#define APECS_MEM_B0BAR (IDENT_ADDR + 0x180000800UL)
-#define APECS_MEM_B1BAR (IDENT_ADDR + 0x180000820UL)
-#define APECS_MEM_B2BAR (IDENT_ADDR + 0x180000840UL)
-#define APECS_MEM_B3BAR (IDENT_ADDR + 0x180000860UL)
-#define APECS_MEM_B4BAR (IDENT_ADDR + 0x180000880UL)
-#define APECS_MEM_B5BAR (IDENT_ADDR + 0x1800008A0UL)
-#define APECS_MEM_B6BAR (IDENT_ADDR + 0x1800008C0UL)
-#define APECS_MEM_B7BAR (IDENT_ADDR + 0x1800008E0UL)
-#define APECS_MEM_B8BAR (IDENT_ADDR + 0x180000900UL)
-
-/* Bank x Configuration Register */
-#define APECS_MEM_B0BCR (IDENT_ADDR + 0x180000A00UL)
-#define APECS_MEM_B1BCR (IDENT_ADDR + 0x180000A20UL)
-#define APECS_MEM_B2BCR (IDENT_ADDR + 0x180000A40UL)
-#define APECS_MEM_B3BCR (IDENT_ADDR + 0x180000A60UL)
-#define APECS_MEM_B4BCR (IDENT_ADDR + 0x180000A80UL)
-#define APECS_MEM_B5BCR (IDENT_ADDR + 0x180000AA0UL)
-#define APECS_MEM_B6BCR (IDENT_ADDR + 0x180000AC0UL)
-#define APECS_MEM_B7BCR (IDENT_ADDR + 0x180000AE0UL)
-#define APECS_MEM_B8BCR (IDENT_ADDR + 0x180000B00UL)
-
-/* Bank x Timing Register A */
-#define APECS_MEM_B0TRA (IDENT_ADDR + 0x180000C00UL)
-#define APECS_MEM_B1TRA (IDENT_ADDR + 0x180000C20UL)
-#define APECS_MEM_B2TRA (IDENT_ADDR + 0x180000C40UL)
-#define APECS_MEM_B3TRA (IDENT_ADDR + 0x180000C60UL)
-#define APECS_MEM_B4TRA (IDENT_ADDR + 0x180000C80UL)
-#define APECS_MEM_B5TRA (IDENT_ADDR + 0x180000CA0UL)
-#define APECS_MEM_B6TRA (IDENT_ADDR + 0x180000CC0UL)
-#define APECS_MEM_B7TRA (IDENT_ADDR + 0x180000CE0UL)
-#define APECS_MEM_B8TRA (IDENT_ADDR + 0x180000D00UL)
-
-/* Bank x Timing Register B */
-#define APECS_MEM_B0TRB (IDENT_ADDR + 0x180000E00UL)
-#define APECS_MEM_B1TRB (IDENT_ADDR + 0x180000E20UL)
-#define APECS_MEM_B2TRB (IDENT_ADDR + 0x180000E40UL)
-#define APECS_MEM_B3TRB (IDENT_ADDR + 0x180000E60UL)
-#define APECS_MEM_B4TRB (IDENT_ADDR + 0x180000E80UL)
-#define APECS_MEM_B5TRB (IDENT_ADDR + 0x180000EA0UL)
-#define APECS_MEM_B6TRB (IDENT_ADDR + 0x180000EC0UL)
-#define APECS_MEM_B7TRB (IDENT_ADDR + 0x180000EE0UL)
-#define APECS_MEM_B8TRB (IDENT_ADDR + 0x180000F00UL)
-
-
-/*
- * Memory spaces:
- */
-#define APECS_IACK_SC (IDENT_ADDR + 0x1b0000000UL)
-#define APECS_CONF (IDENT_ADDR + 0x1e0000000UL)
-#define APECS_IO (IDENT_ADDR + 0x1c0000000UL)
-#define APECS_SPARSE_MEM (IDENT_ADDR + 0x200000000UL)
-#define APECS_DENSE_MEM (IDENT_ADDR + 0x300000000UL)
-
-
-/*
- * Bit definitions for I/O Controller status register 0:
- */
-#define APECS_IOC_STAT0_CMD 0xf
-#define APECS_IOC_STAT0_ERR (1<<4)
-#define APECS_IOC_STAT0_LOST (1<<5)
-#define APECS_IOC_STAT0_THIT (1<<6)
-#define APECS_IOC_STAT0_TREF (1<<7)
-#define APECS_IOC_STAT0_CODE_SHIFT 8
-#define APECS_IOC_STAT0_CODE_MASK 0x7
-#define APECS_IOC_STAT0_P_NBR_SHIFT 13
-#define APECS_IOC_STAT0_P_NBR_MASK 0x7ffff
-
-#define APECS_HAE_ADDRESS APECS_IOC_HAXR1
-
-
-/*
- * Data structure for handling APECS machine checks:
- */
-
-struct el_apecs_mikasa_sysdata_mcheck
-{
- unsigned long coma_gcr;
- unsigned long coma_edsr;
- unsigned long coma_ter;
- unsigned long coma_elar;
- unsigned long coma_ehar;
- unsigned long coma_ldlr;
- unsigned long coma_ldhr;
- unsigned long coma_base0;
- unsigned long coma_base1;
- unsigned long coma_base2;
- unsigned long coma_base3;
- unsigned long coma_cnfg0;
- unsigned long coma_cnfg1;
- unsigned long coma_cnfg2;
- unsigned long coma_cnfg3;
- unsigned long epic_dcsr;
- unsigned long epic_pear;
- unsigned long epic_sear;
- unsigned long epic_tbr1;
- unsigned long epic_tbr2;
- unsigned long epic_pbr1;
- unsigned long epic_pbr2;
- unsigned long epic_pmr1;
- unsigned long epic_pmr2;
- unsigned long epic_harx1;
- unsigned long epic_harx2;
- unsigned long epic_pmlt;
- unsigned long epic_tag0;
- unsigned long epic_tag1;
- unsigned long epic_tag2;
- unsigned long epic_tag3;
- unsigned long epic_tag4;
- unsigned long epic_tag5;
- unsigned long epic_tag6;
- unsigned long epic_tag7;
- unsigned long epic_data0;
- unsigned long epic_data1;
- unsigned long epic_data2;
- unsigned long epic_data3;
- unsigned long epic_data4;
- unsigned long epic_data5;
- unsigned long epic_data6;
- unsigned long epic_data7;
-
- unsigned long pceb_vid;
- unsigned long pceb_did;
- unsigned long pceb_revision;
- unsigned long pceb_command;
- unsigned long pceb_status;
- unsigned long pceb_latency;
- unsigned long pceb_control;
- unsigned long pceb_arbcon;
- unsigned long pceb_arbpri;
-
- unsigned long esc_id;
- unsigned long esc_revision;
- unsigned long esc_int0;
- unsigned long esc_int1;
- unsigned long esc_elcr0;
- unsigned long esc_elcr1;
- unsigned long esc_last_eisa;
- unsigned long esc_nmi_stat;
-
- unsigned long pci_ir;
- unsigned long pci_imr;
- unsigned long svr_mgr;
-};
-
-/* This for the normal APECS machines. */
-struct el_apecs_sysdata_mcheck
-{
- unsigned long coma_gcr;
- unsigned long coma_edsr;
- unsigned long coma_ter;
- unsigned long coma_elar;
- unsigned long coma_ehar;
- unsigned long coma_ldlr;
- unsigned long coma_ldhr;
- unsigned long coma_base0;
- unsigned long coma_base1;
- unsigned long coma_base2;
- unsigned long coma_cnfg0;
- unsigned long coma_cnfg1;
- unsigned long coma_cnfg2;
- unsigned long epic_dcsr;
- unsigned long epic_pear;
- unsigned long epic_sear;
- unsigned long epic_tbr1;
- unsigned long epic_tbr2;
- unsigned long epic_pbr1;
- unsigned long epic_pbr2;
- unsigned long epic_pmr1;
- unsigned long epic_pmr2;
- unsigned long epic_harx1;
- unsigned long epic_harx2;
- unsigned long epic_pmlt;
- unsigned long epic_tag0;
- unsigned long epic_tag1;
- unsigned long epic_tag2;
- unsigned long epic_tag3;
- unsigned long epic_tag4;
- unsigned long epic_tag5;
- unsigned long epic_tag6;
- unsigned long epic_tag7;
- unsigned long epic_data0;
- unsigned long epic_data1;
- unsigned long epic_data2;
- unsigned long epic_data3;
- unsigned long epic_data4;
- unsigned long epic_data5;
- unsigned long epic_data6;
- unsigned long epic_data7;
-};
-
-struct el_apecs_procdata
-{
- unsigned long paltemp[32]; /* PAL TEMP REGS. */
- /* EV4-specific fields */
- unsigned long exc_addr; /* Address of excepting instruction. */
- unsigned long exc_sum; /* Summary of arithmetic traps. */
- unsigned long exc_mask; /* Exception mask (from exc_sum). */
- unsigned long iccsr; /* IBox hardware enables. */
- unsigned long pal_base; /* Base address for PALcode. */
- unsigned long hier; /* Hardware Interrupt Enable. */
- unsigned long hirr; /* Hardware Interrupt Request. */
- unsigned long csr; /* D-stream fault info. */
- unsigned long dc_stat; /* D-cache status (ECC/Parity Err). */
- unsigned long dc_addr; /* EV3 Phys Addr for ECC/DPERR. */
- unsigned long abox_ctl; /* ABox Control Register. */
- unsigned long biu_stat; /* BIU Status. */
- unsigned long biu_addr; /* BUI Address. */
- unsigned long biu_ctl; /* BIU Control. */
- unsigned long fill_syndrome;/* For correcting ECC errors. */
- unsigned long fill_addr; /* Cache block which was being read */
- unsigned long va; /* Effective VA of fault or miss. */
- unsigned long bc_tag; /* Backup Cache Tag Probe Results.*/
-};
-
-
-#ifdef __KERNEL__
-
-#ifndef __EXTERN_INLINE
-#define __EXTERN_INLINE extern inline
-#define __IO_EXTERN_INLINE
-#endif
-
-/*
- * I/O functions:
- *
- * Unlike Jensen, the APECS machines have no concept of local
- * I/O---everything goes over the PCI bus.
- *
- * There is plenty room for optimization here. In particular,
- * the Alpha's insb/insw/extb/extw should be useful in moving
- * data to/from the right byte-lanes.
- */
-
-#define vip volatile int __force *
-#define vuip volatile unsigned int __force *
-#define vulp volatile unsigned long __force *
-
-#define APECS_SET_HAE \
- do { \
- if (addr >= (1UL << 24)) { \
- unsigned long msb = addr & 0xf8000000; \
- addr -= msb; \
- set_hae(msb); \
- } \
- } while (0)
-
-__EXTERN_INLINE u8 apecs_ioread8(const void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- unsigned long result, base_and_type;
-
- if (addr >= APECS_DENSE_MEM) {
- addr -= APECS_DENSE_MEM;
- APECS_SET_HAE;
- base_and_type = APECS_SPARSE_MEM + 0x00;
- } else {
- addr -= APECS_IO;
- base_and_type = APECS_IO + 0x00;
- }
-
- result = *(vip) ((addr << 5) + base_and_type);
- return __kernel_extbl(result, addr & 3);
-}
-
-__EXTERN_INLINE void apecs_iowrite8(u8 b, void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- unsigned long w, base_and_type;
-
- if (addr >= APECS_DENSE_MEM) {
- addr -= APECS_DENSE_MEM;
- APECS_SET_HAE;
- base_and_type = APECS_SPARSE_MEM + 0x00;
- } else {
- addr -= APECS_IO;
- base_and_type = APECS_IO + 0x00;
- }
-
- w = __kernel_insbl(b, addr & 3);
- *(vuip) ((addr << 5) + base_and_type) = w;
-}
-
-__EXTERN_INLINE u16 apecs_ioread16(const void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- unsigned long result, base_and_type;
-
- if (addr >= APECS_DENSE_MEM) {
- addr -= APECS_DENSE_MEM;
- APECS_SET_HAE;
- base_and_type = APECS_SPARSE_MEM + 0x08;
- } else {
- addr -= APECS_IO;
- base_and_type = APECS_IO + 0x08;
- }
-
- result = *(vip) ((addr << 5) + base_and_type);
- return __kernel_extwl(result, addr & 3);
-}
-
-__EXTERN_INLINE void apecs_iowrite16(u16 b, void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- unsigned long w, base_and_type;
-
- if (addr >= APECS_DENSE_MEM) {
- addr -= APECS_DENSE_MEM;
- APECS_SET_HAE;
- base_and_type = APECS_SPARSE_MEM + 0x08;
- } else {
- addr -= APECS_IO;
- base_and_type = APECS_IO + 0x08;
- }
-
- w = __kernel_inswl(b, addr & 3);
- *(vuip) ((addr << 5) + base_and_type) = w;
-}
-
-__EXTERN_INLINE u32 apecs_ioread32(const void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- if (addr < APECS_DENSE_MEM)
- addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18;
- return *(vuip)addr;
-}
-
-__EXTERN_INLINE void apecs_iowrite32(u32 b, void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- if (addr < APECS_DENSE_MEM)
- addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18;
- *(vuip)addr = b;
-}
-
-__EXTERN_INLINE u64 apecs_ioread64(const void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- if (addr < APECS_DENSE_MEM)
- addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18;
- return *(vulp)addr;
-}
-
-__EXTERN_INLINE void apecs_iowrite64(u64 b, void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- if (addr < APECS_DENSE_MEM)
- addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18;
- *(vulp)addr = b;
-}
-
-__EXTERN_INLINE void __iomem *apecs_ioportmap(unsigned long addr)
-{
- return (void __iomem *)(addr + APECS_IO);
-}
-
-__EXTERN_INLINE void __iomem *apecs_ioremap(unsigned long addr,
- unsigned long size)
-{
- return (void __iomem *)(addr + APECS_DENSE_MEM);
-}
-
-__EXTERN_INLINE int apecs_is_ioaddr(unsigned long addr)
-{
- return addr >= IDENT_ADDR + 0x180000000UL;
-}
-
-__EXTERN_INLINE int apecs_is_mmio(const volatile void __iomem *addr)
-{
- return (unsigned long)addr >= APECS_DENSE_MEM;
-}
-
-#undef APECS_SET_HAE
-
-#undef vip
-#undef vuip
-#undef vulp
-
-#undef __IO_PREFIX
-#define __IO_PREFIX apecs
-#define apecs_trivial_io_bw 0
-#define apecs_trivial_io_lq 0
-#define apecs_trivial_rw_bw 2
-#define apecs_trivial_rw_lq 1
-#define apecs_trivial_iounmap 1
-#include <asm/io_trivial.h>
-
-#ifdef __IO_EXTERN_INLINE
-#undef __EXTERN_INLINE
-#undef __IO_EXTERN_INLINE
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_APECS__H__ */
diff --git a/arch/alpha/include/asm/core_lca.h b/arch/alpha/include/asm/core_lca.h
deleted file mode 100644
index d8c3e72ef8f6..000000000000
--- a/arch/alpha/include/asm/core_lca.h
+++ /dev/null
@@ -1,378 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ALPHA_LCA__H__
-#define __ALPHA_LCA__H__
-
-#include <asm/compiler.h>
-#include <asm/mce.h>
-
-/*
- * Low Cost Alpha (LCA) definitions (these apply to 21066 and 21068,
- * for example).
- *
- * This file is based on:
- *
- * DECchip 21066 and DECchip 21068 Alpha AXP Microprocessors
- * Hardware Reference Manual; Digital Equipment Corp.; May 1994;
- * Maynard, MA; Order Number: EC-N2681-71.
- */
-
-/*
- * NOTE: The LCA uses a Host Address Extension (HAE) register to access
- * PCI addresses that are beyond the first 27 bits of address
- * space. Updating the HAE requires an external cycle (and
- * a memory barrier), which tends to be slow. Instead of updating
- * it on each sparse memory access, we keep the current HAE value
- * cached in variable cache_hae. Only if the cached HAE differs
- * from the desired HAE value do we actually updated HAE register.
- * The HAE register is preserved by the interrupt handler entry/exit
- * code, so this scheme works even in the presence of interrupts.
- *
- * Dense memory space doesn't require the HAE, but is restricted to
- * aligned 32 and 64 bit accesses. Special Cycle and Interrupt
- * Acknowledge cycles may also require the use of the HAE. The LCA
- * limits I/O address space to the bottom 24 bits of address space,
- * but this easily covers the 16 bit ISA I/O address space.
- */
-
-/*
- * NOTE 2! The memory operations do not set any memory barriers, as
- * it's not needed for cases like a frame buffer that is essentially
- * memory-like. You need to do them by hand if the operations depend
- * on ordering.
- *
- * Similarly, the port I/O operations do a "mb" only after a write
- * operation: if an mb is needed before (as in the case of doing
- * memory mapped I/O first, and then a port I/O operation to the same
- * device), it needs to be done by hand.
- *
- * After the above has bitten me 100 times, I'll give up and just do
- * the mb all the time, but right now I'm hoping this will work out.
- * Avoiding mb's may potentially be a noticeable speed improvement,
- * but I can't honestly say I've tested it.
- *
- * Handling interrupts that need to do mb's to synchronize to
- * non-interrupts is another fun race area. Don't do it (because if
- * you do, I'll have to do *everything* with interrupts disabled,
- * ugh).
- */
-
-/*
- * Memory Controller registers:
- */
-#define LCA_MEM_BCR0 (IDENT_ADDR + 0x120000000UL)
-#define LCA_MEM_BCR1 (IDENT_ADDR + 0x120000008UL)
-#define LCA_MEM_BCR2 (IDENT_ADDR + 0x120000010UL)
-#define LCA_MEM_BCR3 (IDENT_ADDR + 0x120000018UL)
-#define LCA_MEM_BMR0 (IDENT_ADDR + 0x120000020UL)
-#define LCA_MEM_BMR1 (IDENT_ADDR + 0x120000028UL)
-#define LCA_MEM_BMR2 (IDENT_ADDR + 0x120000030UL)
-#define LCA_MEM_BMR3 (IDENT_ADDR + 0x120000038UL)
-#define LCA_MEM_BTR0 (IDENT_ADDR + 0x120000040UL)
-#define LCA_MEM_BTR1 (IDENT_ADDR + 0x120000048UL)
-#define LCA_MEM_BTR2 (IDENT_ADDR + 0x120000050UL)
-#define LCA_MEM_BTR3 (IDENT_ADDR + 0x120000058UL)
-#define LCA_MEM_GTR (IDENT_ADDR + 0x120000060UL)
-#define LCA_MEM_ESR (IDENT_ADDR + 0x120000068UL)
-#define LCA_MEM_EAR (IDENT_ADDR + 0x120000070UL)
-#define LCA_MEM_CAR (IDENT_ADDR + 0x120000078UL)
-#define LCA_MEM_VGR (IDENT_ADDR + 0x120000080UL)
-#define LCA_MEM_PLM (IDENT_ADDR + 0x120000088UL)
-#define LCA_MEM_FOR (IDENT_ADDR + 0x120000090UL)
-
-/*
- * I/O Controller registers:
- */
-#define LCA_IOC_HAE (IDENT_ADDR + 0x180000000UL)
-#define LCA_IOC_CONF (IDENT_ADDR + 0x180000020UL)
-#define LCA_IOC_STAT0 (IDENT_ADDR + 0x180000040UL)
-#define LCA_IOC_STAT1 (IDENT_ADDR + 0x180000060UL)
-#define LCA_IOC_TBIA (IDENT_ADDR + 0x180000080UL)
-#define LCA_IOC_TB_ENA (IDENT_ADDR + 0x1800000a0UL)
-#define LCA_IOC_SFT_RST (IDENT_ADDR + 0x1800000c0UL)
-#define LCA_IOC_PAR_DIS (IDENT_ADDR + 0x1800000e0UL)
-#define LCA_IOC_W_BASE0 (IDENT_ADDR + 0x180000100UL)
-#define LCA_IOC_W_BASE1 (IDENT_ADDR + 0x180000120UL)
-#define LCA_IOC_W_MASK0 (IDENT_ADDR + 0x180000140UL)
-#define LCA_IOC_W_MASK1 (IDENT_ADDR + 0x180000160UL)
-#define LCA_IOC_T_BASE0 (IDENT_ADDR + 0x180000180UL)
-#define LCA_IOC_T_BASE1 (IDENT_ADDR + 0x1800001a0UL)
-#define LCA_IOC_TB_TAG0 (IDENT_ADDR + 0x188000000UL)
-#define LCA_IOC_TB_TAG1 (IDENT_ADDR + 0x188000020UL)
-#define LCA_IOC_TB_TAG2 (IDENT_ADDR + 0x188000040UL)
-#define LCA_IOC_TB_TAG3 (IDENT_ADDR + 0x188000060UL)
-#define LCA_IOC_TB_TAG4 (IDENT_ADDR + 0x188000070UL)
-#define LCA_IOC_TB_TAG5 (IDENT_ADDR + 0x1880000a0UL)
-#define LCA_IOC_TB_TAG6 (IDENT_ADDR + 0x1880000c0UL)
-#define LCA_IOC_TB_TAG7 (IDENT_ADDR + 0x1880000e0UL)
-
-/*
- * Memory spaces:
- */
-#define LCA_IACK_SC (IDENT_ADDR + 0x1a0000000UL)
-#define LCA_CONF (IDENT_ADDR + 0x1e0000000UL)
-#define LCA_IO (IDENT_ADDR + 0x1c0000000UL)
-#define LCA_SPARSE_MEM (IDENT_ADDR + 0x200000000UL)
-#define LCA_DENSE_MEM (IDENT_ADDR + 0x300000000UL)
-
-/*
- * Bit definitions for I/O Controller status register 0:
- */
-#define LCA_IOC_STAT0_CMD 0xf
-#define LCA_IOC_STAT0_ERR (1<<4)
-#define LCA_IOC_STAT0_LOST (1<<5)
-#define LCA_IOC_STAT0_THIT (1<<6)
-#define LCA_IOC_STAT0_TREF (1<<7)
-#define LCA_IOC_STAT0_CODE_SHIFT 8
-#define LCA_IOC_STAT0_CODE_MASK 0x7
-#define LCA_IOC_STAT0_P_NBR_SHIFT 13
-#define LCA_IOC_STAT0_P_NBR_MASK 0x7ffff
-
-#define LCA_HAE_ADDRESS LCA_IOC_HAE
-
-/* LCA PMR Power Management register defines */
-#define LCA_PMR_ADDR (IDENT_ADDR + 0x120000098UL)
-#define LCA_PMR_PDIV 0x7 /* Primary clock divisor */
-#define LCA_PMR_ODIV 0x38 /* Override clock divisor */
-#define LCA_PMR_INTO 0x40 /* Interrupt override */
-#define LCA_PMR_DMAO 0x80 /* DMA override */
-#define LCA_PMR_OCCEB 0xffff0000L /* Override cycle counter - even bits */
-#define LCA_PMR_OCCOB 0xffff000000000000L /* Override cycle counter - even bits */
-#define LCA_PMR_PRIMARY_MASK 0xfffffffffffffff8L
-
-/* LCA PMR Macros */
-
-#define LCA_READ_PMR (*(volatile unsigned long *)LCA_PMR_ADDR)
-#define LCA_WRITE_PMR(d) (*((volatile unsigned long *)LCA_PMR_ADDR) = (d))
-
-#define LCA_GET_PRIMARY(r) ((r) & LCA_PMR_PDIV)
-#define LCA_GET_OVERRIDE(r) (((r) >> 3) & LCA_PMR_PDIV)
-#define LCA_SET_PRIMARY_CLOCK(r, c) ((r) = (((r) & LCA_PMR_PRIMARY_MASK)|(c)))
-
-/* LCA PMR Divisor values */
-#define LCA_PMR_DIV_1 0x0
-#define LCA_PMR_DIV_1_5 0x1
-#define LCA_PMR_DIV_2 0x2
-#define LCA_PMR_DIV_4 0x3
-#define LCA_PMR_DIV_8 0x4
-#define LCA_PMR_DIV_16 0x5
-#define LCA_PMR_DIV_MIN DIV_1
-#define LCA_PMR_DIV_MAX DIV_16
-
-
-/*
- * Data structure for handling LCA machine checks. Correctable errors
- * result in a short logout frame, uncorrectable ones in a long one.
- */
-struct el_lca_mcheck_short {
- struct el_common h; /* common logout header */
- unsigned long esr; /* error-status register */
- unsigned long ear; /* error-address register */
- unsigned long dc_stat; /* dcache status register */
- unsigned long ioc_stat0; /* I/O controller status register 0 */
- unsigned long ioc_stat1; /* I/O controller status register 1 */
-};
-
-struct el_lca_mcheck_long {
- struct el_common h; /* common logout header */
- unsigned long pt[31]; /* PAL temps */
- unsigned long exc_addr; /* exception address */
- unsigned long pad1[3];
- unsigned long pal_base; /* PALcode base address */
- unsigned long hier; /* hw interrupt enable */
- unsigned long hirr; /* hw interrupt request */
- unsigned long mm_csr; /* MMU control & status */
- unsigned long dc_stat; /* data cache status */
- unsigned long dc_addr; /* data cache addr register */
- unsigned long abox_ctl; /* address box control register */
- unsigned long esr; /* error status register */
- unsigned long ear; /* error address register */
- unsigned long car; /* cache control register */
- unsigned long ioc_stat0; /* I/O controller status register 0 */
- unsigned long ioc_stat1; /* I/O controller status register 1 */
- unsigned long va; /* virtual address register */
-};
-
-union el_lca {
- struct el_common * c;
- struct el_lca_mcheck_long * l;
- struct el_lca_mcheck_short * s;
-};
-
-#ifdef __KERNEL__
-
-#ifndef __EXTERN_INLINE
-#define __EXTERN_INLINE extern inline
-#define __IO_EXTERN_INLINE
-#endif
-
-/*
- * I/O functions:
- *
- * Unlike Jensen, the Noname machines have no concept of local
- * I/O---everything goes over the PCI bus.
- *
- * There is plenty room for optimization here. In particular,
- * the Alpha's insb/insw/extb/extw should be useful in moving
- * data to/from the right byte-lanes.
- */
-
-#define vip volatile int __force *
-#define vuip volatile unsigned int __force *
-#define vulp volatile unsigned long __force *
-
-#define LCA_SET_HAE \
- do { \
- if (addr >= (1UL << 24)) { \
- unsigned long msb = addr & 0xf8000000; \
- addr -= msb; \
- set_hae(msb); \
- } \
- } while (0)
-
-
-__EXTERN_INLINE u8 lca_ioread8(const void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- unsigned long result, base_and_type;
-
- if (addr >= LCA_DENSE_MEM) {
- addr -= LCA_DENSE_MEM;
- LCA_SET_HAE;
- base_and_type = LCA_SPARSE_MEM + 0x00;
- } else {
- addr -= LCA_IO;
- base_and_type = LCA_IO + 0x00;
- }
-
- result = *(vip) ((addr << 5) + base_and_type);
- return __kernel_extbl(result, addr & 3);
-}
-
-__EXTERN_INLINE void lca_iowrite8(u8 b, void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- unsigned long w, base_and_type;
-
- if (addr >= LCA_DENSE_MEM) {
- addr -= LCA_DENSE_MEM;
- LCA_SET_HAE;
- base_and_type = LCA_SPARSE_MEM + 0x00;
- } else {
- addr -= LCA_IO;
- base_and_type = LCA_IO + 0x00;
- }
-
- w = __kernel_insbl(b, addr & 3);
- *(vuip) ((addr << 5) + base_and_type) = w;
-}
-
-__EXTERN_INLINE u16 lca_ioread16(const void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- unsigned long result, base_and_type;
-
- if (addr >= LCA_DENSE_MEM) {
- addr -= LCA_DENSE_MEM;
- LCA_SET_HAE;
- base_and_type = LCA_SPARSE_MEM + 0x08;
- } else {
- addr -= LCA_IO;
- base_and_type = LCA_IO + 0x08;
- }
-
- result = *(vip) ((addr << 5) + base_and_type);
- return __kernel_extwl(result, addr & 3);
-}
-
-__EXTERN_INLINE void lca_iowrite16(u16 b, void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- unsigned long w, base_and_type;
-
- if (addr >= LCA_DENSE_MEM) {
- addr -= LCA_DENSE_MEM;
- LCA_SET_HAE;
- base_and_type = LCA_SPARSE_MEM + 0x08;
- } else {
- addr -= LCA_IO;
- base_and_type = LCA_IO + 0x08;
- }
-
- w = __kernel_inswl(b, addr & 3);
- *(vuip) ((addr << 5) + base_and_type) = w;
-}
-
-__EXTERN_INLINE u32 lca_ioread32(const void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- if (addr < LCA_DENSE_MEM)
- addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18;
- return *(vuip)addr;
-}
-
-__EXTERN_INLINE void lca_iowrite32(u32 b, void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- if (addr < LCA_DENSE_MEM)
- addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18;
- *(vuip)addr = b;
-}
-
-__EXTERN_INLINE u64 lca_ioread64(const void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- if (addr < LCA_DENSE_MEM)
- addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18;
- return *(vulp)addr;
-}
-
-__EXTERN_INLINE void lca_iowrite64(u64 b, void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- if (addr < LCA_DENSE_MEM)
- addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18;
- *(vulp)addr = b;
-}
-
-__EXTERN_INLINE void __iomem *lca_ioportmap(unsigned long addr)
-{
- return (void __iomem *)(addr + LCA_IO);
-}
-
-__EXTERN_INLINE void __iomem *lca_ioremap(unsigned long addr,
- unsigned long size)
-{
- return (void __iomem *)(addr + LCA_DENSE_MEM);
-}
-
-__EXTERN_INLINE int lca_is_ioaddr(unsigned long addr)
-{
- return addr >= IDENT_ADDR + 0x120000000UL;
-}
-
-__EXTERN_INLINE int lca_is_mmio(const volatile void __iomem *addr)
-{
- return (unsigned long)addr >= LCA_DENSE_MEM;
-}
-
-#undef vip
-#undef vuip
-#undef vulp
-
-#undef __IO_PREFIX
-#define __IO_PREFIX lca
-#define lca_trivial_rw_bw 2
-#define lca_trivial_rw_lq 1
-#define lca_trivial_io_bw 0
-#define lca_trivial_io_lq 0
-#define lca_trivial_iounmap 1
-#include <asm/io_trivial.h>
-
-#ifdef __IO_EXTERN_INLINE
-#undef __EXTERN_INLINE
-#undef __IO_EXTERN_INLINE
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_LCA__H__ */
diff --git a/arch/alpha/include/asm/dma.h b/arch/alpha/include/asm/dma.h
index a04d76b96089..3a88812b7165 100644
--- a/arch/alpha/include/asm/dma.h
+++ b/arch/alpha/include/asm/dma.h
@@ -82,11 +82,6 @@
just a wiring limit.
*/
-/* The maximum address for ISA DMA transfer on Alpha XL, due to an
- hardware SIO limitation, is 64MB.
-*/
-#define ALPHA_XL_MAX_ISA_DMA_ADDRESS 0x04000000UL
-
/* The maximum address for ISA DMA transfer on RUFFIAN,
due to an hardware SIO limitation, is 16MB.
*/
@@ -107,9 +102,7 @@
#ifdef CONFIG_ALPHA_GENERIC
# define MAX_ISA_DMA_ADDRESS (alpha_mv.max_isa_dma_address)
#else
-# if defined(CONFIG_ALPHA_XL)
-# define MAX_ISA_DMA_ADDRESS ALPHA_XL_MAX_ISA_DMA_ADDRESS
-# elif defined(CONFIG_ALPHA_RUFFIAN)
+# if defined(CONFIG_ALPHA_RUFFIAN)
# define MAX_ISA_DMA_ADDRESS ALPHA_RUFFIAN_MAX_ISA_DMA_ADDRESS
# elif defined(CONFIG_ALPHA_SABLE)
# define MAX_ISA_DMA_ADDRESS ALPHA_SABLE_MAX_ISA_DMA_ADDRESS
diff --git a/arch/alpha/include/asm/io.h b/arch/alpha/include/asm/io.h
index 0c54ddb5b33e..2bb8cbeedf91 100644
--- a/arch/alpha/include/asm/io.h
+++ b/arch/alpha/include/asm/io.h
@@ -203,14 +203,10 @@ static inline int generic_is_mmio(const volatile void __iomem *a)
#else
-#if defined(CONFIG_ALPHA_APECS)
-# include <asm/core_apecs.h>
-#elif defined(CONFIG_ALPHA_CIA)
+#if defined(CONFIG_ALPHA_CIA)
# include <asm/core_cia.h>
#elif defined(CONFIG_ALPHA_IRONGATE)
# include <asm/core_irongate.h>
-#elif defined(CONFIG_ALPHA_LCA)
-# include <asm/core_lca.h>
#elif defined(CONFIG_ALPHA_MARVEL)
# include <asm/core_marvel.h>
#elif defined(CONFIG_ALPHA_MCPCIA)
diff --git a/arch/alpha/include/asm/irq.h b/arch/alpha/include/asm/irq.h
index 442097c56934..e7d22357a5a6 100644
--- a/arch/alpha/include/asm/irq.h
+++ b/arch/alpha/include/asm/irq.h
@@ -31,16 +31,12 @@
# define NR_IRQS (32768 + 16) /* marvel - 32 pids */
# endif
-#elif defined(CONFIG_ALPHA_CABRIOLET) || \
- defined(CONFIG_ALPHA_EB66P) || \
- defined(CONFIG_ALPHA_EB164) || \
+#elif defined(CONFIG_ALPHA_EB164) || \
defined(CONFIG_ALPHA_PC164) || \
defined(CONFIG_ALPHA_LX164)
# define NR_IRQS 35
-#elif defined(CONFIG_ALPHA_EB66) || \
- defined(CONFIG_ALPHA_EB64P) || \
- defined(CONFIG_ALPHA_MIKASA)
+#elif defined(CONFIG_ALPHA_MIKASA)
# define NR_IRQS 32
#elif defined(CONFIG_ALPHA_ALCOR) || \
diff --git a/arch/alpha/kernel/Makefile b/arch/alpha/kernel/Makefile
index 706ce8625e35..bd5d62fa4a9a 100644
--- a/arch/alpha/kernel/Makefile
+++ b/arch/alpha/kernel/Makefile
@@ -22,14 +22,14 @@ obj-$(CONFIG_AUDIT) += audit.o
ifdef CONFIG_ALPHA_GENERIC
-obj-y += core_apecs.o core_cia.o core_irongate.o core_lca.o \
+obj-y += core_cia.o core_irongate.o \
core_mcpcia.o core_polaris.o core_t2.o \
core_tsunami.o
-obj-y += sys_alcor.o sys_cabriolet.o sys_dp264.o sys_eb64p.o sys_eiger.o \
+obj-y += sys_alcor.o sys_cabriolet.o sys_dp264.o sys_eiger.o \
sys_miata.o sys_mikasa.o sys_nautilus.o \
sys_noritake.o sys_rawhide.o sys_ruffian.o sys_rx164.o \
- sys_sable.o sys_sio.o sys_sx164.o sys_takara.o
+ sys_sable.o sys_sx164.o sys_takara.o
ifndef CONFIG_ALPHA_LEGACY_START_ADDRESS
obj-y += core_marvel.o core_titan.o core_wildfire.o
@@ -48,10 +48,8 @@ else
obj-$(CONFIG_ALPHA_SRM) += srmcons.o
# Core logic support
-obj-$(CONFIG_ALPHA_APECS) += core_apecs.o
obj-$(CONFIG_ALPHA_CIA) += core_cia.o
obj-$(CONFIG_ALPHA_IRONGATE) += core_irongate.o
-obj-$(CONFIG_ALPHA_LCA) += core_lca.o
obj-$(CONFIG_ALPHA_MARVEL) += core_marvel.o gct.o
obj-$(CONFIG_ALPHA_MCPCIA) += core_mcpcia.o
obj-$(CONFIG_ALPHA_POLARIS) += core_polaris.o
@@ -62,12 +60,8 @@ obj-$(CONFIG_ALPHA_WILDFIRE) += core_wildfire.o
# Board support
obj-$(CONFIG_ALPHA_ALCOR) += sys_alcor.o irq_i8259.o irq_srm.o
-obj-$(CONFIG_ALPHA_CABRIOLET) += sys_cabriolet.o irq_i8259.o irq_srm.o \
- pc873xx.o
obj-$(CONFIG_ALPHA_EB164) += sys_cabriolet.o irq_i8259.o irq_srm.o \
pc873xx.o
-obj-$(CONFIG_ALPHA_EB66P) += sys_cabriolet.o irq_i8259.o irq_srm.o \
- pc873xx.o
obj-$(CONFIG_ALPHA_LX164) += sys_cabriolet.o irq_i8259.o irq_srm.o \
smc37c93x.o
obj-$(CONFIG_ALPHA_PC164) += sys_cabriolet.o irq_i8259.o irq_srm.o \
@@ -75,8 +69,6 @@ obj-$(CONFIG_ALPHA_PC164) += sys_cabriolet.o irq_i8259.o irq_srm.o \
obj-$(CONFIG_ALPHA_DP264) += sys_dp264.o irq_i8259.o es1888.o smc37c669.o
obj-$(CONFIG_ALPHA_SHARK) += sys_dp264.o irq_i8259.o es1888.o smc37c669.o
obj-$(CONFIG_ALPHA_TITAN) += sys_titan.o irq_i8259.o smc37c669.o
-obj-$(CONFIG_ALPHA_EB64P) += sys_eb64p.o irq_i8259.o
-obj-$(CONFIG_ALPHA_EB66) += sys_eb64p.o irq_i8259.o
obj-$(CONFIG_ALPHA_EIGER) += sys_eiger.o irq_i8259.o
obj-$(CONFIG_ALPHA_MARVEL) += sys_marvel.o
obj-$(CONFIG_ALPHA_MIATA) += sys_miata.o irq_pyxis.o irq_i8259.o \
@@ -88,11 +80,6 @@ obj-$(CONFIG_ALPHA_RAWHIDE) += sys_rawhide.o irq_i8259.o
obj-$(CONFIG_ALPHA_RUFFIAN) += sys_ruffian.o irq_pyxis.o irq_i8259.o
obj-$(CONFIG_ALPHA_RX164) += sys_rx164.o irq_i8259.o
obj-$(CONFIG_ALPHA_SABLE) += sys_sable.o
-obj-$(CONFIG_ALPHA_BOOK1) += sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
-obj-$(CONFIG_ALPHA_AVANTI) += sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
-obj-$(CONFIG_ALPHA_NONAME) += sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
-obj-$(CONFIG_ALPHA_P2K) += sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
-obj-$(CONFIG_ALPHA_XL) += sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
obj-$(CONFIG_ALPHA_SX164) += sys_sx164.o irq_pyxis.o irq_i8259.o \
irq_srm.o smc37c669.o
obj-$(CONFIG_ALPHA_TAKARA) += sys_takara.o irq_i8259.o pc873xx.o
diff --git a/arch/alpha/kernel/core_apecs.c b/arch/alpha/kernel/core_apecs.c
deleted file mode 100644
index 6df765ff2b10..000000000000
--- a/arch/alpha/kernel/core_apecs.c
+++ /dev/null
@@ -1,420 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/alpha/kernel/core_apecs.c
- *
- * Rewritten for Apecs from the lca.c from:
- *
- * Written by David Mosberger (davidm@...arizona.edu) with some code
- * taken from Dave Rusling's (david.rusling@....mts.dec.com) 32-bit
- * bios code.
- *
- * Code common to all APECS core logic chips.
- */
-
-#define __EXTERN_INLINE inline
-#include <asm/io.h>
-#include <asm/core_apecs.h>
-#undef __EXTERN_INLINE
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-
-#include <asm/ptrace.h>
-#include <asm/smp.h>
-#include <asm/mce.h>
-
-#include "proto.h"
-#include "pci_impl.h"
-
-/*
- * NOTE: Herein lie back-to-back mb instructions. They are magic.
- * One plausible explanation is that the i/o controller does not properly
- * handle the system transaction. Another involves timing. Ho hum.
- */
-
-/*
- * BIOS32-style PCI interface:
- */
-
-#define DEBUG_CONFIG 0
-
-#if DEBUG_CONFIG
-# define DBGC(args) printk args
-#else
-# define DBGC(args)
-#endif
-
-#define vuip volatile unsigned int *
-
-/*
- * Given a bus, device, and function number, compute resulting
- * configuration space address and setup the APECS_HAXR2 register
- * accordingly. It is therefore not safe to have concurrent
- * invocations to configuration space access routines, but there
- * really shouldn't be any need for this.
- *
- * Type 0:
- *
- * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
- * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | | | | | | | | | | | | | | |F|F|F|R|R|R|R|R|R|0|0|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- * 31:11 Device select bit.
- * 10:8 Function number
- * 7:2 Register number
- *
- * Type 1:
- *
- * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
- * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- * 31:24 reserved
- * 23:16 bus number (8 bits = 128 possible buses)
- * 15:11 Device number (5 bits)
- * 10:8 function number
- * 7:2 register number
- *
- * Notes:
- * The function number selects which function of a multi-function device
- * (e.g., SCSI and Ethernet).
- *
- * The register selects a DWORD (32 bit) register offset. Hence it
- * doesn't get shifted by 2 bits as we want to "drop" the bottom two
- * bits.
- */
-
-static int
-mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
- unsigned long *pci_addr, unsigned char *type1)
-{
- unsigned long addr;
- u8 bus = pbus->number;
-
- DBGC(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x,"
- " pci_addr=0x%p, type1=0x%p)\n",
- bus, device_fn, where, pci_addr, type1));
-
- if (bus == 0) {
- int device = device_fn >> 3;
-
- /* type 0 configuration cycle: */
-
- if (device > 20) {
- DBGC(("mk_conf_addr: device (%d) > 20, returning -1\n",
- device));
- return -1;
- }
-
- *type1 = 0;
- addr = (device_fn << 8) | (where);
- } else {
- /* type 1 configuration cycle: */
- *type1 = 1;
- addr = (bus << 16) | (device_fn << 8) | (where);
- }
- *pci_addr = addr;
- DBGC(("mk_conf_addr: returning pci_addr 0x%lx\n", addr));
- return 0;
-}
-
-static unsigned int
-conf_read(unsigned long addr, unsigned char type1)
-{
- unsigned long flags;
- unsigned int stat0, value;
- unsigned int haxr2 = 0;
-
- local_irq_save(flags); /* avoid getting hit by machine check */
-
- DBGC(("conf_read(addr=0x%lx, type1=%d)\n", addr, type1));
-
- /* Reset status register to avoid losing errors. */
- stat0 = *(vuip)APECS_IOC_DCSR;
- *(vuip)APECS_IOC_DCSR = stat0;
- mb();
- DBGC(("conf_read: APECS DCSR was 0x%x\n", stat0));
-
- /* If Type1 access, must set HAE #2. */
- if (type1) {
- haxr2 = *(vuip)APECS_IOC_HAXR2;
- mb();
- *(vuip)APECS_IOC_HAXR2 = haxr2 | 1;
- DBGC(("conf_read: TYPE1 access\n"));
- }
-
- draina();
- mcheck_expected(0) = 1;
- mcheck_taken(0) = 0;
- mb();
-
- /* Access configuration space. */
-
- /* Some SRMs step on these registers during a machine check. */
- asm volatile("ldl %0,%1; mb; mb" : "=r"(value) : "m"(*(vuip)addr)
- : "$9", "$10", "$11", "$12", "$13", "$14", "memory");
-
- if (mcheck_taken(0)) {
- mcheck_taken(0) = 0;
- value = 0xffffffffU;
- mb();
- }
- mcheck_expected(0) = 0;
- mb();
-
-#if 1
- /*
- * david.rusling@....mts.dec.com. This code is needed for the
- * EB64+ as it does not generate a machine check (why I don't
- * know). When we build kernels for one particular platform
- * then we can make this conditional on the type.
- */
- draina();
-
- /* Now look for any errors. */
- stat0 = *(vuip)APECS_IOC_DCSR;
- DBGC(("conf_read: APECS DCSR after read 0x%x\n", stat0));
-
- /* Is any error bit set? */
- if (stat0 & 0xffe0U) {
- /* If not NDEV, print status. */
- if (!(stat0 & 0x0800)) {
- printk("apecs.c:conf_read: got stat0=%x\n", stat0);
- }
-
- /* Reset error status. */
- *(vuip)APECS_IOC_DCSR = stat0;
- mb();
- wrmces(0x7); /* reset machine check */
- value = 0xffffffff;
- }
-#endif
-
- /* If Type1 access, must reset HAE #2 so normal IO space ops work. */
- if (type1) {
- *(vuip)APECS_IOC_HAXR2 = haxr2 & ~1;
- mb();
- }
- local_irq_restore(flags);
-
- return value;
-}
-
-static void
-conf_write(unsigned long addr, unsigned int value, unsigned char type1)
-{
- unsigned long flags;
- unsigned int stat0;
- unsigned int haxr2 = 0;
-
- local_irq_save(flags); /* avoid getting hit by machine check */
-
- /* Reset status register to avoid losing errors. */
- stat0 = *(vuip)APECS_IOC_DCSR;
- *(vuip)APECS_IOC_DCSR = stat0;
- mb();
-
- /* If Type1 access, must set HAE #2. */
- if (type1) {
- haxr2 = *(vuip)APECS_IOC_HAXR2;
- mb();
- *(vuip)APECS_IOC_HAXR2 = haxr2 | 1;
- }
-
- draina();
- mcheck_expected(0) = 1;
- mb();
-
- /* Access configuration space. */
- *(vuip)addr = value;
- mb();
- mb(); /* magic */
- mcheck_expected(0) = 0;
- mb();
-
-#if 1
- /*
- * david.rusling@....mts.dec.com. This code is needed for the
- * EB64+ as it does not generate a machine check (why I don't
- * know). When we build kernels for one particular platform
- * then we can make this conditional on the type.
- */
- draina();
-
- /* Now look for any errors. */
- stat0 = *(vuip)APECS_IOC_DCSR;
-
- /* Is any error bit set? */
- if (stat0 & 0xffe0U) {
- /* If not NDEV, print status. */
- if (!(stat0 & 0x0800)) {
- printk("apecs.c:conf_write: got stat0=%x\n", stat0);
- }
-
- /* Reset error status. */
- *(vuip)APECS_IOC_DCSR = stat0;
- mb();
- wrmces(0x7); /* reset machine check */
- }
-#endif
-
- /* If Type1 access, must reset HAE #2 so normal IO space ops work. */
- if (type1) {
- *(vuip)APECS_IOC_HAXR2 = haxr2 & ~1;
- mb();
- }
- local_irq_restore(flags);
-}
-
-static int
-apecs_read_config(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 *value)
-{
- unsigned long addr, pci_addr;
- unsigned char type1;
- long mask;
- int shift;
-
- if (mk_conf_addr(bus, devfn, where, &pci_addr, &type1))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- mask = (size - 1) * 8;
- shift = (where & 3) * 8;
- addr = (pci_addr << 5) + mask + APECS_CONF;
- *value = conf_read(addr, type1) >> (shift);
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-apecs_write_config(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 value)
-{
- unsigned long addr, pci_addr;
- unsigned char type1;
- long mask;
-
- if (mk_conf_addr(bus, devfn, where, &pci_addr, &type1))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- mask = (size - 1) * 8;
- addr = (pci_addr << 5) + mask + APECS_CONF;
- conf_write(addr, value << ((where & 3) * 8), type1);
- return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops apecs_pci_ops =
-{
- .read = apecs_read_config,
- .write = apecs_write_config,
-};
-.
-void
-apecs_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
-{
- wmb();
- *(vip)APECS_IOC_TBIA = 0;
- mb();
-}
-.
-void __init
-apecs_init_arch(void)
-{
- struct pci_controller *hose;
-
- /*
- * Create our single hose.
- */
-
- pci_isa_hose = hose = alloc_pci_controller();
- hose->io_space = &ioport_resource;
- hose->mem_space = &iomem_resource;
- hose->index = 0;
-
- hose->sparse_mem_base = APECS_SPARSE_MEM - IDENT_ADDR;
- hose->dense_mem_base = APECS_DENSE_MEM - IDENT_ADDR;
- hose->sparse_io_base = APECS_IO - IDENT_ADDR;
- hose->dense_io_base = 0;
-
- /*
- * Set up the PCI to main memory translation windows.
- *
- * Window 1 is direct access 1GB at 1GB
- * Window 2 is scatter-gather 8MB at 8MB (for isa)
- */
- hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000,
- SMP_CACHE_BYTES);
- hose->sg_pci = NULL;
- __direct_map_base = 0x40000000;
- __direct_map_size = 0x40000000;
-
- *(vuip)APECS_IOC_PB1R = __direct_map_base | 0x00080000;
- *(vuip)APECS_IOC_PM1R = (__direct_map_size - 1) & 0xfff00000U;
- *(vuip)APECS_IOC_TB1R = 0;
-
- *(vuip)APECS_IOC_PB2R = hose->sg_isa->dma_base | 0x000c0000;
- *(vuip)APECS_IOC_PM2R = (hose->sg_isa->size - 1) & 0xfff00000;
- *(vuip)APECS_IOC_TB2R = virt_to_phys(hose->sg_isa->ptes) >> 1;
-
- apecs_pci_tbi(hose, 0, -1);
-
- /*
- * Finally, clear the HAXR2 register, which gets used
- * for PCI Config Space accesses. That is the way
- * we want to use it, and we do not want to depend on
- * what ARC or SRM might have left behind...
- */
- *(vuip)APECS_IOC_HAXR2 = 0;
- mb();
-}
-
-void
-apecs_pci_clr_err(void)
-{
- unsigned int jd;
-
- jd = *(vuip)APECS_IOC_DCSR;
- if (jd & 0xffe0L) {
- *(vuip)APECS_IOC_SEAR;
- *(vuip)APECS_IOC_DCSR = jd | 0xffe1L;
- mb();
- *(vuip)APECS_IOC_DCSR;
- }
- *(vuip)APECS_IOC_TBIA = (unsigned int)APECS_IOC_TBIA;
- mb();
- *(vuip)APECS_IOC_TBIA;
-}
-
-void
-apecs_machine_check(unsigned long vector, unsigned long la_ptr)
-{
- struct el_common *mchk_header;
- struct el_apecs_procdata *mchk_procdata;
- struct el_apecs_sysdata_mcheck *mchk_sysdata;
-
- mchk_header = (struct el_common *)la_ptr;
-
- mchk_procdata = (struct el_apecs_procdata *)
- (la_ptr + mchk_header->proc_offset
- - sizeof(mchk_procdata->paltemp));
-
- mchk_sysdata = (struct el_apecs_sysdata_mcheck *)
- (la_ptr + mchk_header->sys_offset);
-
-
- /* Clear the error before any reporting. */
- mb();
- mb(); /* magic */
- draina();
- apecs_pci_clr_err();
- wrmces(0x7); /* reset machine check pending flag */
- mb();
-
- process_mcheck_info(vector, la_ptr, "APECS",
- (mcheck_expected(0)
- && (mchk_sysdata->epic_dcsr & 0x0c00UL)));
-}
diff --git a/arch/alpha/kernel/core_lca.c b/arch/alpha/kernel/core_lca.c
deleted file mode 100644
index 4616b11643d5..000000000000
--- a/arch/alpha/kernel/core_lca.c
+++ /dev/null
@@ -1,473 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/alpha/kernel/core_lca.c
- *
- * Written by David Mosberger (davidm@...arizona.edu) with some code
- * taken from Dave Rusling's (david.rusling@....mts.dec.com) 32-bit
- * bios code.
- *
- * Code common to all LCA core logic chips.
- */
-
-#define __EXTERN_INLINE inline
-#include <asm/io.h>
-#include <asm/core_lca.h>
-#undef __EXTERN_INLINE
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-
-#include <asm/ptrace.h>
-#include <asm/irq_regs.h>
-#include <asm/smp.h>
-
-#include "proto.h"
-#include "pci_impl.h"
-
-
-/*
- * BIOS32-style PCI interface:
- */
-
-/*
- * Machine check reasons. Defined according to PALcode sources
- * (osf.h and platform.h).
- */
-#define MCHK_K_TPERR 0x0080
-#define MCHK_K_TCPERR 0x0082
-#define MCHK_K_HERR 0x0084
-#define MCHK_K_ECC_C 0x0086
-#define MCHK_K_ECC_NC 0x0088
-#define MCHK_K_UNKNOWN 0x008A
-#define MCHK_K_CACKSOFT 0x008C
-#define MCHK_K_BUGCHECK 0x008E
-#define MCHK_K_OS_BUGCHECK 0x0090
-#define MCHK_K_DCPERR 0x0092
-#define MCHK_K_ICPERR 0x0094
-
-
-/*
- * Platform-specific machine-check reasons:
- */
-#define MCHK_K_SIO_SERR 0x204 /* all platforms so far */
-#define MCHK_K_SIO_IOCHK 0x206 /* all platforms so far */
-#define MCHK_K_DCSR 0x208 /* all but Noname */
-
-
-/*
- * Given a bus, device, and function number, compute resulting
- * configuration space address and setup the LCA_IOC_CONF register
- * accordingly. It is therefore not safe to have concurrent
- * invocations to configuration space access routines, but there
- * really shouldn't be any need for this.
- *
- * Type 0:
- *
- * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
- * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | | | | | | | | | | | | | | |F|F|F|R|R|R|R|R|R|0|0|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- * 31:11 Device select bit.
- * 10:8 Function number
- * 7:2 Register number
- *
- * Type 1:
- *
- * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
- * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- * 31:24 reserved
- * 23:16 bus number (8 bits = 128 possible buses)
- * 15:11 Device number (5 bits)
- * 10:8 function number
- * 7:2 register number
- *
- * Notes:
- * The function number selects which function of a multi-function device
- * (e.g., SCSI and Ethernet).
- *
- * The register selects a DWORD (32 bit) register offset. Hence it
- * doesn't get shifted by 2 bits as we want to "drop" the bottom two
- * bits.
- */
-
-static int
-mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
- unsigned long *pci_addr)
-{
- unsigned long addr;
- u8 bus = pbus->number;
-
- if (bus == 0) {
- int device = device_fn >> 3;
- int func = device_fn & 0x7;
-
- /* Type 0 configuration cycle. */
-
- if (device > 12) {
- return -1;
- }
-
- *(vulp)LCA_IOC_CONF = 0;
- addr = (1 << (11 + device)) | (func << 8) | where;
- } else {
- /* Type 1 configuration cycle. */
- *(vulp)LCA_IOC_CONF = 1;
- addr = (bus << 16) | (device_fn << 8) | where;
- }
- *pci_addr = addr;
- return 0;
-}
-
-static unsigned int
-conf_read(unsigned long addr)
-{
- unsigned long flags, code, stat0;
- unsigned int value;
-
- local_irq_save(flags);
-
- /* Reset status register to avoid losing errors. */
- stat0 = *(vulp)LCA_IOC_STAT0;
- *(vulp)LCA_IOC_STAT0 = stat0;
- mb();
-
- /* Access configuration space. */
- value = *(vuip)addr;
- draina();
-
- stat0 = *(vulp)LCA_IOC_STAT0;
- if (stat0 & LCA_IOC_STAT0_ERR) {
- code = ((stat0 >> LCA_IOC_STAT0_CODE_SHIFT)
- & LCA_IOC_STAT0_CODE_MASK);
- if (code != 1) {
- printk("lca.c:conf_read: got stat0=%lx\n", stat0);
- }
-
- /* Reset error status. */
- *(vulp)LCA_IOC_STAT0 = stat0;
- mb();
-
- /* Reset machine check. */
- wrmces(0x7);
-
- value = 0xffffffff;
- }
- local_irq_restore(flags);
- return value;
-}
-
-static void
-conf_write(unsigned long addr, unsigned int value)
-{
- unsigned long flags, code, stat0;
-
- local_irq_save(flags); /* avoid getting hit by machine check */
-
- /* Reset status register to avoid losing errors. */
- stat0 = *(vulp)LCA_IOC_STAT0;
- *(vulp)LCA_IOC_STAT0 = stat0;
- mb();
-
- /* Access configuration space. */
- *(vuip)addr = value;
- draina();
-
- stat0 = *(vulp)LCA_IOC_STAT0;
- if (stat0 & LCA_IOC_STAT0_ERR) {
- code = ((stat0 >> LCA_IOC_STAT0_CODE_SHIFT)
- & LCA_IOC_STAT0_CODE_MASK);
- if (code != 1) {
- printk("lca.c:conf_write: got stat0=%lx\n", stat0);
- }
-
- /* Reset error status. */
- *(vulp)LCA_IOC_STAT0 = stat0;
- mb();
-
- /* Reset machine check. */
- wrmces(0x7);
- }
- local_irq_restore(flags);
-}
-
-static int
-lca_read_config(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 *value)
-{
- unsigned long addr, pci_addr;
- long mask;
- int shift;
-
- if (mk_conf_addr(bus, devfn, where, &pci_addr))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- shift = (where & 3) * 8;
- mask = (size - 1) * 8;
- addr = (pci_addr << 5) + mask + LCA_CONF;
- *value = conf_read(addr) >> (shift);
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-lca_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
- u32 value)
-{
- unsigned long addr, pci_addr;
- long mask;
-
- if (mk_conf_addr(bus, devfn, where, &pci_addr))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- mask = (size - 1) * 8;
- addr = (pci_addr << 5) + mask + LCA_CONF;
- conf_write(addr, value << ((where & 3) * 8));
- return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops lca_pci_ops =
-{
- .read = lca_read_config,
- .write = lca_write_config,
-};
-.
-void
-lca_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
-{
- wmb();
- *(vulp)LCA_IOC_TBIA = 0;
- mb();
-}
-.
-void __init
-lca_init_arch(void)
-{
- struct pci_controller *hose;
-
- /*
- * Create our single hose.
- */
-
- pci_isa_hose = hose = alloc_pci_controller();
- hose->io_space = &ioport_resource;
- hose->mem_space = &iomem_resource;
- hose->index = 0;
-
- hose->sparse_mem_base = LCA_SPARSE_MEM - IDENT_ADDR;
- hose->dense_mem_base = LCA_DENSE_MEM - IDENT_ADDR;
- hose->sparse_io_base = LCA_IO - IDENT_ADDR;
- hose->dense_io_base = 0;
-
- /*
- * Set up the PCI to main memory translation windows.
- *
- * Mimic the SRM settings for the direct-map window.
- * Window 0 is scatter-gather 8MB at 8MB (for isa).
- * Window 1 is direct access 1GB at 1GB.
- *
- * Note that we do not try to save any of the DMA window CSRs
- * before setting them, since we cannot read those CSRs on LCA.
- */
- hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000,
- SMP_CACHE_BYTES);
- hose->sg_pci = NULL;
- __direct_map_base = 0x40000000;
- __direct_map_size = 0x40000000;
-
- *(vulp)LCA_IOC_W_BASE0 = hose->sg_isa->dma_base | (3UL << 32);
- *(vulp)LCA_IOC_W_MASK0 = (hose->sg_isa->size - 1) & 0xfff00000;
- *(vulp)LCA_IOC_T_BASE0 = virt_to_phys(hose->sg_isa->ptes);
-
- *(vulp)LCA_IOC_W_BASE1 = __direct_map_base | (2UL << 32);
- *(vulp)LCA_IOC_W_MASK1 = (__direct_map_size - 1) & 0xfff00000;
- *(vulp)LCA_IOC_T_BASE1 = 0;
-
- *(vulp)LCA_IOC_TB_ENA = 0x80;
-
- lca_pci_tbi(hose, 0, -1);
-
- /*
- * Disable PCI parity for now. The NCR53c810 chip has
- * troubles meeting the PCI spec which results in
- * data parity errors.
- */
- *(vulp)LCA_IOC_PAR_DIS = 1UL<<5;
-
- /*
- * Finally, set up for restoring the correct HAE if using SRM.
- * Again, since we cannot read many of the CSRs on the LCA,
- * one of which happens to be the HAE, we save the value that
- * the SRM will expect...
- */
- if (alpha_using_srm)
- srm_hae = 0x80000000UL;
-}
-
-/*
- * Constants used during machine-check handling. I suppose these
- * could be moved into lca.h but I don't see much reason why anybody
- * else would want to use them.
- */
-
-#define ESR_EAV (1UL<< 0) /* error address valid */
-#define ESR_CEE (1UL<< 1) /* correctable error */
-#define ESR_UEE (1UL<< 2) /* uncorrectable error */
-#define ESR_WRE (1UL<< 3) /* write-error */
-#define ESR_SOR (1UL<< 4) /* error source */
-#define ESR_CTE (1UL<< 7) /* cache-tag error */
-#define ESR_MSE (1UL<< 9) /* multiple soft errors */
-#define ESR_MHE (1UL<<10) /* multiple hard errors */
-#define ESR_NXM (1UL<<12) /* non-existent memory */
-
-#define IOC_ERR ( 1<<4) /* ioc logs an error */
-#define IOC_CMD_SHIFT 0
-#define IOC_CMD (0xf<<IOC_CMD_SHIFT)
-#define IOC_CODE_SHIFT 8
-#define IOC_CODE (0xf<<IOC_CODE_SHIFT)
-#define IOC_LOST ( 1<<5)
-#define IOC_P_NBR ((__u32) ~((1<<13) - 1))
-
-static void
-mem_error(unsigned long esr, unsigned long ear)
-{
- printk(" %s %s error to %s occurred at address %x\n",
- ((esr & ESR_CEE) ? "Correctable" :
- (esr & ESR_UEE) ? "Uncorrectable" : "A"),
- (esr & ESR_WRE) ? "write" : "read",
- (esr & ESR_SOR) ? "memory" : "b-cache",
- (unsigned) (ear & 0x1ffffff8));
- if (esr & ESR_CTE) {
- printk(" A b-cache tag parity error was detected.\n");
- }
- if (esr & ESR_MSE) {
- printk(" Several other correctable errors occurred.\n");
- }
- if (esr & ESR_MHE) {
- printk(" Several other uncorrectable errors occurred.\n");
- }
- if (esr & ESR_NXM) {
- printk(" Attempted to access non-existent memory.\n");
- }
-}
-
-static void
-ioc_error(__u32 stat0, __u32 stat1)
-{
- static const char * const pci_cmd[] = {
- "Interrupt Acknowledge", "Special", "I/O Read", "I/O Write",
- "Rsvd 1", "Rsvd 2", "Memory Read", "Memory Write", "Rsvd3",
- "Rsvd4", "Configuration Read", "Configuration Write",
- "Memory Read Multiple", "Dual Address", "Memory Read Line",
- "Memory Write and Invalidate"
- };
- static const char * const err_name[] = {
- "exceeded retry limit", "no device", "bad data parity",
- "target abort", "bad address parity", "page table read error",
- "invalid page", "data error"
- };
- unsigned code = (stat0 & IOC_CODE) >> IOC_CODE_SHIFT;
- unsigned cmd = (stat0 & IOC_CMD) >> IOC_CMD_SHIFT;
-
- printk(" %s initiated PCI %s cycle to address %x"
- " failed due to %s.\n",
- code > 3 ? "PCI" : "CPU", pci_cmd[cmd], stat1, err_name[code]);
-
- if (code == 5 || code == 6) {
- printk(" (Error occurred at PCI memory address %x.)\n",
- (stat0 & ~IOC_P_NBR));
- }
- if (stat0 & IOC_LOST) {
- printk(" Other PCI errors occurred simultaneously.\n");
- }
-}
-
-void
-lca_machine_check(unsigned long vector, unsigned long la_ptr)
-{
- const char * reason;
- union el_lca el;
-
- el.c = (struct el_common *) la_ptr;
-
- wrmces(rdmces()); /* reset machine check pending flag */
-
- printk(KERN_CRIT "LCA machine check: vector=%#lx pc=%#lx code=%#x\n",
- vector, get_irq_regs()->pc, (unsigned int) el.c->code);
-
- /*
- * The first quadword after the common header always seems to
- * be the machine check reason---don't know why this isn't
- * part of the common header instead. In the case of a long
- * logout frame, the upper 32 bits is the machine check
- * revision level, which we ignore for now.
- */
- switch ((unsigned int) el.c->code) {
- case MCHK_K_TPERR: reason = "tag parity error"; break;
- case MCHK_K_TCPERR: reason = "tag control parity error"; break;
- case MCHK_K_HERR: reason = "access to non-existent memory"; break;
- case MCHK_K_ECC_C: reason = "correctable ECC error"; break;
- case MCHK_K_ECC_NC: reason = "non-correctable ECC error"; break;
- case MCHK_K_CACKSOFT: reason = "MCHK_K_CACKSOFT"; break;
- case MCHK_K_BUGCHECK: reason = "illegal exception in PAL mode"; break;
- case MCHK_K_OS_BUGCHECK: reason = "callsys in kernel mode"; break;
- case MCHK_K_DCPERR: reason = "d-cache parity error"; break;
- case MCHK_K_ICPERR: reason = "i-cache parity error"; break;
- case MCHK_K_SIO_SERR: reason = "SIO SERR occurred on PCI bus"; break;
- case MCHK_K_SIO_IOCHK: reason = "SIO IOCHK occurred on ISA bus"; break;
- case MCHK_K_DCSR: reason = "MCHK_K_DCSR"; break;
- case MCHK_K_UNKNOWN:
- default: reason = "unknown"; break;
- }
-
- switch (el.c->size) {
- case sizeof(struct el_lca_mcheck_short):
- printk(KERN_CRIT
- " Reason: %s (short frame%s, dc_stat=%#lx):\n",
- reason, el.c->retry ? ", retryable" : "",
- el.s->dc_stat);
- if (el.s->esr & ESR_EAV) {
- mem_error(el.s->esr, el.s->ear);
- }
- if (el.s->ioc_stat0 & IOC_ERR) {
- ioc_error(el.s->ioc_stat0, el.s->ioc_stat1);
- }
- break;
-
- case sizeof(struct el_lca_mcheck_long):
- printk(KERN_CRIT " Reason: %s (long frame%s):\n",
- reason, el.c->retry ? ", retryable" : "");
- printk(KERN_CRIT
- " reason: %#lx exc_addr: %#lx dc_stat: %#lx\n",
- el.l->pt[0], el.l->exc_addr, el.l->dc_stat);
- printk(KERN_CRIT " car: %#lx\n", el.l->car);
- if (el.l->esr & ESR_EAV) {
- mem_error(el.l->esr, el.l->ear);
- }
- if (el.l->ioc_stat0 & IOC_ERR) {
- ioc_error(el.l->ioc_stat0, el.l->ioc_stat1);
- }
- break;
-
- default:
- printk(KERN_CRIT " Unknown errorlog size %d\n", el.c->size);
- }
-
- /* Dump the logout area to give all info. */
-#ifdef CONFIG_VERBOSE_MCHECK
- if (alpha_verbose_mcheck > 1) {
- unsigned long * ptr = (unsigned long *) la_ptr;
- long i;
- for (i = 0; i < el.c->size / sizeof(long); i += 2) {
- printk(KERN_CRIT " +%8lx %016lx %016lx\n",
- i*sizeof(long), ptr[i], ptr[i+1]);
- }
- }
-#endif /* CONFIG_VERBOSE_MCHECK */
-}
diff --git a/arch/alpha/kernel/irq_i8259.c b/arch/alpha/kernel/irq_i8259.c
index 1dcf0d9038fd..29c6c477ac35 100644
--- a/arch/alpha/kernel/irq_i8259.c
+++ b/arch/alpha/kernel/irq_i8259.c
@@ -98,10 +98,6 @@ init_i8259a_irqs(void)
#if defined(CONFIG_ALPHA_GENERIC)
# define IACK_SC alpha_mv.iack_sc
-#elif defined(CONFIG_ALPHA_APECS)
-# define IACK_SC APECS_IACK_SC
-#elif defined(CONFIG_ALPHA_LCA)
-# define IACK_SC LCA_IACK_SC
#elif defined(CONFIG_ALPHA_CIA)
# define IACK_SC CIA_IACK_SC
#elif defined(CONFIG_ALPHA_PYXIS)
diff --git a/arch/alpha/kernel/pci_impl.h b/arch/alpha/kernel/pci_impl.h
index 18043af45e2b..a16325ce21c4 100644
--- a/arch/alpha/kernel/pci_impl.h
+++ b/arch/alpha/kernel/pci_impl.h
@@ -143,9 +143,7 @@ struct pci_iommu_arena
unsigned int align_entry;
};
-#if defined(CONFIG_ALPHA_SRM) && \
- (defined(CONFIG_ALPHA_CIA) || defined(CONFIG_ALPHA_LCA) || \
- defined(CONFIG_ALPHA_AVANTI))
+#if defined(CONFIG_ALPHA_SRM) && defined(CONFIG_ALPHA_CIA)
# define NEED_SRM_SAVE_RESTORE
#else
# undef NEED_SRM_SAVE_RESTORE
diff --git a/arch/alpha/kernel/proto.h b/arch/alpha/kernel/proto.h
index 5b1d0d71d479..a8bc3ead776b 100644
--- a/arch/alpha/kernel/proto.h
+++ b/arch/alpha/kernel/proto.h
@@ -17,13 +17,6 @@ struct pci_dev;
struct pci_controller;
struct pci_bus;
-/* core_apecs.c */
-extern struct pci_ops apecs_pci_ops;
-extern void apecs_init_arch(void);
-extern void apecs_pci_clr_err(void);
-extern void apecs_machine_check(unsigned long vector, unsigned long la_ptr);
-extern void apecs_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
-
/* core_cia.c */
extern struct pci_ops cia_pci_ops;
extern void cia_init_pci(void);
@@ -39,12 +32,6 @@ extern int irongate_pci_clr_err(void);
extern void irongate_init_arch(void);
#define irongate_pci_tbi ((void *)0)
-/* core_lca.c */
-extern struct pci_ops lca_pci_ops;
-extern void lca_init_arch(void);
-extern void lca_machine_check(unsigned long vector, unsigned long la_ptr);
-extern void lca_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
-
/* core_marvel.c */
extern struct pci_ops marvel_pci_ops;
extern void marvel_init_arch(void);
diff --git a/arch/alpha/kernel/setup.c b/arch/alpha/kernel/setup.c
index 3b833bd97817..bebdffafaee8 100644
--- a/arch/alpha/kernel/setup.c
+++ b/arch/alpha/kernel/setup.c
@@ -171,27 +171,17 @@ EXPORT_SYMBOL(__direct_map_size);
asm(".weak "#X)
WEAK(alcor_mv);
-WEAK(alphabook1_mv);
-WEAK(avanti_mv);
-WEAK(cabriolet_mv);
WEAK(clipper_mv);
WEAK(dp264_mv);
WEAK(eb164_mv);
-WEAK(eb64p_mv);
-WEAK(eb66_mv);
-WEAK(eb66p_mv);
WEAK(eiger_mv);
WEAK(lx164_mv);
WEAK(marvel_ev7_mv);
WEAK(miata_mv);
-WEAK(mikasa_mv);
WEAK(mikasa_primo_mv);
WEAK(monet_mv);
WEAK(nautilus_mv);
-WEAK(noname_mv);
-WEAK(noritake_mv);
WEAK(noritake_primo_mv);
-WEAK(p2k_mv);
WEAK(pc164_mv);
WEAK(privateer_mv);
WEAK(rawhide_mv);
@@ -204,7 +194,6 @@ WEAK(takara_mv);
WEAK(titan_mv);
WEAK(webbrick_mv);
WEAK(wildfire_mv);
-WEAK(xl_mv);
WEAK(xlt_mv);
#undef WEAK
@@ -692,12 +681,6 @@ static int eb164_indices[] = {0,0,0,1,1,1,1,1,2,2,2,2,3,3,3,3,4};
static char alcor_names[][16] = {"Alcor", "Maverick", "Bret"};
static int alcor_indices[] = {0,0,0,1,1,1,0,0,0,0,0,0,2,2,2,2,2,2};
-static char eb64p_names[][16] = {"EB64+", "Cabriolet", "AlphaPCI64"};
-static int eb64p_indices[] = {0,0,1,2};
-
-static char eb66_names[][8] = {"EB66", "EB66+"};
-static int eb66_indices[] = {0,0,1};
-
static char marvel_names[][16] = {
"Marvel/EV7"
};
@@ -736,21 +719,21 @@ get_sysvec(unsigned long type, unsigned long variation, unsigned long cpu)
NULL, /* Morgan */
NULL, /* Sable -- see below. */
NULL, /* Medulla */
- &noname_mv,
+ NULL, /* Noname */
NULL, /* Turbolaser */
- &avanti_mv,
+ NULL, /* Avanti */
NULL, /* Mustang */
NULL, /* Alcor, Bret, Maverick. HWRPB inaccurate? */
NULL, /* Tradewind */
NULL, /* Mikasa -- see below. */
NULL, /* EB64 */
- NULL, /* EB66 -- see variation. */
- NULL, /* EB64+ -- see variation. */
- &alphabook1_mv,
+ NULL, /* EB66 */
+ NULL, /* EB64+ */
+ NULL, /* Alphabook1 */
&rawhide_mv,
NULL, /* K2 */
NULL, /* Lynx */
- &xl_mv,
+ NULL, /* XL */
NULL, /* EB164 -- see variation. */
NULL, /* Noritake -- see below. */
NULL, /* Cortex */
@@ -789,19 +772,6 @@ get_sysvec(unsigned long type, unsigned long variation, unsigned long cpu)
&eb164_mv, &pc164_mv, &lx164_mv, &sx164_mv, &rx164_mv
};
- static struct alpha_machine_vector *eb64p_vecs[] __initdata =
- {
- &eb64p_mv,
- &cabriolet_mv,
- &cabriolet_mv /* AlphaPCI64 */
- };
-
- static struct alpha_machine_vector *eb66_vecs[] __initdata =
- {
- &eb66_mv,
- &eb66p_mv
- };
-
static struct alpha_machine_vector *marvel_vecs[] __initdata =
{
&marvel_ev7_mv,
@@ -869,14 +839,6 @@ get_sysvec(unsigned long type, unsigned long variation, unsigned long cpu)
if (vec == &eb164_mv && cpu == EV56_CPU)
vec = &pc164_mv;
break;
- case ST_DEC_EB64P:
- if (member < ARRAY_SIZE(eb64p_indices))
- vec = eb64p_vecs[eb64p_indices[member]];
- break;
- case ST_DEC_EB66:
- if (member < ARRAY_SIZE(eb66_indices))
- vec = eb66_vecs[eb66_indices[member]];
- break;
case ST_DEC_MARVEL:
if (member < ARRAY_SIZE(marvel_indices))
vec = marvel_vecs[marvel_indices[member]];
@@ -891,16 +853,10 @@ get_sysvec(unsigned long type, unsigned long variation, unsigned long cpu)
vec = tsunami_vecs[tsunami_indices[member]];
break;
case ST_DEC_1000:
- if (cpu == EV5_CPU || cpu == EV56_CPU)
- vec = &mikasa_primo_mv;
- else
- vec = &mikasa_mv;
+ vec = &mikasa_primo_mv;
break;
case ST_DEC_NORITAKE:
- if (cpu == EV5_CPU || cpu == EV56_CPU)
- vec = &noritake_primo_mv;
- else
- vec = &noritake_mv;
+ vec = &noritake_primo_mv;
break;
case ST_DEC_2100_A500:
vec = &sable_gamma_mv;
@@ -916,26 +872,16 @@ get_sysvec_byname(const char *name)
static struct alpha_machine_vector *all_vecs[] __initdata =
{
&alcor_mv,
- &alphabook1_mv,
- &avanti_mv,
- &cabriolet_mv,
&clipper_mv,
&dp264_mv,
&eb164_mv,
- &eb64p_mv,
- &eb66_mv,
- &eb66p_mv,
&eiger_mv,
&lx164_mv,
&miata_mv,
- &mikasa_mv,
&mikasa_primo_mv,
&monet_mv,
&nautilus_mv,
- &noname_mv,
- &noritake_mv,
&noritake_primo_mv,
- &p2k_mv,
&pc164_mv,
&privateer_mv,
&rawhide_mv,
@@ -947,7 +893,6 @@ get_sysvec_byname(const char *name)
&takara_mv,
&webbrick_mv,
&wildfire_mv,
- &xl_mv,
&xlt_mv
};
@@ -1009,14 +954,6 @@ get_sysnames(unsigned long type, unsigned long variation, unsigned long cpu,
if (member < ARRAY_SIZE(alcor_indices))
*variation_name = alcor_names[alcor_indices[member]];
break;
- case ST_DEC_EB64P:
- if (member < ARRAY_SIZE(eb64p_indices))
- *variation_name = eb64p_names[eb64p_indices[member]];
- break;
- case ST_DEC_EB66:
- if (member < ARRAY_SIZE(eb66_indices))
- *variation_name = eb66_names[eb66_indices[member]];
- break;
case ST_DEC_MARVEL:
if (member < ARRAY_SIZE(marvel_indices))
*variation_name = marvel_names[marvel_indices[member]];
diff --git a/arch/alpha/kernel/sys_cabriolet.c b/arch/alpha/kernel/sys_cabriolet.c
index 47459b73cdb7..06a950072f82 100644
--- a/arch/alpha/kernel/sys_cabriolet.c
+++ b/arch/alpha/kernel/sys_cabriolet.c
@@ -23,9 +23,7 @@
#include <asm/irq.h>
#include <asm/mmu_context.h>
#include <asm/io.h>
-#include <asm/core_apecs.h>
#include <asm/core_cia.h>
-#include <asm/core_lca.h>
#include <asm/tlbflush.h>
#include "proto.h"
@@ -232,13 +230,6 @@ cabriolet_enable_ide(void)
}
}
-static inline void __init
-cabriolet_init_pci(void)
-{
- common_init_pci();
- cabriolet_enable_ide();
-}
-
static inline void __init
cia_cab_init_pci(void)
{
@@ -317,32 +308,6 @@ alphapc164_init_pci(void)
* The System Vector
*/
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_CABRIOLET)
-struct alpha_machine_vector cabriolet_mv __initmv = {
- .vector_name = "Cabriolet",
- DO_EV4_MMU,
- DO_DEFAULT_RTC,
- DO_APECS_IO,
- .machine_check = apecs_machine_check,
- .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
- .min_io_address = DEFAULT_IO_BASE,
- .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE,
-
- .nr_irqs = 35,
- .device_interrupt = cabriolet_device_interrupt,
-
- .init_arch = apecs_init_arch,
- .init_irq = cabriolet_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = cabriolet_init_pci,
- .pci_map_irq = cabriolet_map_irq,
- .pci_swizzle = common_swizzle,
-};
-#ifndef CONFIG_ALPHA_EB64P
-ALIAS_MV(cabriolet)
-#endif
-#endif
-
#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB164)
struct alpha_machine_vector eb164_mv __initmv = {
.vector_name = "EB164",
@@ -368,30 +333,6 @@ struct alpha_machine_vector eb164_mv __initmv = {
ALIAS_MV(eb164)
#endif
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB66P)
-struct alpha_machine_vector eb66p_mv __initmv = {
- .vector_name = "EB66+",
- DO_EV4_MMU,
- DO_DEFAULT_RTC,
- DO_LCA_IO,
- .machine_check = lca_machine_check,
- .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
- .min_io_address = DEFAULT_IO_BASE,
- .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE,
-
- .nr_irqs = 35,
- .device_interrupt = cabriolet_device_interrupt,
-
- .init_arch = lca_init_arch,
- .init_irq = cabriolet_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = cabriolet_init_pci,
- .pci_map_irq = eb66p_map_irq,
- .pci_swizzle = common_swizzle,
-};
-ALIAS_MV(eb66p)
-#endif
-
#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LX164)
struct alpha_machine_vector lx164_mv __initmv = {
.vector_name = "LX164",
diff --git a/arch/alpha/kernel/sys_eb64p.c b/arch/alpha/kernel/sys_eb64p.c
deleted file mode 100644
index 3c43fd347526..000000000000
--- a/arch/alpha/kernel/sys_eb64p.c
+++ /dev/null
@@ -1,238 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/alpha/kernel/sys_eb64p.c
- *
- * Copyright (C) 1995 David A Rusling
- * Copyright (C) 1996 Jay A Estabrook
- * Copyright (C) 1998, 1999 Richard Henderson
- *
- * Code supporting the EB64+ and EB66.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-
-#include <asm/ptrace.h>
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-#include <asm/core_apecs.h>
-#include <asm/core_lca.h>
-#include <asm/hwrpb.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-
-
-/* Note mask bit is true for DISABLED irqs. */
-static unsigned int cached_irq_mask = -1;
-
-static inline void
-eb64p_update_irq_hw(unsigned int irq, unsigned long mask)
-{
- outb(mask >> (irq >= 24 ? 24 : 16), (irq >= 24 ? 0x27 : 0x26));
-}
-
-static inline void
-eb64p_enable_irq(struct irq_data *d)
-{
- eb64p_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << d->irq));
-}
-
-static void
-eb64p_disable_irq(struct irq_data *d)
-{
- eb64p_update_irq_hw(d->irq, cached_irq_mask |= 1 << d->irq);
-}
-
-static struct irq_chip eb64p_irq_type = {
- .name = "EB64P",
- .irq_unmask = eb64p_enable_irq,
- .irq_mask = eb64p_disable_irq,
- .irq_mask_ack = eb64p_disable_irq,
-};
-
-static void
-eb64p_device_interrupt(unsigned long vector)
-{
- unsigned long pld;
- unsigned int i;
-
- /* Read the interrupt summary registers */
- pld = inb(0x26) | (inb(0x27) << 8);
-
- /*
- * Now, for every possible bit set, work through
- * them and call the appropriate interrupt handler.
- */
- while (pld) {
- i = ffz(~pld);
- pld &= pld - 1; /* clear least bit set */
-
- if (i == 5) {
- isa_device_interrupt(vector);
- } else {
- handle_irq(16 + i);
- }
- }
-}
-
-static void __init
-eb64p_init_irq(void)
-{
- long i;
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_CABRIOLET)
- /*
- * CABRIO SRM may not set variation correctly, so here we test
- * the high word of the interrupt summary register for the RAZ
- * bits, and hope that a true EB64+ would read all ones...
- */
- if (inw(0x806) != 0xffff) {
- extern struct alpha_machine_vector cabriolet_mv;
-
- printk("Detected Cabriolet: correcting HWRPB.\n");
-
- hwrpb->sys_variation |= 2L << 10;
- hwrpb_update_checksum(hwrpb);
-
- alpha_mv = cabriolet_mv;
- alpha_mv.init_irq();
- return;
- }
-#endif /* GENERIC */
-
- outb(0xff, 0x26);
- outb(0xff, 0x27);
-
- init_i8259a_irqs();
-
- for (i = 16; i < 32; ++i) {
- irq_set_chip_and_handler(i, &eb64p_irq_type, handle_level_irq);
- irq_set_status_flags(i, IRQ_LEVEL);
- }
-
- common_init_isa_dma();
- if (request_irq(16 + 5, no_action, 0, "isa-cascade", NULL))
- pr_err("Failed to register isa-cascade interrupt\n");
-}
-
-/*
- * PCI Fixup configuration.
- *
- * There are two 8 bit external summary registers as follows:
- *
- * Summary @ 0x26:
- * Bit Meaning
- * 0 Interrupt Line A from slot 0
- * 1 Interrupt Line A from slot 1
- * 2 Interrupt Line B from slot 0
- * 3 Interrupt Line B from slot 1
- * 4 Interrupt Line C from slot 0
- * 5 Interrupt line from the two ISA PICs
- * 6 Tulip
- * 7 NCR SCSI
- *
- * Summary @ 0x27
- * Bit Meaning
- * 0 Interrupt Line C from slot 1
- * 1 Interrupt Line D from slot 0
- * 2 Interrupt Line D from slot 1
- * 3 RAZ
- * 4 RAZ
- * 5 RAZ
- * 6 RAZ
- * 7 RAZ
- *
- * The device to slot mapping looks like:
- *
- * Slot Device
- * 5 NCR SCSI controller
- * 6 PCI on board slot 0
- * 7 PCI on board slot 1
- * 8 Intel SIO PCI-ISA bridge chip
- * 9 Tulip - DECchip 21040 Ethernet controller
- *
- *
- * This two layered interrupt approach means that we allocate IRQ 16 and
- * above for PCI interrupts. The IRQ relates to which bit the interrupt
- * comes in on. This makes interrupt processing much easier.
- */
-
-static int
-eb64p_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- static char irq_tab[5][5] = {
- /*INT INTA INTB INTC INTD */
- {16+7, 16+7, 16+7, 16+7, 16+7}, /* IdSel 5, slot ?, ?? */
- {16+0, 16+0, 16+2, 16+4, 16+9}, /* IdSel 6, slot ?, ?? */
- {16+1, 16+1, 16+3, 16+8, 16+10}, /* IdSel 7, slot ?, ?? */
- { -1, -1, -1, -1, -1}, /* IdSel 8, SIO */
- {16+6, 16+6, 16+6, 16+6, 16+6}, /* IdSel 9, TULIP */
- };
- const long min_idsel = 5, max_idsel = 9, irqs_per_slot = 5;
- return COMMON_TABLE_LOOKUP;
-}
-
-
-/*
- * The System Vector
- */
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB64P)
-struct alpha_machine_vector eb64p_mv __initmv = {
- .vector_name = "EB64+",
- DO_EV4_MMU,
- DO_DEFAULT_RTC,
- DO_APECS_IO,
- .machine_check = apecs_machine_check,
- .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
- .min_io_address = DEFAULT_IO_BASE,
- .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE,
-
- .nr_irqs = 32,
- .device_interrupt = eb64p_device_interrupt,
-
- .init_arch = apecs_init_arch,
- .init_irq = eb64p_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = common_init_pci,
- .kill_arch = NULL,
- .pci_map_irq = eb64p_map_irq,
- .pci_swizzle = common_swizzle,
-};
-ALIAS_MV(eb64p)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB66)
-struct alpha_machine_vector eb66_mv __initmv = {
- .vector_name = "EB66",
- DO_EV4_MMU,
- DO_DEFAULT_RTC,
- DO_LCA_IO,
- .machine_check = lca_machine_check,
- .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
- .min_io_address = DEFAULT_IO_BASE,
- .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE,
-
- .nr_irqs = 32,
- .device_interrupt = eb64p_device_interrupt,
-
- .init_arch = lca_init_arch,
- .init_irq = eb64p_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = common_init_pci,
- .pci_map_irq = eb64p_map_irq,
- .pci_swizzle = common_swizzle,
-};
-ALIAS_MV(eb66)
-#endif
diff --git a/arch/alpha/kernel/sys_mikasa.c b/arch/alpha/kernel/sys_mikasa.c
index 7690dfd57cb6..557802398231 100644
--- a/arch/alpha/kernel/sys_mikasa.c
+++ b/arch/alpha/kernel/sys_mikasa.c
@@ -23,7 +23,6 @@
#include <asm/irq.h>
#include <asm/mmu_context.h>
#include <asm/io.h>
-#include <asm/core_apecs.h>
#include <asm/core_cia.h>
#include <asm/tlbflush.h>
@@ -164,64 +163,9 @@ mikasa_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
}
-#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
-static void
-mikasa_apecs_machine_check(unsigned long vector, unsigned long la_ptr)
-{
-#define MCHK_NO_DEVSEL 0x205U
-#define MCHK_NO_TABT 0x204U
-
- struct el_common *mchk_header;
- unsigned int code;
-
- mchk_header = (struct el_common *)la_ptr;
-
- /* Clear the error before any reporting. */
- mb();
- mb(); /* magic */
- draina();
- apecs_pci_clr_err();
- wrmces(0x7);
- mb();
-
- code = mchk_header->code;
- process_mcheck_info(vector, la_ptr, "MIKASA APECS",
- (mcheck_expected(0)
- && (code == MCHK_NO_DEVSEL
- || code == MCHK_NO_TABT)));
-}
-#endif
-
-
/*
* The System Vector
*/
-
-#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
-struct alpha_machine_vector mikasa_mv __initmv = {
- .vector_name = "Mikasa",
- DO_EV4_MMU,
- DO_DEFAULT_RTC,
- DO_APECS_IO,
- .machine_check = mikasa_apecs_machine_check,
- .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
- .min_io_address = DEFAULT_IO_BASE,
- .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE,
-
- .nr_irqs = 32,
- .device_interrupt = mikasa_device_interrupt,
-
- .init_arch = apecs_init_arch,
- .init_irq = mikasa_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = common_init_pci,
- .pci_map_irq = mikasa_map_irq,
- .pci_swizzle = common_swizzle,
-};
-ALIAS_MV(mikasa)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_PRIMO)
struct alpha_machine_vector mikasa_primo_mv __initmv = {
.vector_name = "Mikasa-Primo",
DO_EV5_MMU,
@@ -244,4 +188,3 @@ struct alpha_machine_vector mikasa_primo_mv __initmv = {
.pci_swizzle = common_swizzle,
};
ALIAS_MV(mikasa_primo)
-#endif
diff --git a/arch/alpha/kernel/sys_noritake.c b/arch/alpha/kernel/sys_noritake.c
index 47f3ce4f719a..eed3f16561c0 100644
--- a/arch/alpha/kernel/sys_noritake.c
+++ b/arch/alpha/kernel/sys_noritake.c
@@ -24,7 +24,6 @@
#include <asm/irq.h>
#include <asm/mmu_context.h>
#include <asm/io.h>
-#include <asm/core_apecs.h>
#include <asm/core_cia.h>
#include <asm/tlbflush.h>
@@ -253,64 +252,6 @@ noritake_swizzle(struct pci_dev *dev, u8 *pinp)
return slot;
}
-#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
-static void
-noritake_apecs_machine_check(unsigned long vector, unsigned long la_ptr)
-{
-#define MCHK_NO_DEVSEL 0x205U
-#define MCHK_NO_TABT 0x204U
-
- struct el_common *mchk_header;
- unsigned int code;
-
- mchk_header = (struct el_common *)la_ptr;
-
- /* Clear the error before any reporting. */
- mb();
- mb(); /* magic */
- draina();
- apecs_pci_clr_err();
- wrmces(0x7);
- mb();
-
- code = mchk_header->code;
- process_mcheck_info(vector, la_ptr, "NORITAKE APECS",
- (mcheck_expected(0)
- && (code == MCHK_NO_DEVSEL
- || code == MCHK_NO_TABT)));
-}
-#endif
-
-
-/*
- * The System Vectors
- */
-
-#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
-struct alpha_machine_vector noritake_mv __initmv = {
- .vector_name = "Noritake",
- DO_EV4_MMU,
- DO_DEFAULT_RTC,
- DO_APECS_IO,
- .machine_check = noritake_apecs_machine_check,
- .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
- .min_io_address = EISA_DEFAULT_IO_BASE,
- .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE,
-
- .nr_irqs = 48,
- .device_interrupt = noritake_device_interrupt,
-
- .init_arch = apecs_init_arch,
- .init_irq = noritake_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = common_init_pci,
- .pci_map_irq = noritake_map_irq,
- .pci_swizzle = noritake_swizzle,
-};
-ALIAS_MV(noritake)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_PRIMO)
struct alpha_machine_vector noritake_primo_mv __initmv = {
.vector_name = "Noritake-Primo",
DO_EV5_MMU,
@@ -333,4 +274,3 @@ struct alpha_machine_vector noritake_primo_mv __initmv = {
.pci_swizzle = noritake_swizzle,
};
ALIAS_MV(noritake_primo)
-#endif
diff --git a/arch/alpha/kernel/sys_sio.c b/arch/alpha/kernel/sys_sio.c
deleted file mode 100644
index c28a6ae1d989..000000000000
--- a/arch/alpha/kernel/sys_sio.c
+++ /dev/null
@@ -1,486 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/alpha/kernel/sys_sio.c
- *
- * Copyright (C) 1995 David A Rusling
- * Copyright (C) 1996 Jay A Estabrook
- * Copyright (C) 1998, 1999 Richard Henderson
- *
- * Code for all boards that route the PCI interrupts through the SIO
- * PCI/ISA bridge. This includes Noname (AXPpci33), Multia (UDB),
- * Kenetics's Platform 2000, Avanti (AlphaStation), XL, and AlphaBook1.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/screen_info.h>
-
-#include <asm/compiler.h>
-#include <asm/ptrace.h>
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-#include <asm/core_apecs.h>
-#include <asm/core_lca.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-#include "pc873xx.h"
-
-#if defined(ALPHA_RESTORE_SRM_SETUP)
-/* Save LCA configuration data as the console had it set up. */
-struct
-{
- unsigned int orig_route_tab; /* for SAVE/RESTORE */
-} saved_config __attribute((common));
-#endif
-
-
-static void __init
-sio_init_irq(void)
-{
- if (alpha_using_srm)
- alpha_mv.device_interrupt = srm_device_interrupt;
-
- init_i8259a_irqs();
- common_init_isa_dma();
-}
-
-static inline void __init
-alphabook1_init_arch(void)
-{
-#ifdef CONFIG_VGA_CONSOLE
- /* The AlphaBook1 has LCD video fixed at 800x600,
- 37 rows and 100 cols. */
- vgacon_screen_info.orig_y = 37;
- vgacon_screen_info.orig_video_cols = 100;
- vgacon_screen_info.orig_video_lines = 37;
-#endif
-
- lca_init_arch();
-}
-
-
-/*
- * sio_route_tab selects irq routing in PCI/ISA bridge so that:
- * PIRQ0 -> irq 15
- * PIRQ1 -> irq 9
- * PIRQ2 -> irq 10
- * PIRQ3 -> irq 11
- *
- * This probably ought to be configurable via MILO. For
- * example, sound boards seem to like using IRQ 9.
- *
- * This is NOT how we should do it. PIRQ0-X should have
- * their own IRQs, the way intel uses the IO-APIC IRQs.
- */
-
-static void __init
-sio_pci_route(void)
-{
- unsigned int orig_route_tab;
-
- /* First, ALWAYS read and print the original setting. */
- pci_bus_read_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60,
- &orig_route_tab);
- printk("%s: PIRQ original 0x%x new 0x%x\n", __func__,
- orig_route_tab, alpha_mv.sys.sio.route_tab);
-
-#if defined(ALPHA_RESTORE_SRM_SETUP)
- saved_config.orig_route_tab = orig_route_tab;
-#endif
-
- /* Now override with desired setting. */
- pci_bus_write_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60,
- alpha_mv.sys.sio.route_tab);
-}
-
-static bool sio_pci_dev_irq_needs_level(const struct pci_dev *dev)
-{
- if ((dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) &&
- (dev->class >> 8 != PCI_CLASS_BRIDGE_PCMCIA))
- return false;
-
- return true;
-}
-
-static unsigned int __init
-sio_collect_irq_levels(void)
-{
- unsigned int level_bits = 0;
- struct pci_dev *dev = NULL;
-
- /* Iterate through the devices, collecting IRQ levels. */
- for_each_pci_dev(dev) {
- if (!sio_pci_dev_irq_needs_level(dev))
- continue;
-
- if (dev->irq)
- level_bits |= (1 << dev->irq);
- }
- return level_bits;
-}
-
-static void __sio_fixup_irq_levels(unsigned int level_bits, bool reset)
-{
- unsigned int old_level_bits;
-
- /*
- * Now, make all PCI interrupts level sensitive. Notice:
- * these registers must be accessed byte-wise. inw()/outw()
- * don't work.
- *
- * Make sure to turn off any level bits set for IRQs 9,10,11,15,
- * so that the only bits getting set are for devices actually found.
- * Note that we do preserve the remainder of the bits, which we hope
- * will be set correctly by ARC/SRM.
- *
- * Note: we at least preserve any level-set bits on AlphaBook1
- */
- old_level_bits = inb(0x4d0) | (inb(0x4d1) << 8);
-
- if (reset)
- old_level_bits &= 0x71ff;
-
- level_bits |= old_level_bits;
-
- outb((level_bits >> 0) & 0xff, 0x4d0);
- outb((level_bits >> 8) & 0xff, 0x4d1);
-}
-
-static inline void
-sio_fixup_irq_levels(unsigned int level_bits)
-{
- __sio_fixup_irq_levels(level_bits, true);
-}
-
-static inline int
-noname_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- /*
- * The Noname board has 5 PCI slots with each of the 4
- * interrupt pins routed to different pins on the PCI/ISA
- * bridge (PIRQ0-PIRQ3). The table below is based on
- * information available at:
- *
- * http://ftp.digital.com/pub/DEC/axppci/ref_interrupts.txt
- *
- * I have no information on the Avanti interrupt routing, but
- * the routing seems to be identical to the Noname except
- * that the Avanti has an additional slot whose routing I'm
- * unsure of.
- *
- * pirq_tab[0] is a fake entry to deal with old PCI boards
- * that have the interrupt pin number hardwired to 0 (meaning
- * that they use the default INTA line, if they are interrupt
- * driven at all).
- */
- static char irq_tab[][5] = {
- /*INT A B C D */
- { 3, 3, 3, 3, 3}, /* idsel 6 (53c810) */
- {-1, -1, -1, -1, -1}, /* idsel 7 (SIO: PCI/ISA bridge) */
- { 2, 2, -1, -1, -1}, /* idsel 8 (Hack: slot closest ISA) */
- {-1, -1, -1, -1, -1}, /* idsel 9 (unused) */
- {-1, -1, -1, -1, -1}, /* idsel 10 (unused) */
- { 0, 0, 2, 1, 0}, /* idsel 11 KN25_PCI_SLOT0 */
- { 1, 1, 0, 2, 1}, /* idsel 12 KN25_PCI_SLOT1 */
- { 2, 2, 1, 0, 2}, /* idsel 13 KN25_PCI_SLOT2 */
- { 0, 0, 0, 0, 0}, /* idsel 14 AS255 TULIP */
- };
- const long min_idsel = 6, max_idsel = 14, irqs_per_slot = 5;
- int irq = COMMON_TABLE_LOOKUP, tmp;
- tmp = __kernel_extbl(alpha_mv.sys.sio.route_tab, irq);
-
- irq = irq >= 0 ? tmp : -1;
-
- /* Fixup IRQ level if an actual IRQ mapping is detected */
- if (sio_pci_dev_irq_needs_level(dev) && irq >= 0)
- __sio_fixup_irq_levels(1 << irq, false);
-
- return irq;
-}
-
-static inline int
-p2k_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- static char irq_tab[][5] = {
- /*INT A B C D */
- { 0, 0, -1, -1, -1}, /* idsel 6 (53c810) */
- {-1, -1, -1, -1, -1}, /* idsel 7 (SIO: PCI/ISA bridge) */
- { 1, 1, 2, 3, 0}, /* idsel 8 (slot A) */
- { 2, 2, 3, 0, 1}, /* idsel 9 (slot B) */
- {-1, -1, -1, -1, -1}, /* idsel 10 (unused) */
- {-1, -1, -1, -1, -1}, /* idsel 11 (unused) */
- { 3, 3, -1, -1, -1}, /* idsel 12 (CMD0646) */
- };
- const long min_idsel = 6, max_idsel = 12, irqs_per_slot = 5;
- int irq = COMMON_TABLE_LOOKUP, tmp;
- tmp = __kernel_extbl(alpha_mv.sys.sio.route_tab, irq);
- return irq >= 0 ? tmp : -1;
-}
-
-static inline void __init
-noname_init_pci(void)
-{
- common_init_pci();
- sio_pci_route();
- sio_fixup_irq_levels(sio_collect_irq_levels());
-
- if (pc873xx_probe() == -1) {
- printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n");
- } else {
- printk(KERN_INFO "Found %s Super IO chip at 0x%x\n",
- pc873xx_get_model(), pc873xx_get_base());
-
- /* Enabling things in the Super IO chip doesn't actually
- * configure and enable things, the legacy drivers still
- * need to do the actual configuration and enabling.
- * This only unblocks them.
- */
-
-#if !defined(CONFIG_ALPHA_AVANTI)
- /* Don't bother on the Avanti family.
- * None of them had on-board IDE.
- */
- pc873xx_enable_ide();
-#endif
- pc873xx_enable_epp19();
- }
-}
-
-static inline void __init
-alphabook1_init_pci(void)
-{
- struct pci_dev *dev;
- unsigned char orig, config;
-
- common_init_pci();
- sio_pci_route();
-
- /*
- * On the AlphaBook1, the PCMCIA chip (Cirrus 6729)
- * is sensitive to PCI bus bursts, so we must DISABLE
- * burst mode for the NCR 8xx SCSI... :-(
- *
- * Note that the NCR810 SCSI driver must preserve the
- * setting of the bit in order for this to work. At the
- * moment (2.0.29), ncr53c8xx.c does NOT do this, but
- * 53c7,8xx.c DOES.
- */
-
- dev = NULL;
- while ((dev = pci_get_device(PCI_VENDOR_ID_NCR, PCI_ANY_ID, dev))) {
- if (dev->device == PCI_DEVICE_ID_NCR_53C810
- || dev->device == PCI_DEVICE_ID_NCR_53C815
- || dev->device == PCI_DEVICE_ID_NCR_53C820
- || dev->device == PCI_DEVICE_ID_NCR_53C825) {
- unsigned long io_port;
- unsigned char ctest4;
-
- io_port = dev->resource[0].start;
- ctest4 = inb(io_port+0x21);
- if (!(ctest4 & 0x80)) {
- printk("AlphaBook1 NCR init: setting"
- " burst disable\n");
- outb(ctest4 | 0x80, io_port+0x21);
- }
- }
- }
-
- /* Do not set *ANY* level triggers for AlphaBook1. */
- sio_fixup_irq_levels(0);
-
- /* Make sure that register PR1 indicates 1Mb mem */
- outb(0x0f, 0x3ce); orig = inb(0x3cf); /* read PR5 */
- outb(0x0f, 0x3ce); outb(0x05, 0x3cf); /* unlock PR0-4 */
- outb(0x0b, 0x3ce); config = inb(0x3cf); /* read PR1 */
- if ((config & 0xc0) != 0xc0) {
- printk("AlphaBook1 VGA init: setting 1Mb memory\n");
- config |= 0xc0;
- outb(0x0b, 0x3ce); outb(config, 0x3cf); /* write PR1 */
- }
- outb(0x0f, 0x3ce); outb(orig, 0x3cf); /* (re)lock PR0-4 */
-}
-
-static void
-sio_kill_arch(int mode)
-{
-#if defined(ALPHA_RESTORE_SRM_SETUP)
- /* Since we cannot read the PCI DMA Window CSRs, we
- * cannot restore them here.
- *
- * However, we CAN read the PIRQ route register, so restore it
- * now...
- */
- pci_bus_write_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60,
- saved_config.orig_route_tab);
-#endif
-}
-
-
-/*
- * The System Vectors
- */
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_BOOK1)
-struct alpha_machine_vector alphabook1_mv __initmv = {
- .vector_name = "AlphaBook1",
- DO_EV4_MMU,
- DO_DEFAULT_RTC,
- DO_LCA_IO,
- .machine_check = lca_machine_check,
- .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
- .min_io_address = DEFAULT_IO_BASE,
- .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE,
-
- .nr_irqs = 16,
- .device_interrupt = isa_device_interrupt,
-
- .init_arch = alphabook1_init_arch,
- .init_irq = sio_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = alphabook1_init_pci,
- .kill_arch = sio_kill_arch,
- .pci_map_irq = noname_map_irq,
- .pci_swizzle = common_swizzle,
-
- .sys = { .sio = {
- /* NCR810 SCSI is 14, PCMCIA controller is 15. */
- .route_tab = 0x0e0f0a0a,
- }}
-};
-ALIAS_MV(alphabook1)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_AVANTI_CH)
-struct alpha_machine_vector avanti_mv __initmv = {
- .vector_name = "Avanti",
- DO_EV4_MMU,
- DO_DEFAULT_RTC,
- DO_APECS_IO,
- .machine_check = apecs_machine_check,
- .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
- .min_io_address = DEFAULT_IO_BASE,
- .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE,
-
- .nr_irqs = 16,
- .device_interrupt = isa_device_interrupt,
-
- .init_arch = apecs_init_arch,
- .init_irq = sio_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = noname_init_pci,
- .kill_arch = sio_kill_arch,
- .pci_map_irq = noname_map_irq,
- .pci_swizzle = common_swizzle,
-
- .sys = { .sio = {
- .route_tab = 0x0b0a050f, /* leave 14 for IDE, 9 for SND */
- }}
-};
-ALIAS_MV(avanti)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_NONAME_CH)
-struct alpha_machine_vector noname_mv __initmv = {
- .vector_name = "Noname",
- DO_EV4_MMU,
- DO_DEFAULT_RTC,
- DO_LCA_IO,
- .machine_check = lca_machine_check,
- .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
- .min_io_address = DEFAULT_IO_BASE,
- .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE,
-
- .nr_irqs = 16,
- .device_interrupt = srm_device_interrupt,
-
- .init_arch = lca_init_arch,
- .init_irq = sio_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = noname_init_pci,
- .kill_arch = sio_kill_arch,
- .pci_map_irq = noname_map_irq,
- .pci_swizzle = common_swizzle,
-
- .sys = { .sio = {
- /* For UDB, the only available PCI slot must not map to IRQ 9,
- since that's the builtin MSS sound chip. That PCI slot
- will map to PIRQ1 (for INTA at least), so we give it IRQ 15
- instead.
-
- Unfortunately we have to do this for NONAME as well, since
- they are co-indicated when the platform type "Noname" is
- selected... :-( */
-
- .route_tab = 0x0b0a0f0d,
- }}
-};
-ALIAS_MV(noname)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_P2K)
-struct alpha_machine_vector p2k_mv __initmv = {
- .vector_name = "Platform2000",
- DO_EV4_MMU,
- DO_DEFAULT_RTC,
- DO_LCA_IO,
- .machine_check = lca_machine_check,
- .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
- .min_io_address = DEFAULT_IO_BASE,
- .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE,
-
- .nr_irqs = 16,
- .device_interrupt = srm_device_interrupt,
-
- .init_arch = lca_init_arch,
- .init_irq = sio_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = noname_init_pci,
- .kill_arch = sio_kill_arch,
- .pci_map_irq = p2k_map_irq,
- .pci_swizzle = common_swizzle,
-
- .sys = { .sio = {
- .route_tab = 0x0b0a090f,
- }}
-};
-ALIAS_MV(p2k)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_XL)
-struct alpha_machine_vector xl_mv __initmv = {
- .vector_name = "XL",
- DO_EV4_MMU,
- DO_DEFAULT_RTC,
- DO_APECS_IO,
- .machine_check = apecs_machine_check,
- .max_isa_dma_address = ALPHA_XL_MAX_ISA_DMA_ADDRESS,
- .min_io_address = DEFAULT_IO_BASE,
- .min_mem_address = XL_DEFAULT_MEM_BASE,
-
- .nr_irqs = 16,
- .device_interrupt = isa_device_interrupt,
-
- .init_arch = apecs_init_arch,
- .init_irq = sio_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = noname_init_pci,
- .kill_arch = sio_kill_arch,
- .pci_map_irq = noname_map_irq,
- .pci_swizzle = common_swizzle,
-
- .sys = { .sio = {
- .route_tab = 0x0b0a090f,
- }}
-};
-ALIAS_MV(xl)
-#endif
--
2.39.2
Powered by blists - more mailing lists