[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240503181333.2336999-10-eahariha@linux.microsoft.com>
Date: Fri, 3 May 2024 18:13:30 +0000
From: Easwar Hariharan <eahariha@...ux.microsoft.com>
To: Mauro Carvalho Chehab <mchehab@...nel.org>,
Mariusz Bialonczyk <manio@...boo.net>,
Hans Verkuil <hverkuil-cisco@...all.nl>,
Easwar Hariharan <eahariha@...ux.microsoft.com>,
linux-media@...r.kernel.org (open list:MEDIA INPUT INFRASTRUCTURE (V4L/DVB)),
linux-kernel@...r.kernel.org (open list)
Cc: Wolfram Sang <wsa+renesas@...g-engineering.com>,
amd-gfx@...ts.freedesktop.org (open list:RADEON and AMDGPU DRM DRIVERS),
dri-devel@...ts.freedesktop.org (open list:DRM DRIVERS),
linux-kernel@...r.kernel.org (open list),
intel-gfx@...ts.freedesktop.org (open list:INTEL DRM DISPLAY FOR XE AND I915 DRIVERS),
intel-xe@...ts.freedesktop.org (open list:INTEL DRM DISPLAY FOR XE AND I915 DRIVERS),
nouveau@...ts.freedesktop.org (open list:DRM DRIVER FOR NVIDIA GEFORCE/QUADRO GPUS),
linux-i2c@...r.kernel.org (open list:I2C SUBSYSTEM HOST DRIVERS),
linux-media@...r.kernel.org (open list:BTTV VIDEO4LINUX DRIVER),
linux-fbdev@...r.kernel.org (open list:FRAMEBUFFER LAYER)
Subject: [PATCH v2 09/12] media: cx23885: Make I2C terminology more inclusive
I2C v7, SMBus 3.2, and I3C 1.1.1 specifications have replaced "master/slave"
with more appropriate terms. Inspired by and following on to Wolfram's
series to fix drivers/i2c/[1], fix the terminology for users of
I2C_ALGOBIT bitbanging interface, now that the approved verbiage exists
in the specification.
Compile tested, no functionality changes intended
[1]: https://lore.kernel.org/all/20240322132619.6389-1-wsa+renesas@sang-engineering.com/
Signed-off-by: Easwar Hariharan <eahariha@...ux.microsoft.com>
---
drivers/media/pci/cx23885/cx23885-core.c | 6 +++---
drivers/media/pci/cx23885/cx23885-f300.c | 8 ++++----
drivers/media/pci/cx23885/cx23885-i2c.c | 6 +++---
drivers/media/pci/cx23885/cx23885.h | 2 +-
4 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/media/pci/cx23885/cx23885-core.c b/drivers/media/pci/cx23885/cx23885-core.c
index c8705d786cdd..0adbdf529cec 100644
--- a/drivers/media/pci/cx23885/cx23885-core.c
+++ b/drivers/media/pci/cx23885/cx23885-core.c
@@ -942,7 +942,7 @@ static int cx23885_dev_setup(struct cx23885_dev *dev)
dev->pci_slot = PCI_SLOT(dev->pci->devfn);
cx23885_irq_add(dev, 0x001f00);
- /* External Master 1 Bus */
+ /* External Controller 1 Bus */
dev->i2c_bus[0].nr = 0;
dev->i2c_bus[0].dev = dev;
dev->i2c_bus[0].reg_stat = I2C1_STAT;
@@ -952,7 +952,7 @@ static int cx23885_dev_setup(struct cx23885_dev *dev)
dev->i2c_bus[0].reg_wdata = I2C1_WDATA;
dev->i2c_bus[0].i2c_period = (0x9d << 24); /* 100kHz */
- /* External Master 2 Bus */
+ /* External Controller 2 Bus */
dev->i2c_bus[1].nr = 1;
dev->i2c_bus[1].dev = dev;
dev->i2c_bus[1].reg_stat = I2C2_STAT;
@@ -962,7 +962,7 @@ static int cx23885_dev_setup(struct cx23885_dev *dev)
dev->i2c_bus[1].reg_wdata = I2C2_WDATA;
dev->i2c_bus[1].i2c_period = (0x9d << 24); /* 100kHz */
- /* Internal Master 3 Bus */
+ /* Internal Controller 3 Bus */
dev->i2c_bus[2].nr = 2;
dev->i2c_bus[2].dev = dev;
dev->i2c_bus[2].reg_stat = I2C3_STAT;
diff --git a/drivers/media/pci/cx23885/cx23885-f300.c b/drivers/media/pci/cx23885/cx23885-f300.c
index ac1c434e8e24..2ef7454e0f61 100644
--- a/drivers/media/pci/cx23885/cx23885-f300.c
+++ b/drivers/media/pci/cx23885/cx23885-f300.c
@@ -92,7 +92,7 @@ static u8 f300_xfer(struct dvb_frontend *fe, u8 *buf)
f300_set_line(dev, F300_RESET, 0);/* begin to send data */
msleep(1);
- f300_send_byte(dev, 0xe0);/* the slave address is 0xe0, write */
+ f300_send_byte(dev, 0xe0);/* the target address is 0xe0, write */
msleep(1);
temp = buf[0];
@@ -112,10 +112,10 @@ static u8 f300_xfer(struct dvb_frontend *fe, u8 *buf)
}
if (i > 7) {
- pr_err("%s: timeout, the slave no response\n",
+ pr_err("%s: timeout, the target no response\n",
__func__);
- ret = 1; /* timeout, the slave no response */
- } else { /* the slave not busy, prepare for getting data */
+ ret = 1; /* timeout, the target no response */
+ } else { /* the target not busy, prepare for getting data */
f300_set_line(dev, F300_RESET, 0);/*ready...*/
msleep(1);
f300_send_byte(dev, 0xe1);/* 0xe1 is Read */
diff --git a/drivers/media/pci/cx23885/cx23885-i2c.c b/drivers/media/pci/cx23885/cx23885-i2c.c
index f51fad33dc04..ddafeccb2b0a 100644
--- a/drivers/media/pci/cx23885/cx23885-i2c.c
+++ b/drivers/media/pci/cx23885/cx23885-i2c.c
@@ -34,7 +34,7 @@ MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time");
#define I2C_EXTEND (1 << 3)
#define I2C_NOSTOP (1 << 4)
-static inline int i2c_slave_did_ack(struct i2c_adapter *i2c_adap)
+static inline int i2c_target_did_ack(struct i2c_adapter *i2c_adap)
{
struct cx23885_i2c *bus = i2c_adap->algo_data;
struct cx23885_dev *dev = bus->dev;
@@ -84,7 +84,7 @@ static int i2c_sendbytes(struct i2c_adapter *i2c_adap,
cx_write(bus->reg_ctrl, bus->i2c_period | (1 << 2));
if (!i2c_wait_done(i2c_adap))
return -EIO;
- if (!i2c_slave_did_ack(i2c_adap))
+ if (!i2c_target_did_ack(i2c_adap))
return -ENXIO;
dprintk(1, "%s() returns 0\n", __func__);
@@ -163,7 +163,7 @@ static int i2c_readbytes(struct i2c_adapter *i2c_adap,
cx_write(bus->reg_ctrl, bus->i2c_period | (1 << 2) | 1);
if (!i2c_wait_done(i2c_adap))
return -EIO;
- if (!i2c_slave_did_ack(i2c_adap))
+ if (!i2c_target_did_ack(i2c_adap))
return -ENXIO;
diff --git a/drivers/media/pci/cx23885/cx23885.h b/drivers/media/pci/cx23885/cx23885.h
index 349462ee2c48..c2d7a95933d5 100644
--- a/drivers/media/pci/cx23885/cx23885.h
+++ b/drivers/media/pci/cx23885/cx23885.h
@@ -368,7 +368,7 @@ struct cx23885_dev {
* AV core so we see nice clean and stable video and audio. */
u32 clk_freq;
- /* I2C adapters: Master 1 & 2 (External) & Master 3 (Internal only) */
+ /* I2C adapters: Controller 1 & 2 (External) & Controller 3 (Internal only) */
struct cx23885_i2c i2c_bus[3];
int nr;
--
2.34.1
Powered by blists - more mailing lists