linux-kernel - Re: [PATCH 2/4] PCI: pciehp: bail out if pci_hp_add

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240504105630.DPSzrgHe@linutronix.de>
Date: Sat, 4 May 2024 12:56:30 +0200
From: Nam Cao <namcao@...utronix.de>
To: Lukas Wunner <lukas@...ner.de>
Cc: Bjorn Helgaas <bhelgaas@...gle.com>, Yinghai Lu <yinghai@...nel.org>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	Rajesh Shah <rajesh.shah@...el.com>, linux-pci@...r.kernel.org,
	linux-kernel@...r.kernel.org, stable@...r.kernel.org
Subject: Re: [PATCH 2/4] PCI: pciehp: bail out if pci_hp_add_bridge() fails

On Sat, May 04, 2024 at 11:51:54AM +0200, Lukas Wunner wrote:
> On Sat, May 04, 2024 at 11:35:29AM +0200, Nam Cao wrote:
> > pci_stop_and_remove_bus_device() is not necessary to prevent kernel
> > crashing. But without this, we cannot hot-plug any other devices to this
> > slot afterward, despite the bridge has already been removed. Below is what
> > happens without pci_stop_and_remove_bus_device().
> > 
> > First, we hotplug a bridge. That fails, so QEMU removes this bridge:
> > (qemu) device_add pci-bridge,id=br2,bus=br1,chassis_nr=19,addr=1
> > [    9.289609] shpchp 0000:01:00.0: Latch close on Slot(1-1)
> > [    9.291145] shpchp 0000:01:00.0: Button pressed on Slot(1-1)
> > [    9.292705] shpchp 0000:01:00.0: Card present on Slot(1-1)
> > [    9.294369] shpchp 0000:01:00.0: PCI slot #1-1 - powering on due to button press
> > [   15.529997] pci 0000:02:01.0: [1b36:0001] type 01 class 0x060400 conventional PCI bridge
> > [   15.533907] pci 0000:02:01.0: BAR 0 [mem 0x00000000-0x000000ff 64bit]
> > [   15.535802] pci 0000:02:01.0: PCI bridge to [bus 00]
> > [   15.538519] pci 0000:02:01.0:   bridge window [io  0x0000-0x0fff]
> > [   15.540261] pci 0000:02:01.0:   bridge window [mem 0x00000000-0x000fffff]
> > [   15.543486] pci 0000:02:01.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
> > [   15.547151] pci 0000:02:01.0: No bus number available for hot-added bridge
> > [   15.549067] shpchp 0000:01:00.0: Cannot add device at 0000:02:01
> > [   15.553104] shpchp 0000:01:00.0: Latch open on Slot(1-1)
> > [   15.555246] shpchp 0000:01:00.0: Card not present on Slot(1-1)
> 
> I'm not familiar with shpchp, I don't understand why it's thinking
> that there's no card after it failed to find a bus number.

Sorry, I got mixed up between the two.
 
> Could you reproduce with pciehp instead of shpchp please?

Same thing for pciehp below. I think the problem is because without 
pci_stop_and_remove_bus_device(), no one cleans up the device added in
pci_scan_slot(). When another device get hot-added, pci_get_slot() wrongly
thinks another device is already there, so the hot-plug fails.

Best regards,
Nam

(qemu) device_add pcie-pci-bridge,id=br1,bus=rp1
[   19.840550] pcieport 0000:00:03.0: pciehp: pending interrupts 0x0009 from Slot Status
[   19.842843] pcieport 0000:00:03.0: pciehp: Slot(1): Button press: will power on in 5 sec
[   19.845289] pcieport 0000:00:03.0: pciehp: pending interrupts 0x0010 from Slot Status
[   19.847502] pcieport 0000:00:03.0: pciehp: pciehp_set_indicators: SLOTCTRL 6c write cmd 2c0
[   19.849876] pcieport 0000:00:03.0: pciehp: pciehp_check_link_active: lnk_status = 2011
[   19.852094] pcieport 0000:00:03.0: pciehp: Slot(1): Card present
[   19.853809] pcieport 0000:00:03.0: pciehp: Slot(1): Link Up
[   19.855412] pcieport 0000:00:03.0: pciehp: pciehp_get_power_status: SLOTCTRL 6c value read 6f1
[   19.857975] pcieport 0000:00:03.0: pciehp: pending interrupts 0x0010 from Slot Status
[   19.860199] pcieport 0000:00:03.0: pciehp: pciehp_power_on_slot: SLOTCTRL 6c write cmd 0
[   19.862586] pcieport 0000:00:03.0: pciehp: pending interrupts 0x0010 from Slot Status
[   19.864806] pcieport 0000:00:03.0: pciehp: pciehp_set_indicators: SLOTCTRL 6c write cmd 200
[   20.994936] pcieport 0000:00:03.0: pciehp: pciehp_check_link_status: lnk_status = 2011
[   20.997463] pci 0000:01:00.0: [1b36:000e] type 01 class 0x060400 PCIe to PCI/PCI-X bridge
[   21.001131] pci 0000:01:00.0: BAR 0 [mem 0x00000000-0x000000ff 64bit]
[   21.003071] pci 0000:01:00.0: PCI bridge to [bus 00]
[   21.005417] pci 0000:01:00.0:   bridge window [io  0x0000-0x0fff]
[   21.007181] pci 0000:01:00.0:   bridge window [mem 0x00000000-0x000fffff]
[   21.010084] pci 0000:01:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[   21.014162] pci 0000:01:00.0: vgaarb: pci_notify
[   21.015900] pci 0000:01:00.0: No bus number available for hot-added bridge
[   21.017865] pcieport 0000:00:03.0: pciehp: Cannot add device at 0000:01:00
[   21.019931] pcieport 0000:00:03.0: pciehp: pending interrupts 0x0010 from Slot Status
[   21.022178] pcieport 0000:00:03.0: pciehp: pciehp_power_off_slot: SLOTCTRL 6c write cmd 400
[   22.084607] pcieport 0000:00:03.0: pciehp: pending interrupts 0x0018 from Slot Status
[   22.086845] pcieport 0000:00:03.0: pciehp: pciehp_set_indicators: SLOTCTRL 6c write cmd 340
[   22.089323] pcieport 0000:00:03.0: pciehp: pending interrupts 0x0010 from Slot Status
[   22.091539] pcieport 0000:00:03.0: pciehp: pciehp_set_indicators: SLOTCTRL 6c write cmd 300
[   22.093913] pcieport 0000:00:03.0: pciehp: pciehp_check_link_active: lnk_status = 11

(qemu) device_add e1000,bus=rp1,id=eth1
[   58.389527] pcieport 0000:00:03.0: pciehp: pending interrupts 0x0009 from Slot Status
[   58.391789] pcieport 0000:00:03.0: pciehp: Slot(1): Button press: will power on in 5 sec
[   58.394175] pcieport 0000:00:03.0: pciehp: pending interrupts 0x0010 from Slot Status
[   58.396365] pcieport 0000:00:03.0: pciehp: pciehp_set_indicators: SLOTCTRL 6c write cmd 2c0
[   58.398681] pcieport 0000:00:03.0: pciehp: pciehp_check_link_active: lnk_status = 2011
[   58.400871] pcieport 0000:00:03.0: pciehp: Slot(1): Card present
[   58.402542] pcieport 0000:00:03.0: pciehp: Slot(1): Link Up
[   58.404154] pcieport 0000:00:03.0: pciehp: pciehp_get_power_status: SLOTCTRL 6c value read 6f1
[   58.406627] pcieport 0000:00:03.0: pciehp: pending interrupts 0x0010 from Slot Status
[   58.408798] pcieport 0000:00:03.0: pciehp: pciehp_power_on_slot: SLOTCTRL 6c write cmd 0
[   58.411213] pcieport 0000:00:03.0: pciehp: pending interrupts 0x0010 from Slot Status
[   58.413386] pcieport 0000:00:03.0: pciehp: pciehp_set_indicators: SLOTCTRL 6c write cmd 200
[   59.523011] pcieport 0000:00:03.0: pciehp: pciehp_check_link_status: lnk_status = 2011
[   59.525256] pcieport 0000:00:03.0: pciehp: Device 0000:01:00.0 already exists at 0000:01:00, skipping hot-add
[   59.528139] pcieport 0000:00:03.0: pciehp: pending interrupts 0x0010 from Slot Status
[   59.530325] pcieport 0000:00:03.0: pciehp: pciehp_set_indicators: SLOTCTRL 6c write cmd 1c0