[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZjYjAjPlM5ClOGa4@matsya>
Date: Sat, 4 May 2024 17:28:58 +0530
From: Vinod Koul <vkoul@...nel.org>
To: Sean Anderson <sean.anderson@...ux.dev>
Cc: Laurent Pinchart <laurent.pinchart@...asonboard.com>,
linux-phy@...ts.infradead.org, linux-kernel@...r.kernel.org,
Michal Simek <michal.simek@....com>,
linux-arm-kernel@...ts.infradead.org,
Kishon Vijay Abraham I <kishon@...nel.org>
Subject: Re: [PATCH 3/3] phy: zynqmp: Add debugfs support
On 22-04-24, 14:58, Sean Anderson wrote:
> Add support for printing some basic status information to debugfs. This
> is helpful when debugging phy consumers to make sure they are configuring
> the phy appropriately.
>
> Signed-off-by: Sean Anderson <sean.anderson@...ux.dev>
> ---
>
> drivers/phy/xilinx/phy-zynqmp.c | 54 +++++++++++++++++++++++++++++++++
> 1 file changed, 54 insertions(+)
>
> diff --git a/drivers/phy/xilinx/phy-zynqmp.c b/drivers/phy/xilinx/phy-zynqmp.c
> index 08c88dcd7799..e2e86943e9f3 100644
> --- a/drivers/phy/xilinx/phy-zynqmp.c
> +++ b/drivers/phy/xilinx/phy-zynqmp.c
> @@ -13,6 +13,7 @@
> */
>
> #include <linux/clk.h>
> +#include <linux/debugfs.h>
> #include <linux/delay.h>
> #include <linux/io.h>
> #include <linux/kernel.h>
> @@ -122,6 +123,15 @@
> #define ICM_PROTOCOL_DP 0x4
> #define ICM_PROTOCOL_SGMII 0x5
>
> +static const char *const xpsgtr_icm_str[] = {
> + [ICM_PROTOCOL_PD] = "powered down",
> + [ICM_PROTOCOL_PCIE] = "PCIe",
> + [ICM_PROTOCOL_SATA] = "SATA",
> + [ICM_PROTOCOL_USB] = "USB",
> + [ICM_PROTOCOL_DP] = "DisplayPort",
> + [ICM_PROTOCOL_SGMII] = "SGMII",
> +};
> +
> /* Test Mode common reset control parameters */
> #define TM_CMN_RST 0x10018
> #define TM_CMN_RST_EN 0x1
> @@ -768,6 +778,48 @@ static struct phy *xpsgtr_xlate(struct device *dev,
> return ERR_PTR(-EINVAL);
> }
>
> +/*
> + * DebugFS
> + */
> +
> +static int xpsgtr_status_read(struct seq_file *seq, void *data)
> +{
> + struct xpsgtr_phy *gtr_phy = seq->private;
> + struct clk *clk;
> + u32 pll_status;
> +
> + mutex_lock(>r_phy->phy->mutex);
> + pll_status = xpsgtr_read_phy(gtr_phy, L0_PLL_STATUS_READ_1);
> + clk = gtr_phy->dev->clk[gtr_phy->refclk];
> +
> + seq_printf(seq, "Lane: %u\n", gtr_phy->lane);
> + seq_printf(seq, "Protocol: %s\n",
> + xpsgtr_icm_str[gtr_phy->protocol]);
> + seq_printf(seq, "Instance: %u\n", gtr_phy->instance);
> + seq_printf(seq, "Reference clock: %u (%pC)\n", gtr_phy->refclk, clk);
> + seq_printf(seq, "Reference rate: %lu\n", clk_get_rate(clk));
> + seq_printf(seq, "PLL locked: %s\n",
> + pll_status & PLL_STATUS_LOCKED ? "yes" : "no");
> +
> + mutex_unlock(>r_phy->phy->mutex);
> + return 0;
> +}
> +
> +static int xpsgtr_status_open(struct inode *inode, struct file *f)
> +{
> + struct xpsgtr_phy *gtr_phy = inode->i_private;
> +
> + return single_open(f, xpsgtr_status_read, gtr_phy);
> +}
> +
> +static const struct file_operations xpsgtr_status_ops = {
> + .owner = THIS_MODULE,
> + .open = xpsgtr_status_open,
> + .release = single_release,
> + .read = seq_read,
> + .llseek = seq_lseek
> +};
There are debugfs simple helpers which should help you avoid all this
open coding and just have the read call
> +
> /*
> * Power Management
> */
> @@ -917,6 +969,8 @@ static int xpsgtr_probe(struct platform_device *pdev)
>
> gtr_phy->phy = phy;
> phy_set_drvdata(phy, gtr_phy);
> + debugfs_create_file("status", 0444, phy->debugfs, gtr_phy,
> + &xpsgtr_status_ops);
generic status does not make sense, how about device-name-status
--
~Vinod
Powered by blists - more mailing lists