linux-kernel - Re: [PATCH v3 3/3] net: phy: bcm-phy-lib: Implement BroadR-Reach link modes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <efaf2c2c-45a9-4b22-8f71-c8e41d680912@lunn.ch>
Date: Mon, 6 May 2024 21:35:09 +0200
From: Andrew Lunn <andrew@...n.ch>
To: Kamil Horák - 2N <kamilh@...s.com>
Cc: florian.fainelli@...adcom.com, bcm-kernel-feedback-list@...adcom.com,
	hkallweit1@...il.com, netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 3/3] net: phy: bcm-phy-lib: Implement BroadR-Reach
 link modes

On Mon, May 06, 2024 at 04:40:15PM +0200, Kamil Horák - 2N wrote:
> Implement single-pair BroadR-Reach modes on bcm5481x PHY by Broadcom.
> Create set of functions alternative to IEEE 802.3 to handle configuration
> of these modes on compatible Broadcom PHYs.
> 
> Signed-off-by: Kamil Horák - 2N <kamilh@...s.com>
> ---
>  drivers/net/phy/bcm-phy-lib.c | 122 ++++++++++++
>  drivers/net/phy/bcm-phy-lib.h |   4 +
>  drivers/net/phy/broadcom.c    | 338 ++++++++++++++++++++++++++++++++--
>  3 files changed, 449 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/net/phy/bcm-phy-lib.c b/drivers/net/phy/bcm-phy-lib.c
> index 876f28fd8256..9fa2a20e641f 100644
> --- a/drivers/net/phy/bcm-phy-lib.c
> +++ b/drivers/net/phy/bcm-phy-lib.c
> @@ -794,6 +794,46 @@ static int _bcm_phy_cable_test_get_status(struct phy_device *phydev,
>  	return ret;
>  }
>  
> +static int bcm_setup_forced(struct phy_device *phydev)
> +{
> +	u16 ctl = 0;
> +
> +	phydev->pause = 0;
> +	phydev->asym_pause = 0;
> +
> +	if (phydev->speed == SPEED_100)
> +		ctl |= LRECR_SPEED100;
> +
> +	if (phydev->duplex != DUPLEX_FULL)
> +		return -EOPNOTSUPP;

Is this even possible? I don't actually known, but you don't define a
HALF link mode, so how is this requested?

> +/**
> + * bcm_linkmode_adv_to_mii_adv_t
> + * @advertising: the linkmode advertisement settings
> + *
> + * A small helper function that translates linkmode advertisement
> + * settings to phy autonegotiation advertisements for the
> + * MII_BCM54XX_LREANAA register.
> + */
> +static inline u32 bcm_linkmode_adv_to_mii_adv_t(unsigned long *advertising)

No inline functions in .c files please, let the compiler decide.

> +int bcm_setup_master_slave(struct phy_device *phydev);
> +int bcm_config_aneg(struct phy_device *phydev, bool changed);
> +int bcm_config_advert(struct phy_device *phydev);

These are all BroadReach specific, so i would put something in there
name to indicate this. Otherwise somebody is going to try to use them
when not appropriate.

     Andrew