| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240506-rk-dts-additions-v4-6-271023ddfd40@gmail.com>
Date: Mon, 06 May 2024 13:36:37 +0400
From: Alexey Charkov <alchark@...il.com>
To: Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, Heiko Stuebner <heiko@...ech.de>
Cc: Daniel Lezcano <daniel.lezcano@...aro.org>,
Dragan Simic <dsimic@...jaro.org>, Viresh Kumar <viresh.kumar@...aro.org>,
Chen-Yu Tsai <wens@...nel.org>, Diederik de Haas <didi.debian@...ow.org>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org,
Alexey Charkov <alchark@...il.com>
Subject: [PATCH v4 6/6] arm64: dts: rockchip: Add OPP data for CPU cores on
RK3588
By default the CPUs on RK3588 start up in a conservative performance
mode. Add frequency and voltage mappings to the device tree to enable
dynamic scaling via cpufreq.
OPP values are adapted from Radxa's downstream kernel for Rock 5B [1],
stripping them down to the minimum frequency and voltage combinations
as expected by the generic upstream cpufreq-dt driver, and also dropping
those OPPs that don't differ in voltage but only in frequency (keeping
the top frequency OPP in each case).
Note that this patch ignores voltage scaling for the CPU memory
interface which the downstream kernel does through a custom cpufreq
driver, and which is why the downstream version has two sets of voltage
values for each OPP (the second one being meant for the memory
interface supply regulator). This is done instead via regulator
coupling between CPU and memory interface supplies on affected boards.
This has been tested on Rock 5B with u-boot 2023.11 compiled from
Collabora's integration tree [2] with binary bl31 and appears to be
stable both under active cooling and passive cooling (with throttling)
[1] https://github.com/radxa/kernel/blob/stable-5.10-rock5/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
[2] https://gitlab.collabora.com/hardware-enablement/rockchip-3588/u-boot
Signed-off-by: Alexey Charkov <alchark@...il.com>
---
arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 122 ++++++++++++++++++++++++++++++
1 file changed, 122 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
index 57c2d998ae75..85c25d5efdad 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
@@ -97,6 +97,7 @@ cpu_l0: cpu@0 {
clocks = <&scmi_clk SCMI_CLK_CPUL>;
assigned-clocks = <&scmi_clk SCMI_CLK_CPUL>;
assigned-clock-rates = <816000000>;
+ operating-points-v2 = <&cluster0_opp_table>;
cpu-idle-states = <&CPU_SLEEP>;
i-cache-size = <32768>;
i-cache-line-size = <64>;
@@ -116,6 +117,7 @@ cpu_l1: cpu@100 {
enable-method = "psci";
capacity-dmips-mhz = <530>;
clocks = <&scmi_clk SCMI_CLK_CPUL>;
+ operating-points-v2 = <&cluster0_opp_table>;
cpu-idle-states = <&CPU_SLEEP>;
i-cache-size = <32768>;
i-cache-line-size = <64>;
@@ -135,6 +137,7 @@ cpu_l2: cpu@200 {
enable-method = "psci";
capacity-dmips-mhz = <530>;
clocks = <&scmi_clk SCMI_CLK_CPUL>;
+ operating-points-v2 = <&cluster0_opp_table>;
cpu-idle-states = <&CPU_SLEEP>;
i-cache-size = <32768>;
i-cache-line-size = <64>;
@@ -154,6 +157,7 @@ cpu_l3: cpu@300 {
enable-method = "psci";
capacity-dmips-mhz = <530>;
clocks = <&scmi_clk SCMI_CLK_CPUL>;
+ operating-points-v2 = <&cluster0_opp_table>;
cpu-idle-states = <&CPU_SLEEP>;
i-cache-size = <32768>;
i-cache-line-size = <64>;
@@ -175,6 +179,7 @@ cpu_b0: cpu@400 {
clocks = <&scmi_clk SCMI_CLK_CPUB01>;
assigned-clocks = <&scmi_clk SCMI_CLK_CPUB01>;
assigned-clock-rates = <816000000>;
+ operating-points-v2 = <&cluster1_opp_table>;
cpu-idle-states = <&CPU_SLEEP>;
i-cache-size = <65536>;
i-cache-line-size = <64>;
@@ -194,6 +199,7 @@ cpu_b1: cpu@500 {
enable-method = "psci";
capacity-dmips-mhz = <1024>;
clocks = <&scmi_clk SCMI_CLK_CPUB01>;
+ operating-points-v2 = <&cluster1_opp_table>;
cpu-idle-states = <&CPU_SLEEP>;
i-cache-size = <65536>;
i-cache-line-size = <64>;
@@ -215,6 +221,7 @@ cpu_b2: cpu@600 {
clocks = <&scmi_clk SCMI_CLK_CPUB23>;
assigned-clocks = <&scmi_clk SCMI_CLK_CPUB23>;
assigned-clock-rates = <816000000>;
+ operating-points-v2 = <&cluster2_opp_table>;
cpu-idle-states = <&CPU_SLEEP>;
i-cache-size = <65536>;
i-cache-line-size = <64>;
@@ -234,6 +241,7 @@ cpu_b3: cpu@700 {
enable-method = "psci";
capacity-dmips-mhz = <1024>;
clocks = <&scmi_clk SCMI_CLK_CPUB23>;
+ operating-points-v2 = <&cluster2_opp_table>;
cpu-idle-states = <&CPU_SLEEP>;
i-cache-size = <65536>;
i-cache-line-size = <64>;
@@ -348,6 +356,120 @@ l3_cache: l3-cache {
};
};
+ cluster0_opp_table: opp-table-cluster0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-1008000000 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <675000 675000 950000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <712500 712500 950000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1416000000 {
+ opp-hz = /bits/ 64 <1416000000>;
+ opp-microvolt = <762500 762500 950000>;
+ clock-latency-ns = <40000>;
+ opp-suspend;
+ };
+ opp-1608000000 {
+ opp-hz = /bits/ 64 <1608000000>;
+ opp-microvolt = <850000 850000 950000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1800000000 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <950000 950000 950000>;
+ clock-latency-ns = <40000>;
+ };
+ };
+
+ cluster1_opp_table: opp-table-cluster1 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <675000 675000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1416000000 {
+ opp-hz = /bits/ 64 <1416000000>;
+ opp-microvolt = <725000 725000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1608000000 {
+ opp-hz = /bits/ 64 <1608000000>;
+ opp-microvolt = <762500 762500 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1800000000 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <850000 850000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-2016000000 {
+ opp-hz = /bits/ 64 <2016000000>;
+ opp-microvolt = <925000 925000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-2208000000 {
+ opp-hz = /bits/ 64 <2208000000>;
+ opp-microvolt = <987500 987500 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-2400000000 {
+ opp-hz = /bits/ 64 <2400000000>;
+ opp-microvolt = <1000000 1000000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ };
+
+ cluster2_opp_table: opp-table-cluster2 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <675000 675000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1416000000 {
+ opp-hz = /bits/ 64 <1416000000>;
+ opp-microvolt = <725000 725000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1608000000 {
+ opp-hz = /bits/ 64 <1608000000>;
+ opp-microvolt = <762500 762500 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1800000000 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <850000 850000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-2016000000 {
+ opp-hz = /bits/ 64 <2016000000>;
+ opp-microvolt = <925000 925000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-2208000000 {
+ opp-hz = /bits/ 64 <2208000000>;
+ opp-microvolt = <987500 987500 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-2400000000 {
+ opp-hz = /bits/ 64 <2400000000>;
+ opp-microvolt = <1000000 1000000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ };
+
display_subsystem: display-subsystem {
compatible = "rockchip,display-subsystem";
ports = <&vop_out>;
--
2.45.0
Powered by blists - more mailing lists