[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240506124836.3621528-1-heiko@sntech.de>
Date: Mon, 6 May 2024 14:48:34 +0200
From: Heiko Stuebner <heiko@...ech.de>
To: vkoul@...nel.org,
kishon@...nel.org,
robh@...nel.org,
krzk+dt@...nel.org,
conor+dt@...nel.org
Cc: quentin.schulz@...rry.de,
heiko@...ech.de,
linux-phy@...ts.infradead.org,
devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 0/2] MIPI DSI phy for rk3588
This adds the phy driver need for DSI output on rk3588.
The phy itself is used for both DSI output and CSI input, though the
CSI part for the whole chain needs a lot more work, so is left out for
now and only the DSI part implemented.
This allows the rk3588 with its current VOP support to drive a DSI display
using the DSI2 controller driver I'll submit in a next step.
Only generic phy interfaces are used, so the DSI part is pretty straight
forward.
Heiko Stuebner (2):
dt-bindings: phy: Add Rockchip MIPI CSI/DSI PHY schema
phy: rockchip: Add Samsung CSI/DSI Combo DCPHY driver
.../phy/rockchip,rk3588-mipi-dcphy.yaml | 76 +
drivers/phy/rockchip/Kconfig | 12 +
drivers/phy/rockchip/Makefile | 1 +
.../phy/rockchip/phy-rockchip-samsung-dcphy.c | 1609 +++++++++++++++++
4 files changed, 1698 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/rockchip,rk3588-mipi-dcphy.yaml
create mode 100644 drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c
--
2.39.2
Powered by blists - more mailing lists