| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240506125152.78174-5-mpe@ellerman.id.au>
Date: Mon, 6 May 2024 22:51:49 +1000
From: Michael Ellerman <mpe@...erman.id.au>
To: <linuxppc-dev@...ts.ozlabs.org>
Cc: <linux-kernel@...r.kernel.org>,
<christophe.leroy@...roup.eu>
Subject: [PATCH 4/7] powerpc: Remove core support for 40x
From: Christophe Leroy <christophe.leroy@...roup.eu>
Now that 40x platforms have gone, remove support
for 40x in the core of powerpc arch.
Signed-off-by: Christophe Leroy <christophe.leroy@...roup.eu>
Signed-off-by: Michael Ellerman <mpe@...erman.id.au>
---
arch/powerpc/include/asm/cputable.h | 7 -
arch/powerpc/include/asm/mmu.h | 7 -
arch/powerpc/include/asm/nohash/32/mmu-40x.h | 68 --
arch/powerpc/include/asm/nohash/32/pgtable.h | 4 +-
arch/powerpc/include/asm/nohash/32/pte-40x.h | 73 --
arch/powerpc/include/asm/nohash/mmu.h | 5 +-
arch/powerpc/include/asm/reg.h | 25 +-
arch/powerpc/include/asm/reg_booke.h | 113 +--
arch/powerpc/include/asm/time.h | 7 +-
arch/powerpc/include/asm/udbg.h | 1 -
arch/powerpc/kernel/Makefile | 1 -
arch/powerpc/kernel/cpu_specs.h | 4 -
arch/powerpc/kernel/cpu_specs_40x.h | 280 -------
arch/powerpc/kernel/entry_32.S | 40 -
arch/powerpc/kernel/head_32.h | 12 +-
arch/powerpc/kernel/head_40x.S | 721 -------------------
arch/powerpc/kernel/head_booke.h | 3 +-
arch/powerpc/kernel/misc_32.S | 40 -
arch/powerpc/kernel/traps.c | 2 +-
arch/powerpc/kernel/udbg.c | 3 -
arch/powerpc/kernel/udbg_16550.c | 23 -
arch/powerpc/mm/mmu_decl.h | 8 +-
arch/powerpc/mm/nohash/40x.c | 161 -----
arch/powerpc/mm/nohash/Makefile | 1 -
arch/powerpc/mm/nohash/kup.c | 2 -
arch/powerpc/mm/nohash/mmu_context.c | 3 -
arch/powerpc/mm/nohash/tlb_low.S | 27 +-
arch/powerpc/platforms/4xx/pci.c | 100 ---
scripts/head-object-list.txt | 1 -
29 files changed, 14 insertions(+), 1728 deletions(-)
delete mode 100644 arch/powerpc/include/asm/nohash/32/mmu-40x.h
delete mode 100644 arch/powerpc/include/asm/nohash/32/pte-40x.h
delete mode 100644 arch/powerpc/kernel/cpu_specs_40x.h
delete mode 100644 arch/powerpc/kernel/head_40x.S
delete mode 100644 arch/powerpc/mm/nohash/40x.c
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index 07a204d21034..201218faed61 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -353,7 +353,6 @@ static inline void cpu_feature_keys_init(void) { }
CPU_FTR_COMMON | CPU_FTR_FPU_UNAVAILABLE | CPU_FTR_NOEXECUTE)
#define CPU_FTRS_CLASSIC32 (CPU_FTR_COMMON)
#define CPU_FTRS_8XX (CPU_FTR_NOEXECUTE)
-#define CPU_FTRS_40X (CPU_FTR_NOEXECUTE)
#define CPU_FTRS_44X (CPU_FTR_NOEXECUTE)
#define CPU_FTRS_440x6 (CPU_FTR_NOEXECUTE | \
CPU_FTR_INDEXED_DCR)
@@ -507,9 +506,6 @@ enum {
#ifdef CONFIG_PPC_8xx
CPU_FTRS_8XX |
#endif
-#ifdef CONFIG_40x
- CPU_FTRS_40X |
-#endif
#ifdef CONFIG_PPC_47x
CPU_FTRS_47X | CPU_FTR_476_DD2 |
#elif defined(CONFIG_44x)
@@ -582,9 +578,6 @@ enum {
#ifdef CONFIG_PPC_8xx
CPU_FTRS_8XX &
#endif
-#ifdef CONFIG_40x
- CPU_FTRS_40X &
-#endif
#ifdef CONFIG_PPC_47x
CPU_FTRS_47X &
#elif defined(CONFIG_44x)
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index 24f830cf9bb4..45d33ea0a172 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -16,7 +16,6 @@
*/
#define MMU_FTR_HPTE_TABLE ASM_CONST(0x00000001)
#define MMU_FTR_TYPE_8xx ASM_CONST(0x00000002)
-#define MMU_FTR_TYPE_40x ASM_CONST(0x00000004)
#define MMU_FTR_TYPE_44x ASM_CONST(0x00000008)
#define MMU_FTR_TYPE_FSL_E ASM_CONST(0x00000010)
#define MMU_FTR_TYPE_47x ASM_CONST(0x00000020)
@@ -153,9 +152,6 @@ enum {
#ifdef CONFIG_PPC_8xx
MMU_FTR_TYPE_8xx |
#endif
-#ifdef CONFIG_40x
- MMU_FTR_TYPE_40x |
-#endif
#ifdef CONFIG_PPC_47x
MMU_FTR_TYPE_47x | MMU_FTR_USE_TLBIVAX_BCAST | MMU_FTR_LOCK_BCAST_INVAL |
#elif defined(CONFIG_44x)
@@ -202,9 +198,6 @@ enum {
#ifdef CONFIG_PPC_8xx
#define MMU_FTRS_ALWAYS MMU_FTR_TYPE_8xx
#endif
-#ifdef CONFIG_40x
-#define MMU_FTRS_ALWAYS MMU_FTR_TYPE_40x
-#endif
#ifdef CONFIG_PPC_47x
#define MMU_FTRS_ALWAYS MMU_FTR_TYPE_47x
#elif defined(CONFIG_44x)
diff --git a/arch/powerpc/include/asm/nohash/32/mmu-40x.h b/arch/powerpc/include/asm/nohash/32/mmu-40x.h
deleted file mode 100644
index 8a8f13a22cf4..000000000000
--- a/arch/powerpc/include/asm/nohash/32/mmu-40x.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_POWERPC_MMU_40X_H_
-#define _ASM_POWERPC_MMU_40X_H_
-
-/*
- * PPC40x support
- */
-
-#define PPC40X_TLB_SIZE 64
-
-/*
- * TLB entries are defined by a "high" tag portion and a "low" data
- * portion. On all architectures, the data portion is 32-bits.
- *
- * TLB entries are managed entirely under software control by reading,
- * writing, and searchoing using the 4xx-specific tlbre, tlbwr, and tlbsx
- * instructions.
- */
-
-#define TLB_LO 1
-#define TLB_HI 0
-
-#define TLB_DATA TLB_LO
-#define TLB_TAG TLB_HI
-
-/* Tag portion */
-
-#define TLB_EPN_MASK 0xFFFFFC00 /* Effective Page Number */
-#define TLB_PAGESZ_MASK 0x00000380
-#define TLB_PAGESZ(x) (((x) & 0x7) << 7)
-#define PAGESZ_1K 0
-#define PAGESZ_4K 1
-#define PAGESZ_16K 2
-#define PAGESZ_64K 3
-#define PAGESZ_256K 4
-#define PAGESZ_1M 5
-#define PAGESZ_4M 6
-#define PAGESZ_16M 7
-#define TLB_VALID 0x00000040 /* Entry is valid */
-
-/* Data portion */
-
-#define TLB_RPN_MASK 0xFFFFFC00 /* Real Page Number */
-#define TLB_PERM_MASK 0x00000300
-#define TLB_EX 0x00000200 /* Instruction execution allowed */
-#define TLB_WR 0x00000100 /* Writes permitted */
-#define TLB_ZSEL_MASK 0x000000F0
-#define TLB_ZSEL(x) (((x) & 0xF) << 4)
-#define TLB_ATTR_MASK 0x0000000F
-#define TLB_W 0x00000008 /* Caching is write-through */
-#define TLB_I 0x00000004 /* Caching is inhibited */
-#define TLB_M 0x00000002 /* Memory is coherent */
-#define TLB_G 0x00000001 /* Memory is guarded from prefetch */
-
-#ifndef __ASSEMBLY__
-
-typedef struct {
- unsigned int id;
- unsigned int active;
- void __user *vdso;
-} mm_context_t;
-
-#endif /* !__ASSEMBLY__ */
-
-#define mmu_virtual_psize MMU_PAGE_4K
-#define mmu_linear_psize MMU_PAGE_256M
-
-#endif /* _ASM_POWERPC_MMU_40X_H_ */
diff --git a/arch/powerpc/include/asm/nohash/32/pgtable.h b/arch/powerpc/include/asm/nohash/32/pgtable.h
index 9164a9e41b02..9508399dd036 100644
--- a/arch/powerpc/include/asm/nohash/32/pgtable.h
+++ b/arch/powerpc/include/asm/nohash/32/pgtable.h
@@ -118,9 +118,7 @@
* (hardware-defined) PowerPC PTE as closely as possible.
*/
-#if defined(CONFIG_40x)
-#include <asm/nohash/32/pte-40x.h>
-#elif defined(CONFIG_44x)
+#if defined(CONFIG_44x)
#include <asm/nohash/32/pte-44x.h>
#elif defined(CONFIG_PPC_85xx) && defined(CONFIG_PTE_64BIT)
#include <asm/nohash/pte-e500.h>
diff --git a/arch/powerpc/include/asm/nohash/32/pte-40x.h b/arch/powerpc/include/asm/nohash/32/pte-40x.h
deleted file mode 100644
index d759cfd74754..000000000000
--- a/arch/powerpc/include/asm/nohash/32/pte-40x.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_POWERPC_NOHASH_32_PTE_40x_H
-#define _ASM_POWERPC_NOHASH_32_PTE_40x_H
-#ifdef __KERNEL__
-
-/*
- * At present, all PowerPC 400-class processors share a similar TLB
- * architecture. The instruction and data sides share a unified,
- * 64-entry, fully-associative TLB which is maintained totally under
- * software control. In addition, the instruction side has a
- * hardware-managed, 4-entry, fully-associative TLB which serves as a
- * first level to the shared TLB. These two TLBs are known as the UTLB
- * and ITLB, respectively (see "mmu.h" for definitions).
- *
- * There are several potential gotchas here. The 40x hardware TLBLO
- * field looks like this:
- *
- * 0 1 2 3 4 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31
- * RPN..................... 0 0 EX WR ZSEL....... W I M G
- *
- * Where possible we make the Linux PTE bits match up with this
- *
- * - bits 20 and 21 must be cleared, because we use 4k pages (40x can
- * support down to 1k pages), this is done in the TLBMiss exception
- * handler.
- * - We use only zones 0 (for kernel pages) and 1 (for user pages)
- * of the 16 available. Bit 24-26 of the TLB are cleared in the TLB
- * miss handler. Bit 27 is PAGE_USER, thus selecting the correct
- * zone.
- * - PRESENT *must* be in the bottom two bits because swap PTEs
- * use the top 30 bits. Because 40x doesn't support SMP anyway, M is
- * irrelevant so we borrow it for PAGE_PRESENT. Bit 30
- * is cleared in the TLB miss handler before the TLB entry is loaded.
- * - All other bits of the PTE are loaded into TLBLO without
- * modification, leaving us only the bits 20, 21, 24, 25, 26, 30 for
- * software PTE bits. We actually use bits 21, 24, 25, and
- * 30 respectively for the software bits: ACCESSED, DIRTY, RW, and
- * PRESENT.
- */
-
-#define _PAGE_GUARDED 0x001 /* G: page is guarded from prefetch */
-#define _PAGE_PRESENT 0x002 /* software: PTE contains a translation */
-#define _PAGE_NO_CACHE 0x004 /* I: caching is inhibited */
-#define _PAGE_WRITETHRU 0x008 /* W: caching is write-through */
-#define _PAGE_READ 0x010 /* software: read permission */
-#define _PAGE_SPECIAL 0x020 /* software: Special page */
-#define _PAGE_DIRTY 0x080 /* software: dirty page */
-#define _PAGE_WRITE 0x100 /* hardware: WR, anded with dirty in exception */
-#define _PAGE_EXEC 0x200 /* hardware: EX permission */
-#define _PAGE_ACCESSED 0x400 /* software: R: page referenced */
-
-/* No page size encoding in the linux PTE */
-#define _PAGE_PSIZE 0
-
-/* cache related flags non existing on 40x */
-#define _PAGE_COHERENT 0
-
-#define _PMD_PRESENT 0x400 /* PMD points to page of PTEs */
-#define _PMD_PRESENT_MASK _PMD_PRESENT
-#define _PMD_BAD 0x802
-#define _PMD_SIZE_4M 0x0c0
-#define _PMD_SIZE_16M 0x0e0
-#define _PMD_USER 0
-
-#define _PTE_NONE_MASK 0
-
-#define _PAGE_BASE_NC (_PAGE_PRESENT | _PAGE_ACCESSED)
-#define _PAGE_BASE (_PAGE_BASE_NC)
-
-#include <asm/pgtable-masks.h>
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_NOHASH_32_PTE_40x_H */
diff --git a/arch/powerpc/include/asm/nohash/mmu.h b/arch/powerpc/include/asm/nohash/mmu.h
index e264be219fdb..4cc795044103 100644
--- a/arch/powerpc/include/asm/nohash/mmu.h
+++ b/arch/powerpc/include/asm/nohash/mmu.h
@@ -2,10 +2,7 @@
#ifndef _ASM_POWERPC_NOHASH_MMU_H_
#define _ASM_POWERPC_NOHASH_MMU_H_
-#if defined(CONFIG_40x)
-/* 40x-style software loaded TLB */
-#include <asm/nohash/32/mmu-40x.h>
-#elif defined(CONFIG_44x)
+#if defined(CONFIG_44x)
/* 44x-style software loaded TLB */
#include <asm/nohash/32/mmu-44x.h>
#elif defined(CONFIG_PPC_E500)
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index d3d1aea009b4..85b98f625053 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -233,14 +233,10 @@
/* Special Purpose Registers (SPRNs)*/
-#ifdef CONFIG_40x
-#define SPRN_PID 0x3B1 /* Process ID */
-#else
#define SPRN_PID 0x030 /* Process ID */
#ifdef CONFIG_BOOKE
#define SPRN_PID0 SPRN_PID/* Process ID Register 0 */
#endif
-#endif
#define SPRN_CTR 0x009 /* Count Register */
#define SPRN_DSCR 0x11
@@ -527,7 +523,7 @@
#define SPRN_TSCR 0x399 /* Thread Switch Control Register */
#define SPRN_DEC 0x016 /* Decrement Register */
-#define SPRN_PIT 0x3DB /* Programmable Interval Timer (40x/BOOKE) */
+#define SPRN_PIT 0x3DB /* Programmable Interval Timer (BOOKE) */
#define SPRN_DER 0x095 /* Debug Enable Register */
#define DER_RSTE 0x40000000 /* Reset Interrupt */
@@ -1116,15 +1112,6 @@
* - SPRG2 indicator that we are in RTAS
* - SPRG4 (603 only) pseudo TLB LRU data
*
- * 32-bit 40x:
- * - SPRG0 scratch for exception vectors
- * - SPRG1 scratch for exception vectors
- * - SPRG2 scratch for exception vectors
- * - SPRG4 scratch for exception vectors (not 403)
- * - SPRG5 scratch for exception vectors (not 403)
- * - SPRG6 scratch for exception vectors (not 403)
- * - SPRG7 scratch for exception vectors (not 403)
- *
* 32-bit 440 and FSL BookE:
* - SPRG0 scratch for exception vectors
* - SPRG1 scratch for exception vectors (*)
@@ -1216,16 +1203,6 @@
#define SPRN_SPRG_603_LRU SPRN_SPRG4
#endif
-#ifdef CONFIG_40x
-#define SPRN_SPRG_SCRATCH0 SPRN_SPRG0
-#define SPRN_SPRG_SCRATCH1 SPRN_SPRG1
-#define SPRN_SPRG_SCRATCH2 SPRN_SPRG2
-#define SPRN_SPRG_SCRATCH3 SPRN_SPRG4
-#define SPRN_SPRG_SCRATCH4 SPRN_SPRG5
-#define SPRN_SPRG_SCRATCH5 SPRN_SPRG6
-#define SPRN_SPRG_SCRATCH6 SPRN_SPRG7
-#endif
-
#ifdef CONFIG_BOOKE
#define SPRN_SPRG_RSCRATCH0 SPRN_SPRG0
#define SPRN_SPRG_WSCRATCH0 SPRN_SPRG0
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index af56980b6cdb..656bfaf91526 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -1,10 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Contains register definitions common to the Book E PowerPC
- * specification. Notice that while the IBM-40x series of CPUs
- * are not true Book E PowerPCs, they borrowed a number of features
- * before Book E was finalized, and are included here as well. Unfortunately,
- * they sometimes used different locations than true Book E CPUs did.
+ * specification.
*
* Copyright 2009-2010 Freescale Semiconductor, Inc.
*/
@@ -42,9 +39,6 @@
#define MSR_KERNEL (MSR_ | MSR_64BIT)
#define MSR_USER32 (MSR_ | MSR_PR | MSR_EE)
#define MSR_USER64 (MSR_USER32 | MSR_64BIT)
-#elif defined (CONFIG_40x)
-#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE)
-#define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE)
#else
#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_CE)
#define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE)
@@ -157,7 +151,6 @@
#define SPRN_TLB3CFG 0x2B3 /* TLB 3 Config Register */
#define SPRN_EPR 0x2BE /* External Proxy Register */
#define SPRN_CCR1 0x378 /* Core Configuration Register 1 */
-#define SPRN_ZPR 0x3B0 /* Zone Protection Register (40x) */
#define SPRN_MAS7 0x3B0 /* MMU Assist Register 7 */
#define SPRN_MMUCR 0x3B2 /* MMU Control Register */
#define SPRN_CCR0 0x3B3 /* Core Configuration Register 0 */
@@ -166,7 +159,6 @@
#define SPRN_SGR 0x3B9 /* Storage Guarded Register */
#define SPRN_DCWR 0x3BA /* Data Cache Write-thru Register */
#define SPRN_SLER 0x3BB /* Little-endian real mode */
-#define SPRN_SU0R 0x3BC /* "User 0" real mode (40x) */
#define SPRN_DCMP 0x3D1 /* Data TLB Compare Register */
#define SPRN_ICDBDR 0x3D3 /* Instruction Cache Debug Data Register */
#define SPRN_EVPR 0x3D6 /* Exception Vector Prefix Register */
@@ -183,10 +175,8 @@
#define SPRN_SVR 0x3FF /* System Version Register */
/*
- * SPRs which have conflicting definitions on true Book E versus classic,
- * or IBM 40x.
+ * SPRs which have conflicting definitions on true Book E versus classic.
*/
-#ifdef CONFIG_BOOKE
#define SPRN_CSRR0 0x03A /* Critical Save and Restore Register 0 */
#define SPRN_CSRR1 0x03B /* Critical Save and Restore Register 1 */
#define SPRN_DEAR 0x03D /* Data Error Address Register */
@@ -201,22 +191,6 @@
#define SPRN_DAC2 0x13D /* Data Address Compare 2 */
#define SPRN_TSR 0x150 /* Timer Status Register */
#define SPRN_TCR 0x154 /* Timer Control Register */
-#endif /* Book E */
-#ifdef CONFIG_40x
-#define SPRN_DBCR1 0x3BD /* Debug Control Register 1 */
-#define SPRN_ESR 0x3D4 /* Exception Syndrome Register */
-#define SPRN_DEAR 0x3D5 /* Data Error Address Register */
-#define SPRN_TSR 0x3D8 /* Timer Status Register */
-#define SPRN_TCR 0x3DA /* Timer Control Register */
-#define SPRN_SRR2 0x3DE /* Save/Restore Register 2 */
-#define SPRN_SRR3 0x3DF /* Save/Restore Register 3 */
-#define SPRN_DBSR 0x3F0 /* Debug Status Register */
-#define SPRN_DBCR0 0x3F2 /* Debug Control Register 0 */
-#define SPRN_DAC1 0x3F6 /* Data Address Compare 1 */
-#define SPRN_DAC2 0x3F7 /* Data Address Compare 2 */
-#define SPRN_CSRR0 SPRN_SRR2 /* Critical Save and Restore Register 0 */
-#define SPRN_CSRR1 SPRN_SRR3 /* Critical Save and Restore Register 1 */
-#endif
#define SPRN_HACOP 0x15F /* Hypervisor Available Coprocessor Register */
/* Bit definitions for CCR1. */
@@ -296,10 +270,6 @@
#endif
/* Bit definitions for the DBSR. */
-/*
- * DBSR bits which have conflicting definitions on true Book E versus IBM 40x.
- */
-#ifdef CONFIG_BOOKE
#define DBSR_IDE 0x80000000 /* Imprecise Debug Event */
#define DBSR_MRR 0x30000000 /* Most Recent Reset */
#define DBSR_IC 0x08000000 /* Instruction Completion */
@@ -319,21 +289,6 @@
#define DBSR_CRET 0x00000020 /* Critical Return Debug Event */
#define DBSR_IAC12ATS 0x00000002 /* Instr Address Compare 1/2 Toggle */
#define DBSR_IAC34ATS 0x00000001 /* Instr Address Compare 3/4 Toggle */
-#endif
-#ifdef CONFIG_40x
-#define DBSR_IC 0x80000000 /* Instruction Completion */
-#define DBSR_BT 0x40000000 /* Branch taken */
-#define DBSR_IRPT 0x20000000 /* Exception Debug Event */
-#define DBSR_TIE 0x10000000 /* Trap Instruction debug Event */
-#define DBSR_IAC1 0x04000000 /* Instruction Address Compare 1 Event */
-#define DBSR_IAC2 0x02000000 /* Instruction Address Compare 2 Event */
-#define DBSR_IAC3 0x00080000 /* Instruction Address Compare 3 Event */
-#define DBSR_IAC4 0x00040000 /* Instruction Address Compare 4 Event */
-#define DBSR_DAC1R 0x01000000 /* Data Address Compare 1 Read Event */
-#define DBSR_DAC1W 0x00800000 /* Data Address Compare 1 Write Event */
-#define DBSR_DAC2R 0x00400000 /* Data Address Compare 2 Read Event */
-#define DBSR_DAC2W 0x00200000 /* Data Address Compare 2 Write Event */
-#endif
/* Bit definitions related to the ESR. */
#define ESR_MCI 0x80000000 /* Machine Check - Instruction */
@@ -355,69 +310,6 @@
#define ESR_SPV 0x00000080 /* Signal Processing operation */
/* Bit definitions related to the DBCR0. */
-#if defined(CONFIG_40x)
-#define DBCR0_EDM 0x80000000 /* External Debug Mode */
-#define DBCR0_IDM 0x40000000 /* Internal Debug Mode */
-#define DBCR0_RST 0x30000000 /* all the bits in the RST field */
-#define DBCR0_RST_SYSTEM 0x30000000 /* System Reset */
-#define DBCR0_RST_CHIP 0x20000000 /* Chip Reset */
-#define DBCR0_RST_CORE 0x10000000 /* Core Reset */
-#define DBCR0_RST_NONE 0x00000000 /* No Reset */
-#define DBCR0_IC 0x08000000 /* Instruction Completion */
-#define DBCR0_ICMP DBCR0_IC
-#define DBCR0_BT 0x04000000 /* Branch Taken */
-#define DBCR0_BRT DBCR0_BT
-#define DBCR0_EDE 0x02000000 /* Exception Debug Event */
-#define DBCR0_IRPT DBCR0_EDE
-#define DBCR0_TDE 0x01000000 /* TRAP Debug Event */
-#define DBCR0_IA1 0x00800000 /* Instr Addr compare 1 enable */
-#define DBCR0_IAC1 DBCR0_IA1
-#define DBCR0_IA2 0x00400000 /* Instr Addr compare 2 enable */
-#define DBCR0_IAC2 DBCR0_IA2
-#define DBCR0_IA12 0x00200000 /* Instr Addr 1-2 range enable */
-#define DBCR0_IA12X 0x00100000 /* Instr Addr 1-2 range eXclusive */
-#define DBCR0_IA3 0x00080000 /* Instr Addr compare 3 enable */
-#define DBCR0_IAC3 DBCR0_IA3
-#define DBCR0_IA4 0x00040000 /* Instr Addr compare 4 enable */
-#define DBCR0_IAC4 DBCR0_IA4
-#define DBCR0_IA34 0x00020000 /* Instr Addr 3-4 range Enable */
-#define DBCR0_IA34X 0x00010000 /* Instr Addr 3-4 range eXclusive */
-#define DBCR0_IA12T 0x00008000 /* Instr Addr 1-2 range Toggle */
-#define DBCR0_IA34T 0x00004000 /* Instr Addr 3-4 range Toggle */
-#define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */
-
-#define dbcr_iac_range(task) ((task)->thread.debug.dbcr0)
-#define DBCR_IAC12I DBCR0_IA12 /* Range Inclusive */
-#define DBCR_IAC12X (DBCR0_IA12 | DBCR0_IA12X) /* Range Exclusive */
-#define DBCR_IAC12MODE (DBCR0_IA12 | DBCR0_IA12X) /* IAC 1-2 Mode Bits */
-#define DBCR_IAC34I DBCR0_IA34 /* Range Inclusive */
-#define DBCR_IAC34X (DBCR0_IA34 | DBCR0_IA34X) /* Range Exclusive */
-#define DBCR_IAC34MODE (DBCR0_IA34 | DBCR0_IA34X) /* IAC 3-4 Mode Bits */
-
-/* Bit definitions related to the DBCR1. */
-#define DBCR1_DAC1R 0x80000000 /* DAC1 Read Debug Event */
-#define DBCR1_DAC2R 0x40000000 /* DAC2 Read Debug Event */
-#define DBCR1_DAC1W 0x20000000 /* DAC1 Write Debug Event */
-#define DBCR1_DAC2W 0x10000000 /* DAC2 Write Debug Event */
-
-#define dbcr_dac(task) ((task)->thread.debug.dbcr1)
-#define DBCR_DAC1R DBCR1_DAC1R
-#define DBCR_DAC1W DBCR1_DAC1W
-#define DBCR_DAC2R DBCR1_DAC2R
-#define DBCR_DAC2W DBCR1_DAC2W
-
-/*
- * Are there any active Debug Events represented in the
- * Debug Control Registers?
- */
-#define DBCR0_ACTIVE_EVENTS (DBCR0_ICMP | DBCR0_IAC1 | DBCR0_IAC2 | \
- DBCR0_IAC3 | DBCR0_IAC4)
-#define DBCR1_ACTIVE_EVENTS (DBCR1_DAC1R | DBCR1_DAC2R | \
- DBCR1_DAC1W | DBCR1_DAC2W)
-#define DBCR_ACTIVE_EVENTS(dbcr0, dbcr1) (((dbcr0) & DBCR0_ACTIVE_EVENTS) || \
- ((dbcr1) & DBCR1_ACTIVE_EVENTS))
-
-#elif defined(CONFIG_BOOKE)
#define DBCR0_EDM 0x80000000 /* External Debug Mode */
#define DBCR0_IDM 0x40000000 /* Internal Debug Mode */
#define DBCR0_RST 0x30000000 /* all the bits in the RST field */
@@ -518,7 +410,6 @@
#define DBCR_ACTIVE_EVENTS(dbcr0, dbcr1) (((dbcr0) & DBCR0_ACTIVE_EVENTS) || \
((dbcr1) & DBCR1_ACTIVE_EVENTS))
-#endif /* #elif defined(CONFIG_BOOKE) */
/* Bit definitions related to the TCR. */
#define TCR_WP(x) (((x)&0x3)<<30) /* WDT Period */
diff --git a/arch/powerpc/include/asm/time.h b/arch/powerpc/include/asm/time.h
index 9f50766c4623..221c8f8ff89b 100644
--- a/arch/powerpc/include/asm/time.h
+++ b/arch/powerpc/include/asm/time.h
@@ -58,9 +58,6 @@ static inline u64 get_vtb(void)
*/
static inline u64 get_dec(void)
{
- if (IS_ENABLED(CONFIG_40x))
- return mfspr(SPRN_PIT);
-
return mfspr(SPRN_DEC);
}
@@ -71,9 +68,7 @@ static inline u64 get_dec(void)
*/
static inline void set_dec(u64 val)
{
- if (IS_ENABLED(CONFIG_40x))
- mtspr(SPRN_PIT, (u32)val);
- else if (IS_ENABLED(CONFIG_BOOKE))
+ if (IS_ENABLED(CONFIG_BOOKE))
mtspr(SPRN_DEC, val);
else
mtspr(SPRN_DEC, val - 1);
diff --git a/arch/powerpc/include/asm/udbg.h b/arch/powerpc/include/asm/udbg.h
index b1f094728b35..289023f7a656 100644
--- a/arch/powerpc/include/asm/udbg.h
+++ b/arch/powerpc/include/asm/udbg.h
@@ -44,7 +44,6 @@ void __init udbg_init_rtas_panel(void);
void __init udbg_init_rtas_console(void);
void __init udbg_init_btext(void);
void __init udbg_init_44x_as1(void);
-void __init udbg_init_40x_realmode(void);
void __init udbg_init_cpm(void);
void __init udbg_init_usbgecko(void);
void __init udbg_init_memcons(void);
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index d3282fbea4f2..768e3628b97b 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -125,7 +125,6 @@ obj-$(CONFIG_JUMP_LABEL) += jump_label.o
obj-$(CONFIG_PPC64) += head_64.o
obj-$(CONFIG_PPC_BOOK3S_32) += head_book3s_32.o
-obj-$(CONFIG_40x) += head_40x.o
obj-$(CONFIG_44x) += head_44x.o
obj-$(CONFIG_PPC_8xx) += head_8xx.o
obj-$(CONFIG_PPC_85xx) += head_85xx.o
diff --git a/arch/powerpc/kernel/cpu_specs.h b/arch/powerpc/kernel/cpu_specs.h
index 85ded3f77204..5ea14605bb41 100644
--- a/arch/powerpc/kernel/cpu_specs.h
+++ b/arch/powerpc/kernel/cpu_specs.h
@@ -1,9 +1,5 @@
/* SPDX-License-Identifier: GPL-2.0-or-later */
-#ifdef CONFIG_40x
-#include "cpu_specs_40x.h"
-#endif
-
#ifdef CONFIG_PPC_47x
#include "cpu_specs_47x.h"
#elif defined(CONFIG_44x)
diff --git a/arch/powerpc/kernel/cpu_specs_40x.h b/arch/powerpc/kernel/cpu_specs_40x.h
deleted file mode 100644
index a1362a75b8c8..000000000000
--- a/arch/powerpc/kernel/cpu_specs_40x.h
+++ /dev/null
@@ -1,280 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2001 Ben. Herrenschmidt (benh@...nel.crashing.org)
- */
-
-static struct cpu_spec cpu_specs[] __initdata = {
- { /* STB 04xxx */
- .pvr_mask = 0xffff0000,
- .pvr_value = 0x41810000,
- .cpu_name = "STB04xxx",
- .cpu_features = CPU_FTRS_40X,
- .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU |
- PPC_FEATURE_HAS_4xxMAC,
- .mmu_features = MMU_FTR_TYPE_40x,
- .icache_bsize = 32,
- .dcache_bsize = 32,
- .machine_check = machine_check_4xx,
- .platform = "ppc405",
- },
- { /* NP405L */
- .pvr_mask = 0xffff0000,
- .pvr_value = 0x41610000,
- .cpu_name = "NP405L",
- .cpu_features = CPU_FTRS_40X,
- .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU |
- PPC_FEATURE_HAS_4xxMAC,
- .mmu_features = MMU_FTR_TYPE_40x,
- .icache_bsize = 32,
- .dcache_bsize = 32,
- .machine_check = machine_check_4xx,
- .platform = "ppc405",
- },
- { /* NP4GS3 */
- .pvr_mask = 0xffff0000,
- .pvr_value = 0x40B10000,
- .cpu_name = "NP4GS3",
- .cpu_features = CPU_FTRS_40X,
- .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU |
- PPC_FEATURE_HAS_4xxMAC,
- .mmu_features = MMU_FTR_TYPE_40x,
- .icache_bsize = 32,
- .dcache_bsize = 32,
- .machine_check = machine_check_4xx,
- .platform = "ppc405",
- },
- { /* NP405H */
- .pvr_mask = 0xffff0000,
- .pvr_value = 0x41410000,
- .cpu_name = "NP405H",
- .cpu_features = CPU_FTRS_40X,
- .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU |
- PPC_FEATURE_HAS_4xxMAC,
- .mmu_features = MMU_FTR_TYPE_40x,
- .icache_bsize = 32,
- .dcache_bsize = 32,
- .machine_check = machine_check_4xx,
- .platform = "ppc405",
- },
- { /* 405GPr */
- .pvr_mask = 0xffff0000,
- .pvr_value = 0x50910000,
- .cpu_name = "405GPr",
- .cpu_features = CPU_FTRS_40X,
- .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU |
- PPC_FEATURE_HAS_4xxMAC,
- .mmu_features = MMU_FTR_TYPE_40x,
- .icache_bsize = 32,
- .dcache_bsize = 32,
- .machine_check = machine_check_4xx,
- .platform = "ppc405",
- },
- { /* STBx25xx */
- .pvr_mask = 0xffff0000,
- .pvr_value = 0x51510000,
- .cpu_name = "STBx25xx",
- .cpu_features = CPU_FTRS_40X,
- .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU |
- PPC_FEATURE_HAS_4xxMAC,
- .mmu_features = MMU_FTR_TYPE_40x,
- .icache_bsize = 32,
- .dcache_bsize = 32,
- .machine_check = machine_check_4xx,
- .platform = "ppc405",
- },
- { /* 405LP */
- .pvr_mask = 0xffff0000,
- .pvr_value = 0x41F10000,
- .cpu_name = "405LP",
- .cpu_features = CPU_FTRS_40X,
- .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
- .mmu_features = MMU_FTR_TYPE_40x,
- .icache_bsize = 32,
- .dcache_bsize = 32,
- .machine_check = machine_check_4xx,
- .platform = "ppc405",
- },
- { /* 405EP */
- .pvr_mask = 0xffff0000,
- .pvr_value = 0x51210000,
- .cpu_name = "405EP",
- .cpu_features = CPU_FTRS_40X,
- .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU |
- PPC_FEATURE_HAS_4xxMAC,
- .mmu_features = MMU_FTR_TYPE_40x,
- .icache_bsize = 32,
- .dcache_bsize = 32,
- .machine_check = machine_check_4xx,
- .platform = "ppc405",
- },
- { /* 405EX Rev. A/B with Security */
- .pvr_mask = 0xffff000f,
- .pvr_value = 0x12910007,
- .cpu_name = "405EX Rev. A/B",
- .cpu_features = CPU_FTRS_40X,
- .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU |
- PPC_FEATURE_HAS_4xxMAC,
- .mmu_features = MMU_FTR_TYPE_40x,
- .icache_bsize = 32,
- .dcache_bsize = 32,
- .machine_check = machine_check_4xx,
- .platform = "ppc405",
- },
- { /* 405EX Rev. C without Security */
- .pvr_mask = 0xffff000f,
- .pvr_value = 0x1291000d,
- .cpu_name = "405EX Rev. C",
- .cpu_features = CPU_FTRS_40X,
- .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU |
- PPC_FEATURE_HAS_4xxMAC,
- .mmu_features = MMU_FTR_TYPE_40x,
- .icache_bsize = 32,
- .dcache_bsize = 32,
- .machine_check = machine_check_4xx,
- .platform = "ppc405",
- },
- { /* 405EX Rev. C with Security */
- .pvr_mask = 0xffff000f,
- .pvr_value = 0x1291000f,
- .cpu_name = "405EX Rev. C",
- .cpu_features = CPU_FTRS_40X,
- .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU |
- PPC_FEATURE_HAS_4xxMAC,
- .mmu_features = MMU_FTR_TYPE_40x,
- .icache_bsize = 32,
- .dcache_bsize = 32,
- .machine_check = machine_check_4xx,
- .platform = "ppc405",
- },
- { /* 405EX Rev. D without Security */
- .pvr_mask = 0xffff000f,
- .pvr_value = 0x12910003,
- .cpu_name = "405EX Rev. D",
- .cpu_features = CPU_FTRS_40X,
- .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU |
- PPC_FEATURE_HAS_4xxMAC,
- .mmu_features = MMU_FTR_TYPE_40x,
- .icache_bsize = 32,
- .dcache_bsize = 32,
- .machine_check = machine_check_4xx,
- .platform = "ppc405",
- },
- { /* 405EX Rev. D with Security */
- .pvr_mask = 0xffff000f,
- .pvr_value = 0x12910005,
- .cpu_name = "405EX Rev. D",
- .cpu_features = CPU_FTRS_40X,
- .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU |
- PPC_FEATURE_HAS_4xxMAC,
- .mmu_features = MMU_FTR_TYPE_40x,
- .icache_bsize = 32,
- .dcache_bsize = 32,
- .machine_check = machine_check_4xx,
- .platform = "ppc405",
- },
- { /* 405EXr Rev. A/B without Security */
- .pvr_mask = 0xffff000f,
- .pvr_value = 0x12910001,
- .cpu_name = "405EXr Rev. A/B",
- .cpu_features = CPU_FTRS_40X,
- .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU |
- PPC_FEATURE_HAS_4xxMAC,
- .mmu_features = MMU_FTR_TYPE_40x,
- .icache_bsize = 32,
- .dcache_bsize = 32,
- .machine_check = machine_check_4xx,
- .platform = "ppc405",
- },
- { /* 405EXr Rev. C without Security */
- .pvr_mask = 0xffff000f,
- .pvr_value = 0x12910009,
- .cpu_name = "405EXr Rev. C",
- .cpu_features = CPU_FTRS_40X,
- .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU |
- PPC_FEATURE_HAS_4xxMAC,
- .mmu_features = MMU_FTR_TYPE_40x,
- .icache_bsize = 32,
- .dcache_bsize = 32,
- .machine_check = machine_check_4xx,
- .platform = "ppc405",
- },
- { /* 405EXr Rev. C with Security */
- .pvr_mask = 0xffff000f,
- .pvr_value = 0x1291000b,
- .cpu_name = "405EXr Rev. C",
- .cpu_features = CPU_FTRS_40X,
- .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU |
- PPC_FEATURE_HAS_4xxMAC,
- .mmu_features = MMU_FTR_TYPE_40x,
- .icache_bsize = 32,
- .dcache_bsize = 32,
- .machine_check = machine_check_4xx,
- .platform = "ppc405",
- },
- { /* 405EXr Rev. D without Security */
- .pvr_mask = 0xffff000f,
- .pvr_value = 0x12910000,
- .cpu_name = "405EXr Rev. D",
- .cpu_features = CPU_FTRS_40X,
- .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU |
- PPC_FEATURE_HAS_4xxMAC,
- .mmu_features = MMU_FTR_TYPE_40x,
- .icache_bsize = 32,
- .dcache_bsize = 32,
- .machine_check = machine_check_4xx,
- .platform = "ppc405",
- },
- { /* 405EXr Rev. D with Security */
- .pvr_mask = 0xffff000f,
- .pvr_value = 0x12910002,
- .cpu_name = "405EXr Rev. D",
- .cpu_features = CPU_FTRS_40X,
- .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU |
- PPC_FEATURE_HAS_4xxMAC,
- .mmu_features = MMU_FTR_TYPE_40x,
- .icache_bsize = 32,
- .dcache_bsize = 32,
- .machine_check = machine_check_4xx,
- .platform = "ppc405",
- },
- {
- /* 405EZ */
- .pvr_mask = 0xffff0000,
- .pvr_value = 0x41510000,
- .cpu_name = "405EZ",
- .cpu_features = CPU_FTRS_40X,
- .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU |
- PPC_FEATURE_HAS_4xxMAC,
- .mmu_features = MMU_FTR_TYPE_40x,
- .icache_bsize = 32,
- .dcache_bsize = 32,
- .machine_check = machine_check_4xx,
- .platform = "ppc405",
- },
- { /* APM8018X */
- .pvr_mask = 0xffff0000,
- .pvr_value = 0x7ff11432,
- .cpu_name = "APM8018X",
- .cpu_features = CPU_FTRS_40X,
- .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU |
- PPC_FEATURE_HAS_4xxMAC,
- .mmu_features = MMU_FTR_TYPE_40x,
- .icache_bsize = 32,
- .dcache_bsize = 32,
- .machine_check = machine_check_4xx,
- .platform = "ppc405",
- },
- { /* default match */
- .pvr_mask = 0x00000000,
- .pvr_value = 0x00000000,
- .cpu_name = "(generic 40x PPC)",
- .cpu_features = CPU_FTRS_40X,
- .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU |
- PPC_FEATURE_HAS_4xxMAC,
- .mmu_features = MMU_FTR_TYPE_40x,
- .icache_bsize = 32,
- .dcache_bsize = 32,
- .machine_check = machine_check_4xx,
- .platform = "ppc405",
- }
-};
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 7eda33a24bb4..070eab8b6a28 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -158,9 +158,6 @@ syscall_exit_finish:
1: REST_GPR(2, r1)
REST_GPR(1, r1)
rfi
-#ifdef CONFIG_40x
- b . /* Prevent prefetch past rfi */
-#endif
3: mtcr r5
lwz r4,_CTR(r1)
@@ -237,9 +234,6 @@ fast_exception_return:
REST_GPR(12, r11)
REST_GPR(11, r11)
rfi
-#ifdef CONFIG_40x
- b . /* Prevent prefetch past rfi */
-#endif
_ASM_NOKPROBE_SYMBOL(fast_exception_return)
/* aargh, a nonrecoverable interrupt, panic */
@@ -296,9 +290,6 @@ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS)
REST_GPR(0, r1)
REST_GPR(1, r1)
rfi
-#ifdef CONFIG_40x
- b . /* Prevent prefetch past rfi */
-#endif
.Lrestore_nvgprs:
REST_NVGPRS(r1)
@@ -346,9 +337,6 @@ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS)
REST_GPR(0, r1)
REST_GPR(1, r1)
rfi
-#ifdef CONFIG_40x
- b . /* Prevent prefetch past rfi */
-#endif
1: /*
* Emulate stack store with update. New r1 value was already calculated
@@ -375,9 +363,6 @@ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS)
mfspr r9, SPRN_SPRG_SCRATCH0
#endif
rfi
-#ifdef CONFIG_40x
- b . /* Prevent prefetch past rfi */
-#endif
_ASM_NOKPROBE_SYMBOL(interrupt_return)
#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
@@ -395,17 +380,6 @@ _ASM_NOKPROBE_SYMBOL(interrupt_return)
* time of the critical interrupt.
*
*/
-#ifdef CONFIG_40x
-#define PPC_40x_TURN_OFF_MSR_DR \
- /* avoid any possible TLB misses here by turning off MSR.DR, we \
- * assume the instructions here are mapped by a pinned TLB entry */ \
- li r10,MSR_IR; \
- mtmsr r10; \
- isync; \
- tophys(r1, r1);
-#else
-#define PPC_40x_TURN_OFF_MSR_DR
-#endif
#define RET_FROM_EXC_LEVEL(exc_lvl_srr0, exc_lvl_srr1, exc_lvl_rfi) \
REST_NVGPRS(r1); \
@@ -423,7 +397,6 @@ _ASM_NOKPROBE_SYMBOL(interrupt_return)
mtlr r11; \
lwz r10,_CCR(r1); \
mtcrf 0xff,r10; \
- PPC_40x_TURN_OFF_MSR_DR; \
lwz r9,_DEAR(r1); \
lwz r10,_ESR(r1); \
mtspr SPRN_DEAR,r9; \
@@ -471,19 +444,6 @@ _ASM_NOKPROBE_SYMBOL(interrupt_return)
#define RESTORE_MMU_REGS
#endif
-#ifdef CONFIG_40x
- .globl ret_from_crit_exc
-ret_from_crit_exc:
- lis r9,crit_srr0@ha;
- lwz r9,crit_srr0@l(r9);
- lis r10,crit_srr1@ha;
- lwz r10,crit_srr1@l(r10);
- mtspr SPRN_SRR0,r9;
- mtspr SPRN_SRR1,r10;
- RET_FROM_EXC_LEVEL(SPRN_CSRR0, SPRN_CSRR1, PPC_RFCI)
-_ASM_NOKPROBE_SYMBOL(ret_from_crit_exc)
-#endif /* CONFIG_40x */
-
#ifdef CONFIG_BOOKE
.globl ret_from_crit_exc
ret_from_crit_exc:
diff --git a/arch/powerpc/kernel/head_32.h b/arch/powerpc/kernel/head_32.h
index f8e2911478a7..9cba7dbf58dd 100644
--- a/arch/powerpc/kernel/head_32.h
+++ b/arch/powerpc/kernel/head_32.h
@@ -21,17 +21,9 @@
mtspr SPRN_SPRG_SCRATCH1,r11
mfspr r10, SPRN_SPRG_THREAD
.if \handle_dar_dsisr
-#ifdef CONFIG_40x
- mfspr r11, SPRN_DEAR
-#else
mfspr r11, SPRN_DAR
-#endif
stw r11, DAR(r10)
-#ifdef CONFIG_40x
- mfspr r11, SPRN_ESR
-#else
mfspr r11, SPRN_DSISR
-#endif
stw r11, DSISR(r10)
.endif
mfspr r11, SPRN_SRR0
@@ -96,9 +88,7 @@
.endif
lwz r9, SRR1(r12)
lwz r12, SRR0(r12)
-#ifdef CONFIG_40x
- rlwinm r9,r9,0,14,12 /* clear MSR_WE (necessary?) */
-#elif defined(CONFIG_PPC_8xx)
+#ifdef CONFIG_PPC_8xx
mtspr SPRN_EID, r2 /* Set MSR_RI */
#else
li r10, MSR_KERNEL /* can take exceptions */
diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S
deleted file mode 100644
index 9fc90410b385..000000000000
--- a/arch/powerpc/kernel/head_40x.S
+++ /dev/null
@@ -1,721 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (c) 1995-1996 Gary Thomas <gdt@...uxppc.org>
- * Initial PowerPC version.
- * Copyright (c) 1996 Cort Dougan <cort@...nmt.edu>
- * Rewritten for PReP
- * Copyright (c) 1996 Paul Mackerras <paulus@...anu.edu.au>
- * Low-level exception handers, MMU support, and rewrite.
- * Copyright (c) 1997 Dan Malek <dmalek@....net>
- * PowerPC 8xx modifications.
- * Copyright (c) 1998-1999 TiVo, Inc.
- * PowerPC 403GCX modifications.
- * Copyright (c) 1999 Grant Erickson <grant@...e.umn.edu>
- * PowerPC 403GCX/405GP modifications.
- * Copyright 2000 MontaVista Software Inc.
- * PPC405 modifications
- * PowerPC 403GCX/405GP modifications.
- * Author: MontaVista Software, Inc.
- * frank_rowand@...sta.com or source@...sta.com
- * debbie_chu@...sta.com
- *
- * Module name: head_4xx.S
- *
- * Description:
- * Kernel execution entry point code.
- */
-
-#include <linux/init.h>
-#include <linux/pgtable.h>
-#include <linux/sizes.h>
-#include <linux/linkage.h>
-
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/mmu.h>
-#include <asm/cputable.h>
-#include <asm/thread_info.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-#include <asm/ptrace.h>
-
-#include "head_32.h"
-
-/* As with the other PowerPC ports, it is expected that when code
- * execution begins here, the following registers contain valid, yet
- * optional, information:
- *
- * r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.)
- * r4 - Starting address of the init RAM disk
- * r5 - Ending address of the init RAM disk
- * r6 - Start of kernel command line string (e.g. "mem=96m")
- * r7 - End of kernel command line string
- *
- * This is all going to change RSN when we add bi_recs....... -- Dan
- */
- __HEAD
-_GLOBAL(_stext);
-_GLOBAL(_start);
-
- mr r31,r3 /* save device tree ptr */
-
- /* We have to turn on the MMU right away so we get cache modes
- * set correctly.
- */
- bl initial_mmu
-
-/* We now have the lower 16 Meg mapped into TLB entries, and the caches
- * ready to work.
- */
-turn_on_mmu:
- lis r0,MSR_KERNEL@h
- ori r0,r0,MSR_KERNEL@l
- mtspr SPRN_SRR1,r0
- lis r0,start_here@h
- ori r0,r0,start_here@l
- mtspr SPRN_SRR0,r0
- rfi /* enables MMU */
- b . /* prevent prefetch past rfi */
-
-/*
- * This area is used for temporarily saving registers during the
- * critical exception prolog.
- */
- . = 0xc0
-crit_save:
-_GLOBAL(crit_r10)
- .space 4
-_GLOBAL(crit_r11)
- .space 4
-_GLOBAL(crit_srr0)
- .space 4
-_GLOBAL(crit_srr1)
- .space 4
-_GLOBAL(crit_r1)
- .space 4
-_GLOBAL(crit_dear)
- .space 4
-_GLOBAL(crit_esr)
- .space 4
-
-/*
- * Exception prolog for critical exceptions. This is a little different
- * from the normal exception prolog above since a critical exception
- * can potentially occur at any point during normal exception processing.
- * Thus we cannot use the same SPRG registers as the normal prolog above.
- * Instead we use a couple of words of memory at low physical addresses.
- * This is OK since we don't support SMP on these processors.
- */
-.macro CRITICAL_EXCEPTION_PROLOG trapno name
- stw r10,crit_r10@l(0) /* save two registers to work with */
- stw r11,crit_r11@l(0)
- mfspr r10,SPRN_SRR0
- mfspr r11,SPRN_SRR1
- stw r10,crit_srr0@l(0)
- stw r11,crit_srr1@l(0)
- mfspr r10,SPRN_DEAR
- mfspr r11,SPRN_ESR
- stw r10,crit_dear@l(0)
- stw r11,crit_esr@l(0)
- mfcr r10 /* save CR in r10 for now */
- mfspr r11,SPRN_SRR3 /* check whether user or kernel */
- andi. r11,r11,MSR_PR
- lis r11,(critirq_ctx-PAGE_OFFSET)@ha
- lwz r11,(critirq_ctx-PAGE_OFFSET)@l(r11)
- beq 1f
- /* COMING FROM USER MODE */
- mfspr r11,SPRN_SPRG_THREAD /* if from user, start at top of */
- lwz r11,TASK_STACK-THREAD(r11) /* this thread's kernel stack */
-1: stw r1,crit_r1@l(0)
- addi r1,r11,THREAD_SIZE-INT_FRAME_SIZE /* Alloc an excpt frm */
- LOAD_REG_IMMEDIATE(r11, MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)) /* re-enable MMU */
- mtspr SPRN_SRR1, r11
- lis r11, 1f@h
- ori r11, r11, 1f@l
- mtspr SPRN_SRR0, r11
- rfi
-
- .text
-1:
-\name\()_virt:
- lwz r11,crit_r1@l(0)
- stw r11,GPR1(r1)
- stw r11,0(r1)
- mr r11,r1
- stw r10,_CCR(r11) /* save various registers */
- stw r12,GPR12(r11)
- stw r9,GPR9(r11)
- mflr r10
- stw r10,_LINK(r11)
- lis r9,PAGE_OFFSET@ha
- lwz r10,crit_r10@l(r9)
- lwz r12,crit_r11@l(r9)
- stw r10,GPR10(r11)
- stw r12,GPR11(r11)
- lwz r12,crit_dear@l(r9)
- lwz r9,crit_esr@l(r9)
- stw r12,_DEAR(r11) /* since they may have had stuff */
- stw r9,_ESR(r11) /* exception was taken */
- mfspr r12,SPRN_SRR2
- mfspr r9,SPRN_SRR3
- rlwinm r9,r9,0,14,12 /* clear MSR_WE (necessary?) */
- COMMON_EXCEPTION_PROLOG_END \trapno + 2
-_ASM_NOKPROBE_SYMBOL(\name\()_virt)
-.endm
-
- /*
- * State at this point:
- * r9 saved in stack frame, now saved SRR3 & ~MSR_WE
- * r10 saved in crit_r10 and in stack frame, trashed
- * r11 saved in crit_r11 and in stack frame,
- * now phys stack/exception frame pointer
- * r12 saved in stack frame, now saved SRR2
- * CR saved in stack frame, CR0.EQ = !SRR3.PR
- * LR, DEAR, ESR in stack frame
- * r1 saved in stack frame, now virt stack/excframe pointer
- * r0, r3-r8 saved in stack frame
- */
-
-/*
- * Exception vectors.
- */
-#define CRITICAL_EXCEPTION(n, label, hdlr) \
- START_EXCEPTION(n, label); \
- CRITICAL_EXCEPTION_PROLOG n label; \
- prepare_transfer_to_handler; \
- bl hdlr; \
- b ret_from_crit_exc
-
-/*
- * 0x0100 - Critical Interrupt Exception
- */
- CRITICAL_EXCEPTION(0x0100, CriticalInterrupt, unknown_exception)
-
-/*
- * 0x0200 - Machine Check Exception
- */
- CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
-
-/*
- * 0x0300 - Data Storage Exception
- * This happens for just a few reasons. U0 set (but we don't do that),
- * or zone protection fault (user violation, write to protected page).
- * The other Data TLB exceptions bail out to this point
- * if they can't resolve the lightweight TLB fault.
- */
- START_EXCEPTION(0x0300, DataStorage)
- EXCEPTION_PROLOG 0x300 DataStorage handle_dar_dsisr=1
- prepare_transfer_to_handler
- bl do_page_fault
- b interrupt_return
-
-/*
- * 0x0400 - Instruction Storage Exception
- * This is caused by a fetch from non-execute or guarded pages.
- */
- START_EXCEPTION(0x0400, InstructionAccess)
- EXCEPTION_PROLOG 0x400 InstructionAccess
- li r5,0
- stw r5, _ESR(r11) /* Zero ESR */
- stw r12, _DEAR(r11) /* SRR0 as DEAR */
- prepare_transfer_to_handler
- bl do_page_fault
- b interrupt_return
-
-/* 0x0500 - External Interrupt Exception */
- EXCEPTION(0x0500, HardwareInterrupt, do_IRQ)
-
-/* 0x0600 - Alignment Exception */
- START_EXCEPTION(0x0600, Alignment)
- EXCEPTION_PROLOG 0x600 Alignment handle_dar_dsisr=1
- prepare_transfer_to_handler
- bl alignment_exception
- REST_NVGPRS(r1)
- b interrupt_return
-
-/* 0x0700 - Program Exception */
- START_EXCEPTION(0x0700, ProgramCheck)
- EXCEPTION_PROLOG 0x700 ProgramCheck handle_dar_dsisr=1
- prepare_transfer_to_handler
- bl program_check_exception
- REST_NVGPRS(r1)
- b interrupt_return
-
- EXCEPTION(0x0800, Trap_08, unknown_exception)
- EXCEPTION(0x0900, Trap_09, unknown_exception)
- EXCEPTION(0x0A00, Trap_0A, unknown_exception)
- EXCEPTION(0x0B00, Trap_0B, unknown_exception)
-
-/* 0x0C00 - System Call Exception */
- START_EXCEPTION(0x0C00, SystemCall)
- SYSCALL_ENTRY 0xc00
-/* Trap_0D is commented out to get more space for system call exception */
-
-/* EXCEPTION(0x0D00, Trap_0D, unknown_exception) */
- EXCEPTION(0x0E00, Trap_0E, unknown_exception)
- EXCEPTION(0x0F00, Trap_0F, unknown_exception)
-
-/* 0x1000 - Programmable Interval Timer (PIT) Exception */
- START_EXCEPTION(0x1000, DecrementerTrap)
- b Decrementer
-
-/* 0x1010 - Fixed Interval Timer (FIT) Exception */
- START_EXCEPTION(0x1010, FITExceptionTrap)
- b FITException
-
-/* 0x1020 - Watchdog Timer (WDT) Exception */
- START_EXCEPTION(0x1020, WDTExceptionTrap)
- b WDTException
-
-/* 0x1100 - Data TLB Miss Exception
- * As the name implies, translation is not in the MMU, so search the
- * page tables and fix it. The only purpose of this function is to
- * load TLB entries from the page table if they exist.
- */
- START_EXCEPTION(0x1100, DTLBMiss)
- mtspr SPRN_SPRG_SCRATCH5, r10 /* Save some working registers */
- mtspr SPRN_SPRG_SCRATCH6, r11
- mtspr SPRN_SPRG_SCRATCH3, r12
- mtspr SPRN_SPRG_SCRATCH4, r9
- mfcr r12
- mfspr r9, SPRN_PID
- rlwimi r12, r9, 0, 0xff
- mfspr r10, SPRN_DEAR /* Get faulting address */
-
- /* If we are faulting a kernel address, we have to use the
- * kernel page tables.
- */
- lis r11, PAGE_OFFSET@h
- cmplw r10, r11
- blt+ 3f
- lis r11, swapper_pg_dir@h
- ori r11, r11, swapper_pg_dir@l
- li r9, 0
- mtspr SPRN_PID, r9 /* TLB will have 0 TID */
- b 4f
-
- /* Get the PGD for the current thread.
- */
-3:
- mfspr r11,SPRN_SPRG_THREAD
- lwz r11,PGDIR(r11)
-#ifdef CONFIG_PPC_KUAP
- rlwinm. r9, r9, 0, 0xff
- beq 5f /* Kuap fault */
-#endif
-4:
- tophys(r11, r11)
- rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */
- lwz r11, 0(r11) /* Get L1 entry */
- andi. r9, r11, _PMD_PRESENT /* Check if it points to a PTE page */
- beq 2f /* Bail if no table */
-
- rlwimi r11, r10, 22, 20, 29 /* Compute PTE address */
- lwz r11, 0(r11) /* Get Linux PTE */
- li r9, _PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_READ
- andc. r9, r9, r11 /* Check permission */
- bne 5f
-
- rlwinm r9, r11, 1, _PAGE_WRITE /* dirty => w */
- and r9, r9, r11 /* hwwrite = dirty & w */
- rlwimi r11, r9, 0, _PAGE_WRITE /* replace w by hwwrite */
-
- /* Create TLB tag. This is the faulting address plus a static
- * set of bits. These are size, valid, E, U0.
- */
- li r9, 0x00c0
- rlwimi r10, r9, 0, 20, 31
-
- b finish_tlb_load
-
-2: /* Check for possible large-page pmd entry */
- rlwinm. r9, r11, 2, 22, 24
- beq 5f
-
- /* Create TLB tag. This is the faulting address, plus a static
- * set of bits (valid, E, U0) plus the size from the PMD.
- */
- ori r9, r9, 0x40
- rlwimi r10, r9, 0, 20, 31
-
- b finish_tlb_load
-
-5:
- /* The bailout. Restore registers to pre-exception conditions
- * and call the heavyweights to help us out.
- */
- mtspr SPRN_PID, r12
- mtcrf 0x80, r12
- mfspr r9, SPRN_SPRG_SCRATCH4
- mfspr r12, SPRN_SPRG_SCRATCH3
- mfspr r11, SPRN_SPRG_SCRATCH6
- mfspr r10, SPRN_SPRG_SCRATCH5
- b DataStorage
-
-/* 0x1200 - Instruction TLB Miss Exception
- * Nearly the same as above, except we get our information from different
- * registers and bailout to a different point.
- */
- START_EXCEPTION(0x1200, ITLBMiss)
- mtspr SPRN_SPRG_SCRATCH5, r10 /* Save some working registers */
- mtspr SPRN_SPRG_SCRATCH6, r11
- mtspr SPRN_SPRG_SCRATCH3, r12
- mtspr SPRN_SPRG_SCRATCH4, r9
- mfcr r12
- mfspr r9, SPRN_PID
- rlwimi r12, r9, 0, 0xff
- mfspr r10, SPRN_SRR0 /* Get faulting address */
-
- /* If we are faulting a kernel address, we have to use the
- * kernel page tables.
- */
- lis r11, PAGE_OFFSET@h
- cmplw r10, r11
- blt+ 3f
- lis r11, swapper_pg_dir@h
- ori r11, r11, swapper_pg_dir@l
- li r9, 0
- mtspr SPRN_PID, r9 /* TLB will have 0 TID */
- b 4f
-
- /* Get the PGD for the current thread.
- */
-3:
- mfspr r11,SPRN_SPRG_THREAD
- lwz r11,PGDIR(r11)
-#ifdef CONFIG_PPC_KUAP
- rlwinm. r9, r9, 0, 0xff
- beq 5f /* Kuap fault */
-#endif
-4:
- tophys(r11, r11)
- rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */
- lwz r11, 0(r11) /* Get L1 entry */
- andi. r9, r11, _PMD_PRESENT /* Check if it points to a PTE page */
- beq 2f /* Bail if no table */
-
- rlwimi r11, r10, 22, 20, 29 /* Compute PTE address */
- lwz r11, 0(r11) /* Get Linux PTE */
- li r9, _PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
- andc. r9, r9, r11 /* Check permission */
- bne 5f
-
- rlwinm r9, r11, 1, _PAGE_WRITE /* dirty => w */
- and r9, r9, r11 /* hwwrite = dirty & w */
- rlwimi r11, r9, 0, _PAGE_WRITE /* replace w by hwwrite */
-
- /* Create TLB tag. This is the faulting address plus a static
- * set of bits. These are size, valid, E, U0.
- */
- li r9, 0x00c0
- rlwimi r10, r9, 0, 20, 31
-
- b finish_tlb_load
-
-2: /* Check for possible large-page pmd entry */
- rlwinm. r9, r11, 2, 22, 24
- beq 5f
-
- /* Create TLB tag. This is the faulting address, plus a static
- * set of bits (valid, E, U0) plus the size from the PMD.
- */
- ori r9, r9, 0x40
- rlwimi r10, r9, 0, 20, 31
-
- b finish_tlb_load
-
-5:
- /* The bailout. Restore registers to pre-exception conditions
- * and call the heavyweights to help us out.
- */
- mtspr SPRN_PID, r12
- mtcrf 0x80, r12
- mfspr r9, SPRN_SPRG_SCRATCH4
- mfspr r12, SPRN_SPRG_SCRATCH3
- mfspr r11, SPRN_SPRG_SCRATCH6
- mfspr r10, SPRN_SPRG_SCRATCH5
- b InstructionAccess
-
- EXCEPTION(0x1300, Trap_13, unknown_exception)
- EXCEPTION(0x1400, Trap_14, unknown_exception)
- EXCEPTION(0x1500, Trap_15, unknown_exception)
- EXCEPTION(0x1600, Trap_16, unknown_exception)
- EXCEPTION(0x1700, Trap_17, unknown_exception)
- EXCEPTION(0x1800, Trap_18, unknown_exception)
- EXCEPTION(0x1900, Trap_19, unknown_exception)
- EXCEPTION(0x1A00, Trap_1A, unknown_exception)
- EXCEPTION(0x1B00, Trap_1B, unknown_exception)
- EXCEPTION(0x1C00, Trap_1C, unknown_exception)
- EXCEPTION(0x1D00, Trap_1D, unknown_exception)
- EXCEPTION(0x1E00, Trap_1E, unknown_exception)
- EXCEPTION(0x1F00, Trap_1F, unknown_exception)
-
-/* Check for a single step debug exception while in an exception
- * handler before state has been saved. This is to catch the case
- * where an instruction that we are trying to single step causes
- * an exception (eg ITLB/DTLB miss) and thus the first instruction of
- * the exception handler generates a single step debug exception.
- *
- * If we get a debug trap on the first instruction of an exception handler,
- * we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is
- * a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR).
- * The exception handler was handling a non-critical interrupt, so it will
- * save (and later restore) the MSR via SPRN_SRR1, which will still have
- * the MSR_DE bit set.
- */
- /* 0x2000 - Debug Exception */
- START_EXCEPTION(0x2000, DebugTrap)
- CRITICAL_EXCEPTION_PROLOG 0x2000 DebugTrap
-
- /*
- * If this is a single step or branch-taken exception in an
- * exception entry sequence, it was probably meant to apply to
- * the code where the exception occurred (since exception entry
- * doesn't turn off DE automatically). We simulate the effect
- * of turning off DE on entry to an exception handler by turning
- * off DE in the SRR3 value and clearing the debug status.
- */
- mfspr r10,SPRN_DBSR /* check single-step/branch taken */
- andis. r10,r10,DBSR_IC@h
- beq+ 2f
-
- andi. r10,r9,MSR_IR|MSR_PR /* check supervisor + MMU off */
- beq 1f /* branch and fix it up */
-
- mfspr r10,SPRN_SRR2 /* Faulting instruction address */
- cmplwi r10,0x2100
- bgt+ 2f /* address above exception vectors */
-
- /* here it looks like we got an inappropriate debug exception. */
-1: rlwinm r9,r9,0,~MSR_DE /* clear DE in the SRR3 value */
- lis r10,DBSR_IC@h /* clear the IC event */
- mtspr SPRN_DBSR,r10
- /* restore state and get out */
- lwz r10,_CCR(r11)
- lwz r0,GPR0(r11)
- lwz r1,GPR1(r11)
- mtcrf 0x80,r10
- mtspr SPRN_SRR2,r12
- mtspr SPRN_SRR3,r9
- lwz r9,GPR9(r11)
- lwz r12,GPR12(r11)
- lwz r10,crit_r10@l(0)
- lwz r11,crit_r11@l(0)
- rfci
- b .
-
- /* continue normal handling for a critical exception... */
-2: mfspr r4,SPRN_DBSR
- stw r4,_ESR(r11) /* DebugException takes DBSR in _ESR */
- prepare_transfer_to_handler
- bl DebugException
- b ret_from_crit_exc
-
- /* Programmable Interval Timer (PIT) Exception. (from 0x1000) */
- __HEAD
-Decrementer:
- EXCEPTION_PROLOG 0x1000 Decrementer
- lis r0,TSR_PIS@h
- mtspr SPRN_TSR,r0 /* Clear the PIT exception */
- prepare_transfer_to_handler
- bl timer_interrupt
- b interrupt_return
-
- /* Fixed Interval Timer (FIT) Exception. (from 0x1010) */
- __HEAD
-FITException:
- EXCEPTION_PROLOG 0x1010 FITException
- prepare_transfer_to_handler
- bl unknown_exception
- b interrupt_return
-
- /* Watchdog Timer (WDT) Exception. (from 0x1020) */
- __HEAD
-WDTException:
- CRITICAL_EXCEPTION_PROLOG 0x1020 WDTException
- prepare_transfer_to_handler
- bl WatchdogException
- b ret_from_crit_exc
-
-/* Other PowerPC processors, namely those derived from the 6xx-series
- * have vectors from 0x2100 through 0x2F00 defined, but marked as reserved.
- * However, for the 4xx-series processors these are neither defined nor
- * reserved.
- */
-
- __HEAD
- /* Damn, I came up one instruction too many to fit into the
- * exception space :-). Both the instruction and data TLB
- * miss get to this point to load the TLB.
- * r10 - TLB_TAG value
- * r11 - Linux PTE
- * r9 - available to use
- * PID - loaded with proper value when we get here
- * Upon exit, we reload everything and RFI.
- * Actually, it will fit now, but oh well.....a common place
- * to load the TLB.
- */
-tlb_4xx_index:
- .long 0
-finish_tlb_load:
- /*
- * Clear out the software-only bits in the PTE to generate the
- * TLB_DATA value. These are the bottom 2 bits of the RPM, the
- * 4 bits of the zone field, and M.
- */
- li r9, 0x0cf2
- andc r11, r11, r9
- rlwimi r11, r10, 8, 24, 27 /* Copy 4 upper address bit into zone */
-
- /* load the next available TLB index. */
- lwz r9, tlb_4xx_index@l(0)
- addi r9, r9, 1
- andi. r9, r9, PPC40X_TLB_SIZE - 1
- stw r9, tlb_4xx_index@l(0)
-
- tlbwe r11, r9, TLB_DATA /* Load TLB LO */
- tlbwe r10, r9, TLB_TAG /* Load TLB HI */
-
- /* Done...restore registers and get out of here.
- */
- mtspr SPRN_PID, r12
- mtcrf 0x80, r12
- mfspr r9, SPRN_SPRG_SCRATCH4
- mfspr r12, SPRN_SPRG_SCRATCH3
- mfspr r11, SPRN_SPRG_SCRATCH6
- mfspr r10, SPRN_SPRG_SCRATCH5
- rfi /* Should sync shadow TLBs */
- b . /* prevent prefetch past rfi */
-
-/* This is where the main kernel code starts.
- */
-start_here:
-
- /* ptr to current */
- lis r2,init_task@h
- ori r2,r2,init_task@l
-
- /* ptr to phys current thread */
- tophys(r4,r2)
- addi r4,r4,THREAD /* init task's THREAD */
- mtspr SPRN_SPRG_THREAD,r4
-
- /* stack */
- lis r1,init_thread_union@ha
- addi r1,r1,init_thread_union@l
- li r0,0
- stwu r0,THREAD_SIZE-STACK_FRAME_MIN_SIZE(r1)
-
- bl early_init /* We have to do this with MMU on */
-
-/*
- * Decide what sort of machine this is and initialize the MMU.
- */
-#ifdef CONFIG_KASAN
- bl kasan_early_init
-#endif
- li r3,0
- mr r4,r31
- bl machine_init
- bl MMU_init
-
-/* Go back to running unmapped so we can load up new values
- * and change to using our exception vectors.
- * On the 4xx, all we have to do is invalidate the TLB to clear
- * the old 16M byte TLB mappings.
- */
- lis r4,2f@h
- ori r4,r4,2f@l
- tophys(r4,r4)
- lis r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@h
- ori r3,r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@l
- mtspr SPRN_SRR0,r4
- mtspr SPRN_SRR1,r3
- rfi
- b . /* prevent prefetch past rfi */
-
-/* Load up the kernel context */
-2:
- sync /* Flush to memory before changing TLB */
- tlbia
- isync /* Flush shadow TLBs */
-
- /* set up the PTE pointers for the Abatron bdiGDB.
- */
- lis r6, swapper_pg_dir@h
- ori r6, r6, swapper_pg_dir@l
- lis r5, abatron_pteptrs@h
- ori r5, r5, abatron_pteptrs@l
- stw r5, 0xf0(0) /* Must match your Abatron config file */
- tophys(r5,r5)
- stw r6, 0(r5)
-
-/* Now turn on the MMU for real! */
- lis r4,MSR_KERNEL@h
- ori r4,r4,MSR_KERNEL@l
- lis r3,start_kernel@h
- ori r3,r3,start_kernel@l
- mtspr SPRN_SRR0,r3
- mtspr SPRN_SRR1,r4
- rfi /* enable MMU and jump to start_kernel */
- b . /* prevent prefetch past rfi */
-
-/* Set up the initial MMU state so we can do the first level of
- * kernel initialization. This maps the first 32 MBytes of memory 1:1
- * virtual to physical and more importantly sets the cache mode.
- */
-SYM_FUNC_START_LOCAL(initial_mmu)
- tlbia /* Invalidate all TLB entries */
- isync
-
- /* We should still be executing code at physical address 0x0000xxxx
- * at this point. However, start_here is at virtual address
- * 0xC000xxxx. So, set up a TLB mapping to cover this once
- * translation is enabled.
- */
-
- lis r3,KERNELBASE@h /* Load the kernel virtual address */
- ori r3,r3,KERNELBASE@l
- tophys(r4,r3) /* Load the kernel physical address */
-
- iccci r0,r3 /* Invalidate the i-cache before use */
-
- /* Load the kernel PID.
- */
- li r0,0
- mtspr SPRN_PID,r0
- sync
-
- /* Configure and load one entry into TLB slots 63 */
- clrrwi r4,r4,10 /* Mask off the real page number */
- ori r4,r4,(TLB_WR | TLB_EX) /* Set the write and execute bits */
-
- clrrwi r3,r3,10 /* Mask off the effective page number */
- ori r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_16M))
-
- li r0,63 /* TLB slot 63 */
-
- tlbwe r4,r0,TLB_DATA /* Load the data portion of the entry */
- tlbwe r3,r0,TLB_TAG /* Load the tag portion of the entry */
-
- li r0,62 /* TLB slot 62 */
- addis r4,r4,SZ_16M@h
- addis r3,r3,SZ_16M@h
- tlbwe r4,r0,TLB_DATA /* Load the data portion of the entry */
- tlbwe r3,r0,TLB_TAG /* Load the tag portion of the entry */
-
- isync
-
- /* Establish the exception vector base
- */
- lis r4,KERNELBASE@h /* EVPR only uses the high 16-bits */
- tophys(r0,r4) /* Use the physical address */
- mtspr SPRN_EVPR,r0
-
- blr
-SYM_FUNC_END(initial_mmu)
-
-_GLOBAL(abort)
- mfspr r13,SPRN_DBCR0
- oris r13,r13,DBCR0_RST_SYSTEM@h
- mtspr SPRN_DBCR0,r13
diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h
index b6b5b01a173c..0b5c1993809e 100644
--- a/arch/powerpc/kernel/head_booke.h
+++ b/arch/powerpc/kernel/head_booke.h
@@ -145,10 +145,9 @@ ALT_FTR_SECTION_END_IFSET(CPU_FTR_EMB_HV)
b transfer_to_syscall /* jump to handler */
.endm
-/* To handle the additional exception priority levels on 40x and Book-E
+/* To handle the additional exception priority levels on Book-E
* processors we allocate a stack per additional priority level.
*
- * On 40x critical is the only additional level
* On 44x/e500 we have critical and machine check
*
* Additionally we reserve a SPRG for each priority level so we can free up a
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 2eabb15687a6..033cd00aa0fc 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -176,46 +176,6 @@ _GLOBAL(low_choose_7447a_dfs)
#endif /* CONFIG_CPU_FREQ_PMAC && CONFIG_PPC_BOOK3S_32 */
-#ifdef CONFIG_40x
-
-/*
- * Do an IO access in real mode
- */
-_GLOBAL(real_readb)
- mfmsr r7
- rlwinm r0,r7,0,~MSR_DR
- sync
- mtmsr r0
- sync
- isync
- lbz r3,0(r3)
- sync
- mtmsr r7
- sync
- isync
- blr
-_ASM_NOKPROBE_SYMBOL(real_readb)
-
- /*
- * Do an IO access in real mode
- */
-_GLOBAL(real_writeb)
- mfmsr r7
- rlwinm r0,r7,0,~MSR_DR
- sync
- mtmsr r0
- sync
- isync
- stb r3,0(r4)
- sync
- mtmsr r7
- sync
- isync
- blr
-_ASM_NOKPROBE_SYMBOL(real_writeb)
-
-#endif /* CONFIG_40x */
-
/*
* Copy a whole page. We use the dcbz instruction on the destination
* to reduce memory traffic (it eliminates the unnecessary reads of
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index f23430adb68a..28d6472c380a 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -2244,7 +2244,7 @@ void __noreturn unrecoverable_exception(struct pt_regs *regs)
;
}
-#if defined(CONFIG_BOOKE_WDT) || defined(CONFIG_40x)
+#ifdef CONFIG_BOOKE_WDT
DEFINE_INTERRUPT_HANDLER_NMI(WatchdogException)
{
printk (KERN_EMERG "PowerPC Book-E Watchdog Exception\n");
diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c
index 92b3fc258d11..4b99208f5adc 100644
--- a/arch/powerpc/kernel/udbg.c
+++ b/arch/powerpc/kernel/udbg.c
@@ -49,9 +49,6 @@ void __init udbg_early_init(void)
#elif defined(CONFIG_PPC_EARLY_DEBUG_44x)
/* PPC44x debug */
udbg_init_44x_as1();
-#elif defined(CONFIG_PPC_EARLY_DEBUG_40x)
- /* PPC40x debug */
- udbg_init_40x_realmode();
#elif defined(CONFIG_PPC_EARLY_DEBUG_CPM)
udbg_init_cpm();
#elif defined(CONFIG_PPC_EARLY_DEBUG_USBGECKO)
diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c
index a0467e528b70..313802aff571 100644
--- a/arch/powerpc/kernel/udbg_16550.c
+++ b/arch/powerpc/kernel/udbg_16550.c
@@ -274,29 +274,6 @@ void __init udbg_init_44x_as1(void)
#endif /* CONFIG_PPC_EARLY_DEBUG_44x */
-#ifdef CONFIG_PPC_EARLY_DEBUG_40x
-
-static u8 udbg_uart_in_40x(unsigned int reg)
-{
- return real_readb((void __iomem *)CONFIG_PPC_EARLY_DEBUG_40x_PHYSADDR
- + reg);
-}
-
-static void udbg_uart_out_40x(unsigned int reg, u8 val)
-{
- real_writeb(val, (void __iomem *)CONFIG_PPC_EARLY_DEBUG_40x_PHYSADDR
- + reg);
-}
-
-void __init udbg_init_40x_realmode(void)
-{
- udbg_uart_in = udbg_uart_in_40x;
- udbg_uart_out = udbg_uart_out_40x;
- udbg_use_uart();
-}
-
-#endif /* CONFIG_PPC_EARLY_DEBUG_40x */
-
#ifdef CONFIG_PPC_EARLY_DEBUG_16550
static void __iomem *udbg_uart_early_addr;
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index 6949c2c937e7..b2d1eea09761 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -20,9 +20,9 @@
#include <asm/trace.h>
/*
- * On 40x and 8xx, we directly inline tlbia and tlbivax
+ * On 8xx, we directly inline tlbia
*/
-#if defined(CONFIG_40x) || defined(CONFIG_PPC_8xx)
+#ifdef CONFIG_PPC_8xx
static inline void _tlbil_all(void)
{
asm volatile ("sync; tlbia; isync" : : : "memory");
@@ -35,7 +35,7 @@ static inline void _tlbil_pid(unsigned int pid)
}
#define _tlbil_pid_noind(pid) _tlbil_pid(pid)
-#else /* CONFIG_40x || CONFIG_PPC_8xx */
+#else /* CONFIG_PPC_8xx */
extern void _tlbil_all(void);
extern void _tlbil_pid(unsigned int pid);
#ifdef CONFIG_PPC_BOOK3E_64
@@ -43,7 +43,7 @@ extern void _tlbil_pid_noind(unsigned int pid);
#else
#define _tlbil_pid_noind(pid) _tlbil_pid(pid)
#endif
-#endif /* !(CONFIG_40x || CONFIG_PPC_8xx) */
+#endif /* !CONFIG_PPC_8xx */
/*
* On 8xx, we directly inline tlbie, on others, it's extern
diff --git a/arch/powerpc/mm/nohash/40x.c b/arch/powerpc/mm/nohash/40x.c
deleted file mode 100644
index e835e80c09db..000000000000
--- a/arch/powerpc/mm/nohash/40x.c
+++ /dev/null
@@ -1,161 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * This file contains the routines for initializing the MMU
- * on the 4xx series of chips.
- * -- paulus
- *
- * Derived from arch/ppc/mm/init.c:
- * Copyright (C) 1995-1996 Gary Thomas (gdt@...uxppc.org)
- *
- * Modifications by Paul Mackerras (PowerMac) (paulus@...anu.edu.au)
- * and Cort Dougan (PReP) (cort@...nmt.edu)
- * Copyright (C) 1996 Paul Mackerras
- *
- * Derived from "arch/i386/mm/init.c"
- * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
- */
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/stddef.h>
-#include <linux/vmalloc.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/highmem.h>
-#include <linux/memblock.h>
-
-#include <asm/io.h>
-#include <asm/mmu_context.h>
-#include <asm/mmu.h>
-#include <linux/uaccess.h>
-#include <asm/smp.h>
-#include <asm/bootx.h>
-#include <asm/machdep.h>
-#include <asm/setup.h>
-
-#include <mm/mmu_decl.h>
-
-/*
- * MMU_init_hw does the chip-specific initialization of the MMU hardware.
- */
-void __init MMU_init_hw(void)
-{
- int i;
- unsigned long zpr;
-
- /*
- * The Zone Protection Register (ZPR) defines how protection will
- * be applied to every page which is a member of a given zone.
- * The zone index bits (of ZSEL) in the PTE are used for software
- * indicators. We use the 4 upper bits of virtual address to select
- * the zone. We set all zones above TASK_SIZE to zero, allowing
- * only kernel access as indicated in the PTE. For zones below
- * TASK_SIZE, we set a 01 binary (a value of 10 will not work)
- * to allow user access as indicated in the PTE. This also allows
- * kernel access as indicated in the PTE.
- */
-
- for (i = 0, zpr = 0; i < TASK_SIZE >> 28; i++)
- zpr |= 1 << (30 - i * 2);
-
- mtspr(SPRN_ZPR, zpr);
-
- flush_instruction_cache();
-
- /*
- * Set up the real-mode cache parameters for the exception vector
- * handlers (which are run in real-mode).
- */
-
- mtspr(SPRN_DCWR, 0x00000000); /* All caching is write-back */
-
- /*
- * Cache instruction and data space where the exception
- * vectors and the kernel live in real-mode.
- */
-
- mtspr(SPRN_DCCR, 0xFFFF0000); /* 2GByte of data space at 0x0. */
- mtspr(SPRN_ICCR, 0xFFFF0000); /* 2GByte of instr. space at 0x0. */
-}
-
-#define LARGE_PAGE_SIZE_16M (1<<24)
-#define LARGE_PAGE_SIZE_4M (1<<22)
-
-unsigned long __init mmu_mapin_ram(unsigned long base, unsigned long top)
-{
- unsigned long v, s, mapped;
- phys_addr_t p;
-
- v = KERNELBASE;
- p = 0;
- s = total_lowmem;
-
- if (IS_ENABLED(CONFIG_KFENCE))
- return 0;
-
- if (debug_pagealloc_enabled())
- return 0;
-
- if (strict_kernel_rwx_enabled())
- return 0;
-
- while (s >= LARGE_PAGE_SIZE_16M) {
- pmd_t *pmdp;
- unsigned long val = p | _PMD_SIZE_16M | _PAGE_EXEC | _PAGE_RW;
-
- pmdp = pmd_off_k(v);
- *pmdp++ = __pmd(val);
- *pmdp++ = __pmd(val);
- *pmdp++ = __pmd(val);
- *pmdp++ = __pmd(val);
-
- v += LARGE_PAGE_SIZE_16M;
- p += LARGE_PAGE_SIZE_16M;
- s -= LARGE_PAGE_SIZE_16M;
- }
-
- while (s >= LARGE_PAGE_SIZE_4M) {
- pmd_t *pmdp;
- unsigned long val = p | _PMD_SIZE_4M | _PAGE_EXEC | _PAGE_RW;
-
- pmdp = pmd_off_k(v);
- *pmdp = __pmd(val);
-
- v += LARGE_PAGE_SIZE_4M;
- p += LARGE_PAGE_SIZE_4M;
- s -= LARGE_PAGE_SIZE_4M;
- }
-
- mapped = total_lowmem - s;
-
- /* If the size of RAM is not an exact power of two, we may not
- * have covered RAM in its entirety with 16 and 4 MiB
- * pages. Consequently, restrict the top end of RAM currently
- * allocable so that calls to the MEMBLOCK to allocate PTEs for "tail"
- * coverage with normal-sized pages (or other reasons) do not
- * attempt to allocate outside the allowed range.
- */
- memblock_set_current_limit(mapped);
-
- return mapped;
-}
-
-void setup_initial_memory_limit(phys_addr_t first_memblock_base,
- phys_addr_t first_memblock_size)
-{
- /* We don't currently support the first MEMBLOCK not mapping 0
- * physical on those processors
- */
- BUG_ON(first_memblock_base != 0);
-
- /* 40x can only access 16MB at the moment (see head_40x.S) */
- memblock_set_current_limit(min_t(u64, first_memblock_size, 0x00800000));
-}
diff --git a/arch/powerpc/mm/nohash/Makefile b/arch/powerpc/mm/nohash/Makefile
index f3894e79d5f7..643038eafc41 100644
--- a/arch/powerpc/mm/nohash/Makefile
+++ b/arch/powerpc/mm/nohash/Makefile
@@ -4,7 +4,6 @@ ccflags-$(CONFIG_PPC64) := $(NO_MINIMAL_TOC)
obj-y += mmu_context.o tlb.o tlb_low.o kup.o
obj-$(CONFIG_PPC_BOOK3E_64) += tlb_low_64e.o book3e_pgtable.o
-obj-$(CONFIG_40x) += 40x.o
obj-$(CONFIG_44x) += 44x.o
obj-$(CONFIG_PPC_8xx) += 8xx.o
obj-$(CONFIG_PPC_E500) += e500.o
diff --git a/arch/powerpc/mm/nohash/kup.c b/arch/powerpc/mm/nohash/kup.c
index e1f7de2e54ec..c20c4f357fbf 100644
--- a/arch/powerpc/mm/nohash/kup.c
+++ b/arch/powerpc/mm/nohash/kup.c
@@ -15,8 +15,6 @@
void setup_kuap(bool disabled)
{
if (disabled) {
- if (IS_ENABLED(CONFIG_40x))
- disable_kuep = true;
if (smp_processor_id() == boot_cpuid)
cur_cpu_spec->mmu_features &= ~MMU_FTR_KUAP;
return;
diff --git a/arch/powerpc/mm/nohash/mmu_context.c b/arch/powerpc/mm/nohash/mmu_context.c
index ccd5819b1bd9..92dc028aff1f 100644
--- a/arch/powerpc/mm/nohash/mmu_context.c
+++ b/arch/powerpc/mm/nohash/mmu_context.c
@@ -219,9 +219,6 @@ static void set_context(unsigned long id, pgd_t *pgd)
/* sync */
mb();
} else if (kuap_is_disabled()) {
- if (IS_ENABLED(CONFIG_40x))
- mb(); /* sync */
-
mtspr(SPRN_PID, id);
isync();
}
diff --git a/arch/powerpc/mm/nohash/tlb_low.S b/arch/powerpc/mm/nohash/tlb_low.S
index e1199608ff4d..c4d296e73731 100644
--- a/arch/powerpc/mm/nohash/tlb_low.S
+++ b/arch/powerpc/mm/nohash/tlb_low.S
@@ -32,32 +32,7 @@
#include <asm/asm-compat.h>
#include <asm/feature-fixups.h>
-#if defined(CONFIG_40x)
-
-/*
- * 40x implementation needs only tlbil_va
- */
-_GLOBAL(__tlbil_va)
- /* We run the search with interrupts disabled because we have to change
- * the PID and I don't want to preempt when that happens.
- */
- mfmsr r5
- mfspr r6,SPRN_PID
- wrteei 0
- mtspr SPRN_PID,r4
- tlbsx. r3, 0, r3
- mtspr SPRN_PID,r6
- wrtee r5
- bne 1f
- sync
- /* There are only 64 TLB entries, so r3 < 64, which means bit 25 is
- * clear. Since 25 is the V bit in the TLB_TAG, loading this value
- * will invalidate the TLB entry. */
- tlbwe r3, r3, TLB_TAG
- isync
-1: blr
-
-#elif defined(CONFIG_PPC_8xx)
+#if defined(CONFIG_PPC_8xx)
/*
* Nothing to do for 8xx, everything is inline
diff --git a/arch/powerpc/platforms/4xx/pci.c b/arch/powerpc/platforms/4xx/pci.c
index 48626615b18b..db6d33ca753f 100644
--- a/arch/powerpc/platforms/4xx/pci.c
+++ b/arch/powerpc/platforms/4xx/pci.c
@@ -1263,102 +1263,6 @@ static struct ppc4xx_pciex_hwops ppc460sx_pcie_hwops __initdata = {
#endif /* CONFIG_44x */
-#ifdef CONFIG_40x
-
-static int __init ppc405ex_pciex_core_init(struct device_node *np)
-{
- /* Nothing to do, return 2 ports */
- return 2;
-}
-
-static void __init ppc405ex_pcie_phy_reset(struct ppc4xx_pciex_port *port)
-{
- /* Assert the PE0_PHY reset */
- mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x01010000);
- msleep(1);
-
- /* deassert the PE0_hotreset */
- if (port->endpoint)
- mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x01111000);
- else
- mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x01101000);
-
- /* poll for phy !reset */
- /* XXX FIXME add timeout */
- while (!(mfdcri(SDR0, port->sdr_base + PESDRn_405EX_PHYSTA) & 0x00001000))
- ;
-
- /* deassert the PE0_gpl_utl_reset */
- mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x00101000);
-}
-
-static int __init ppc405ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
-{
- u32 val;
-
- if (port->endpoint)
- val = PTYPE_LEGACY_ENDPOINT;
- else
- val = PTYPE_ROOT_PORT;
-
- mtdcri(SDR0, port->sdr_base + PESDRn_DLPSET,
- 1 << 24 | val << 20 | LNKW_X1 << 12);
-
- mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET1, 0x00000000);
- mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET2, 0x01010000);
- mtdcri(SDR0, port->sdr_base + PESDRn_405EX_PHYSET1, 0x720F0000);
- mtdcri(SDR0, port->sdr_base + PESDRn_405EX_PHYSET2, 0x70600003);
-
- /*
- * Only reset the PHY when no link is currently established.
- * This is for the Atheros PCIe board which has problems to establish
- * the link (again) after this PHY reset. All other currently tested
- * PCIe boards don't show this problem.
- * This has to be re-tested and fixed in a later release!
- */
- val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
- if (!(val & 0x00001000))
- ppc405ex_pcie_phy_reset(port);
-
- dcr_write(port->dcrs, DCRO_PEGPL_CFG, 0x10000000); /* guarded on */
-
- port->has_ibpre = 1;
-
- return ppc4xx_pciex_port_reset_sdr(port);
-}
-
-static int ppc405ex_pciex_init_utl(struct ppc4xx_pciex_port *port)
-{
- dcr_write(port->dcrs, DCRO_PEGPL_SPECIAL, 0x0);
-
- /*
- * Set buffer allocations and then assert VRB and TXE.
- */
- out_be32(port->utl_base + PEUTL_OUTTR, 0x02000000);
- out_be32(port->utl_base + PEUTL_INTR, 0x02000000);
- out_be32(port->utl_base + PEUTL_OPDBSZ, 0x04000000);
- out_be32(port->utl_base + PEUTL_PBBSZ, 0x21000000);
- out_be32(port->utl_base + PEUTL_IPHBSZ, 0x02000000);
- out_be32(port->utl_base + PEUTL_IPDBSZ, 0x04000000);
- out_be32(port->utl_base + PEUTL_RCIRQEN, 0x00f00000);
- out_be32(port->utl_base + PEUTL_PCTL, 0x80800066);
-
- out_be32(port->utl_base + PEUTL_PBCTL, 0x08000000);
-
- return 0;
-}
-
-static struct ppc4xx_pciex_hwops ppc405ex_pcie_hwops __initdata =
-{
- .want_sdr = true,
- .core_init = ppc405ex_pciex_core_init,
- .port_init_hw = ppc405ex_pciex_init_port_hw,
- .setup_utl = ppc405ex_pciex_init_utl,
- .check_link = ppc4xx_pciex_check_link_sdr,
-};
-
-#endif /* CONFIG_40x */
-
#ifdef CONFIG_476FPE
static int __init ppc_476fpe_pciex_core_init(struct device_node *np)
{
@@ -1427,10 +1331,6 @@ static int __init ppc4xx_pciex_check_core_init(struct device_node *np)
if (of_device_is_compatible(np, "ibm,plb-pciex-apm821xx"))
ppc4xx_pciex_hwops = &apm821xx_pcie_hwops;
#endif /* CONFIG_44x */
-#ifdef CONFIG_40x
- if (of_device_is_compatible(np, "ibm,plb-pciex-405ex"))
- ppc4xx_pciex_hwops = &ppc405ex_pcie_hwops;
-#endif
#ifdef CONFIG_476FPE
if (of_device_is_compatible(np, "ibm,plb-pciex-476fpe")
|| of_device_is_compatible(np, "ibm,plb-pciex-476gtr"))
diff --git a/scripts/head-object-list.txt b/scripts/head-object-list.txt
index 890f69005bab..fd5d00bac447 100644
--- a/scripts/head-object-list.txt
+++ b/scripts/head-object-list.txt
@@ -27,7 +27,6 @@ arch/mips/kernel/head.o
arch/nios2/kernel/head.o
arch/openrisc/kernel/head.o
arch/parisc/kernel/head.o
-arch/powerpc/kernel/head_40x.o
arch/powerpc/kernel/head_44x.o
arch/powerpc/kernel/head_64.o
arch/powerpc/kernel/head_8xx.o
--
2.45.0
Powered by blists - more mailing lists