linux-kernel - [PATCH v2] spi: omap2-mcspi: Ensure that CS is correctly asserted when switching from MULTI mode to SINGLE mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240506-fix-omap2-mcspi-v2-1-d9c77ba8b9c7@bootlin.com>
Date: Mon, 06 May 2024 16:27:59 +0200
From: Louis Chauvet <louis.chauvet@...tlin.com>
To: Mark Brown <broonie@...nel.org>
Cc: linux-spi@...r.kernel.org, linux-kernel@...r.kernel.org, 
 miquel.raynal@...tlin.com, thomas.petazzoni@...tlin.com, 
 yen-mei.goh@...sight.com, jeremie.dautheribes@...tlin.com, 
 Louis Chauvet <louis.chauvet@...tlin.com>
Subject: [PATCH v2] spi: omap2-mcspi: Ensure that CS is correctly asserted
 when switching from MULTI mode to SINGLE mode

The OMAP2 support features a "multi" mode, where the controller
automatically sets the Chip Select (CS) when necessary. This mode allows
for shorter delays between CS selection and word content, but the CS is
always deasserted at the end.

The default transfer_one_message function expects the last transfer of a
message to keep the CS enabled. However, when two consecutive messages
use "multi" mode followed by "single" mode, the chipselect is not enabled
during the second message. This discrepancy causes the driver to time
out.

To address this issue, the CS is now reasserted for each new message that
follows a "multi"-mode message. This change ensures proper CS handling
and prevents driver timeouts.

Fixes: d153ff4056cb ("spi: omap2-mcspi: Add support for MULTI-mode")

Signed-off-by: Louis Chauvet <louis.chauvet@...tlin.com>
---
Changes in v2:
- Fix build error, I used the old API (master instead of controller)
- Link to v1: https://lore.kernel.org/r/20240409-fix-omap2-mcspi-v1-1-f2b881ae196d@bootlin.com
---
 drivers/spi/spi-omap2-mcspi.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index 7e3083b83534..dd514a7504ec 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -1264,6 +1264,15 @@ static int omap2_mcspi_prepare_message(struct spi_controller *ctlr,
 	struct spi_transfer	*tr;
 	u8 bits_per_word;
 
+	/*
+	 * When the last transfer used multi-mode, the CS is not keep down by the controller.
+	 * The default transfer_one_message expect that the last transfer of a message keep the CS
+	 * active.
+	 * Ensure that the next call to spi_set_cs will work as expected if single-mode is used.
+	 */
+	if (mcspi->use_multi_mode)
+		ctlr->last_cs[0] = -1;
+
 	/*
 	 * The conditions are strict, it is mandatory to check each transfer of the list to see if
 	 * multi-mode is applicable.

---
base-commit: dfca7eb7615116b696ecdc85417c9e2df0b546dc
change-id: 20240408-fix-omap2-mcspi-a6b41142ad9a

Best regards,
-- 
Louis Chauvet <louis.chauvet@...tlin.com>