linux-kernel - [PATCH 2/5] phy: exynos5-usbdrd: convert udelay() to fsleep()

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240507-samsung-usb-phy-fixes-v1-2-4ccba5afa7cc@linaro.org>
Date: Tue, 07 May 2024 15:14:45 +0100
From: André Draszik <andre.draszik@...aro.org>
To: Vinod Koul <vkoul@...nel.org>, 
 Kishon Vijay Abraham I <kishon@...nel.org>, 
 Krzysztof Kozlowski <krzk@...nel.org>, 
 Alim Akhtar <alim.akhtar@...sung.com>, 
 Sam Protsenko <semen.protsenko@...aro.org>
Cc: Peter Griffin <peter.griffin@...aro.org>, 
 Tudor Ambarus <tudor.ambarus@...aro.org>, 
 Will McVicker <willmcvicker@...gle.com>, kernel-team@...roid.com, 
 linux-phy@...ts.infradead.org, linux-arm-kernel@...ts.infradead.org, 
 linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org, 
 Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>, 
 André Draszik <andre.draszik@...aro.org>
Subject: [PATCH 2/5] phy: exynos5-usbdrd: convert udelay() to fsleep()

The timers-howto recommends using usleep_range() and friends anytime
waiting for >= ~10us is required. Doing so can help the timer subsystem
a lot to coalesce wakeups.

Additionally, fsleep() exists as a convenient wrapper so we do not have
to think about which exact sleeping function is required in which case.

Convert all udelay() calls in this driver to use fsleep() to follow the
recommendataion.

Signed-off-by: André Draszik <andre.draszik@...aro.org>
---
 drivers/phy/samsung/phy-exynos5-usbdrd.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c
index 2af192c15d78..1b209ab7a268 100644
--- a/drivers/phy/samsung/phy-exynos5-usbdrd.c
+++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c
@@ -448,7 +448,7 @@ static int exynos5_usbdrd_phy_init(struct phy *phy)
 
 	writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST);
 
-	udelay(10);
+	fsleep(10);
 
 	reg &= ~PHYCLKRST_PORTRESET;
 	writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST);
@@ -779,11 +779,11 @@ static void exynos850_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd)
 	writel(reg, regs_base + EXYNOS850_DRD_HSP_TEST);
 
 	/* Finish PHY reset (POR=low) */
-	udelay(10); /* required before doing POR=low */
+	fsleep(10); /* required before doing POR=low */
 	reg = readl(regs_base + EXYNOS850_DRD_CLKRST);
 	reg &= ~(CLKRST_PHY_SW_RST | CLKRST_PORT_RST);
 	writel(reg, regs_base + EXYNOS850_DRD_CLKRST);
-	udelay(75); /* required after POR=low for guaranteed PHY clock */
+	fsleep(75); /* required after POR=low for guaranteed PHY clock */
 
 	/* Disable single ended signal out */
 	reg = readl(regs_base + EXYNOS850_DRD_HSP);
@@ -836,7 +836,7 @@ static int exynos850_usbdrd_phy_exit(struct phy *phy)
 	reg = readl(regs_base + EXYNOS850_DRD_CLKRST);
 	reg |= CLKRST_LINK_SW_RST;
 	writel(reg, regs_base + EXYNOS850_DRD_CLKRST);
-	udelay(10); /* required before doing POR=low */
+	fsleep(10); /* required before doing POR=low */
 	reg &= ~CLKRST_LINK_SW_RST;
 	writel(reg, regs_base + EXYNOS850_DRD_CLKRST);
 

-- 
2.45.0.rc1.225.g2a3ae87e7f-goog