linux-kernel - Re: [PATCH v2 2/2] PCI: pciehp: Abort hot-plug if pci_hp_add

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240507142738.wyj19VVh@linutronix.de>
Date: Tue, 7 May 2024 16:27:38 +0200
From: Nam Cao <namcao@...utronix.de>
To: Lukas Wunner <lukas@...ner.de>
Cc: Bjorn Helgaas <bhelgaas@...gle.com>, Yinghai Lu <yinghai@...nel.org>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org,
	Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>,
	Mika Westerberg <mika.westerberg@...ux.intel.com>
Subject: Re: [PATCH v2 2/2] PCI: pciehp: Abort hot-plug if
 pci_hp_add_bridge() fails

On Mon, May 06, 2024 at 09:36:44PM +0200, Lukas Wunner wrote:
> On Mon, May 06, 2024 at 10:37:01AM +0200, Nam Cao wrote:
> > I just discovered a new crash scenario with shpchp:
> > 
> > First, hot-add a bridge:
> > (qemu) device_add pci-bridge,id=br2,bus=br1,chassis_nr=1,addr=1
> > 
> > But with the current patch, the hot-plug is still successful, just that the
> > bridge is not properly configured:
> > $ lspci -t
> > -[0000:00]-+-00.0
> >            +-01.0
> >            +-02.0
> >            +-03.0-[01-02]----00.0-[02]----01.0--  <-- new hot-added bridge
> >            +-1f.0
> >            +-1f.2
> >            \-1f.3
> > 
> > But! Now I leave the hot-added bridge as is, and hot-add an ethernet card:
> > (qemu) device_add e1000,bus=br1,id=eth0,addr=2
> > 
> > this command crashes the kernel (full crash log below).
> > 
> > The problem is because during hot-plugging of this ethernet card,
> > pci_bus_add_devices() is invoked and the previously hot-plugged bridge hasn't
> > been marked as "added" yet, so the driver attempts to add this bridge
> > again, leading to the crash.
> > 
> > Now for pciehp, this scenario cannot happen, because there is only a single
> > slot, so we cannot hot-plug another device. But still, this makes me think
> > perhaps we shouldn't leave the hot-plugged bridge in a improperly-configured
> > state as this patch is doing. I cannot think of a scenario that would crash pciehp
> > similarly to shpchp. But that's just me, maybe there is a rare scenario
> > that can crash pciehp, but I just haven't seen yet.
> > 
> > My point is: better safe than sorry. I propose going back to the original
> > solution: calling pci_stop_and_remove_bus_device() and return a negative
> > error, and get rid of this improperly configured bridge. It is useless
> > anyways without a subordinate bus number.
> > 
> > What do you think?
> 
> When the kernel runs out of BAR address space for devices downstream of
> a bridge, it doesn't de-enumerate the bridge.  The devices are just
> unusable.
> 
> So my first intuition is that running out of bus numbers shouldn't result
> in de-enumeration either.

The BAR case is a bit different: it is a legal configuration for a bridge
to have no address space downstream: we can configure the bridge with
limit<base to indicate that there is no downstream addresses. There is
nothing similar for secondary bus number: there is no legal bus number
configuration for the bridge in this case.

> Remind me, how exactly does the NULL pointer deref occur?  I think it's
> because no struct pci_bus was allocated for the subordinate bus of the
> hot-plugged bridge, right?  Because AFAICS that would happen in
> 
> pci_hp_add_bridge()
>   pci_can_bridge_extend()
>     pci_add_new_bus()
>       pci_alloc_child_bus()
> 
> but we never get that far because pci_hp_add_bridge() bails out with -1.
> So the subordinate pointer remains a NULL pointer.

This is correct. NULL deference happens due to subordinate pointer being
NULL.
 
> Perhaps we should allocate an empty struct pci_bus instead.

This feels a bit hacky. What bus number could we set to this struct? And I
doubt that the PCI subsystem is written with the expectation that struct pci_bus
can be a dummy one, so I would guess that the probability of breaking thing
is high with this approach.

> Or check for a NULL subordinate pointer instead of crashing.

I think this is a possible solution, but it is a bit complicated: all usage
of subordinate pointers will need to be looked at. Further more, secondary bus
number being zero is currently taken as unconfigured/invalid (for example
in pci_scan_bridge_extend()), that needs to be changed as well. Doing this
has a good chance of breaking things.
 
I don't really see the upside of the above, compared to just deleting this
bridge. It is not really counter-intuitive that the OS rejects a
hot-plugged device that cannot be configured, right? Also this solution is
wayyy simpler. Unless there is problem with this that I am not seeing?

Best regards,
Nam