linux-kernel - Re: [PATCH v4 3/3] arch: arm64: dts: sm8650-hdk: add support for the Display Card overlay

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <6d9879aa-ae84-4ed0-8b5f-5609fd0c37b9@linaro.org>
Date: Tue, 7 May 2024 16:18:46 +0200
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Neil Armstrong <neil.armstrong@...aro.org>,
 Bjorn Andersson <andersson@...nel.org>, Rob Herring <robh@...nel.org>,
 Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
 Conor Dooley <conor+dt@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
 linux-kernel@...r.kernel.org,
 Vladimir Zapolskiy <vladimir.zapolskiy@...aro.org>
Subject: Re: [PATCH v4 3/3] arch: arm64: dts: sm8650-hdk: add support for the
 Display Card overlay



On 4/22/24 10:48, Neil Armstrong wrote:
> With the SM8650-HDK, a Display Card kit can be connected to provide
> a VTDR6130 display with Goodix Berlin Touch controller.
> 
> In order to route the DSI lanes to the connector for the Display
> Card kit, a switch must be changed on the board.
> 
> The HDMI nodes are disabled since the DSI lanes are shared with
> the DSI to HDMI transceiver.
> 
> Add support for this card as an overlay and apply it it at
> build-time to the sm8650-hdk dtb.
> 
> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@...aro.org>
> Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@...aro.org>
> Signed-off-by: Neil Armstrong <neil.armstrong@...aro.org>
> ---

After testing this on real hardware and getting some word, it turns out
there's an issue with what seems like the SMMU ACL settings, preventing
the display bridge I2C controller from being accessed and ending up in
the board being unbootable, even without directly addressing the bridge.

Not mergable as-is.

Konrad