lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240507144821.12275-7-johan+linaro@kernel.org>
Date: Tue,  7 May 2024 16:48:20 +0200
From: Johan Hovold <johan+linaro@...nel.org>
To: Jiri Kosina <jikos@...nel.org>,
	Benjamin Tissoires <benjamin.tissoires@...hat.com>,
	Bjorn Andersson <andersson@...nel.org>
Cc: Dmitry Torokhov <dmitry.torokhov@...il.com>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Konrad Dybcio <konrad.dybcio@...aro.org>,
	Linus Walleij <linus.walleij@...aro.org>,
	Douglas Anderson <dianders@...omium.org>,
	linux-input@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-arm-msm@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	Johan Hovold <johan+linaro@...nel.org>
Subject: [PATCH v2 6/7] arm64: dts: qcom: sc8280xp-crd: use external pull up for touch reset

The touch controller reset line is currently not described by the
devicetree except in the pin configuration which is used to deassert
reset.

As the reset line has an external pull up to an always-on rail there is
no need to drive the pin high so just leave it configured as an input
and disable the internal pull down.

Signed-off-by: Johan Hovold <johan+linaro@...nel.org>
---
 arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index 41215567b3ae..372b35fb844f 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -977,8 +977,7 @@ int-n-pins {
 		reset-n-pins {
 			pins = "gpio99";
 			function = "gpio";
-			output-high;
-			drive-strength = <16>;
+			bias-disable;
 		};
 	};
 
-- 
2.43.2


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ