linux-kernel - [PATCH 1/2] dt-bindings: firmware: arm,scmi: Support notification completion channel

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240507-scmi-notify-v1-1-1fdefc984d53@nxp.com>
Date: Tue, 07 May 2024 23:35:00 +0800
From: "Peng Fan (OSS)" <peng.fan@....nxp.com>
To: Sudeep Holla <sudeep.holla@....com>, 
 Cristian Marussi <cristian.marussi@....com>, Rob Herring <robh@...nel.org>, 
 Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org, 
 linux-kernel@...r.kernel.org, Peng Fan <peng.fan@....com>
Subject: [PATCH 1/2] dt-bindings: firmware: arm,scmi: Support notification
 completion channel

From: Peng Fan <peng.fan@....com>

Per System Control Management Interface specification:
" Completion interrupts:This transport supports polling or interrupt driven
  modes of communication. In interrupt mode, when the callee completes
  processing a message, it raises an interrupt to the caller. Hardware
  support for completion interrupts is optional."
So add an optional mailbox channel for notification completion interrupts.

Signed-off-by: Peng Fan <peng.fan@....com>
---
 Documentation/devicetree/bindings/firmware/arm,scmi.yaml | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
index 7de2c29606e5..308af58180d1 100644
--- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
+++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
@@ -72,14 +72,17 @@ properties:
           - const: tx
           - const: tx_reply
           - const: rx
+          - const: rx_reply
         minItems: 2
 
   mboxes:
     description:
       List of phandle and mailbox channel specifiers. It should contain
-      exactly one, two or three mailboxes; the first one or two for transmitting
-      messages ("tx") and another optional ("rx") for receiving notifications
-      and delayed responses, if supported by the platform.
+      exactly one, two, three or four mailboxes; the first one or two for
+      transmitting messages ("tx") and another optional ("rx") for receiving
+      notifications and delayed responses, if supported by the platform.
+      The optional ("rx_reply") is for notifications completion interrupt,
+      if supported by the platform.
       The number of mailboxes needed for transmitting messages depends on the
       type of channels exposed by the specific underlying mailbox controller;
       one single channel descriptor is enough if such channel is bidirectional,
@@ -92,9 +95,10 @@ properties:
        2 mbox / 2 shmem => SCMI TX and RX over 2 mailbox bidirectional channels
        2 mbox / 1 shmem => SCMI TX over 2 mailbox unidirectional channels
        3 mbox / 2 shmem => SCMI TX and RX over 3 mailbox unidirectional channels
+       4 mbox / 2 shmem => SCMI TX and RX over 4 mailbox unidirectional channels
       Any other combination of mboxes and shmem is invalid.
     minItems: 1
-    maxItems: 3
+    maxItems: 4
 
   shmem:
     description:

-- 
2.37.1