linux-kernel - [PATCH v3] arm64: dts: qcom: qcs6490-rb3gen2: enable hdmi bridge

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date: Tue,  7 May 2024 22:00:45 +0530
From: Venkata Prahlad Valluru <quic_vvalluru@...cinc.com>
To: andersson@...nel.org
Cc: conor+dt@...nel.org, devicetree@...r.kernel.org, konrad.dybcio@...aro.org,
        krzysztof.kozlowski+dt@...aro.org, linux-arm-msm@...r.kernel.org,
        linux-kernel@...r.kernel.org, quic_abhinavk@...cinc.com,
        quic_nankam@...cinc.com, quic_vvalluru@...cinc.com, robh@...nel.org
Subject: [PATCH v3] arm64: dts: qcom: qcs6490-rb3gen2: enable hdmi bridge

Rb3Gen2 has a lt9611uxc DSI-to-HDMI bridge on i2c0, with
reset gpio from pm7250b gpio2 and irq gpio from tlmm gpio24.
Bridge supplies are Vdd connected to input supply directly
and vcc to L11c. Enable HDMI output, bridge and corresponding
DSI output.

Signed-off-by: Venkata Prahlad Valluru <quic_vvalluru@...cinc.com>
---
v3: - Updated commit text
    - Arranged nodes in alphabetical order
    - Fixed signoff
    - Fixed drive strength for lt9611_irq_pin
    - Removed 'label' from hdmi-connector, which is optional

v2: Addressed dtschema errors
	- Fixed lt9611-irq
	- vdd-supply error to be ignored, as it is connected to
	  input supply directly, on rb3gen2
---
 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 85 ++++++++++++++++++++
 1 file changed, 85 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
index a085ff5b5fb2..24b0b9525ea4 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -52,6 +52,17 @@
 		};
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&lt9611_out>;
+			};
+		};
+	};
+
 	reserved-memory {
 		xbl_mem: xbl@...00000 {
 			reg = <0x0 0x80700000 0x0 0x100000>;
@@ -530,6 +541,45 @@
 			   <GCC_WPSS_RSCP_CLK>;
 };
 
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	lt9611_codec: hdmi-bridge@2b {
+		compatible = "lontium,lt9611uxc";
+		reg = <0x2b>;
+
+		interrupts-extended = <&tlmm 24 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&pm7250b_gpios 2 GPIO_ACTIVE_HIGH>;
+
+		vcc-supply = <&vreg_l11c_2p8>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lt9611_irq_pin &lt9611_rst_pin>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lt9611_a: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				lt9611_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
 &i2c1 {
 	status = "okay";
 
@@ -587,6 +637,21 @@
 	remote-endpoint = <&usb_dp_qmpphy_dp_in>;
 };
 
+&mdss_dsi {
+	vdda-supply = <&vreg_l6b_1p2>;
+	status = "okay";
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&lt9611_a>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi_phy {
+	vdds-supply = <&vreg_l10c_0p88>;
+	status = "okay";
+};
+
 &mdss_edp {
 	status = "okay";
 };
@@ -711,3 +776,23 @@
 	function = "gpio";
 	bias-disable;
 };
+
+&pm7250b_gpios {
+	lt9611_rst_pin: lt9611-rst-state {
+		pins = "gpio2";
+		function = "normal";
+
+		output-high;
+		input-disable;
+		power-source = <0>;
+	};
+};
+
+&tlmm {
+	lt9611_irq_pin: lt9611-irq-state {
+		pins = "gpio24";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
-- 
2.17.1