lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240506-th1520-clk-v3-5-085a18a23a7f@tenstorrent.com>
Date: Mon, 06 May 2024 21:55:18 -0700
From: Drew Fustini <dfustini@...storrent.com>
To: Jisheng Zhang <jszhang@...nel.org>, Guo Ren <guoren@...nel.org>, 
 Fu Wei <wefu@...hat.com>, Yangtao Li <frank.li@...o.com>, 
 Thomas Bonnefille <thomas.bonnefille@...tlin.com>, 
 Emil Renner Berthing <emil.renner.berthing@...onical.com>, 
 Michael Turquette <mturquette@...libre.com>, 
 Stephen Boyd <sboyd@...nel.org>, Rob Herring <robh@...nel.org>, 
 Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>, 
 Paul Walmsley <paul.walmsley@...ive.com>, 
 Palmer Dabbelt <palmer@...belt.com>, Albert Ou <aou@...s.berkeley.edu>
Cc: linux-riscv@...ts.infradead.org, linux-clk@...r.kernel.org, 
 devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, 
 Drew Fustini <dfustini@...storrent.com>
Subject: [PATCH RFC v3 5/7] riscv: dts: thead: change TH1520 uart nodes to
 use clock controller

Change the clock property in TH1520 uart nodes to a clock provided by
AP_SUBSYS clock controller.

Signed-off-by: Drew Fustini <dfustini@...storrent.com>
---
 arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts |  4 ----
 .../boot/dts/thead/th1520-lichee-module-4a.dtsi    |  4 ----
 arch/riscv/boot/dts/thead/th1520.dtsi              | 24 +++++++++++-----------
 3 files changed, 12 insertions(+), 20 deletions(-)

diff --git a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
index d9b4de9e4757..164afd18b56c 100644
--- a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
+++ b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
@@ -52,10 +52,6 @@ &sdhci_clk {
 	clock-frequency = <198000000>;
 };
 
-&uart_sclk {
-	clock-frequency = <100000000>;
-};
-
 &dmac0 {
 	status = "okay";
 };
diff --git a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
index 1365d3a512a3..1b7ede570994 100644
--- a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
+++ b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
@@ -33,10 +33,6 @@ &sdhci_clk {
 	clock-frequency = <198000000>;
 };
 
-&uart_sclk {
-	clock-frequency = <100000000>;
-};
-
 &dmac0 {
 	status = "okay";
 };
diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
index e193f8d9ab8a..963c786f3c53 100644
--- a/arch/riscv/boot/dts/thead/th1520.dtsi
+++ b/arch/riscv/boot/dts/thead/th1520.dtsi
@@ -141,12 +141,6 @@ apb_clk: apb-clk-clock {
 		#clock-cells = <0>;
 	};
 
-	uart_sclk: uart-sclk-clock {
-		compatible = "fixed-clock";
-		clock-output-names = "uart_sclk";
-		#clock-cells = <0>;
-	};
-
 	sdhci_clk: sdhci-clock {
 		compatible = "fixed-clock";
 		clock-frequency = <198000000>;
@@ -196,7 +190,8 @@ uart0: serial@...7014000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0xff 0xe7014000 0x0 0x100>;
 			interrupts = <36 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&uart_sclk>;
+			clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART0_PCLK>;
+			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";
@@ -233,7 +228,8 @@ uart1: serial@...7f00000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0xff 0xe7f00000 0x0 0x100>;
 			interrupts = <37 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&uart_sclk>;
+			clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART1_PCLK>;
+			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";
@@ -243,7 +239,8 @@ uart3: serial@...7f04000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0xff 0xe7f04000 0x0 0x100>;
 			interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&uart_sclk>;
+			clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART3_PCLK>;
+			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";
@@ -325,7 +322,8 @@ uart2: serial@...c010000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0xff 0xec010000 0x0 0x4000>;
 			interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&uart_sclk>;
+			clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART2_PCLK>;
+			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";
@@ -387,7 +385,8 @@ uart4: serial@...7f08000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0xff 0xf7f08000 0x0 0x4000>;
 			interrupts = <40 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&uart_sclk>;
+			clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART4_PCLK>;
+			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";
@@ -397,7 +396,8 @@ uart5: serial@...7f0c000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0xff 0xf7f0c000 0x0 0x4000>;
 			interrupts = <41 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&uart_sclk>;
+			clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART5_PCLK>;
+			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";

-- 
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ