linux-kernel - Re: [PATCH v2 1/2] dt-bindings: arm: qcom: Update Devicetree identifiers

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Tue, 7 May 2024 10:37:06 +0530
From: Amrit Anand <quic_amrianan@...cinc.com>
To: Caleb Connolly <caleb.connolly@...aro.org>, <robh@...nel.org>,
        <krzysztof.kozlowski+dt@...aro.org>, <conor+dt@...nel.org>,
        <agross@...nel.org>, <andersson@...nel.org>,
        <konrad.dybcio@...aro.org>
CC: <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <linux-arm-msm@...r.kernel.org>, <kernel@...cinc.com>,
        <peter.griffin@...aro.org>, <linux-riscv@...ts.infradead.org>,
        <chrome-platform@...ts.linux.dev>,
        <linux-mediatek@...ts.infradead.org>
Subject: Re: [PATCH v2 1/2] dt-bindings: arm: qcom: Update Devicetree
 identifiers


On 3/14/2024 7:59 PM, Caleb Connolly wrote:
>
> On 14/03/2024 12:11, Amrit Anand wrote:
>> Update existing documentation for qcom,msm-id (interchangeably:
>> qcom,soc-id) and qcom,board-id. Add support for qcom,pmic-id, qcom,oem-id
>> to support multi-DTB selection on Qualcomm's boards.
>>
>> "qcom,soc-id", "qcom,board-id" and "qcom,pmic-id" are tuples of two 32-bit
>> values. The "qcom,oem-id" is a tuple of one 32-bit value.
>> Introduce macros to help generate SOC, board, PMIC and OEM identifiers.
>> QCOM_SOC_ID and QCOM_SOC_REVISION can be used to generate qcom,msm-id.
>> QCOM_BOARD_ID and QCOM_BOARD_SUBTYPE can be used to generate qcom,board-id.
>> QCOM_PMIC_SID and QCOM_PMIC_MODEL can be used to generate qcom,pmic-id.
>> QCOM_OEM_ID can be used to generate qcom,oem-id.
>>
>> Add entries for different types of SoC, boards, DDR type, Boot device
>> type which are currently used by Qualcomm based bootloader.
>>
>> Signed-off-by: Amrit Anand <quic_amrianan@...cinc.com>
>> ---
>>   include/dt-bindings/arm/qcom,ids.h | 86 ++++++++++++++++++++++++++++++++++----
>>   1 file changed, 77 insertions(+), 9 deletions(-)
>>
>> diff --git a/include/dt-bindings/arm/qcom,ids.h b/include/dt-bindings/arm/qcom,ids.h
>> index f724834..dc24151 100644
>> --- a/include/dt-bindings/arm/qcom,ids.h
>> +++ b/include/dt-bindings/arm/qcom,ids.h
>> @@ -8,9 +8,14 @@
>>   #define _DT_BINDINGS_ARM_QCOM_IDS_H
>>   
>>   /*
>> - * The MSM chipset and hardware revision used by Qualcomm bootloaders, DTS for
>> - * older chipsets (qcom,msm-id) and in socinfo driver:
>> + * The MSM chipset ID (soc-id) used by Qualcomm bootloaders,
>> + * and in socinfo driver:
>> + * where, "a" indicates Qualcomm supported chipsets, example MSM8260, MSM8660 etc
>>    */
>> +
>> +#define QCOM_SOC_ID(a)  ((QCOM_ID_##a) && 0xffff)
> How is QCOM_SOC_ID(SC7280) ever better than QCOM_ID_SC7280? What does
> this mask give you? It's going into a 32-bit field and not being OR'd
> with anything else...
Ok, understood. Seems better.
>> +
>> +
>>   #define QCOM_ID_MSM8260			70
>>   #define QCOM_ID_MSM8660			71
>>   #define QCOM_ID_APQ8060			86
>> @@ -266,16 +271,79 @@
>>   #define QCOM_ID_IPQ5302			595
>>   #define QCOM_ID_IPQ5300			624
>>   
>> + /* The SOC revision used by Qualcomm bootloaders (soc-revision) */
>> +
>> +#define QCOM_SOC_REVISION(a)		(a & 0xff)
>> +
>>   /*
>> - * The board type and revision information, used by Qualcomm bootloaders and
>> - * DTS for older chipsets (qcom,board-id):
>> + * The board type and revision information (board-id), used by Qualcomm bootloaders
>> + * where, "a" indicates board type which can be either MTP, QRD etc
>>    */
>> +
>>   #define QCOM_BOARD_ID(a, major, minor) \
>> -	(((major & 0xff) << 16) | ((minor & 0xff) << 8) | QCOM_BOARD_ID_##a)
>> +	(((major & 0xff) << 16) | ((minor & 0xff) << 8) | ((QCOM_BOARD_ID_##a) & 0xff))
>> +
>> +#define QCOM_BOARD_ID_MTP		0x8
>> +#define QCOM_BOARD_ID_LIQUID		0x9
>> +#define QCOM_BOARD_ID_DRAGONBOARD	0xA
>> +#define QCOM_BOARD_ID_QRD		0x11
> This replaces the previous definition of QCOM_BOARD_ID_QRD which was
> decimal 11, now you're defining it as hex 0x11? I'm guessing this was a
> typo.

Will correct it.

Thanks,
Amrit

>> +#define QCOM_BOARD_ID_ADP		0x19
>> +#define QCOM_BOARD_ID_HDK		0x1F
>> +#define QCOM_BOARD_ID_ATP		0x21
>> +#define QCOM_BOARD_ID_IDP		0x22
>> +#define QCOM_BOARD_ID_SBC		0x24
>> +#define QCOM_BOARD_ID_QXR		0x26
>> +#define QCOM_BOARD_ID_X100		0x26
>> +#define QCOM_BOARD_ID_CRD		0x28
>> +
>> +/*
>> + * The platform subtype is used by Qualcomm bootloaders and
>> + * DTS (board-subtype)
>> + * where, "a" indicates boot device type, it can be EMMC,
>> + * UFS, NAND or OTHER (which can be used for default).
>> + * "b" indicates DDR type which can be 128MB, 256MB,
>> + * 512MB, 1024MB, 2048MB, 3072MB, 4096MB or ANY
>> + * (which can be used for default).
>> + */
>> +#define QCOM_BOARD_SUBTYPE(a, b, SUBTYPE) \
>> +	(((QCOM_BOARD_BOOT_##a & 0xf) << 16) | ((QCOM_BOARD_DDRTYPE_##b & 0x7) << 8) | \
>> +	(SUBTYPE & 0xff))
>> +
>> +/* Board DDR Type where each value indicates higher limit */
>> +#define QCOM_BOARD_DDRTYPE_ANY		0x0
>> +#define QCOM_BOARD_DDRTYPE_128M		0x1
>> +#define QCOM_BOARD_DDRTYPE_256M		0x2
>> +#define QCOM_BOARD_DDRTYPE_512M		0x3
>> +#define QCOM_BOARD_DDRTYPE_1024M	0x4
>> +#define QCOM_BOARD_DDRTYPE_2048M	0x5
>> +#define QCOM_BOARD_DDRTYPE_3072M	0x6
>> +#define QCOM_BOARD_DDRTYPE_4096M	0x7
>>   
>> -#define QCOM_BOARD_ID_MTP			8
>> -#define QCOM_BOARD_ID_DRAGONBOARD		10
>> -#define QCOM_BOARD_ID_QRD			11
>> -#define QCOM_BOARD_ID_SBC			24
>> +/* Board Boot Device Type */
>> +#define QCOM_BOARD_BOOT_EMMC		0x0
>> +#define QCOM_BOARD_BOOT_UFS		0x1
>> +#define QCOM_BOARD_BOOT_NAND		0x2
>> +#define QCOM_BOARD_BOOT_OTHER		0x3
>> +
>> +/*
>> + * The PMIC slave id is used by Qualcomm bootloaders to
>> + * indicates which PMIC is attached (pmic-sid)
>> + */
>> +
>> +#define QCOM_PMIC_SID(a)		(a & 0xff)
>> +
>> +/*
>> + * The PMIC ID is used by Qualcomm bootloaders to describe the ID
>> + * of PMIC attached to bus described by SID (pmic-model)
>> + */
>> +
>> +#define QCOM_PMIC_MODEL(ID, major, minor) \
>> +	(((major & 0xff) << 16) | ((minor & 0xff) << 8) | (ID & 0xff))
>> +
>> +/*
>> + * The OEM ID consists of 32 bit value to support OEM boards where they
>> + * have slight differences on top of Qualcomm's standard boards
>> + */
>> +#define QCOM_OEM_ID(a)		(a & 0xffffffff)
>>   
>>   #endif /* _DT_BINDINGS_ARM_QCOM_IDS_H */