[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <d90f9d3d-7823-503f-4cc6-73783a083d0e@salutedevices.com>
Date: Tue, 7 May 2024 09:53:06 +0300
From: Arseniy Krasnov <avkrasnov@...utedevices.com>
To: Miquel Raynal <miquel.raynal@...tlin.com>
CC: Richard Weinberger <richard@....at>, Vignesh Raghavendra
<vigneshr@...com>, Rob Herring <robh+dt@...nel.org>, Krzysztof Kozlowski
<krzysztof.kozlowski+dt@...aro.org>, Conor Dooley <conor+dt@...nel.org>, Neil
Armstrong <neil.armstrong@...aro.org>, Kevin Hilman <khilman@...libre.com>,
Jerome Brunet <jbrunet@...libre.com>, Martin Blumenstingl
<martin.blumenstingl@...glemail.com>, <linux-mtd@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
<linux-amlogic@...ts.infradead.org>, <linux-kernel@...r.kernel.org>,
<oxffffaa@...il.com>, <kernel@...rdevices.ru>
Subject: Re: [PATCH v5 1/2] dt-bindings: mtd: amlogic,meson-nand: support
fields for boot ROM code
On 06.05.2024 16:48, Miquel Raynal wrote:
> Hi Arseniy,
>
> avkrasnov@...utedevices.com wrote on Tue, 16 Apr 2024 11:51:00 +0300:
>
>> Boot ROM code on Meson requires that some pages on NAND must be written
>> in special mode: "short" ECC mode where each block is 384 bytes and
>> scrambling mode is on.
>
> Ok
>
>> Such pages located with the specified interval within specified offset.
>
> I'm sorry I don't get that sentence.
Sorry, I mean this (let me draw :) ) :
[ page 0 ][ page 1 ][ page 2 ][ page 3 ][ page 4 ][ page 5 ][ page 6 ][ page 7 ][ page 8 ][ page 9 ]
For example, we have 10 pages starting from the beginning of the chip - this is "within specified offset",
e.g. offset is 10. BootROM on axg needs that (for example) every third page must be written in "special"
mode: scrambling is on and ECC is 384 bytes. Such pages are 0, 2, 4, 6, 8. E.g. "specified interval" will
be 3.
So:
amlogic,boot-pages: 10
amlogic,boot-page-step: 3
>
>> Both interval and offset are located in the
>> device tree and used by driver if 'nand-is-boot-medium' is set for
>> NAND chip.
>
> This sentence is probably not needed.
Ok
>
>>
>> Signed-off-by: Arseniy Krasnov <avkrasnov@...utedevices.com>
>> ---
>> .../bindings/mtd/amlogic,meson-nand.yaml | 14 ++++++++++++++
>> 1 file changed, 14 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
>> index 57b6957c8415..67b2f7c1259c 100644
>> --- a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
>> +++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
>> @@ -64,11 +64,25 @@ patternProperties:
>> items:
>> maximum: 0
>>
>> + amlogic,boot-pages:
>> + $ref: /schemas/types.yaml#/definitions/uint32
>> + description:
>> + Number of pages starting from 0, where special ECC
>
> from *offset* 0 I guess?
Yes, or may be better "from beginning of the chip" ?
May be i can place here ascii picture from above, with reduced number of pages?
And also place this picture in the commit message ?
>
>> + algorithm will be used by the driver.
>
> "where a special ECC configuration must be used because it is accessed
> by the ROM code"? Maybe you can even detail what are these values if
> they are fixed.
>
> You should probably inform that scrambling shall be on as well.
>
>> +
>> + amlogic,boot-page-step:
>> + $ref: /schemas/types.yaml#/definitions/uint32
>> + description:
>> + Interval between pages, read/written by the driver with
>> + special ECC algorithm.
>
> I'm not sure I fully get the description. What is the unit here? can
> you draw a small ascii-art diagram?
May be i can place here "please see diagram above" ? And in 'amlogic,boot-pages' there
will be diagram.
>
>> +
>> unevaluatedProperties: false
>>
>> dependencies:
>> nand-ecc-strength: [nand-ecc-step-size]
>> nand-ecc-step-size: [nand-ecc-strength]
>> + amlogic,boot-pages: [nand-is-boot-medium, "amlogic,boot-page-step"]
>> + amlogic,boot-page-step: [nand-is-boot-medium, "amlogic,boot-pages"]
>>
>>
>> required:
>
>
> Thanks,
> Miquèl
Thanks, Arseniy
Powered by blists - more mailing lists