linux-kernel - [PATCH 05/11] Documentation: PM: amd-pstate: add debugging section for driver loading failure

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <ecc1c5a061859f9b9532e54f2b64d1cb5fd593c4.1715065568.git.perry.yuan@amd.com>
Date: Tue, 7 May 2024 15:15:21 +0800
From: Perry Yuan <perry.yuan@....com>
To: <rafael.j.wysocki@...el.com>, <Mario.Limonciello@....com>,
	<viresh.kumar@...aro.org>, <Ray.Huang@....com>, <gautham.shenoy@....com>,
	<Borislav.Petkov@....com>
CC: <Alexander.Deucher@....com>, <Xinmei.Huang@....com>,
	<Xiaojian.Du@....com>, <Li.Meng@....com>, <linux-pm@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>
Subject: [PATCH 05/11] Documentation: PM: amd-pstate: add debugging section for driver loading failure

To address issues with the loading of the amd-pstate driver on certain platforms,
It needs to enable dynamic debugging to capture debug messages during the driver
loading process. By adding "amd_pstate.dyndbg=+p cppc_acpi.dyndbg=+p  loglevel=4 debug
amd_pstate=active" to the kernel command line, driver debug logging is enabled.

Signed-off-by: Perry Yuan <perry.yuan@....com>
---
 Documentation/admin-guide/pm/amd-pstate.rst | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/Documentation/admin-guide/pm/amd-pstate.rst b/Documentation/admin-guide/pm/amd-pstate.rst
index 2695feec1baa..230e236796f7 100644
--- a/Documentation/admin-guide/pm/amd-pstate.rst
+++ b/Documentation/admin-guide/pm/amd-pstate.rst
@@ -476,6 +476,19 @@ operations for the new ``amd-pstate`` module with this tool. ::
 Diagnostics and Tuning
 =======================
 
+Debugging AMD P-State Driver Loading Issues
+------------------------------------------
+
+On some platforms, there may be issues with the loading of the amd-pstate driver.
+To capture debug messages for issue analysis, users can add below parameter,
+"amd_pstate.dyndbg=+p cppc_acpi.dyndbg=+p  loglevel=4 debug amd_pstate=active"
+to the kernel command line. This will enable dynamic debugging and allow better
+analysis and troubleshooting of the driver loading process.
+
+Please note that adding this parameter will only enable debug logging during the
+driver loading phase and may affect system behavior. Use this option with caution
+and only for debugging purposes.
+
 Trace Events
 --------------
 
-- 
2.34.1