lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240508170544.263059-3-chris.packham@alliedtelesis.co.nz>
Date: Thu,  9 May 2024 05:05:43 +1200
From: Chris Packham <chris.packham@...iedtelesis.co.nz>
To: jdelvare@...e.com,
	linux@...ck-us.net,
	robh@...nel.org,
	krzk+dt@...nel.org,
	conor+dt@...nel.org
Cc: linux-hwmon@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	Chris Packham <chris.packham@...iedtelesis.co.nz>
Subject: [PATCH 2/2] hwmon: (adt7475) Add support for configuring initial PWM duty cycle

By default the PWM duty cycle in hardware is 100%. On some systems this
can cause unwanted fan noise. Add the ability to take an initial PWM
duty cycle and frequency via device properties.

Signed-off-by: Chris Packham <chris.packham@...iedtelesis.co.nz>
---
 drivers/hwmon/adt7475.c | 56 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 56 insertions(+)

diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
index 4224ffb30483..b0c7c1a95897 100644
--- a/drivers/hwmon/adt7475.c
+++ b/drivers/hwmon/adt7475.c
@@ -1662,6 +1662,54 @@ static int adt7475_set_pwm_polarity(struct i2c_client *client)
 	return 0;
 }
 
+static int adt7475_set_pwm_initial_freq(struct i2c_client *client)
+{
+	int ret, out, i;
+	u32 freqs[ADT7475_PWM_COUNT];
+	int data;
+
+	ret = device_property_read_u32_array(&client->dev,
+					     "pwm-initial-frequency", freqs,
+					     ARRAY_SIZE(freqs));
+	if (ret)
+		return ret;
+
+	for (i = 0; i < ADT7475_PWM_COUNT; i++) {
+		out = find_closest(freqs[i], pwmfreq_table, ARRAY_SIZE(pwmfreq_table));
+		data = adt7475_read(TEMP_TRANGE_REG(i));
+		if (data < 0)
+			return data;
+		data &= ~0xf;
+		data |= out;
+
+		ret = i2c_smbus_write_byte_data(client, TEMP_TRANGE_REG(i), data);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int adt7475_set_pwm_initial_duty(struct i2c_client *client)
+{
+	int ret, i;
+	u32 dutys[ADT7475_PWM_COUNT];
+
+	ret = device_property_read_u32_array(&client->dev,
+					     "adi,pwm-initial-duty-cycle", dutys,
+					     ARRAY_SIZE(dutys));
+	if (ret)
+		return ret;
+
+	for (i = 0; i < ADT7475_PWM_COUNT; i++) {
+		ret = i2c_smbus_write_byte_data(client, PWM_MAX_REG(i), dutys[i] & 0xff);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
 static int adt7475_probe(struct i2c_client *client)
 {
 	enum chips chip;
@@ -1778,6 +1826,14 @@ static int adt7475_probe(struct i2c_client *client)
 	if (ret && ret != -EINVAL)
 		dev_warn(&client->dev, "Error configuring pwm polarity\n");
 
+	ret = adt7475_set_pwm_initial_freq(client);
+	if (ret)
+		return ret;
+
+	ret = adt7475_set_pwm_initial_duty(client);
+	if (ret)
+		return ret;
+
 	/* Start monitoring */
 	switch (chip) {
 	case adt7475:
-- 
2.43.2


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ