lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240508-asoc-x1e80100-4-channel-mapping-v2-3-ccef9a66a572@linaro.org>
Date: Wed, 08 May 2024 10:16:29 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: James Schulman <james.schulman@...rus.com>, 
 David Rhodes <david.rhodes@...rus.com>, 
 Richard Fitzgerald <rf@...nsource.cirrus.com>, 
 Jaroslav Kysela <perex@...ex.cz>, Takashi Iwai <tiwai@...e.com>, 
 Liam Girdwood <lgirdwood@...il.com>, Mark Brown <broonie@...nel.org>, 
 Lars-Peter Clausen <lars@...afoo.de>, 
 Nuno Sá <nuno.sa@...log.com>, 
 Srinivas Kandagatla <srinivas.kandagatla@...aro.org>, 
 Banajit Goswami <bgoswami@...cinc.com>
Cc: alsa-devel@...a-project.org, patches@...nsource.cirrus.com, 
 linux-sound@...r.kernel.org, linux-kernel@...r.kernel.org, 
 Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH v2 3/4] ASoC: qcom: qdsp6: Set channel mapping instead of
 fixed defaults

When constructing packets to DSP, the Audioreach code uses 'struct
audioreach_module_config' to configure parameters like number of
channels, bitrate, sample rate etc, but uses defaults for the channel
mapping.

Rework this code to copy the channel mapping from 'struct
audioreach_module_config', instead of using the default.  This requires
all callers to fill that structure: add missing initialization of
channel mapping.

Entire patch makes code more logical and easier to follow:
1. q6apm-dai and q6apm-lpass-dais code which allocates 'struct
   audioreach_module_config' initializes it fully, so fills both
   the number of channels and the channel mapping.
2. Audioreach code, which uses 'struct audioreach_module_config' when
   constructing packets, copies entire contents of passed config, not
   only pieces of it.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>

---

Changes in v2:
1. Extend commit msg, rationale.
2. Rework to new approach, but most of the code stays.
3. Export audioreach_set_channel_mapping() (needed by Q6APM DAIS and
   LPASS DAIS)
4. Correct channel mapping also in audioreach_mfc_set_media_format(),
   because MFC DAI is now part of backend.
5. Do not adjust dynamic DAIs (drop audioreach_dai_load()).
---
 sound/soc/qcom/qdsp6/audioreach.c       | 30 +++++++-----------------------
 sound/soc/qcom/qdsp6/audioreach.h       |  1 +
 sound/soc/qcom/qdsp6/q6apm-dai.c        |  2 ++
 sound/soc/qcom/qdsp6/q6apm-lpass-dais.c |  5 ++++-
 4 files changed, 14 insertions(+), 24 deletions(-)

diff --git a/sound/soc/qcom/qdsp6/audioreach.c b/sound/soc/qcom/qdsp6/audioreach.c
index 5291deac0a0b..750b8ba64211 100644
--- a/sound/soc/qcom/qdsp6/audioreach.c
+++ b/sound/soc/qcom/qdsp6/audioreach.c
@@ -267,7 +267,7 @@ void *audioreach_alloc_apm_cmd_pkt(int pkt_size, uint32_t opcode, uint32_t token
 }
 EXPORT_SYMBOL_GPL(audioreach_alloc_apm_cmd_pkt);
 
-static void audioreach_set_channel_mapping(u8 *ch_map, int num_channels)
+void audioreach_set_channel_mapping(u8 *ch_map, int num_channels)
 {
 	if (num_channels == 1) {
 		ch_map[0] =  PCM_CHANNEL_FL;
@@ -281,6 +281,7 @@ static void audioreach_set_channel_mapping(u8 *ch_map, int num_channels)
 		ch_map[3] =  PCM_CHANNEL_RS;
 	}
 }
+EXPORT_SYMBOL_GPL(audioreach_set_channel_mapping);
 
 static void apm_populate_container_config(struct apm_container_obj *cfg,
 					  struct audioreach_container *cont)
@@ -819,7 +820,7 @@ static int audioreach_mfc_set_media_format(struct q6apm_graph *graph,
 	uint32_t num_channels = cfg->num_channels;
 	int payload_size;
 	struct gpr_pkt *pkt;
-	int rc;
+	int rc, i;
 	void *p;
 
 	payload_size = APM_MFC_CFG_PSIZE(media_format, num_channels) +
@@ -842,18 +843,8 @@ static int audioreach_mfc_set_media_format(struct q6apm_graph *graph,
 	media_format->sample_rate = cfg->sample_rate;
 	media_format->bit_width = cfg->bit_width;
 	media_format->num_channels = cfg->num_channels;
-
-	if (num_channels == 1) {
-		media_format->channel_mapping[0] = PCM_CHANNEL_FL;
-	} else if (num_channels == 2) {
-		media_format->channel_mapping[0] = PCM_CHANNEL_FL;
-		media_format->channel_mapping[1] = PCM_CHANNEL_FR;
-	} else if (num_channels == 4) {
-		media_format->channel_mapping[0] = PCM_CHANNEL_FL;
-		media_format->channel_mapping[1] = PCM_CHANNEL_FR;
-		media_format->channel_mapping[2] = PCM_CHANNEL_LS;
-		media_format->channel_mapping[3] = PCM_CHANNEL_RS;
-	}
+	for (i = 0; i < num_channels; i++)
+		media_format->channel_mapping[i] = cfg->channel_map[i];
 
 	rc = q6apm_send_cmd_sync(graph->apm, pkt, 0);
 
@@ -883,9 +874,6 @@ static int audioreach_set_compr_media_format(struct media_format *media_fmt_hdr,
 		mp3_cfg->q_factor = mcfg->bit_width - 1;
 		mp3_cfg->endianness = PCM_LITTLE_ENDIAN;
 		mp3_cfg->num_channels = mcfg->num_channels;
-
-		audioreach_set_channel_mapping(mp3_cfg->channel_mapping,
-					       mcfg->num_channels);
 		break;
 	case SND_AUDIOCODEC_AAC:
 		media_fmt_hdr->data_format = DATA_FORMAT_RAW_COMPRESSED;
@@ -1104,9 +1092,7 @@ static int audioreach_pcm_set_media_format(struct q6apm_graph *graph,
 	media_cfg->num_channels = mcfg->num_channels;
 	media_cfg->q_factor = mcfg->bit_width - 1;
 	media_cfg->bits_per_sample = mcfg->bit_width;
-
-	audioreach_set_channel_mapping(media_cfg->channel_mapping,
-				       num_channels);
+	memcpy(media_cfg->channel_mapping, mcfg->channel_map, mcfg->num_channels);
 
 	rc = q6apm_send_cmd_sync(graph->apm, pkt, 0);
 
@@ -1163,9 +1149,7 @@ static int audioreach_shmem_set_media_format(struct q6apm_graph *graph,
 		cfg->q_factor = mcfg->bit_width - 1;
 		cfg->endianness = PCM_LITTLE_ENDIAN;
 		cfg->num_channels = mcfg->num_channels;
-
-		audioreach_set_channel_mapping(cfg->channel_mapping,
-					       num_channels);
+		memcpy(cfg->channel_mapping, mcfg->channel_map, mcfg->num_channels);
 	} else {
 		rc = audioreach_set_compr_media_format(header, p, mcfg);
 		if (rc) {
diff --git a/sound/soc/qcom/qdsp6/audioreach.h b/sound/soc/qcom/qdsp6/audioreach.h
index eb9306280988..208b74e50445 100644
--- a/sound/soc/qcom/qdsp6/audioreach.h
+++ b/sound/soc/qcom/qdsp6/audioreach.h
@@ -766,6 +766,7 @@ struct audioreach_module_config {
 /* Packet Allocation routines */
 void *audioreach_alloc_apm_cmd_pkt(int pkt_size, uint32_t opcode, uint32_t
 				    token);
+void audioreach_set_channel_mapping(u8 *ch_map, int num_channels);
 void *audioreach_alloc_cmd_pkt(int payload_size, uint32_t opcode,
 			       uint32_t token, uint32_t src_port,
 			       uint32_t dest_port);
diff --git a/sound/soc/qcom/qdsp6/q6apm-dai.c b/sound/soc/qcom/qdsp6/q6apm-dai.c
index 00bbd291be5c..8ab55869e8a2 100644
--- a/sound/soc/qcom/qdsp6/q6apm-dai.c
+++ b/sound/soc/qcom/qdsp6/q6apm-dai.c
@@ -243,6 +243,7 @@ static int q6apm_dai_prepare(struct snd_soc_component *component,
 	cfg.num_channels = runtime->channels;
 	cfg.bit_width = prtd->bits_per_sample;
 	cfg.fmt = SND_AUDIOCODEC_PCM;
+	audioreach_set_channel_mapping(cfg.channel_map, runtime->channels);
 
 	if (prtd->state) {
 		/* clear the previous setup if any  */
@@ -669,6 +670,7 @@ static int q6apm_dai_compr_set_params(struct snd_soc_component *component,
 		cfg.num_channels = 2;
 		cfg.bit_width = prtd->bits_per_sample;
 		cfg.fmt = codec->id;
+		audioreach_set_channel_mapping(cfg.channel_map, cfg.num_channels);
 		memcpy(&cfg.codec, codec, sizeof(*codec));
 
 		ret = q6apm_graph_media_format_shmem(prtd->graph, &cfg);
diff --git a/sound/soc/qcom/qdsp6/q6apm-lpass-dais.c b/sound/soc/qcom/qdsp6/q6apm-lpass-dais.c
index a4ad1d0e6abd..8340e4fb78f4 100644
--- a/sound/soc/qcom/qdsp6/q6apm-lpass-dais.c
+++ b/sound/soc/qcom/qdsp6/q6apm-lpass-dais.c
@@ -106,6 +106,7 @@ static int q6hdmi_hw_params(struct snd_pcm_substream *substream,
 	cfg->bit_width = params_width(params);
 	cfg->sample_rate = params_rate(params);
 	cfg->num_channels = channels;
+	audioreach_set_channel_mapping(cfg->channel_map, channels);
 
 	switch (dai->id) {
 	case DISPLAY_PORT_RX_0:
@@ -130,10 +131,12 @@ static int q6dma_hw_params(struct snd_pcm_substream *substream,
 {
 	struct q6apm_lpass_dai_data *dai_data = dev_get_drvdata(dai->dev);
 	struct audioreach_module_config *cfg = &dai_data->module_config[dai->id];
+	int channels = hw_param_interval_c(params, SNDRV_PCM_HW_PARAM_CHANNELS)->max;
 
 	cfg->bit_width = params_width(params);
 	cfg->sample_rate = params_rate(params);
-	cfg->num_channels = hw_param_interval_c(params, SNDRV_PCM_HW_PARAM_CHANNELS)->max;
+	cfg->num_channels = channels;
+	audioreach_set_channel_mapping(cfg->channel_map, channels);
 
 	return 0;
 }

-- 
2.43.0


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ