[<prev] [next>] [day] [month] [year] [list]
Message-Id: <20240508100013.2693440-1-victor.liu@nxp.com>
Date: Wed, 8 May 2024 18:00:13 +0800
From: Liu Ying <victor.liu@....com>
To: imx@...ts.linux.dev,
linux-arm-kernel@...ts.infradead.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: shawnguo@...nel.org,
s.hauer@...gutronix.de,
kernel@...gutronix.de,
festevam@...il.com,
robh@...nel.org,
krzk+dt@...nel.org,
conor+dt@...nel.org
Subject: [PATCH] arm64: dts: imx8mp-evk: Add MX8-DLVDS-LCD1 display module support
MX8-DLVDS-LCD1 display module integrates a KOE TX26D202VM0BWA LCD panel
and a touch IC. Add an overlay to support the LCD panel on i.MX8MP EVK.
Specify 148.5MHz clock frequency in panel-timing node to accommodate
3.5-fold 519.75MHz media_ldb clock which is derived from 1.0395GHz
video_pll1 clock.
Signed-off-by: Liu Ying <victor.liu@....com>
---
arch/arm64/boot/dts/freescale/Makefile | 3 +
.../freescale/imx8mp-evk-mx8-dlvds-lcd1.dtso | 77 +++++++++++++++++++
arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 19 +++++
3 files changed, 99 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-evk-mx8-dlvds-lcd1.dtso
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 045250d0a040..005f6c514f44 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -185,6 +185,9 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-mallow.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-yavia.dtb
+imx8mp-evk-mx8-dlvds-lcd1-dtbs += imx8mp-evk.dtb imx8mp-evk-mx8-dlvds-lcd1.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk-mx8-dlvds-lcd1.dtb
+
imx8mp-tqma8mpql-mba8mpxl-lvds-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds.dtbo
imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtbo
dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl-lvds.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk-mx8-dlvds-lcd1.dtso b/arch/arm64/boot/dts/freescale/imx8mp-evk-mx8-dlvds-lcd1.dtso
new file mode 100644
index 000000000000..1b71890d43d5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk-mx8-dlvds-lcd1.dtso
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+ panel-lvds {
+ compatible = "koe,tx26d202vm0bwa";
+ backlight = <&backlight_lvds>;
+ power-supply = <®_vext_3v3>;
+
+ panel-timing {
+ clock-frequency = <148500000>;
+ hactive = <1920>;
+ vactive = <1200>;
+ hfront-porch = <130>;
+ hback-porch = <70>;
+ hsync-len = <30>;
+ vfront-porch = <5>;
+ vback-porch = <5>;
+ vsync-len = <5>;
+ de-active = <1>;
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dual-lvds-odd-pixels;
+
+ panel_in_odd: endpoint {
+ remote-endpoint = <&ldb_lvds_ch0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dual-lvds-even-pixels;
+
+ panel_in_even: endpoint {
+ remote-endpoint = <&ldb_lvds_ch1>;
+ };
+ };
+ };
+ };
+};
+
+&backlight_lvds {
+ status = "okay";
+};
+
+&lcdif2 {
+ status = "okay";
+};
+
+&lvds_bridge {
+ status = "okay";
+
+ ports {
+ port@1 {
+ ldb_lvds_ch0: endpoint {
+ remote-endpoint = <&panel_in_odd>;
+ };
+ };
+
+ port@2 {
+ ldb_lvds_ch1: endpoint {
+ remote-endpoint = <&panel_in_even>;
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index 9beba8d6a0df..1cb71f566b0f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -16,6 +16,16 @@ chosen {
stdout-path = &uart2;
};
+ backlight_lvds: backlight-lvds {
+ compatible = "pwm-backlight";
+ pwms = <&pwm2 0 100000 0>;
+ brightness-levels = <0 100>;
+ num-interpolated-steps = <100>;
+ default-brightness-level = <100>;
+ power-supply = <®_per_12v>;
+ status = "disabled";
+ };
+
hdmi-connector {
compatible = "hdmi-connector";
label = "hdmi";
@@ -96,6 +106,15 @@ reg_pcie0: regulator-pcie {
enable-active-high;
};
+ reg_per_12v: regulator-per-12v {
+ compatible = "regulator-fixed";
+ regulator-name = "PER_12V";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ gpio = <&pca6416 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
reg_usdhc2_vmmc: regulator-usdhc2 {
compatible = "regulator-fixed";
pinctrl-names = "default";
--
2.34.1
Powered by blists - more mailing lists