| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID:
<MWHPR03MB32455B0276679AF8D7319D8D9BE52@MWHPR03MB3245.namprd03.prod.outlook.com>
Date: Wed, 8 May 2024 11:47:15 +0000
From: "Togorean, Bogdan" <Bogdan.Togorean@...log.com>
To: "julien.massot@...labora.com" <julien.massot@...labora.com>
CC: "conor+dt@...nel.org" <conor+dt@...nel.org>,
"devicetree@...r.kernel.org"
<devicetree@...r.kernel.org>,
"kernel@...labora.com" <kernel@...labora.com>,
"krzysztof.kozlowski+dt@...aro.org" <krzysztof.kozlowski+dt@...aro.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-media@...r.kernel.org" <linux-media@...r.kernel.org>,
"mchehab@...nel.org" <mchehab@...nel.org>,
"robh+dt@...nel.org"
<robh+dt@...nel.org>,
"sakari.ailus@....fi" <sakari.ailus@....fi>
Subject: Re: [PATCH v7 3/5] media: i2c: add MAX96717 driver
Hi Julien,
> This driver handles the MAX96717 serializer in tunnel mode.
> All incoming CSI traffic will be tunneled through the GMSL2 link.
>
> The MAX96717 driver can handle MAX96717 and MAX96717F variants with the same "maxim,max96717f" compatible.
>
> Signed-off-by: Julien Massot <julien.massot@...labora.com>
> ---
> Change since v6:
> - Kconfig select MEDIA_CONTROLLER, V4L2_FWNODE and VIDEO_V4L2_SUBDEV_API
> - rename 'REG3' register to 'MAX96717_REG3'
> - Initialized 'ret' variable in 'max96717_gpiochip_probe'
> - remove max96714_v4l2_notifier_unregister and call the function directly
> - Do not store private pointer with i2c_set_clientdata since the v4l2-i2c
> uses it to store the subdev pointer
> - use dev_err_probe at gpio chip initialization
>
> Change since v5:
> - set the driver compatible back to MAX96717F that can be used as a fallback for MAX96717
>
> Change since v4:
> - make the driver compatible with MAX96717 instead of MAX96717F
> - Add the device id for the MAX96717
> - remove hw_data structure for now, it can be usefull later for handling different serializers e.g max9295
>
> Change since v3:
> - Maintainers: align to the new binding path
> - Kconfig: better describe the symbol
> - store the v4l2_mbus_config_mipi_csi2 structure instead of the full endpoint in the driver private structure
> - use MAX96717_PAD_SINK/SOURCE instead of 0/1 for pad intialization
> - Removed incorrect call to fwnode_handle_put(priv->sd.fwnode)
> - Use unsigned int instead of u8
> - Allocate clk name out of the clk struct initialization
> - fixed multiline comment
> - Removed one unnecessary goto at the end of the probe function
>
> Change since v2:
> - Use CCI helpers instead of recoding register access
> - add missing bitfield header
> ---
> MAINTAINERS | 7 +
> drivers/media/i2c/Kconfig | 17 +
> drivers/media/i2c/Makefile | 1 +
> drivers/media/i2c/max96717.c | 928 +++++++++++++++++++++++++++++++++++
> 4 files changed, 953 insertions(+)
> create mode 100644 drivers/media/i2c/max96717.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index eea74166a2d9..cfaa904ace59 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -13426,6 +13426,13 @@ S: Maintained
> F: Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml
> F: drivers/staging/media/max96712/max96712.c
> +MAX96717 GMSL2 SERIALIZER DRIVER
> +M: Julien Massot <julien.massot@...labora.com>
> +L: linux-media@...r.kernel.org
> +S: Maintained
> +F: Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml
> +F: drivers/media/i2c/max96717.c
> +
> MAX9860 MONO AUDIO VOICE CODEC DRIVER
> M: Peter Rosin <peda@...ntia.se>
> L: alsa-devel@...a-project.org (moderated for non-subscribers)
> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig index c6d3ee472d81..9918195e09ba 100644
> --- a/drivers/media/i2c/Kconfig
> +++ b/drivers/media/i2c/Kconfig
> @@ -1575,6 +1575,23 @@ config VIDEO_DS90UB960
> Device driver for the Texas Instruments DS90UB960
> FPD-Link III Deserializer and DS90UB9702 FPD-Link IV Deserializer.
> +config VIDEO_MAX96717
> + tristate "Maxim MAX96717 GMSL2 Serializer support"
> + depends on OF && I2C && VIDEO_DEV && COMMON_CLK
> + select I2C_MUX
> + select MEDIA_CONTROLLER
> + select GPIOLIB
> + select V4L2_CCI_I2C
> + select V4L2_FWNODE
> + select VIDEO_V4L2_SUBDEV_API
> + help
> + Device driver for the Maxim MAX96717 GMSL2 Serializer.
> + MAX96717 serializers convert video on a MIPI CSI-2
> + input to a GMSL2 output.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called max96717.
> +
> endmenu
> endif # VIDEO_DEV
> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile index dfbe6448b549..9e007116f929 100644
> --- a/drivers/media/i2c/Makefile
> +++ b/drivers/media/i2c/Makefile
> @@ -64,6 +64,7 @@ obj-$(CONFIG_VIDEO_LM3646) += lm3646.o
> obj-$(CONFIG_VIDEO_M52790) += m52790.o
> obj-$(CONFIG_VIDEO_MAX9271_LIB) += max9271.o
> obj-$(CONFIG_VIDEO_MAX9286) += max9286.o
> +obj-$(CONFIG_VIDEO_MAX96717) += max96717.o
> obj-$(CONFIG_VIDEO_ML86V7667) += ml86v7667.o
> obj-$(CONFIG_VIDEO_MSP3400) += msp3400.o
> obj-$(CONFIG_VIDEO_MT9M001) += mt9m001.o diff --git a/drivers/media/i2c/max96717.c b/drivers/media/i2c/max96717.c new file
> mode 100644 index 000000000000..1ea76f922bdb
> --- /dev/null
> +++ b/drivers/media/i2c/max96717.c
> @@ -0,0 +1,928 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Maxim GMSL2 Serializer Driver
> + *
> + * Copyright (C) 2024 Collabora Ltd.
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/delay.h>
> +#include <linux/fwnode.h>
> +#include <linux/gpio/driver.h>
> +#include <linux/i2c-mux.h>
> +#include <linux/i2c.h>
> +#include <linux/regmap.h>
> +
> +#include <media/v4l2-cci.h>
> +#include <media/v4l2-fwnode.h>
> +#include <media/v4l2-subdev.h>
> +
> +#define MAX96717_DEVICE_ID 0xbf
> +#define MAX96717F_DEVICE_ID 0xc8
> +#define MAX96717_PORTS 2
> +#define MAX96717_PAD_SINK 0
> +#define MAX96717_PAD_SOURCE 1
> +
> +#define MAX96717_DEFAULT_CLKOUT_RATE 24000000UL
> +
> +/* DEV */
> +#define MAX96717_REG3 CCI_REG8(0x3)
> +#define MAX96717_RCLKSEL GENMASK(1, 0)
> +#define RCLKSEL_REF_PLL CCI_REG8(0x3)
> +#define MAX96717_REG6 CCI_REG8(0x6)
> +#define RCLKEN BIT(5)
> +#define MAX96717_DEV_ID CCI_REG8(0xd)
> +#define MAX96717_DEV_REV CCI_REG8(0xe)
> +#define MAX96717_DEV_REV_MASK GENMASK(3, 0)
> +
> +/* VID_TX Z */
> +#define MAX96717_VIDEO_TX2 CCI_REG8(0x112) #define
> +MAX96717_VIDEO_PCLKDET BIT(7)
> +
> +/* GPIO */
> +#define MAX96717_NUM_GPIO 11
> +#define MAX96717_GPIO_REG_A(gpio) CCI_REG8(0x2be + (gpio) * 3)
> +#define MAX96717_GPIO_OUT BIT(4)
> +#define MAX96717_GPIO_IN BIT(3)
> +#define MAX96717_GPIO_RX_EN BIT(2)
> +#define MAX96717_GPIO_TX_EN BIT(1)
> +#define MAX96717_GPIO_OUT_DIS BIT(0)
> +
> +/* FRONTTOP */
> +/* MAX96717 only have CSI port 'B' */
> +#define MAX96717_FRONTOP0 CCI_REG8(0x308)
> +#define MAX96717_START_PORT_B BIT(5)
> +
> +/* MIPI_RX */
> +#define MAX96717_MIPI_RX1 CCI_REG8(0x331)
> +#define MAX96717_MIPI_LANES_CNT GENMASK(5, 4)
> +#define MAX96717_MIPI_RX2 CCI_REG8(0x332) /* phy1 Lanes map */
> +#define MAX96717_PHY2_LANES_MAP GENMASK(7, 4)
> +#define MAX96717_MIPI_RX3 CCI_REG8(0x333) /* phy2 Lanes map */
> +#define MAX96717_PHY1_LANES_MAP GENMASK(3, 0)
> +#define MAX96717_MIPI_RX4 CCI_REG8(0x334) /* phy1 lane polarities */
> +#define MAX96717_PHY1_LANES_POL GENMASK(6, 4)
> +#define MAX96717_MIPI_RX5 CCI_REG8(0x335) /* phy2 lane polarities */
> +#define MAX96717_PHY2_LANES_POL GENMASK(2, 0)
> +
> +/* MIPI_RX_EXT */
> +#define MAX96717_MIPI_RX_EXT11 CCI_REG8(0x383)
> +#define MAX96717_TUN_MODE BIT(7)
> +
> +/* REF_VTG */
> +#define REF_VTG0 CCI_REG8(0x3f0)
> +#define REFGEN_PREDEF_EN BIT(6)
> +#define REFGEN_PREDEF_FREQ_MASK GENMASK(5, 4) #define
> +REFGEN_PREDEF_FREQ_ALT BIT(3)
> +#define REFGEN_RST BIT(1)
> +#define REFGEN_EN BIT(0)
> +
> +/* MISC */
> +#define PIO_SLEW_1 CCI_REG8(0x570)
> +
> +struct max96717_priv {
> + struct i2c_client *client;
> + struct regmap *regmap;
> + struct i2c_mux_core *mux;
> + struct v4l2_mbus_config_mipi_csi2 mipi_csi2;
> + struct v4l2_subdev sd;
> + struct media_pad pads[MAX96717_PORTS];
> + struct v4l2_async_notifier notifier;
> + struct v4l2_subdev *source_sd;
> + u16 source_sd_pad;
> + u64 enabled_source_streams;
> + u8 pll_predef_index;
> + struct clk_hw clk_hw;
> + struct gpio_chip gpio_chip;
> +};
> +
> +static inline struct max96717_priv *sd_to_max96717(struct v4l2_subdev
> +*sd) {
> + return container_of(sd, struct max96717_priv, sd); }
> +
> +static inline struct max96717_priv *clk_hw_to_max96717(struct clk_hw
> +*hw) {
> + return container_of(hw, struct max96717_priv, clk_hw); }
> +
> +static int max96717_i2c_mux_select(struct i2c_mux_core *mux, u32 chan)
> +{
> + return 0;
> +}
> +
> +static int max96717_i2c_mux_init(struct max96717_priv *priv) {
> + priv->mux = i2c_mux_alloc(priv->client->adapter, &priv->client->dev,
> + 1, 0, I2C_MUX_LOCKED | I2C_MUX_GATE,
> + max96717_i2c_mux_select, NULL);
> + if (!priv->mux)
> + return -ENOMEM;
> +
> + return i2c_mux_add_adapter(priv->mux, 0, 0, 0); }
>From my perspective i2c-atr should be used here. Besides i2c muxing ADI serializers support
address translation and this functionality is especially useful in configurations with multiple
serializers connected to same deserializer.
> +
> +static inline int max96717_start_csi(struct max96717_priv *priv, bool
> start)
> +{
> + return cci_update_bits(priv->regmap, MAX96717_FRONTOP0,
> + MAX96717_START_PORT_B,
> + start ? MAX96717_START_PORT_B : 0, NULL); }
> +
> +static int max96717_gpiochip_get(struct gpio_chip *gpiochip,
> + unsigned int offset)
> +{
> + struct max96717_priv *priv = gpiochip_get_data(gpiochip);
> + u64 val;
> + int ret;
> +
> + ret = cci_read(priv->regmap, MAX96717_GPIO_REG_A(offset),
> + &val, NULL);
> + if (ret)
> + return ret;
> +
> + if (val & MAX96717_GPIO_OUT_DIS)
> + return !!(val & MAX96717_GPIO_IN);
> + else
> + return !!(val & MAX96717_GPIO_OUT);
> +}
> +
> +static void max96717_gpiochip_set(struct gpio_chip *gpiochip,
> + unsigned int offset, int value)
> +{
> + struct max96717_priv *priv = gpiochip_get_data(gpiochip);
> +
> + cci_update_bits(priv->regmap, MAX96717_GPIO_REG_A(offset),
> + MAX96717_GPIO_OUT, MAX96717_GPIO_OUT, NULL); }
> +
> +static int max96717_gpio_get_direction(struct gpio_chip *gpiochip,
> + unsigned int offset)
> +{
> + struct max96717_priv *priv = gpiochip_get_data(gpiochip);
> + u64 val;
> + int ret;
> +
> + ret = cci_read(priv->regmap, MAX96717_GPIO_REG_A(offset), &val, NULL);
> + if (ret < 0)
> + return ret;
> +
> + return !!(val & MAX96717_GPIO_OUT_DIS); }
> +
> +static int max96717_gpio_direction_out(struct gpio_chip *gpiochip,
> + unsigned int offset, int value) {
> + struct max96717_priv *priv = gpiochip_get_data(gpiochip);
> +
> + return cci_update_bits(priv->regmap, MAX96717_GPIO_REG_A(offset),
> + MAX96717_GPIO_OUT_DIS | MAX96717_GPIO_OUT,
> + value ? MAX96717_GPIO_OUT : 0, NULL); }
> +
> +static int max96717_gpio_direction_in(struct gpio_chip *gpiochip,
> + unsigned int offset)
> +{
> + struct max96717_priv *priv = gpiochip_get_data(gpiochip);
> +
> + return cci_update_bits(priv->regmap, MAX96717_GPIO_REG_A(offset),
> + MAX96717_GPIO_OUT_DIS, MAX96717_GPIO_OUT_DIS,
> + NULL);
> +}
> +
> +static int max96717_gpiochip_probe(struct max96717_priv *priv) {
> + struct device *dev = &priv->client->dev;
> + struct gpio_chip *gc = &priv->gpio_chip;
> + int i, ret = 0;
MFP pins of GMSL serdes are multifunctional as the name suggests and I think that proper
pinctrl should be implemented and expose alternative functions like RCLKOUT (MFP2, MFP4),
PCLK(MFP0-MFP8), GPIO forwarding.
Also with pinctrl we will be able to control bias, jitter compensation, drive strength
> +
> + gc->label = dev_name(dev);
> + gc->parent = dev;
> + gc->owner = THIS_MODULE;
> + gc->ngpio = MAX96717_NUM_GPIO;
> + gc->base = -1;
> + gc->can_sleep = true;
> + gc->get_direction = max96717_gpio_get_direction;
> + gc->direction_input = max96717_gpio_direction_in;
> + gc->direction_output = max96717_gpio_direction_out;
> + gc->set = max96717_gpiochip_set;
> + gc->get = max96717_gpiochip_get;
> + gc->of_gpio_n_cells = 2;
> +
> + /* Disable GPIO forwarding */
> + for (i = 0; i < gc->ngpio; i++)
> + cci_update_bits(priv->regmap, MAX96717_GPIO_REG_A(i),
> + MAX96717_GPIO_RX_EN | MAX96717_GPIO_TX_EN,
> + 0, &ret);
I think we should not ignore forwarding. It is often used in propagation of FSYNC
from host(deserializer) side to serializers and further to sensors for multiple cameras synchronization.
> +
> + if (ret)
> + return ret;
> +
> + ret = devm_gpiochip_add_data(dev, gc, priv);
> + if (ret) {
> + dev_err(dev, "Unable to create gpio_chip\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int _max96717_set_routing(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state,
> + struct v4l2_subdev_krouting *routing) {
> + static const struct v4l2_mbus_framefmt format = {
> + .width = 1280,
> + .height = 1080,
> + .code = MEDIA_BUS_FMT_Y8_1X8,
> + .field = V4L2_FIELD_NONE,
> + };
> + int ret;
> +
> + ret = v4l2_subdev_routing_validate(sd, routing,
> + V4L2_SUBDEV_ROUTING_ONLY_1_TO_1);
> + if (ret)
> + return ret;
> +
> + ret = v4l2_subdev_set_routing_with_fmt(sd, state, routing, &format);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int max96717_set_routing(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state,
> + enum v4l2_subdev_format_whence which,
> + struct v4l2_subdev_krouting *routing) {
> + struct max96717_priv *priv = sd_to_max96717(sd);
> +
> + if (which == V4L2_SUBDEV_FORMAT_ACTIVE && priv->enabled_source_streams)
> + return -EBUSY;
> +
> + return _max96717_set_routing(sd, state, routing); }
> +
> +static int max96717_set_fmt(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state,
> + struct v4l2_subdev_format *format) {
> + struct max96717_priv *priv = sd_to_max96717(sd);
> + struct v4l2_mbus_framefmt *fmt;
> + u64 stream_source_mask;
> +
> + if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE &&
> + priv->enabled_source_streams)
> + return -EBUSY;
> +
> + /* No transcoding, source and sink formats must match. */
> + if (format->pad == MAX96717_PAD_SOURCE)
> + return v4l2_subdev_get_fmt(sd, state, format);
> +
> + /* Set sink format */
> + fmt = v4l2_subdev_state_get_format(state, format->pad, format->stream);
> + if (!fmt)
> + return -EINVAL;
> +
> + *fmt = format->format;
> +
> + /* Propagate to source format */
> + fmt = v4l2_subdev_state_get_opposite_stream_format(state, format->pad,
> + format->stream);
> + if (!fmt)
> + return -EINVAL;
> + *fmt = format->format;
> +
> + stream_source_mask = BIT(format->stream);
> +
> + return v4l2_subdev_state_xlate_streams(state, MAX96717_PAD_SOURCE,
> + MAX96717_PAD_SINK,
> + &stream_source_mask);
> +}
> +
> +static int max96717_init_state(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state) {
> + struct v4l2_subdev_route routes[] = {
> + {
> + .sink_pad = MAX96717_PAD_SINK,
> + .sink_stream = 0,
> + .source_pad = MAX96717_PAD_SOURCE,
> + .source_stream = 0,
> + .flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE,
> + },
> + };
> + struct v4l2_subdev_krouting routing = {
> + .num_routes = ARRAY_SIZE(routes),
> + .routes = routes,
> + };
> +
> + return _max96717_set_routing(sd, state, &routing); }
> +
> +static bool max96717_pipe_pclkdet(struct max96717_priv *priv) {
> + u64 val = 0;
> +
> + cci_read(priv->regmap, MAX96717_VIDEO_TX2, &val, NULL);
> +
> + return val & MAX96717_VIDEO_PCLKDET;
> +}
> +
> +static int max96717_log_status(struct v4l2_subdev *sd) {
> + struct max96717_priv *priv = sd_to_max96717(sd);
> + struct device *dev = &priv->client->dev;
> +
> + dev_info(dev, "Serializer: max96717\n");
> + dev_info(dev, "Pipe: pclkdet:%d\n", max96717_pipe_pclkdet(priv));
> +
> + return 0;
> +}
> +
> +static int max96717_enable_streams(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state, u32 pad,
> + u64 streams_mask)
> +{
> + struct max96717_priv *priv = sd_to_max96717(sd);
> + struct device *dev = &priv->client->dev;
> + u64 sink_streams;
> + int ret;
> +
> + sink_streams = v4l2_subdev_state_xlate_streams(state,
> + MAX96717_PAD_SOURCE,
> + MAX96717_PAD_SINK,
> + &streams_mask);
> +
> + if (!priv->enabled_source_streams)
> + max96717_start_csi(priv, true);
> +
> + ret = v4l2_subdev_enable_streams(priv->source_sd, priv->source_sd_pad,
> + sink_streams);
> + if (ret) {
> + dev_err(dev, "Fail to start streams:%llu on remote subdev\n",
> + sink_streams);
> + goto stop_csi;
> + }
> +
> + priv->enabled_source_streams |= streams_mask;
> +
> + return 0;
> +
> +stop_csi:
> + if (!priv->enabled_source_streams)
> + max96717_start_csi(priv, false);
> + return ret;
> +}
> +
> +static int max96717_disable_streams(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state, u32 pad,
> + u64 streams_mask)
> +{
> + struct max96717_priv *priv = sd_to_max96717(sd);
> + u64 sink_streams;
> + int ret;
> +
> + sink_streams = v4l2_subdev_state_xlate_streams(state,
> + MAX96717_PAD_SOURCE,
> + MAX96717_PAD_SINK,
> + &streams_mask);
> +
> + ret = v4l2_subdev_disable_streams(priv->source_sd, priv->source_sd_pad,
> + sink_streams);
> + if (ret)
> + return ret;
> +
> + priv->enabled_source_streams &= ~streams_mask;
> +
> + if (!priv->enabled_source_streams)
> + max96717_start_csi(priv, false);
> +
> + return 0;
> +}
> +
> +static const struct v4l2_subdev_pad_ops max96717_pad_ops = {
> + .enable_streams = max96717_enable_streams,
> + .disable_streams = max96717_disable_streams,
> + .set_routing = max96717_set_routing,
> + .get_fmt = v4l2_subdev_get_fmt,
> + .set_fmt = max96717_set_fmt,
> +};
> +
> +static const struct v4l2_subdev_core_ops max96717_subdev_core_ops = {
> + .log_status = max96717_log_status,
> +};
> +
> +static const struct v4l2_subdev_internal_ops max96717_internal_ops = {
> + .init_state = max96717_init_state,
> +};
> +
> +static const struct v4l2_subdev_ops max96717_subdev_ops = {
> + .core = &max96717_subdev_core_ops,
> + .pad = &max96717_pad_ops,
> +};
> +
> +static const struct media_entity_operations max96717_entity_ops = {
> + .link_validate = v4l2_subdev_link_validate, };
> +
> +static int max96717_notify_bound(struct v4l2_async_notifier *notifier,
> + struct v4l2_subdev *source_subdev,
> + struct v4l2_async_connection *asd) {
> + struct max96717_priv *priv = sd_to_max96717(notifier->sd);
> + struct device *dev = &priv->client->dev;
> + int ret;
> +
> + ret = media_entity_get_fwnode_pad(&source_subdev->entity,
> + source_subdev->fwnode,
> + MEDIA_PAD_FL_SOURCE);
> + if (ret < 0) {
> + dev_err(dev, "Failed to find pad for %s\n",
> + source_subdev->name);
> + return ret;
> + }
> +
> + priv->source_sd = source_subdev;
> + priv->source_sd_pad = ret;
> +
> + ret = media_create_pad_link(&source_subdev->entity, priv->source_sd_pad,
> + &priv->sd.entity, 0,
> + MEDIA_LNK_FL_ENABLED |
> + MEDIA_LNK_FL_IMMUTABLE);
> + if (ret) {
> + dev_err(dev, "Unable to link %s:%u -> %s:0\n",
> + source_subdev->name, priv->source_sd_pad,
> + priv->sd.name);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static const struct v4l2_async_notifier_operations max96717_notify_ops = {
> + .bound = max96717_notify_bound,
> +};
> +
> +static int max96717_v4l2_notifier_register(struct max96717_priv *priv)
> +{
> + struct device *dev = &priv->client->dev;
> + struct v4l2_async_connection *asd;
> + struct fwnode_handle *ep_fwnode;
> + int ret;
> +
> + ep_fwnode = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev),
> + MAX96717_PAD_SINK, 0, 0);
> + if (!ep_fwnode) {
> + dev_err(dev, "No graph endpoint\n");
> + return -ENODEV;
> + }
> +
> + v4l2_async_subdev_nf_init(&priv->notifier, &priv->sd);
> +
> + asd = v4l2_async_nf_add_fwnode_remote(&priv->notifier, ep_fwnode,
> + struct v4l2_async_connection);
> +
> + fwnode_handle_put(ep_fwnode);
> +
> + if (IS_ERR(asd)) {
> + dev_err(dev, "Failed to add subdev: %ld", PTR_ERR(asd));
> + v4l2_async_nf_cleanup(&priv->notifier);
> + return PTR_ERR(asd);
> + }
> +
> + priv->notifier.ops = &max96717_notify_ops;
> +
> + ret = v4l2_async_nf_register(&priv->notifier);
> + if (ret) {
> + dev_err(dev, "Failed to register subdev_notifier");
> + v4l2_async_nf_cleanup(&priv->notifier);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int max96717_subdev_init(struct max96717_priv *priv) {
> + struct device *dev = &priv->client->dev;
> + int ret;
> +
> + v4l2_i2c_subdev_init(&priv->sd, priv->client, &max96717_subdev_ops);
> + priv->sd.internal_ops = &max96717_internal_ops;
> +
> + priv->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_STREAMS;
> + priv->sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
> + priv->sd.entity.ops = &max96717_entity_ops;
> +
> + priv->pads[MAX96717_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
> + priv->pads[MAX96717_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
> +
> + ret = media_entity_pads_init(&priv->sd.entity, 2, priv->pads);
> + if (ret)
> + return dev_err_probe(dev, ret, "Failed to init pads\n");
> +
> + ret = v4l2_subdev_init_finalize(&priv->sd);
> + if (ret) {
> + dev_err_probe(dev, ret,
> + "v4l2 subdev init finalized failed\n");
> + goto err_entity_cleanup;
> + }
> + ret = max96717_v4l2_notifier_register(priv);
> + if (ret) {
> + dev_err_probe(dev, ret,
> + "v4l2 subdev notifier register failed\n");
> + goto err_free_state;
> + }
> +
> + ret = v4l2_async_register_subdev(&priv->sd);
> + if (ret) {
> + dev_err_probe(dev, ret, "v4l2_async_register_subdev error\n");
> + goto err_unreg_notif;
> + }
> +
> + return 0;
> +
> +err_unreg_notif:
> + v4l2_async_nf_unregister(&priv->notifier);
> + v4l2_async_nf_cleanup(&priv->notifier);
> +err_free_state:
> + v4l2_subdev_cleanup(&priv->sd);
> +err_entity_cleanup:
> + media_entity_cleanup(&priv->sd.entity);
> +
> + return ret;
> +}
> +
> +static void max96717_subdev_uninit(struct max96717_priv *priv) {
> + v4l2_async_unregister_subdev(&priv->sd);
> + v4l2_async_nf_unregister(&priv->notifier);
> + v4l2_async_nf_cleanup(&priv->notifier);
> + v4l2_subdev_cleanup(&priv->sd);
> + media_entity_cleanup(&priv->sd.entity);
> +}
> +
> +struct max96717_pll_predef_freq {
> + unsigned long freq;
> + bool is_alt;
> + u8 val;
> +};
> +
> +static const struct max96717_pll_predef_freq max96717_predef_freqs[] = {
> + { 13500000, true, 0 }, { 19200000, false, 0 },
> + { 24000000, true, 1 }, { 27000000, false, 1 },
> + { 37125000, false, 2 }, { 74250000, false, 3 }, };
> +
> +static unsigned long
> +max96717_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
> +{
> + struct max96717_priv *priv = clk_hw_to_max96717(hw);
> +
> + return max96717_predef_freqs[priv->pll_predef_index].freq;
> +}
> +
> +static unsigned int max96717_clk_find_best_index(struct max96717_priv
> *priv,
> + unsigned long rate)
> +{
> + unsigned int i, idx;
> + unsigned long diff_new, diff_old;
> +
> + diff_old = U32_MAX;
> + idx = 0;
> +
> + for (i = 0; i < ARRAY_SIZE(max96717_predef_freqs); i++) {
> + diff_new = abs(rate - max96717_predef_freqs[i].freq);
> + if (diff_new < diff_old) {
> + diff_old = diff_new;
> + idx = i;
> + }
> + }
> +
> + return idx;
> +}
> +
> +static long max96717_clk_round_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long *parent_rate)
> +{
> + struct max96717_priv *priv = clk_hw_to_max96717(hw);
> + struct device *dev = &priv->client->dev;
> + unsigned int idx;
> +
> + idx = max96717_clk_find_best_index(priv, rate);
> +
> + if (rate != max96717_predef_freqs[idx].freq) {
> + dev_warn(dev, "Request CLK freq:%lu, found CLK freq:%lu\n",
> + rate, max96717_predef_freqs[idx].freq);
> + }
> +
> + return max96717_predef_freqs[idx].freq; }
> +
> +static int max96717_clk_set_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long parent_rate)
> +{
> + struct max96717_priv *priv = clk_hw_to_max96717(hw);
> + unsigned int val, idx;
> + int ret = 0;
> +
> + idx = max96717_clk_find_best_index(priv, rate);
> +
> + val = FIELD_PREP(REFGEN_PREDEF_FREQ_MASK,
> + max96717_predef_freqs[idx].val);
> +
> + if (max96717_predef_freqs[idx].is_alt)
> + val |= REFGEN_PREDEF_FREQ_ALT;
> +
> + val |= REFGEN_RST | REFGEN_PREDEF_EN;
> +
> + cci_write(priv->regmap, REF_VTG0, val, &ret);
> + cci_update_bits(priv->regmap, REF_VTG0, REFGEN_RST | REFGEN_EN,
> + REFGEN_EN, &ret);
> + if (ret)
> + return ret;
> +
> + priv->pll_predef_index = idx;
> +
> + return 0;
> +}
> +
> +static int max96717_clk_prepare(struct clk_hw *hw) {
> + struct max96717_priv *priv = clk_hw_to_max96717(hw);
> +
> + return cci_update_bits(priv->regmap, MAX96717_REG6, RCLKEN,
> + RCLKEN, NULL);
> +}
> +
> +static void max96717_clk_unprepare(struct clk_hw *hw) {
> + struct max96717_priv *priv = clk_hw_to_max96717(hw);
> +
> + cci_update_bits(priv->regmap, MAX96717_REG6, RCLKEN, 0, NULL); }
> +
> +static const struct clk_ops max96717_clk_ops = {
> + .prepare = max96717_clk_prepare,
> + .unprepare = max96717_clk_unprepare,
> + .set_rate = max96717_clk_set_rate,
> + .recalc_rate = max96717_clk_recalc_rate,
> + .round_rate = max96717_clk_round_rate, };
> +
> +static int max96717_register_clkout(struct max96717_priv *priv) {
> + struct device *dev = &priv->client->dev;
> + struct clk_init_data init = { .ops = &max96717_clk_ops };
> + int ret;
> +
> + init.name = kasprintf(GFP_KERNEL, "max96717.%s.clk_out",
> + dev_name(dev));
> + if (!init.name)
> + return -ENOMEM;
> +
> + /* RCLKSEL Reference PLL output */
> + ret = cci_update_bits(priv->regmap, MAX96717_REG3, MAX96717_RCLKSEL,
> + MAX96717_RCLKSEL, NULL);
> + /* MFP4 fastest slew rate */
RCLKOUT on MFP4 is a particular configuration but MFP4 can have other functions or
in some cases MFP2 is used as RCLKOUT so better to not hardcode this.
> + cci_update_bits(priv->regmap, PIO_SLEW_1, BIT(5) | BIT(4), 0, &ret);
> + if (ret)
> + goto free_init_name;
> +
> + priv->clk_hw.init = &init;
> +
> + /* Initialize to 24 MHz */
> + ret = max96717_clk_set_rate(&priv->clk_hw,
> + MAX96717_DEFAULT_CLKOUT_RATE, 0);
> + if (ret < 0)
> + goto free_init_name;
> +
> + ret = devm_clk_hw_register(dev, &priv->clk_hw);
> + kfree(init.name);
> + if (ret)
> + return dev_err_probe(dev, ret, "Cannot register clock HW\n");
> +
> + ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get,
> + &priv->clk_hw);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "Cannot add OF clock provider\n");
> +
> + return 0;
> +
> +free_init_name:
> + kfree(init.name);
> + return ret;
> +}
> +
> +static int max96717_init_csi_lanes(struct max96717_priv *priv) {
> + struct v4l2_mbus_config_mipi_csi2 *mipi = &priv->mipi_csi2;
> + unsigned long lanes_used = 0;
> + unsigned int nlanes, lane, val = 0;
> + int ret;
> +
> + nlanes = mipi->num_data_lanes;
> +
> + ret = cci_update_bits(priv->regmap, MAX96717_MIPI_RX1,
> + MAX96717_MIPI_LANES_CNT,
> + FIELD_PREP(MAX96717_MIPI_LANES_CNT,
> + nlanes - 1), NULL);
> +
> + /* lanes polarity */
> + for (lane = 0; lane < nlanes + 1; lane++) {
> + if (!mipi->lane_polarities[lane])
> + continue;
> + /* Clock lane */
> + if (lane == 0)
> + val |= BIT(2);
> + else if (lane < 3)
> + val |= BIT(lane - 1);
> + else
> + val |= BIT(lane);
> + }
> +
> + cci_update_bits(priv->regmap, MAX96717_MIPI_RX5,
> + MAX96717_PHY2_LANES_POL,
> + FIELD_PREP(MAX96717_PHY2_LANES_POL, val), &ret);
> +
> + cci_update_bits(priv->regmap, MAX96717_MIPI_RX4,
> + MAX96717_PHY1_LANES_POL,
> + FIELD_PREP(MAX96717_PHY1_LANES_POL,
> + val >> 3), &ret);
> + /* lanes mapping */
> + for (lane = 0, val = 0; lane < nlanes; lane++) {
> + val |= (mipi->data_lanes[lane] - 1) << (lane * 2);
> + lanes_used |= BIT(mipi->data_lanes[lane] - 1);
> + }
> +
> + /*
> + * Unused lanes need to be mapped as well to not have
> + * the same lanes mapped twice.
> + */
> + for (; lane < 4; lane++) {
> + unsigned int idx = find_first_zero_bit(&lanes_used, 4);
> +
> + val |= idx << (lane * 2);
> + lanes_used |= BIT(idx);
> + }
> +
> + cci_update_bits(priv->regmap, MAX96717_MIPI_RX3,
> + MAX96717_PHY1_LANES_MAP,
> + FIELD_PREP(MAX96717_PHY1_LANES_MAP, val), &ret);
> +
> + return cci_update_bits(priv->regmap, MAX96717_MIPI_RX2,
> + MAX96717_PHY2_LANES_MAP,
> + FIELD_PREP(MAX96717_PHY2_LANES_MAP, val >> 4),
> + &ret);
> +}
> +
> +static int max96717_hw_init(struct max96717_priv *priv) {
> + struct device *dev = &priv->client->dev;
> + u64 dev_id, val;
> + int ret;
> +
> + ret = cci_read(priv->regmap, MAX96717_DEV_ID, &dev_id, NULL);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "Fail to read the device id\n");
> +
> + if (dev_id != MAX96717_DEVICE_ID && dev_id != MAX96717F_DEVICE_ID)
> + return dev_err_probe(dev, -EOPNOTSUPP,
> + "Unsupported device id got %x\n", (u8)dev_id);
> +
> + ret = cci_read(priv->regmap, MAX96717_DEV_REV, &val, NULL);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "Fail to read device revision");
> +
> + dev_dbg(dev, "Found %x (rev %lx)\n", (u8)dev_id,
> + (u8)val & MAX96717_DEV_REV_MASK);
> +
> + ret = cci_read(priv->regmap, MAX96717_MIPI_RX_EXT11, &val, NULL);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "Fail to read mipi rx extension");
> +
> + if (!(val & MAX96717_TUN_MODE))
> + return dev_err_probe(dev, -EOPNOTSUPP,
> + "Only supporting tunnel mode");
> +
> + return max96717_init_csi_lanes(priv);
> +}
> +
> +static int max96717_parse_dt(struct max96717_priv *priv) {
> + struct device *dev = &priv->client->dev;
> + struct v4l2_fwnode_endpoint vep = {
> + .bus_type = V4L2_MBUS_CSI2_DPHY
> + };
> + struct fwnode_handle *ep_fwnode;
> + unsigned char num_data_lanes;
> + int ret;
> +
> + ep_fwnode = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev),
> + MAX96717_PAD_SINK, 0, 0);
> + if (!ep_fwnode)
> + return dev_err_probe(dev, -ENOENT, "no endpoint found\n");
> +
> + ret = v4l2_fwnode_endpoint_parse(ep_fwnode, &vep);
> +
> + fwnode_handle_put(ep_fwnode);
> +
> + if (ret < 0)
> + return dev_err_probe(dev, ret, "Failed to parse sink endpoint");
> +
> + num_data_lanes = vep.bus.mipi_csi2.num_data_lanes;
> + if (num_data_lanes < 1 || num_data_lanes > 4)
> + return dev_err_probe(dev, -EINVAL,
> + "Invalid data lanes must be 1 to 4\n");
> +
> + memcpy(&priv->mipi_csi2, &vep.bus.mipi_csi2, sizeof(priv->mipi_csi2));
> +
> + return 0;
> +}
> +
> +static int max96717_probe(struct i2c_client *client) {
> + struct device *dev = &client->dev;
> + struct max96717_priv *priv;
> + int ret;
> +
> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->client = client;
> + priv->regmap = devm_cci_regmap_init_i2c(client, 16);
> + if (IS_ERR(priv->regmap)) {
> + ret = PTR_ERR(priv->regmap);
> + return dev_err_probe(dev, ret, "Failed to init regmap\n");
> + }
> +
> + ret = max96717_parse_dt(priv);
> + if (ret)
> + return dev_err_probe(dev, ret, "Failed to parse the dt\n");
> +
> + ret = max96717_hw_init(priv);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "Failed to initialize the hardware\n");
> +
> + ret = max96717_gpiochip_probe(priv);
> + if (ret)
> + return dev_err_probe(&client->dev, ret,
> + "Failed to init gpiochip\n");
> +
> + ret = max96717_register_clkout(priv);
> + if (ret)
> + return dev_err_probe(dev, ret, "Failed to register clkout\n");
> +
> + ret = max96717_subdev_init(priv);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "Failed to initialize v4l2 subdev\n");
> +
> + ret = max96717_i2c_mux_init(priv);
> + if (ret) {
> + dev_err_probe(dev, ret, "failed to add remote i2c adapter\n");
> + max96717_subdev_uninit(priv);
> + }
> +
> + return ret;
> +}
> +
> +static void max96717_remove(struct i2c_client *client) {
> + struct v4l2_subdev *sd = i2c_get_clientdata(client);
> + struct max96717_priv *priv = sd_to_max96717(sd);
> +
> + max96717_subdev_uninit(priv);
> + i2c_mux_del_adapters(priv->mux);
> +}
> +
> +static const struct of_device_id max96717_of_ids[] = {
> + { .compatible = "maxim,max96717f" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, max96717_of_ids);
> +
> +static struct i2c_driver max96717_i2c_driver = {
> + .driver = {
> + .name = "max96717",
> + .of_match_table = max96717_of_ids,
> + },
> + .probe = max96717_probe,
> + .remove = max96717_remove,
> +};
> +
> +module_i2c_driver(max96717_i2c_driver);
> +
> +MODULE_DESCRIPTION("Maxim GMSL2 MAX96717 Serializer Driver");
> +MODULE_AUTHOR("Julien Massot <julien.massot@...labora.com>");
> +MODULE_LICENSE("GPL");
> --
> 2.44.0
>
Best regards,
Bogdan
Powered by blists - more mailing lists