| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 9 May 2024 09:18:59 +0800
From: Yu Kuai <yukuai1@...weicloud.com>
To: agk@...hat.com,
snitzer@...nel.org,
mpatocka@...hat.com,
song@...nel.org,
xni@...hat.com
Cc: dm-devel@...ts.linux.dev,
linux-kernel@...r.kernel.org,
linux-raid@...r.kernel.org,
yukuai3@...wei.com,
yukuai1@...weicloud.com,
yi.zhang@...wei.com,
yangerkun@...wei.com
Subject: [PATCH md-6.10 8/9] md: factor out helpers for different sync_action in md_do_sync()
From: Yu Kuai <yukuai3@...wei.com>
Make code cleaner by replace if else if with switch, and it's more
obvious now what is doning for each sync_action. There are no
functional changes.
Signed-off-by: Yu Kuai <yukuai3@...wei.com>
---
drivers/md/md.c | 123 ++++++++++++++++++++++++++++--------------------
1 file changed, 73 insertions(+), 50 deletions(-)
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 2fc81175b46b..42db128b82d9 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -8928,6 +8928,77 @@ void md_allow_write(struct mddev *mddev)
}
EXPORT_SYMBOL_GPL(md_allow_write);
+static sector_t md_sync_max_sectors(struct mddev *mddev,
+ enum sync_action action)
+{
+ switch (action) {
+ case ACTION_RESYNC:
+ case ACTION_CHECK:
+ case ACTION_REPAIR:
+ atomic64_set(&mddev->resync_mismatches, 0);
+ fallthrough;
+ case ACTION_RESHAPE:
+ return mddev->resync_max_sectors;
+ case ACTION_RECOVER:
+ return mddev->dev_sectors;
+ default:
+ return 0;
+ }
+}
+
+static sector_t md_sync_position(struct mddev *mddev, enum sync_action action)
+{
+ sector_t start = 0;
+ struct md_rdev *rdev;
+
+ switch (action) {
+ case ACTION_CHECK:
+ case ACTION_REPAIR:
+ return mddev->resync_min;
+ case ACTION_RESYNC:
+ if (!mddev->bitmap)
+ return mddev->recovery_cp;
+ return 0;
+ case ACTION_RESHAPE:
+ /*
+ * If the original node aborts reshaping then we continue the
+ * reshaping, so set again to avoid restart reshape from the
+ * first beginning
+ */
+ if (mddev_is_clustered(mddev) &&
+ mddev->reshape_position != MaxSector)
+ return mddev->reshape_position;
+ return 0;
+ case ACTION_RECOVER:
+ start = MaxSector;
+ rcu_read_lock();
+ rdev_for_each_rcu(rdev, mddev)
+ if (rdev->raid_disk >= 0 &&
+ !test_bit(Journal, &rdev->flags) &&
+ !test_bit(Faulty, &rdev->flags) &&
+ !test_bit(In_sync, &rdev->flags) &&
+ rdev->recovery_offset < start)
+ start = rdev->recovery_offset;
+ rcu_read_unlock();
+
+ /* If there is a bitmap, we need to make sure all
+ * writes that started before we added a spare
+ * complete before we start doing a recovery.
+ * Otherwise the write might complete and (via
+ * bitmap_endwrite) set a bit in the bitmap after the
+ * recovery has checked that bit and skipped that
+ * region.
+ */
+ if (mddev->bitmap) {
+ mddev->pers->quiesce(mddev, 1);
+ mddev->pers->quiesce(mddev, 0);
+ }
+ return start;
+ default:
+ return MaxSector;
+ }
+}
+
#define SYNC_MARKS 10
#define SYNC_MARK_STEP (3*HZ)
#define UPDATE_FREQUENCY (5*60*HZ)
@@ -9046,56 +9117,8 @@ void md_do_sync(struct md_thread *thread)
spin_unlock(&all_mddevs_lock);
} while (mddev->curr_resync < MD_RESYNC_DELAYED);
- j = 0;
- if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) {
- /* resync follows the size requested by the personality,
- * which defaults to physical size, but can be virtual size
- */
- max_sectors = mddev->resync_max_sectors;
- atomic64_set(&mddev->resync_mismatches, 0);
- /* we don't use the checkpoint if there's a bitmap */
- if (test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery))
- j = mddev->resync_min;
- else if (!mddev->bitmap)
- j = mddev->recovery_cp;
-
- } else if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery)) {
- max_sectors = mddev->resync_max_sectors;
- /*
- * If the original node aborts reshaping then we continue the
- * reshaping, so set j again to avoid restart reshape from the
- * first beginning
- */
- if (mddev_is_clustered(mddev) &&
- mddev->reshape_position != MaxSector)
- j = mddev->reshape_position;
- } else {
- /* recovery follows the physical size of devices */
- max_sectors = mddev->dev_sectors;
- j = MaxSector;
- rcu_read_lock();
- rdev_for_each_rcu(rdev, mddev)
- if (rdev->raid_disk >= 0 &&
- !test_bit(Journal, &rdev->flags) &&
- !test_bit(Faulty, &rdev->flags) &&
- !test_bit(In_sync, &rdev->flags) &&
- rdev->recovery_offset < j)
- j = rdev->recovery_offset;
- rcu_read_unlock();
-
- /* If there is a bitmap, we need to make sure all
- * writes that started before we added a spare
- * complete before we start doing a recovery.
- * Otherwise the write might complete and (via
- * bitmap_endwrite) set a bit in the bitmap after the
- * recovery has checked that bit and skipped that
- * region.
- */
- if (mddev->bitmap) {
- mddev->pers->quiesce(mddev, 1);
- mddev->pers->quiesce(mddev, 0);
- }
- }
+ max_sectors = md_sync_max_sectors(mddev, action);
+ j = md_sync_position(mddev, action);
pr_info("md: %s of RAID array %s\n", desc, mdname(mddev));
pr_debug("md: minimum _guaranteed_ speed: %d KB/sec/disk.\n", speed_min(mddev));
--
2.39.2
Powered by blists - more mailing lists