lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <23ea6dbd-1d4e-4aeb-900b-646db880cfb6@redhat.com>
Date: Thu, 9 May 2024 19:48:46 +0200
From: David Hildenbrand <david@...hat.com>
To: Luis Chamberlain <mcgrof@...nel.org>, Matthew Wilcox
 <willy@...radead.org>, Christoph Lameter <christoph@...eter.com>,
 Christoph Hellwig <hch@....de>, Dave Chinner <david@...morbit.com>
Cc: Daniel Gomez <da.gomez@...sung.com>,
 Baolin Wang <baolin.wang@...ux.alibaba.com>,
 "akpm@...ux-foundation.org" <akpm@...ux-foundation.org>,
 "hughd@...gle.com" <hughd@...gle.com>,
 "ioworker0@...il.com" <ioworker0@...il.com>,
 "wangkefeng.wang@...wei.com" <wangkefeng.wang@...wei.com>,
 "ying.huang@...el.com" <ying.huang@...el.com>,
 "21cnbao@...il.com" <21cnbao@...il.com>,
 "ryan.roberts@....com" <ryan.roberts@....com>,
 "shy828301@...il.com" <shy828301@...il.com>, "ziy@...dia.com"
 <ziy@...dia.com>, "linux-mm@...ck.org" <linux-mm@...ck.org>,
 "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
 Linux FS Devel <linux-fsdevel@...r.kernel.org>
Subject: Re: [PATCH 0/8] add mTHP support for anonymous shmem

On 08.05.24 21:23, Luis Chamberlain wrote:
> On Wed, May 08, 2024 at 01:58:19PM +0200, David Hildenbrand wrote:
>> On 08.05.24 13:39, Daniel Gomez wrote:
>>> On Mon, May 06, 2024 at 04:46:24PM +0800, Baolin Wang wrote:
>>>> The primary strategy is similar to supporting anonymous mTHP. Introduce
>>>> a new interface '/mm/transparent_hugepage/hugepage-XXkb/shmem_enabled',
>>>> which can have all the same values as the top-level
>>>> '/sys/kernel/mm/transparent_hugepage/shmem_enabled', with adding a new
>>>> additional "inherit" option. By default all sizes will be set to "never"
>>>> except PMD size, which is set to "inherit". This ensures backward compatibility
>>>> with the shmem enabled of the top level, meanwhile also allows independent
>>>> control of shmem enabled for each mTHP.
>>>
>>> I'm trying to understand the adoption of mTHP and how it fits into the adoption
>>> of (large) folios that the kernel is moving towards. Can you, or anyone involved
>>> here, explain this? How much do they overlap, and can we benefit from having
>>> both? Is there any argument against the adoption of large folios here that I
>>> might have missed?
>>
>> mTHP are implemented using large folios, just like traditional PMD-sized THP
>> are.
>>
>> The biggest challenge with memory that cannot be evicted on memory pressure
>> to be reclaimed (in contrast to your ordinary files in the pagecache) is
>> memory waste, well, and placement of large chunks of memory in general,
>> during page faults.
>>
>> In the worst case (no swap), you allocate a large chunk of memory once and
>> it will stick around until freed: no reclaim of that memory.
>>
>> That's the reason why THP for anonymous memory and SHMEM have toggles to
>> manually enable and configure them, in contrast to the pagecache. The same
>> was done for mTHP for anonymous memory, and now (anon) shmem follows.
>>
>> There are plans to have, at some point, have it all working automatically,
>> but a lot for that for anonymous memory (and shmem similarly) is still
>> missing and unclear.
> 
> Whereas the use for large folios for filesystems is already automatic,
> so long as the filesystem supports it. We do this in readahead and write
> path already for iomap, we opportunistically use large folios if we can,
> otherwise we use smaller folios.
> 
> So a recommended approach by Matthew was to use the readahead and write
> path, just as in iomap to determine the size of the folio to use [0].
> The use of large folios would also be automatic and not require any
> knobs at all.

Yes, I remember discussing that with Willy at some point, including why 
shmem is unfortunately a bit more "special", because you might not even 
have a disk backend ("swap") at all where you could easily reclaim memory.

In the extreme form, you can consider SHMEM as memory that might be 
always mlocked, even without the user requiring special mlock limits ...

> 
> The mTHP approach would be growing the "THP" use in filesystems by the
> only single filesystem to use THP. Meanwhile use of large folios is already
> automatic with the approach taken by iomap.

Yes, it's the extension of existing shmem_enabled (that -- I'm afraid -- 
was added for good reasons).

> 
> We're at a crux where it does beg the question if we should continue to
> chug on with tmpfs being special and doing things differently extending
> the old THP interface with mTHP, or if it should just use large folios
> using the same approach as iomap did.

I'm afraid shmem will remain to some degree special. Fortunately it's 
not alone, hugetlbfs is even more special ;)

> 
>  From my perspective the more shared code the better, and the more shared
> paths the better. There is a chance to help test swap with large folios
> instead of splitting the folios for swap, and that would could be done
> first with tmpfs. I have not evaluated the difference in testing or how
> we could get the most of shared code if we take a mTHP approach or the
> iomap approach for tmpfs, that should be considered.

I don't have a clear picture yet of what might be best for ordinary 
shmem (IOW, not MAP_SHARED|MAP_PRIVATE), and I'm afraid there is no easy 
answer.

As long as we don't end up wasting memory, it's not obviously bad. But 
some things might be tricky (see my example about large folios stranding 
in shmem and never being able to be really reclaimed+reused for better 
purposes)

I'll note that mTHP really is just (supposed to be) a user interface to 
enable the various folio sizes (well, and to expose better per-size 
stats), not more.

 From that point of view, it's just a filter. Enable all, and you get 
the same behavior as you likely would in the pagecache mode.

 From a shared-code and testing point of view, there really wouldn't be 
a lot of differences. Again, essentially just a filter.


> 
> Are there other things to consider? Does this require some dialog at
> LSFMM?

As raised in my reply to Daniel, I'll be at LSF/MM and happy to discuss. 
I'm also not a SHMEM expert, so I'm hoping at some point we'd get 
feedback from Hugh.

-- 
Cheers,

David / dhildenb


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ